How to make from paper step by step. Origami for beginners. Autumn leaf: step-by-step master class with photos. Small figure diagram

Children always demand attention. When choosing activities for children, many are interested in creativity and are looking for interesting ideas, including patterns for modular paper origami for beginners. IN in social networks Finding a master class in origami technique is not a problem. Experienced craftsmen They explain in detail how to create a triangular module and design diagrams for various crafts.

Module assembly technique

Step-by-step instructions for modular origami for beginners contains a method for making a module triangular shape and diagrams of three-dimensional figures using the origami technique.

Folding three-dimensional figures from identical paper parts is called modular origami. This activity is very labor-intensive, but at the same time exciting. By practicing modular origami techniques, children develop not only fine motor skills, but also mental and creative abilities.

First they learn to fold the module. Take sheets of A4 paper and fold them in half until you get 16 rectangles. Cut the sheets along the resulting lines into 16 parts.

To make crafts, diagrams are used that contain information about how many modules need to be made and what color they should be.

Mounting methods

The module has 2 corners at the edges and 2 pockets on the fold line. These parts of the triangle are involved in attaching the modules to each other. Triangles are placed in two ways - on long or short sides . Bonding options:

Take three elements. Two elements are placed next to each other with their long sides and 2 corners are inserted into the pockets of the third element standing on the short sides.
Two elements stand on the long sides, insert 2 corners of one triangle into the pockets of the second.
Two triangles stand on the short sides, one triangle is inserted with its corners into the pockets of the other triangle.

White paper fantasies

Modular origami for beginners, made of white paper looks very impressive. It is used to make a bunny, a dog, an owl, a rose, a daisy, a dove, and a white swan.

White Rose

Take a sheet and fold it into 32 parts. Blanks are made from small rectangles, 110 white blanks in total.

The first 3 rows are made up of 18 blanks. In the 1st row and in the 3rd row, place the modules with the short sides up, 2nd row - with the long side up.

Take 8 modules, insert the short side down. The tops of the modules are pressed against each other, and the rosebud is ready. Cocktail straw pasted over with green paper and glued to a rosebud.

The first crafts from modules

Small origami figures made from modules are not inferior to large structures; they are also beautiful and interesting. Beginners can easily collect a Christmas tree, lemon, strawberry, flower, watermelon rind, and small swans.

Step-by-step instructions for constructing a Christmas tree:

To make a small lemon, you need to make 96 dark yellow, 16 white, 16 yellow modules. Each row of modular lemon consists of 16 blanks, which are placed with the short side up. The bottom of the lemon consists of three rows of modules. Yellow blanks are placed in the first row, white in the second row and dark yellow in the third row. After this, make another 5 rows of dark yellow modules. The lemon is ready.

Flower for Beginners

Master class for beginners: simple daisy flower.

The masters offer beginners step-by-step instructions on how to make a modular origami swan out of paper. You can make a small white swan, a large swan and a “Swan Princess”.

Small figure diagram

To make a baby swan, requires 22 dark yellow triangles, 120 white and 1 red triangle. The first circle and all subsequent circles of the figure little swan are made up of 15 blanks.

The swan's body is made up of 3 rows of elements, then the product is connected and raised with the corners of the triangles upward, the 4th, 5th, 6th, 7th rows of blanks are inserted from top to bottom. Having completed the 7th row, they begin to fold the wings. The wing is assembled anywhere from a blank of 6 elements.

The wing begins to be made from 1 dark yellow element, 4 white elements, again 1 dark yellow color. Subsequently, each row of the wing is reduced by one white element, while the dark yellow modules remain at the end of each row. The work is completed when only 1 dark yellow module remains. The second wing is made in the same way. The neck is folded, putting 15 white pieces into a triangle and at the end 1 red one - a beak. The finished strip is inserted between the red modules. Usually a whole family of small swans is put together.

Great white swan

The big white swan is made up of 355 white modules and 1 red one. When working on a craft, make sure that the direction of the modules matches.

The swan's body begins to be built according to the scheme:

To make the “Swan Princess”, you must follow the step-by-step instructions and assembly diagram.

For constructing three-dimensional figures You must have hard work and perseverance. Handmade crafts are the most valuable and expensive! She best gift for family and friends!

Attention, TODAY only!

Of all the materials for creative works occupies a special place plain paper: It is used for many crafts. Adults and children love to work with this material. Easy origami crafts made from paper are available for children from 3-4 years old. Any creative activities contribute to the intellectual development of children.

Origami (folding paper figures) has long been a real art: its history goes back several centuries. If previously it was available only to monks and members of the nobility, then with the spread and availability of paper sheets, this type of creativity has gained popularity in many countries around the world.

Small children do not like to sit in one place: children are attracted by the novelty of the world around them. But from the age of 3, it is necessary to prepare the baby for school. The main requirements for the behavior of fidgets are perseverance, the ability to remember and assimilate new knowledge. Can help develop these and other character traits different kinds creative works made with your own hands.

Crafts develop fine motor skills, teach accuracy and perseverance. First of all, origami classes are:

development of spatial thinking, logic and memory;
introduction to the basics of mathematics, geometric shapes, development of the child’s mathematical abilities;
ability to read diagrams and drawings;
development and training fine motor skills;
fostering perseverance, dedication, scrupulousness and accuracy;
knowledge of beauty and harmony.

What to do with a child at home, how to make the baby sit quietly for at least some time - these questions often worry parents. Folding paper figures will not only calm the restlessness, but will also develop many useful qualities in the little man.

The availability of this type of pastime is also determined by the availability of material. The stores offer ready-made sets of colored, corrugated, velvet, and metallized paper. But for simple and easy crafts, you can use old newspapers.

It is believed that children over 3-4 years old can create paper figures using the origami technique. However, there are several simple models of figures that a two-year-old toddler can make. Children begin to be introduced to simple paper origami in preschool institutions.

At home, mommy can organize lessons for the baby herself, creating light and beautiful figures from paper.

There are many available on the Internet simple origami from paper for beginners - diagrams with step by step instructions for assembling paper models.

The first models for children from 3 years old

Currently, in addition to classic origami, there are other types of it, but for beginners and young children, it is best to start getting acquainted with the world of origami with the simplest classical patterns. Classic origami- this is the folding of models from square sheets of paper, without using any glue or scissors when creating figures.

To the very simple crafts for beginners include: airplane, boat, tulip, dog or cat. Let's look at how to make these figures step by step.

Tulip

A simple model of this flower can be assembled by a very small child with the help of his mother. How older child, the more complex schemes for creating a tulip are available to him: they turn out already voluminous, with open buds. A simple scheme for a child from 2 years old will allow him to do beautiful craft, and will give mom a reason to be proud.

Stage one

Take a red square piece of paper. Help your baby fold it diagonally. Unfold the sheet and fold it in half along the second diagonal.

Stage two

Bend the corners of the resulting triangle from the center line. Bend the lower sharp tip of the bud. You have a tulip bud.

Stage three

Take a square green piece of paper. Bend the corners, directing them towards the diagonal of the square.

Stage four

Fold the resulting figure in half. You will get a green triangle. Fold the bottom corner of the figure - you have a tulip stem.

Stage five

Connect the flower and stem on a thick paper base. The result is a tulip applique using the origami technique. The craft looks very beautiful. The baby can give this card to his mother or grandmother.

This simple circuit, where there are no complex bends. The baby can master this craft under the guidance of his mother.

Familiarity with the technique of creating a dog will help you create an animal.

Dog

Stage one

Fold the paper square diagonally. There should be a triangle in front of you, in which the right angle is directed downwards.

Stage two

Fold the top two corners down to form ears.

Stage three

Fold the bottom corner of the craft up - you get the face of a dog.

Stage four

Let the child draw the doggie's eyes and nose. He will color his craft the way he likes.

Panda

White paper required. Prepare a black pencil, felt-tip pen or paint. For pandas, white and black colors are relevant.

Stage one

It is necessary to outline the fold lines. To do this, fold the square sheet diagonally twice, and the corners on the left and right side bend forward.

Stage two

Bend the resulting upper corner in the opposite direction.

Stage three

Make the resulting panda face smaller at the edges.

Stage four

Bend the bottom corner forward. For the spout, fold the corner of the top edge down.

Stage five

Let's draw a face.

Light figures include cars and tanks. More complex models are images of birds and insects. Children 8-9 years old can already make human origami on their own. Creating such a figure requires an understanding of classical folds and developed motor skills baby's fingers.

To create a New Year's mood, there are many light models of Christmas trees and volumetric snowflakes made by classical technique origami. Paper rings are very popular among girls. However, such models are quite complex for novice craftsmen. To learn the technique of creating a paper ring, you can take a look at special master classes.

DIY toys

TO first lung toys include finger puppets. With their help you can organize theatrical performances for children. You can make paper fingertips for animal figures. For dolls you can create beautiful outfits, furniture for doll houses.

Older children make more complex models that they play with.

Let's look at easy paper origami patterns for creating a frog and an airplane.

The most popular type of craft. You can do it in a few minutes. Any sheet of paper is suitable for creation.

Stage one

Take a piece of landscape paper rectangular shape. Fold it in half lengthwise. Unbend.

Stage two

From the side where the nose of the plane will be, bend the corners 2 times, directing them towards the center line: first at a right angle, the second time at an acute angle.

Stage three

Bend the pointed tip of the spout in half, pointing it toward the center of the airplane's diverging wings.

Stage four

Bend the resulting airplane blank in the middle.

Stage five

Bend the resulting model in the middle, clearly forming the wings.

Such an airplane can be made from an ordinary notebook sheet or a newspaper page, and you can arrange a competition with your child to see which airplane flies further. This type easy craft is one of the simplest and favorite among children and many adults. Sometimes landscape sheets are used to create airplanes. The craft becomes heavier, but more resistant to wind.

jumping frog

A paper frog that can jump is a favorite among children of all ages. Schemes on how to easily make a jumping frog can be found in different versions. Let's consider the classic scheme.

Stage one

It is necessary to fold the square sheet twice diagonally. In front of you is a rectangle with two squares.

Stage two

Fold the top square along two diagonals as well. Expand. Gently pull the opposite triangles on the left and right with your fingers towards the center. Fold the square at the bottom in half.

Stage three

Point opposite sides toward the center. Bottom part fold in half again.

Stage five

Bend the two upper corners of the bottom down. Pull the resulting pieces along the fold, straightening them. If you bend the resulting corners, the lower legs of the frog will come out. For the upper legs, fold the upper triangles to the sides.

Stage six

The lower part of the resulting torso is bent in half. Then bend it down a little. Turn over - the jumping frog is ready. You can draw eyes on her.

These easy crafts will captivate your child into the world of origami for a long time.

Alexandra is a regular expert on the PupsFull portal. She writes articles about games, pregnancy, parenting and learning, child care and the health of mother and child.

Origami is the art of folding all kinds of crafts using paper. In most cases, the activity does not involve the use of glue and scissors. This trend arose in 610, when the secret of paper making came to Japan from China. The monks learned to fold figurines, which decorated temples and were used in rituals. In the Middle Ages, this decorative and applied art became an element of the culture of Japanese aristocrats. If you want to learn this hobby, this article contains interesting schemes from origami paper.

Origami for beginners

This skill is reminiscent of a magic trick - a beautiful figure is born from a simple leaf in a few minutes. The activity does not require large material costs and is absolutely safe even for small children. Origami allows you to create a whole world without special abilities. This hobby develops spatial imagination, fine motor skills, motor and spatial memory, concentration, communication and gaming abilities, horizons, and creative skills in beginners. The paper diagrams below will help you make original, unusual toys, gifts, and figurines.

What materials will be needed

Before you start doing origami, you should stock up on the necessary set of tools. First, you should choose paper, preferably office paper, since it is not too smooth and is thick enough for folding according to patterns. To attach small parts and gluing, you will need a glue stick or PVA glue, and aerosol glue is necessary if you need to glue two different-colored sheets of paper. The last technique allows you to create interesting crafts using a combination of textures and colors.

You can use a more convenient adhesive mass, with which any part can be easily attached inside or outside the craft, and then removed if necessary, without leaving any traces. If the craft is made from white paper, then it is then covered with spray paint. Sometimes several pairs of sharp bladed scissors are required different shapes and length. In some cases it is possible to replace them with a cutter. This tool is necessary for trimming and cutting straight lines. The blade must be sharpened to obtain a smooth, neat cut.

To mark according to the diagram when folding figures, cutting out the base, maintaining a certain angle of assembly, and symmetrically placing a composition based on a panel, triangles, rulers, and protractors are needed. You will need a mechanical pencil with a replaceable thin lead. Additionally, needlewomen use ready-made eyes for toys, leftover yarn, ribbons, fabric, beads, seed beads, sequins for decoration, and thread and needle for connecting individual parts.

Paper selection

From the right choice paper depends on the result of the work, since the whole process of creating origami according to diagrams consists of folding and bending. The list below will help you decide which material is better and which is worse suitable for this type of needlework:

Office white paper is thick, not too smooth, so the modules hold well when connected. It’s better to start practicing origami with such material, since it’s a shame to throw away a damaged model. Its disadvantage is that hairiness appears at the bend.
Colored office paper - does not turn white when folded, is dense, and is used in modular origami.
Sticky notes, note paper – can be painted different colors, used to create kusudama, in modular origami.
School colored paper– thin, friable, easily torn, not suitable for this hobby. It wears off on the folds and white stripes appear.
Foil paper is durable, does not tear, is used when creating complex patterns, twisted models, and modules. When straightened, the folds remain in tight stripes.
The pages of glossy magazines are dense, bend well, and hold their shape.
Banknotes are durable, do not wear out on folds, and are suitable for small modules and making gifts.
Special paper for origami - sold in sets, with a variety of patterns, can be double-sided, monotonous.
Rice, papyrus, craft, parchment, tissue, mulberry, silk and other expensive types of paper - each type has its own advantages and disadvantages, allowing you to create interesting crafts according to patterns.
Drawing graph paper, tracing paper - suitable for first attempts at creating complex works.

Types of origami in pictures

Origami is a great opportunity to keep yourself busy with something interesting, useful, and have fun while developing new skills and abilities. In addition to the classical direction, there are many other alternative techniques:

How to learn to make animals - diagrams for children

Children's pranks and inability to sit in one place are often due to the fact that the baby has nothing to do, and energy needs to be directed in a certain direction. Invite boys and girls to do origami, which will calm them down, captivate them, and make them feel like little wizards working miracles. This is a useful hobby that develops attention, patience, artistic taste, and thinking. Learning how to make origami animals is simple: take a piece of paper, fold it according to the diagram below and get a funny little animal.

How to make a box with a lid

An origami box is an irreplaceable thing that will be useful for a gift. You can roll it up in a matter of minutes. To create, you don't need any glue or scissors, just a couple of pieces of paper. For the box it is better to choose a colored one beautiful paper. As you work, remember that the lid must be larger than the base. On top, you can decorate the box according to the occasion: with ribbons with New Year's prints, buttons, and other decorative items. Step-by-step instruction:

We draw the sheet from one corner to the opposite corner diagonally.
We bend one corner to the center.

Let's do the same with the other corners.
We bend two corners back, fold the remaining ones in half flush with the center line, as in the photo.

Let's do a similar procedure with the other two corners. The result is a blank, as in the photo.
We make cuts.

We bend two corners to the center.

Next we fold it as in the photo.

This turns out to be the bottom part of the box. In the same sequence, we make the cap 5 mm larger on each side.

Beautiful flowers - paper rose

Origami rose is a popular craft using this technique. It is made quickly and easily from one square sheet paper, painted red on both sides. Step-by-step instructions:

Fold the sheet in half.
Fold it in half again.

Uncover and flatten the top layer.
Turn the workpiece over and turn over the square.
We repeat the third step.

Bend two corners towards the top.
Bend the triangles in half, marking the lines.

Open and flatten the triangles by pulling the corners down.
We bend the upper parts of the resulting pockets down.

For the second side, repeat steps 6-9.
Make a fold by bending the top corner.

We open the lower part of the workpiece like a book.
We take the places indicated in the picture, pull, flatten so that we get two triangles on the side.

Turn the workpiece over.

We raise the triangle.

We bend the lower right square from top to bottom diagonally.

Turn the product 180 degrees. We repeat the previous stage.

We place the workpiece on the left palm. With your fingers right hand We take hold of the walls of the craft, twist it clockwise until we get a rose. We curl the petals beautifully with a pencil or thin stick.

Modular 3D origami made of white paper - swan

Modular origami allows you to create very beautiful, volumetric crafts. This master class shows you step by step how to assemble a beautiful swan. This product can become a decoration for your home. Step by step instructions:

According to the scheme, we make 458 white triangular modules. One orange or red for the beak.
We take three modules, insert the corners of two into the pockets of the third.

Let's add two more.
Using the same scheme, we add two modules.

We position the structure as shown in the photo.
We insert the corners into the pockets.

We assemble three rows in this way, each of which consists of 30 modules. We close in a circle.
We put on the fourth and fifth row modules in the same way.

We take the workpiece, gently press the center with our thumbs, turning the product inside out.

We bend the edges up.

We put on the sixth row, arranging the modules in a checkerboard pattern.
In the seventh layer we make wings: put on 12 modules, skip two corners, attach 12 more. On the missing narrow section there will be a neck, and on the remaining wide section there will be a tail.

In the next row we reduce the wing by one module.
Similarly, reduce each row until one triangle remains.

We make the tail according to the principle of decreasing by one module in each new layer.
We make the neck and head 10 white and 1 red module, on which you need to glue the corners so that the beak is not forked. The neck is assembled like this: we insert the corners of one into the pockets of the other module.

So we collect the rest, arching our necks.
We place the neck in the right place.

What else can be made from paper: assembly diagrams

All kinds of origami techniques allow you to make a lot of interesting crafts. This is an ideal pastime for a child in the form of play. Such decorative and applied art does not stand still: it gradually gained experience and was transformed, as a result of which many schemes for assembling various figures of snowflakes, cars, airplanes, furniture, animals, etc. arose.

Fighter aircraft

Many in childhood folded airplanes from torn out school notebook leaves and launched them at recess, watching the flight. In the origami technique there are a lot of options and forms of this craft, from the simplest to the most complex models. The diagrams below clearly demonstrate the assembly of fighters, which will require a little patience and paper.

Cars

The next popular paper craft is a typewriter. Every boy loved to play with them in childhood. If you don’t know how to make one, the following easy diagrams of racing and regular cars, trucks, and police cars will help you. If you follow the instructions, assembling the model will not take much time, and the result will be excellent.

Minecraft

Minecraft is a sandbox construction computer game. It allows players to create, destroy various blocks, and use objects in the surrounding 3D environment. If you are familiar with the game Minecraft, you will be interested in creating its blocks and heroes using the origami diagrams below. You can use white paper and draw the desired image on it, or print out templates.

Furniture

It's very fun to make origami furniture using paper patterns. You can create a window, a sofa, a table, a bed, a desk, an armchair. Such crafts are suitable for future children's games, creating dollhouse, applications. You can choose any paper, in different shades. By creating several figures, you will receive whole set miniature furniture. All patterns are easy, so even a child can do crafts.

Snowflake

Paper snowflakes origami and kirigami – great way decorating your own home New Year's holidays. You can hang such crafts near windows, on a Christmas tree, on a chandelier, make a garland out of them and hang them along the walls, or a children’s mobile. Each pattern allows you to create a unique, inimitable snowflake. Finished goods You can paint it with silver, blue and glitter colors with spray paint, or apply glitter glue along the edges to make the decoration even more interesting.

Making figures from multi-colored modules will diversify leisure time and become a common interest for family members. Even a novice master, having mastered the basics of origami, will be able to surprise others with exclusive crafts.

Origami is the oriental art of creating decorative figures from paper, which includes several types. Modular origami is its integral part.

Types of origami:

Name	Description
Modular	The craft is assembled from parts of the same size, which are folded in a certain way. Figures are obtained by nesting modules into each other. Glue is not used when creating them, but for strength in complex models, adhesive connections are allowed.
Simple	The figure is made from one sheet of paper. Suitable for developing fine motor skills in children.
Wet folding	When working, the paper is moistened with water, which allows you to create crafts with smooth lines. Suitable for this technique thick paper, treated with water-soluble glue.
By pattern	Folding the figure according to the diagram. The drawing shows all the folds of the future model, and special symbols have been developed. A convenient way to make complex crafts

There are at least 10 types of origami modules. Flat ones are used to create mosaics; three-dimensional parts are used to form balls and shapes. Modules in the shape of a trefoil and triangle are common. Pyramid-shaped blanks are used to create kusudama - bright balls.

Materials for work

The paper for modular origami is chosen to be durable, not glossy, to avoid unnecessary slipping. The paint on the folds should not rub off.

office white and colored, quite durable and rough;
stickers, writing pads;
Kami – Japanese origami paper;
magazine matte;
wrapping;
gift (packaging);
foil.

Colored school paper is not suitable for work; it is thin and turns white on the folds. Cardboard modules do not roll well. Newspapers are suitable for beginners, they are not durable and turn yellow over time.

Preparing for work

Before starting to create modular figures, they stock up on paper of the required colors and make modules. Triangular modules are folded from rectangular sheets with an aspect ratio of 3:2.

Manufacturing:

Fold the A4 sheet in half, then 3 more times. There were 32 rectangles on paper. Modules of the popular 1/32 size are assembled from them. If you need details bigger size, leave 8 or 16 parts.
Cut the paper into rectangles with scissors or a stationery knife.
Fold the part lengthwise, then widthwise. There is a control line in the middle.
Fold the sides of the rectangle towards the middle, as when assembling an airplane, and turn the workpiece over to the other side.

The extreme corners of the parts protruding from below are bent upward, to the base of the triangle.
The lower part of the workpiece is raised. The result is a triangle.
Bend the triangle along the midline. The module is ready.

The piece has 2 corners at the front and 2 pockets at the back. With their help, the modules are connected to each other.

Module assembly technique

The module when folded is a straight triangle. The hypotenuse is called the long side, the leg without pockets is called the short side.

The configuration of the craft depends on the method of connecting the modules:

The corners of one triangle are respectively inserted into the pockets of the other. So, from several parts, a flat strip is obtained, which is used to make the tails, necks, and legs of the figures.
The top of one triangle is inserted into the pocket of the second, then the top of the second is inserted into the pocket of the third. The connection is used to create long chains, the basis of figures.

To connect 3 modules, the adjacent vertices of two parts are inserted into the pockets of the third.
The rows are obtained by stringing a triangle onto adjacent corners of the parts of the bottom row. Depending on the scheme, the module is put on 1, 2 or 3 vertices.

The long side up method means that the module is put on with the hypotenuse forward, towards the assembler. Short side forward means that the triangle is strung with the leg forward. The usual method for assembling rows is with the long side facing up.

Paper flowers

Modular origami for beginners is mastered by creating simple shapes. Using this technique, you can recreate a flower or come up with your own image of a plant. Such crafts are made from modules measuring 1/32 so that the figure turns out graceful and close to the original.

They decorate festive table, given on March 8th or birthday. Large modules are used to make large flowers that decorate the room for a celebration.

Lotus or water lily

The lotus, made using the modular origami technique, consists of 6 green leaves on which a two-color bud with a core is placed. For work, 240 pink, 126 dark pink, 50 yellow and 318 green triangles are prepared.

Modular origami for beginners: step by step production lotus

Procedure:

They start by making diamond-shaped leaves. 2 elements are inserted into the first green module, 1 triangle is added in the remaining rows. After a strip of 7 triangles in each next row, their number is reduced by 1. To connect two leaves, use 4 additional modules, which are inserted reverse side. All 6 pieces are fastened together.
Similarly, 6 bud petals are made from pink triangles; the longest row of the workpiece consists of 5 modules.
The finished parts are laid out in a row and the petals are connected with the first dark pink module in the middle. Then they fill the rest of the space and close the two-color stripe into a ring. 3 rows are laid along the bottom of the flower, alternating light and dark triangles.
The yellow elements are used to make a core, 5-6 pieces in a row. The bud is placed on the leaves and the middle is inserted into it.

The bud can be made variegated or plain, and rows of dark or light modules can be laid along the edge of the leaves. If you remove the core from a flower, the lotus will turn into a vase.

Lily

A variegated royal flower will be made from 230 orange and 50 brown blanks. The lily consists of 5 petals; long stamens made of paper or other materials are inserted in the middle of the flower. The stem is formed from 3 cocktail tubes.

Modular origami for beginners: step-by-step making of a lily

Procedure:

All petal modules are inserted into the pockets with the long side. The first 3 rows are made from orange modules, gradually connecting 2, 3 and 4 parts.
Add a brown element to the 4th row - 1 orange, 1 brown, 1 orange triangles. Along the edges, one corner of the modules of the previous row is left free.
The 5th row consists of 4 orange modules, the 2 outer parts are put on, capturing the free corners from the 3rd row so that the side of the petal is smooth.
The 6th row is assembled from 5 modules: orange, brown, orange, brown, orange. Row 7 is assembled from 6 orange parts.
In the 8th row, 4 orange and 3 brown modules alternate, starting and ending the row with yellow elements.
The 9th row consists of 6 orange triangles; to decrease in this and the next rows, the outer modules are placed on the 3 tops of the parts of the 8th row.
In the 10th row, 3 orange and 2 brown parts are placed in a checkerboard pattern.
Row 11 is formed from 4 orange modules, row 12 - orange, brown, orange elements. The petal is finished with rows of 2 and 1 modules.
The finished petals are bent to resemble a living flower and connected at the base with brown parts. A wire is inserted into the stamens and passed through the middle of the lily.
For the stem, 3 tubes are secured with wire from the flower stamens and covered with corrugated paper. Leaves are placed on the stem.

A delicate lily will be made from white and pink modules. A flower made from details in contrasting shades looks original.

Narcissus

To make a daffodil, you need 16 white modules and a 2.5 cm wide strip of double-sided yellow paper for the core. A cocktail tube is used as a stem.

Modular origami for beginners: step-by-step making of a daffodil

Procedure:

Lay out 8 modules in a circle, with the short side towards the middle and attach the remaining 8 triangles to them. To do this, the corners of two adjacent parts of the 1st row are inserted in a circle into the pockets of the same module of the external chain. It turned out to be a two-row ring, these are petals.
One side yellow paper strip cut into fringes, rolled into a tube and lightly sealed. The finished center is inserted into the head of the daffodil.
A cocktail straw is wrapped in a green stripe. corrugated paper and glue it, 1 cm does not reach the edge of the tube.
The free end of the tube is cut into 5 parts, coated with glue and inserted into the flower.
A strip of corrugated paper is glued in half, allowed to dry, and a long sheet is cut out and glued to the stem.

Several daffodils will make spring bouquet for mom, grandma or sister.

Rose

The rose is made from 95 modules and a cocktail straw. You can take juice tubes, then you need to insert them one into the other to lengthen them.

Procedure:

The bud is collected from top to bottom, gradually narrowing the figure. Rows 1, 2 and 3 consist of 15 triangles. Elements of the 2nd row are put on with the long side up, and 3rd rows - with the short side up. A three-row ring is formed, this is the top of the flower.
The 4th row continues in a circle, the triangles are put on the 3 corners of the module of the previous row. The 5th, 6th, 7th rows consist of 10 elements connected to the previous row in the usual way - 1 module per 2 adjacent ends.
10 modules are inserted into the lower part of the flower, like petals. For reliability they are glued.

The straw is wrapped in a strip of paper in a spiral and sealed. At the top of the stem, a thickening is formed from paper, equal in diameter to the hole in the rose. Leaves are cut out of paper and glued to the stem. Coat the top of the stem with glue, insert it into the bud, and press for a few seconds.

White Rose

A snow-white flower will be made from 110 modules measuring 1/32. Regular office paper will do.

Procedure:

Assemble a ring of 3 rows of 18 modules each. In rows 1 and 3 they are placed with the short side forward. Parts of row 2 – long side up.
In the 4th row, each element is put on 3 tails of the parts of the bottom row. Then assemble 2 rows of 12 pieces and 1 row of 12 triangles, short first.
In the last row, 8 triangles are placed with the short side facing out, inserting them into the 3 corners of the previous strip.

The bud is ready, the cocktail tube is wrapped in a strip of paper, and the cut out leaves are glued on. The rose is placed on a stem coated with glue.

Swan

Modular origami for beginners will interest people who want to create volumetric figures birds and animals. To make a swan you will need 458 white modules and 1 red one for the beak. A large figure will be made from triangles measuring 1/16. For strength, the tops of the parts are lubricated with glue.

Procedure:

Assembly begins with the body of the bird. In the 1st row, 30 triangles are placed with the long side outward; 30 modules of the 2nd and 3rd rows are put on them with the short side outward. The corners of 2 adjacent modules fit into the pockets of one triangle of the next row. The strip is closed into a ring and the 4th and 5th rows are laid in the same way. The figure is turned inside out, resulting in a bowl-shaped piece. Add a 6th row of 30 pieces.
The wings are formed from the 7th row. Leave 2 tops of adjacent triangles free - this is the place for the neck. 12 modules are put on to the left and right of the gap. There is a free area at the back for the tail. The wings are assembled, for which in each subsequent level the number of parts is reduced by 1. The last row consists of 1 module. The wings are arched to create the effect of a bird taking off.
The tail is made similarly to the wings, the number of modules in the rows is reduced to 1 triangle.
The neck consists of 31 pieces; it is assembled from the beak by inserting the corners of one module into the pockets of another. To prevent the beak from looking double, it is glued. During the assembly process, the bird's neck is bent. The eyes are glued next to the swan's beak and the neck is inserted into the space between the wings.

If you make a beak and a crown from golden paper, you will get a swan princess. A black bird with wings edged with white stripes and a butterfly on its chest looks presentable. Children love colorful swans.

Watermelon

To create a watermelon slice you need 114 red, 66 green, 17 white and 16 black blanks. They are inserted with the long side up, except for the first row - its parts are placed with the short side up.

Procedure:

Start assembly with 15 green modules. Rows 2, 3, 4 are assembled from green triangles of 14, 15, 16 pieces.
In the 5th row: 2 green, 13 white, 2 green. 1 green triangle is placed at the beginning and end of the 6th row, 1 white triangle is inserted next to them, the middle of the chain consists of 12 red modules. Row 7 begins and ends with 1 white element, with 13 red elements placed inside.
Row 8 consists of 14 modules, red ones alternate with black ones. Row 9 is formed from 13 red ones, the following rows are reduced by 1 module.
In rows 10 and 12, red and black parts are placed sequentially, according to the pattern. Row 11 and 13 to 21 are assembled from red modules. The last 21 row consists of 1 triangle.

Hare

To make a hare in a sweater, fold 402 white and 120 multi-colored modules. For a figure without clothes, take 520 parts of the same color.

Procedure:

For the first 3 rows, take 24 parts each, form a three-row strip and close them into a ring. Turn it inside out, resulting in a workpiece in the form of a wide vessel.
The 4th row is assembled from 24 colored parts - the beginning of the sweater. They are not inserted all the way, but are secured higher and the lower corner is moved forward to add volume. 4 more lanes are laid in the same way.
For 1 row of the head, take 24 triangles and put them on with the short side forward. In the second row, 6 parts are added. In this and the next 6 rows, the parts are strung with the long side up.
The ear begins to be assembled from 6 triangles. They are connected to the last row of the head with the short base forward. Row 2 consists of 5, row 3 – of 6 parts. The outer triangles are strung on the last vertices of the 2 lower modules. This is how 7 rows are assembled. Row 8 consists of 5 triangles, the outer parts are placed on the 3 tops of row 7. Row 9 – 4 triangles, 2 middle ones are placed above the 2 outer ones. They skip 2 head modules and assemble another ear.

Cut out and glue on the hare's eyes and nose, collar and bow tie. Arms are cut out of cardboard and attached to the sides of the body. If you cut a strip of paper into a fringe, twist it onto a pencil and glue it, you get bangs.

Penguin

Modular origami for beginners allows you to practice this technique with early age. For example, a child can assemble a penguin. To assemble this bird, take 129 black, 1 orange and 76 white modules.

Sequencing:

Row 1 is assembled from 10 black and 6 white parts, installed with the short side up. In the 2nd row there are 7 white and 10 black, they are placed with the long side up.
In the 3rd row, 6 white and 10 black blanks are put on with the long base up. Roll the three-row strip into a ring and form a bowl.
In the 4th row - 9 black and 7 white, in the 5th row - 10 black and 6 white, in the 6th row - 7 white and 9 black triangles. Row 7 - 10 black and 6 white elements.
Row 8 - beginning of the head, 9 black and 7 white parts. In the 9th row there are 10 black and 6 white parts. In the 10th row there are 9 black and 7 white blanks.
Row 11 – 10 black and 6 white, the next strip is similar to row 10. In the 13th row there are 11 black modules. The top of the figure is compressed.

An orange beak module is inserted in the center of the head, and black triangles - wings - are placed on the sides. Cut out and glue the penguin's eyes.

Owl

A small two-color owl is assembled from 62 white, 7 orange, 157 blue and 2 black modules.

Procedure:

Row 1 – 13 blue and 5 white triangles, short side first. White blanks are placed between blue ones, this is the beginning of the chest. Row 2 is formed from 6 white and 12 triangles with the short base forward and completes the ring.
In the 3rd row, 5 white and 13 blue parts are placed with the short base forward.
In rows 4, 5, 6, the parts are placed with the long base facing up. Row 4 – 6 white and 12 blue, Row 5 – 5 white and 13 blue, Row 6 – 6 white and 12 blue triangles.
Row 7 is laid from 5 white and 13 blue parts with the short base forward.
In the 8th row, 2 central white modules are placed with the short side forward, 4 white and 12 blue - with the long base forward.
In the 9th row, an orange triangle-beak is inserted in the center of the white area, to the right and left of it are 2 white and 13 blue parts.
In the 10th row, 2 white triangles are placed in the middle, 1 white and 1 black element are inserted on either side of them, and continued with 12 blue triangles. In the 10th and subsequent rows, the triangles are put on with the long side forward.
In the 11th row, 1 blue element is placed above the beak. On both sides of it, 2 white modules are laid. The row ends with 13 blue back triangles.
The 12th row consists of 8 blue elements located in the center of the figure. To make the ears, 3 blue parts are hung on the sides of this row. Then 1 blue triangle is placed on them.

From below the bird is inserted 2 paws, consisting of 3 orange triangles. At the back are attached 2 blue parts - a tail. The wings are assembled from 3 modules and attached to the sides of the owl.

Crane

To make a white bird with black plumage and a black neck, you need 118 white, 84 black and 9 red modules. The parts are glued together for strength.

Procedure:

Assembly begins from the base of the neck. 2 white parts are inserted sequentially, with corners into the pockets. Row 2 consists of 2 modules, row 3 – 1 triangle.
Wings are formed to the left and right of the base, 3 rows of 10 modules each. The body is filled, alternating 1 and 2 parts. The tail rows consist of 4, 3, 2 and 1 triangles. To obtain plumage, 2 rows are laid along the wings, and 8 black elements along the tail. The edges of the wings are decorated with three rows of 3 black parts.
The tail is folded from black triangles according to the scheme 3, 2, 4 and connected to the body of the bird.
The neck consists of 11 black parts, inserted one into another. At the end there is a white module turned in the other direction - this is the head. Add a red triangle - beak. Attach the neck to the crane in the designated place.
The legs are assembled from 3 black, 5 white and 4 red modules. The lower red part is put on the other side for stability.

Eyes are glued or painted on the crane. Decorate the figure with a bow and a hat.

Rooster

The rooster craft is made from 11 yellow, 34 red, 185 orange, 66 green modules measuring 1/32 and 4 red modules measuring 1/64. To prevent the figure from falling apart, the joints of the blanks are glued.

Procedure:

Connect 3 rows of 11 orange parts, roll them into a ring and lay another 7 rows. To form the chest and neck, add a row of 6 triangles, then continue with the pattern 5-4-5-4-3-4-3-2-3-2-3-2-3-2-1-2-1. The neck is compressed and arched.
For the wings, green modules are assembled in rows of 3-4-3-2-1-2-1 pieces. The legs are made from 3 yellow pieces, dropping the corners into the pockets of the next triangle. Add 2 modules, which are inserted with both tops into 1 pocket of the last module. The legs are inserted from below the body.
The head is formed from 3 orange modules, connecting them in series, the comb is formed from 3 red ones. The comb is placed on the head and a yellow beak module is put on, which holds the parts together. A red triangle-beard is added to the bottom. Connect the head to the neck of the bird.

Make 5 colored tail feathers, 17 modules each. The wings are glued to the base of the rooster, and the tail is inserted.

Chick

To make a chick, 207 yellow and 6 red modules are prepared. For the beak you need 1 red triangle, half the size of the main parts.

Procedure:

Assemble a ring of 2 rows of 16 modules each, add 5 more such rows.
Row 8 consists of 16 pieces, put on with the short side forward to separate the body from the head. Lay 4 more rows of 16 pieces, long sides forward.
The last row consists of 10 modules, put on 2 or 3 corners of the parts of the bottom row. The top of the head is compressed to give it roundness.
The wings are assembled from two modules and glued to the sides of the chicken, a tail from 1 triangle is added.
The paws are made from 3 red modules, the tops of one are inserted into the pockets of the other 2 and attached to the bottom of the body.

Glue the chick's eyes and insert the beak. Cut the paper into fringe and form a chicken hairstyle.

Snake

A snake from modules is made curved or straight. The head and tail are assembled in the same way, but the production of the body differs in the technique and number of parts. For a straight snake you will need 237 triangles, for a curved one you will need 251 modules.

Procedure:

Start assembly from the tail. 2 modules are inserted into the pockets of the first triangle with both tops and 8 rows are continued, alternating 1 and 2 elements. The lateral corners of the tail are hidden.
Row 9 consists of 3, row 10 - of 2, and row 11 - of 3 modules. The straight snake continues to be assembled, alternating 2 and 3 elements in rows.
The bend of the snake is achieved by shifting the rows of modules. In the 12th row, 3 triangles are shifted to the right so that the extreme corner of the module remains free. The 13th row consists of 3 parts, put on without displacement. The next 3 rows are laid with a shift, 3 modules in a chain. In the 18th row, 3 parts are placed straight, the 19th row is assembled with a shift. In row 20 there are 4 modules. The result was one twist of the body.
Similarly, move rows from 21 to 25 to the left, collecting 3-4-3-4-4 parts in them. Then offset rows of 4 modules are assembled. Turns to the right or left are made from rows 35 to 38, from rows 47 to 50. The last turn from rows 57 to 58 goes to the head. In row 57 there are 3 modules, in row 58 there are 4 triangles.
Snake heads are collected in the same way. Lay 2 chains of 4 modules each, then according to the pattern 3, 4, 3, 2, 1. This is the lower part, a forked paper tongue is attached to it.
For the upper jaw, 5 modules are placed on the lower part with pockets at the top, leaving the extreme corners of the side triangles free. The jaw is assembled according to the 5-4-5-4-5-4-3-2 pattern.

The head is connected to the body. Small black eye modules are inserted.

Stork

To make a stork sitting in a nest, you need 40 black, 222 white and 104 brown modules. The beak for the bird is cut out of red paper.

Procedure:

Assemble a chain of 3 rows, 9 modules each, and close it in a circle. Turn it inside out and add 3 more rows.
Row 7 consists of 11 elements, 4 of which are put on 1 corner, and 7 - on 2 corners of the bottom row.
Rows 8 and 9 are assembled from 11 triangles; row 10 contains 12 modules.
On the body, choose a place for the chest and put on 4 parts. Lay 3 rows on top according to the pattern 3, 2, 1. Fold the corner of the chest up.
For the wing, 16 modules are connected, the corner of one is inserted into the pocket of the other. Row 2 consists of 15, row 3 – of 14 modules.
The 4th row of the wing is assembled from 12 black triangles. Row 5 – 6 black, arranged in three pairs at equal distances.
4 black modules are inserted into the base of the body - this is the tail.
The neck is assembled from 23 white modules and curved. Glue on the beak and eyes.
They make a nest - a brown circle of 3 rows, 26 modules in each.

The wings are glued to the sides of the body, the neck is connected to the chest. The stork is placed on the nest.

Dog

A two-color dog can be assembled from 37 white and 98 yellow modules. It is better to buy plastic eyes and nose. The modules are connected with the long side up.

Procedure:

For the base, assemble a ring of 2 rows, 8 yellow modules in each. In the 3rd row there are 7 yellow triangles and 1 white for the beginning of the chest.
Row 4 – 6 yellow and 2 white.
In row 5, 2 modules are added on the chest, making a total of 4 white and 5 yellow. This is how 2 more rows are collected.
In the 8th row, 9 modules are put on with the short side out. The next 4 rows of the head are assembled from 9 triangles with the long side up, forming the dog's white muzzle.
In the 13th row there are 4 yellow modules. They are placed above the puppy's muzzle with the short side forward - this is the dog's forehead.
The ear is assembled from 2 modules, the top of one part is inserted into the pocket of the other so that a curved piece is obtained.
The tail consists of 3 yellow and 1 white modules connected in series. The upper paws are assembled from 2 yellow and 1 white triangles.

Paws, ears and tail are inserted between the modules of the dog’s body. Eyes, a nose and a pink paper tongue are glued onto the face.

Peacock

Modular origami for beginners with the help of master classes allows you to learn how to make complex figures. Peacock is one of these crafts.

To create the royal bird, the following modules are prepared: 252 green, 128 purple, 217 blue, 45 white, 1 blue, 15 orange. The model's tail is wide open and consists of individual bright feathers.

Procedure:

To assemble the feather, 3 purple modules are connected in series. Then put on 2 blue ones and add 2 more blue triangles to their extreme tops. An orange module folded into a peephole is glued between them.
An arch is assembled from 9 green modules, where 2 chains of 4 triangles are connected at the top by a module. The sides of the pen are jagged.
The arch is connected to the feather blank, attaching it to the two inner corners of the blue modules. The result is a feather on a short stem; 7 of them are made.
A long feather is made in the same way, only the leg and arch consist of 11 modules. You need 8 of these blanks.
For the body, collect 3 rows of 15 white triangles and connect them into a ring, turning them inside out. Add 8 rows, 15 blue triangles each.
Determine the place for the paws and insert 2 green parts. The third blue row is counted down the back and 10 green modules are fixed in it - this is the place of the tail.

A corner blank is made from 3 green triangles by inserting the vertices of one into the pockets of 2 triangles. 9 such parts are assembled and placed on 10 tail base modules. A row of 17 purple modules is laid on top with the short side facing the body.
11 green modules are attached below this fan, and 10 corner green blanks are put on them, as in the previous stage. A row of 19 green triangles is collected on top. There are 2 fans at the bottom of the back.
Determine the place for the neck and put on 3 blue modules in the first row and 4 in the second. The next rows follow the pattern 3-4-3-2-3-2-3-2-1.
A neck is assembled from 7 blue triangles, lowering the corners of the next element into the pockets of the previous one. Add a head - a blue module and connect the neck to the body.
Short feathers are attached to the first part of the tail, along the purple row. Long feathers are placed on the back fan. 2 purple modules are inserted into the head - this is the crest.

Cut out and glue the peacock's eyes. A paper crown is placed on the crest.

Cat

To make a sitting cat, you need 386 modules of any color. All parts of the figure are assembled separately and connected at the end of the work.

Procedure:

For the base of the body, assemble a three-row chain of 19 modules in a row and connect it into a circle, turning it inside out.
Add 2 similar rows, inserting the elements with the long side out. Rows 6 to 10 consist of 16 triangles, rows 11 to 13 contain 13 modules.
The base of the head consists of 3 rows of 16 triangles connected into a ring. The workpiece is turned inside out and 3 more rows of 16 modules each are laid, then 3 rows of 13 elements each. Glue the head to the body.
Assembly of the paw starts from the bottom with 3 parts and continues according to the scheme 2, 1, 2, 1, 2,1. They make 2 legs and glue them to the front of the body.
The ears are assembled from 3, 2, 1 triangles. The free side corners are glued to create a sharp shape.
The tail consists of 13 modules.

The ears are glued onto the head, the tail is glued with the flat side so that it peeks out from behind the cat’s body. The face is decorated with eyes, mustache and nose. A pink tongue is inserted.

The Dragon

Modular origami offers dozens of options for creating dragons. Beginning craftsmen will be interested in the technique of making this fairy tale character. The Chinese dragon will be made from 473 red, 110 yellow and 18 black modules. There will be a yellow stripe running down its belly.

Procedure:

Assembly of the body begins with 3 red modules, located with the long side up. In the 2nd row, in the center, put on 2 yellow triangles with the short side up, and on the edges - 2 red modules, each on one top.
In the 3rd row - 3 red triangles, 4 are collected similarly to the 2nd row, then there is a strip of 3 pieces. This is how rows from 6 to 110 are alternated, resulting in 55 three-module and four-module rows. The dragon's body is bent.
The paw consists of the foot and the upper part. The top is formed according to the scheme 2, 3, 2, 1.
In the first 6 rows of feet in chains, 2 and 3 parts are changed. In row 7 there are 3 modules, in row 8 they are put on a black triangle. Assemble 4 upper and 4 lower parts.
1 row of the head consists of 4 pieces, 5 triangles are put on them. Then alternate rows according to the pattern 4, 3, 4,5,4. Row 8 consists of 3 modules located in the middle with the short side forward, and 2 black ones, which are placed at the edges at one corner, with the long side up.
In the 9th row in the middle there are 4 parts, short side first, and 2 black at the edges. The 3 central modules of row 10 are inserted with the long side up. On the 1st and 3rd elements of the 10th row, horns are formed, consisting of 1, 1 and 2 triangles. They are completed by 4 modules, assembled one into one.
The lower part of the head is assembled according to the 2-3-4-3-2-3 pattern. Roll up 4 small white modules - teeth.
The beginning of the tail consists of 6 sequentially nested triangles; from the 7th row it is expanded, alternating 1 and 2 modules. From rows 15 to 22, the tail is assembled in two-module and three-module chains. Its end is decorated with black elements, gluing them in the shape of a Christmas tree. Attach the tail to the body.
The parts of the head are connected, the teeth are inserted into the jaws from above and below, and the eyes are glued. Assemble 4 legs.

The head and paws are glued to the body. There are 10 black modules on the back; these are dragon spikes.

Rainbow Vase

The colorful stripes of the rainbow vase are arranged vertically and taper at the top. The effect of color transition from one to another is created by shifting the modules. For the craft, prepare 320 triangles of red, orange, yellow, green, blue, purple.

Procedure:

In row 1 there are 12 modules - 2 red, 2 orange, 3 yellow and then, like a rainbow. In the 2nd row, the triangles are shifted to the right, capturing the lower tops of a different color. They make only 3 rows, resulting in a blank of 6 colors. 6 such structures are collected and closed into a ring - this is the base of the vase.
Lay out 11 rows according to the pattern, shifting each pair of modules 1 corner to the right. The craft takes the shape of a round vessel, its walls are carefully adjusted.
The neck of the vase is formed from the 12th row, in which half as many triangles are laid. Between parts of the same color, insert 1 module of the same color and make 1 more row.
In the following rows, the number of modules does not change, but in each chain they are shifted 1 corner to the left. So the vase is assembled to the end.

In addition to a pleasant pastime, modular origami classes bring real benefit. A novice master can decorate a room for a holiday and diversify the table setting. And his relatives and friends will not be left without original gift.

Article format: Natalie Podolskaya

Video about modular origami

Modular origami for beginners - how to make a 1/32 module:

Paper origami is the most famous technique for making figures from paper sheets with your own hands. Intricate folding of paper using special patterns allows you to obtain figures with silhouettes and shapes similar to birds and animals, plants, and objects.

Having originated in ancient China, developed in Japan, and walked through medieval Europe, origami has by no means lost its popularity. Many modern people show interest in this ancient art. By the way, in Japan origami was available only to high society.

How to make origami

Looking at the photo finished crafts, it’s hard to understand how to make origami out of paper with your own hands, how the figure is folded and why it holds its shape without glue. But thanks to our master classes, the art of paper origami is also suitable for children.

To make origami with your own hands, you need to understand the alphabet of special symbols (drawings with explanations of actions), and be able to read diagrams. It is worth noting that most special signs are intuitively clear from pictures and do not require memorization.

Cranes, frogs, tulips, kittens, dragons, spiders, boxes, hearts, etc. - it’s difficult to list everything that you can fold from paper with your own hands. For beginners making origami using classical technology, you only need a sheet of plain paper.

Plain white paper is wonderfully suitable for origami, only you will need to cut out squares from it yourself - the basis for folding. If desired, you can purchase special paper for origami; it consists of thin square sheets painted on both sides. different sizes. For very small details, you can use square colored paper stickers.

Master classes on origami

The art of paper origami has many directions, from light classics to modular designs. Origami workshops present schematic images of the actions of folding paper sheets. For beginner paper crafters, you need step by step photos or drawings of the folding process. For experienced origamists, a pattern is enough.

A pattern is a sheet from which the future figure will be made, with drawn lines that need to be transformed into folds. Patterns are convenient for complex origami models, when conventional diagrams and descriptions will be too voluminous.

We are pleased to show you the way to the fascinating world of Japanese philosophy by offering interesting master classes according to the ancient paper art origami.