Bows of satin ribbons - decorations that do not lose popularity over time. You can easily make them with your own hands if you use step-by-step instructions. Hand Made Accessory will be the original, unique, unique gift that will appreciate not only small fashionista, but also your girlfriends.

Flower Kanzashi

Kanzashi. - traditional decoration For hair of girls in Japan. Incredibly beautiful, lush flowers attracted the attention of masters around the world. Now, they decorate not only hairstyles, but also.

Before starting work, you need to prepare materials:

• 6 segments of satin blue tape 14x5 cm (length and width);
• the same number of tapes 10x2.5 cm;
• almost 6 narrow silver strips with a length of 15 cm and 8 cm;
• circle of felt with a diameter of 5 cm;
• stone or bead for decorating a core of a flower;
• needle and thread;
• scissors;
• matches or lighter;
• glue pistol;
• rubber or hairpin.

To create a bowl of satin ribbons in the style of Kanzashi with their own hands, follow the step-by-step instructions:

• Out of the edge of the sliced \u200b\u200bbands with fire so that they do not appear.

• Take the tapes 14x5 cm, fold in half. Make a neat nodule on the blue thread, collect 6 of the resulting petals on it. Chatting in a circle, forming a flower, and tightly tie a thread.

• Repeat the manipulation with 10x2.5 cm ribbons.

• Take the workpiece of a larger diameter. On the inside, in the center, glue the core from the felt. It will add a product of rigidity and facilitates work.

• From silver strips of 15 cm long and 8 cm form the droplets. Secure the edges with a gun.

• Symmetrically distribute the drops bigger size On the surface of the flower. Enclose so that the narrow ends come together in the center.

• From above, using a gun, fasten the workpiece of smaller diameter. Between the petals, place silver droplets, lock.

• Decorate the core of the bow with the chosen decor element.
• Turn over the flower, squeeze a little glue onto the felt base, secure the hairpin or gum.

• The creation of a bow requires painstaking and unhurried work, but the result exceeds all expectations. Such a flower will become a bright emphasis in, emphasizes the grace and the magnificent taste of its owner. If your ribbons are too soft and the flower does not hold the form just to treat the petals of the hair varnish.

Volumetric chrysanthemum

To create a flower, you will need the following materials:

30 narrow satin ribbons, 12 cm long;

• circle of felt with a diameter of 5 cm;
• bead or stone to decorate the core;
• rubber;
• tweezers;
• scissors;
• matches or lighter;
• adhesive pistol.

To make your own hands beautiful bowiR from satin ribbons in the form of chrysanthemum, stick to step by step instructions:

• Take one strip, fold in half the front side inside.

• Cut the edge at an angle of 45 ° along the fold line, fall out the lighter.

• Expand the tape, connect the ends from the opposite side a little brass. Spread the edge with fire. Carefully check the resulting petal for strength.

• Repeat the manipulation with the remaining 29 stripes.

• Take the basis of felt. With the help of a gun, fasten the petals along the outer edge of the tissue circle.

• Closer to the center, glue the second level of the leaves, in a checked order relative to the previous layer.

• Repeat the action by fixing 3 row on fetra.

• Place the glue prepared for the core decor element.

• Turn the finished, with the help of a gun, fasten the gum on the fetter.

Chrysantoma is not necessarily doing a monophonic. You can "play" with shades of ribbons, their combinations.

Do you know how to make crafts with your own hands?
Vote

Universal Bow

The following, pretty, looks spectacular, and it is possible to use it not only as an element hairstyle. The bow is suitable for decorating a gift or an envelope, in which the baby will leave the maternity hospital.

To begin with, prepare the necessary materials:

• 11 segments of the base of the primary color, the size of 8x2.5 cm;
• 6 Atlas strips of a contrasting shade of 8x2.5 cm;
• stones or beads for decorating;
• scissors;
• tweezers;
• glue pistol;
• outdoling tools: matches, lighter, vulnerable wood.

Now you can start making a bow from satin ribbons with your own hands. To do this, use step-by-step instructions:

• Take the prepared lane of the main color, bend the defects and in half. Roll once again and, holding a tweeze, take the edge of the lighter. You have to get a petal.

• Repeat manipulation with the rest of the strips, including a contrasting color.

• Cut out the main tint of the circle. It will become the base for the future decoration.
• At the outer edge of the base with a gun, attach 8 main tone petals.

• From above, a little closer to the center, in a checkerboard, glue 6 petals of another color.

• At the last level, fix the remaining leaves.

• Core decorate, stone, bead or any other decor element.

• Accessory for hair is ready. It is necessary only from the inside of the flower to glue the gum. If you are preparing a bow for registration or envelope for an extract from the maternity hospital, follow further recommendations.

• Make 4 petals of two different colorsas indicated in paragraph 1.
• From the tape of the main shade, collect a loop, fall out the edges, stick to the inner side of the bow.

• Take a ribbon with a length of 1.5-1.8 m, stretched into the loop.
• Return from each edge of 5-8 cm, fasten two petals with a gun. Between them should be a gap of several millimeters.
• Top of glue the remaining sheets of contrasting color.
• Center decorate a bead.

Creation of bows own handsBe sure to experiment. Hand Made is not only a unique, unique product, but also flight of fantasy, your aesthetic vision of the world, a way of self-expression.

And do not be discouraged if something goes not according to plan. Enjoy the process, feel the fabric in your hands, put a piece of soul in the decoration, and the experience will come with time.

Biggled, calorite, huge and small bows - at all times were fashionable decoration and the emblem of femininity. Our grandmothers, brazed braids, used the tape, and her tip was associated with a cute bow.

Such a device will emphasize a wonderful outfit, also resurrects a harsh and sour image - quite only to stick it and - voila - the idle is instantly transformed.

Now, with the past years, a huge number of hairpins and rubber bands appeared on the market. The abundance of shape, colors, size - the choice is big and no matter what a sneaker will be able to choose the winery.

Decorate curls with a cute bow, so that the hairstyle began to play.

The cost of these products is sufficiently available. But what if the hunt is to have a special hairpin, which will be made specifically for your outfit and hairstyle, with all this it will be the only one in your own way?

Bows for at least a taste

Caloritis Hair Jewelery Options for Maja Mans

Specifically, in such cases, we remember that everything can be done in home criteria, especially as the bows of ribbons on their own hands are created, it is not difficult to do it, as it seems on the 1st gaze (read also the article "Hairpin Crab: One for all occasions ").

Naturally, this is a matter of not a few minutes, you will be careful for patience and preferably, but time spent and your work, believe me, you will be raised - exalted eyes and compliments will be provided with you.

About how to make bows of hair ribbons, we will tell on.

Create various forms of bows

Stylish image for Majahan and Adults

Before starting work, determine what form and size you would like to make a product. Do not be afraid to show fantasy and experimenting with the size, material and coloring, combine different quality and colors - so the device will be easily unusual and unusual.

Send attention! Up to work, pay outwards the choice of tape material. Try to take the one that is quite compacted - then the bow will keep the specified form. Such materials such as satin, silk, satin, flax, cotton, velvet, etc.

Color selection, width, shapes - always for you

Bows for hair ribbons are made with their own hands various methods And there are different speciesThe following are more common options:

• Product from Atlas. To do conventional bow For hair from the ribbon, you will be useful to the ribbon of approximately 20 cm, it will need to be folded in pressure. You will get a loop that needs to be lowered down. So you will have two small loops that need to be crossed among themselves by turning one into the circle and stretching slowly.

Bantian Creation Option

• Flower Bow. To create an unusual and excellent device, it is better to choose a medium width ribbon. You need to twist the tape with such a macar, so that the formed 1st booty is crossed by the tip.

Such acts need to be carried out until the time of the flower does not suit you - adjust it to your taste. The fixing is carried out by the last twist and binding by the node in the center.

• Product with decor. To create a subsequent device, get a wide dense tape, the edges of which you need to sew among themselves, so that the circle came out. Sew two such rings.

Fold the rings on each other and press it, so that the place of the junction was formed on the seams. Cut a small piece of tape and tie them rings.

The size of the bow allows it to arrange it with an additional decor - so you can stick sequins, rhinestones, and beads. The middle can be decorated with a bead, buttice or a huge stone.

Fork - Successful tool for making Majahan Banta

• Small bow. Do not understand how to make a bow tape bow little size? Then fork to help you.

Take a thin tape, wrap it with a plug, so that one edge of 5 cm remained free. Long tip Wrap around the plug and pull it out from the bottom of a short edge. Further, it needs to be held in the center of the tongs of the fork on top of the tape and pull down.

Close ribbon lift and grind into the formed loop. Now tie a nodule. Adjust the length of the tails.

A bow can be pasted on the invisible either a stud, it will look in the coupe with at least some hairstyle just charming.

Tip! So that the bow was not blocked, and the threads did not interfere, carefully spend his edges over the fire, the most convenient to do it above the candle, but see, so as not to be wrapped with wax ribbon. Act rapidly so as not to burn the material, and the edges remained with all this flattened.

Methods of performing a huge amount, add your imagination here, and in the end there will be a unique hairpin

Sew South American Bow

How to make hair bows from ribbons with multi-layer loops? Such a question appears in many women who are already tired of standard bows. The multi-layer bow is called South American, and for its creation you need to prepare all the materials.

You will use the reps' ribbons - for the base, take three ribbons whose width will be different. The rear background will decorate tapes 3-4 species whose width can be 1-2.5 cm.

In general, choose the size and sketch to your own taste, but so that everything looked harmoniously. Also prepare cardboard, scissors, glue, lighter, needle and thread.

Make such a product will not be enormous difficulties, and step-by-step abstract with a photo, you will help to make an impeccable South American Bow:

To make curls, take the cardboard with a size of 15 × 7.5 cm.

With the help of scissors in the center cut the line, a width of approximately half a million and about 4 cm long.

Prepare three cardboard templatesBut the length of the carved strip on each should decrease by 2.5 cm, the width remains constant.

Take a tape at 2.5 cm and attach it to the edge of the cardboard near the cutout.

Ribbon crush the cardboard, and in the midst of the carved strip push it with a needle. Further remove the tape, with all this, not a touch needle.

Hold the ribbon so that its tail is from above, carefully disconnect the coils to the sides, but that the center remains a fixed pin.

Secure the middle with a needle with a thread by making several stitches.

Do the same acts with other ribbons, and templates.

A pair of ribbons of similar color and sizes to cross, and the center pens out the needle.

Do the same acts and with the following segments, but with all this layers, overlay one to another. Make a beautiful X-shaped form. When everything is made, according to your view, absolutely fix the middle of the stitches and wrap it with a couple of times.

Connect all the result in the final part. Make it can be tolding their thread a couple of times.

On the root side, secure the lock on the hair, for this you can choose an elastic band, invisible, crocodile, or a messenger clamp.

Summary

Summing up, we wish to note that the hair bows with their own hands from the ribbons is not only saving money, and the manifestation of your feature, because such a decoration will only have. We want you creative flights and fantasies (see Also, the article "Hair Gum Kanzashi and other scenery").

Well, video in this article will enjoy the whole process of creating an extraordinary decoration.

Hairstyle is an integral part of a little girl. From the small years and to the school graduation in the box of each girl are stored many hair bows. The material and decor of this accessory can be found absolutely different. Bow satin ribbon It gives an image of elegance, refinement and accuracy.

Many mothers, and, mature, and girls try to make a decoration from a bow with their own hands. This is an interesting and always win-win solution.

To do something for the girl, you can contact the most simple options. On the gum is beautifully tied the satin ribbon - the hairpin is ready. Simply? No, a beautiful bow tie is not easy. Moreover, it must be fixed. We will show on the example of several master classes on tie a bow, with which even a schoolgirl can cope with.

Technique Kanzashi

With a more complex option, students of the Central and Elder School can cope with the help of parents. The occupation is interesting, but requires patience and perfection. Made bows can be worn daily or on solemn events. We offer step-by-step instructions for sewing bows of satin ribbons. We decorate it with a flower in Kanzashi technique.

Materials and tools for the manufacture of one bow:

• one-photon satin ribbon (we take white) 2.5 cm wide and 70 cm long;
• ribbon with ornament or other color (we have black in peas) 1 cm wide and 40 cm long;
• satin ribbon 1 cm wide and 9 cm long (we have white) for the manufacture of a flower;
• rubber;
• semobusinka;
• thread;
• needle;
• candle or lighter;
• line;
• scissors;
• tweezers;
• thermopystole.

Start step by step instructions. Prepare tapes. It is necessary to cut them on such dimensions:

• satin white ribbon 2.5 cm wide - 2 cuts of 20 cm long and 6 segments of 5 cm long,
• satin tape 1 cm wide - 2 segments of 20 cm long.

Billets are ready. We will proceed to the formation of parts. On a 20 centimeter white cutting ribbon overlapping a black ribbon. It should be located in the middle, as shown in the photo. Squeeze the edge of the tweezers and process with a candle or lighter.

We make the second detail similar to the method.

The edges of the tape slightly impose one on the other. We flash the markup seam.

Do not cut the thread, we ascend the 2nd item, the thread remains, it will still be needed.

Went the ribbon in half. Note the middle as shown in the photo.

Connect the fold line with the seam line. We flash the corresponding stitch, but already in the opposite direction.

Now the thread needs to be shy and wrap around the seam line several times. Secure with multiple stitches. Cut the thread. The billet is ready.

We begin to fulfill the bow. We will need harvested wide segments of white satin ribbon in the amount of 6 pieces. We fold them with a direct angle, the ends should be the same length.

We fold the workpiece, connecting the aa and explosive points. Sink the blank petal in the corners. This can not be done, but it's easier to work with the pavement.

Let the petal twice. The satin side should be inside.

Turn the long side of the petal. Edges Separate with fire. Petal ready.

In the same way, we make 5 more petals.

With the help of a thermopystole, glue the flower petals with each other. Flower harvest is ready.

We start assembling. From the Pouring side of the bow, we glue a gum using a thermal system.

The remaining white segment of a thin white ribbon is attached to a thermoclayer on a base of a bow. Making a double round. So the rubber band will not separate from the bow during operation.

On the middle of a bowl with the front side glue the flower. Engine it with a semi-graysin or bead. Bow ready!

Bow on a fork

An interesting and popular method to tie a bow is the method of forming a bow on a fork. Bows are small, but very neat and cute. They can be used to make the hairpins on the rubber band, grinding, clips and "clappers". In addition, this bow can become good decoration For a postcard or for a gift, decorate, for example, a kitchen towel, or give a highlight to the casual dress of a girl or a woman. It is done very simple. Below are a detailed step-by-step mini-master class.

Now you need to carefully remove the bow from the fork, but before that fix the additional node for strength. Remove, spread a bow. If the ends are long, cut them and process. The form can be given in different ways - someone like it. A bow ready.

For the manufacture of larger bows in this way you can use cardboard stencil. Stencil template provide below.

Do not be afraid of experiments, try, everything will work out!

Video on the topic

To create a bowl with a flower, you will need:
- Elastic for medium-sized hair.
- Ribbon from the satin of lilac and pink shades, width of at least 50 mm.
- ready-made stamens of green and pink colors.
- Cabochon with a diameter of 12 mm.
- rhinestones silver diameter of 3 mm.
- Scissors.
- Satin tape of green and lilac tones, 25 mm wide.
- lighter.
- Thread with a needle for manual works.
- line.
- Thermopystoletole.
Creating a bow.
The decoration consists of a bow and flower. Each of them must be created separately. Start better from the manufacture of a flower. First you need to prepare the same details from the wide ribbons of lilac and pink shades, with parties 50x50 mm. Total such billets need 6 lilac and 4 pink colors.

Of these you need to make smooth petals. Taking one billet in the hands, it must be rotated the face up.

Then bend it diagonally, at the same time separated by half.

Now the two sides of the sections should be folded with folds and hold fingers in such a position.

The edges turned out a bit uneven, so you need to cut them with scissors.

Now this edge should be melted hard to fix the folds.

It turns out an oval petal.

Further from the remaining blanks you need to make the same details.

Now they need to be connected, pink petals of pairs, and lilac three pieces.

From the obtained billets, two flower should be collected, connecting the lilac and pink petals together. As a result, one flower should turn out with 5 petals.

Next will be required for them. To do this, it is necessary to prepare a length of 6 cm long segment from a green tape. Total will need 20 pieces.

All leaves need to be created separately. Taking into the hands of the first segment, it should be deployed to the front side.

Then fold it in half, closing the front side inside. The bend strip must be left closer to himself.

Now from the edge of the bend and towards the upper corner, the part must be cut on the diagonal, separating it in half.

Continuing to hold the part to the fingers, according to a new slice, it must be carefully treated with fire, at the same time soldering two layers of green tape. The resulting workpiece must be turned out.

It turns out a pointed leaflet. From the other segments it is necessary to make the same leaves. The finished leaves can be pushed aside and continue working with flowers. Further, the stamens of pink and green shades will be required. They should be combined with glue into small bouquets consisting of 4 green and 3 pink stamens. Such bouquets will need 4 pieces.

They should be attached 2 pieces to flowers, having from the bottom.

Now the leaves can be attached to the flowers. They must be glued into two rows. The first level consists of 5 leaves. They should be attached between petals.

In the second row, the leaves must be fixed right under the petals, but slightly putting forward forward.

As a result, the flower is surrounded by leaves. Using the remaining leaves, repeating the entire sequence, decorate the second flower.

Now you need to make a bow. This will require a narrow tape. They should prepare the segments of 20 cm long.

For two bows they will need 6 pieces. First, the sections for all long segments need to be soldered.

Then their edges need to be combined, a little overlapping one on another, getting a circle in the end.

Now with a needle with a thread, a folded ribbon must be flashing in the middle.

Lush fatin bows and miniature satin bows are found in our life everywhere: they decorate the hairstyle, boxes with gifts, holiday tables, children's things, belt, hair accessories. Scope of application decorative elements Expands every year, and at the same time growing of adults and defers to the peculiarities of their manufacture. Learning to make an elegant bow from the ribbon with your own hands is not at all difficult, even in the absence of experience. Methods for tying a nice accessory are very much, the choice of suitable depends on the size of the product and its future purpose, the characteristics of the material from which the bow is planned, the presence of additional tools at hand.

For the manufacture of bows you will need sewing needle, sharp scissors, centimeter tape to measure the tissue strips of the desired length. You can sew manually or on a typewriter. For work, ribbons made from various materials are suitable. The most sought-after:

1. Atlas looks spectacular, easily sewn.
2. Capron - durable and hard.
3. Fatin and organza - air translucent fabrics. An essential drawback - the ends are often creepy, so they need to be melted with a lighter.
4. Reps - a malleable material with a long service life.

No less popular lace bow from the tape. This material is well held by the form, the finished accessory looks sophisticated and expensive. At the same time, the lace is rapidly wear out, and it is difficult to care for him. Cotton products are durable, do not appeal at the edges. Of course, they quickly pollute, but the wash of this material does not cause difficulties. The simplest technique of sewing an accessory from multicolored ribbons is considered the Japanese canzashi method, which allows you to get beautiful multi-layer flowers of the most bizarre form.

The optimal option for novice craftsmen is a reps bantum from a wide ribbon, because with this cloth it is easiest to work.

Required tools
Atlas
Capron.
Fatin
Reps
Lace
Cotton

How to make from satin or kapron tape

Most often, satin or piping tapes are used for the manufacture of bows. There are many ways to make a beautiful accessory. The most popular methods are classic and two-layer of fine tissue strips.

Classical

This is the easiest way, its advantage is that there are no tools for work. Requires exceptionally hand dexterity.

The finished product can decorate hairpin. Another application option is the decoration hairstyles. Fastening the chain, you can wear a bow on the neck instead of the coulon.

On fork

In this way, it will be easy to make a pretty little bow. It will take a metal or plastic fork to work. Suitable even cutlery from toy dishes.

Such an accessory can be decorated with a handbag, a wallet or keychain for keys. It is suitable for decorating children's toys. Bows are very beautiful: they are perfectly smooth, symmetrical.

Two-layer thin ribbon

This is a rather laborious way. For work, the fork and scissors will be required. In order for the tape, the ends do not showered, they will need to be laid.

You can decorate the finished product, it will suit it and to decorate the hairpins. A large two-color bow from the tape will also look good as a bookmark for books.

Clean

Ready accessory handmade Reminds a bulk rose. "Flower" is made from the tissue of two colors. As auxiliary tools you need a fork, thread with a needle.

This bow is perfect for decorating a rim or hairpin. Hinting a "stem" from the wire, you can get artificial flower - Excellent option for decorating a wedding or festive costume.

Dior

You can roll such a bow, without using the auxiliary instruments. To fix the resulting design, we need glue for textiles. After working, its surplus is carefully cleaned with a napkin.

The finished product can be used for a gift or as a costume decor. If you attach a metal ring, an elegant accessory will easily turn into an original key chain.

On the rim from a wide material

To work, need a needle with threads and scissors. The finished product is fixed on a plastic or metal hoop with an adhesive gun.

Instead of the rim you can sew a homemade on a hairpin or hair band. The most convenient to use the crocodile clamp. Better, if it is neutral without decor.

Minnie Mouse style

The child will be delighted with such a gift. For work, the sharpened scissors, a needle and threads are needed. Sew the accessory on the machine will be faster than manually.

Usually, such an accessory from ribbons is used to decorate the rim with the ears of the famous Disney mouse (they can be cut from black felt). Also a child can wear a bow on soft toy Minnie Mouse.

On the neck

You can make a magnificent bow, which will become a real decoration of a children's costume. Additional tools for work is not required. It may take a lighter to fall the ends of the tape.

Accessory can be safely used instead of a butterfly tie. It is well suited both boys and girls. You can also decorate them a doll or a plush toy.

At the belt

Such a bow of satin ribbon can decorate a wedding or any other party dress. Auxiliary tools for work is not required.

The bow on the dress performs a decorative function, and also emphasizes the grace of a thin waist. Beautifully looks like an accessory, made of color contrasting cloth. Popular coloring options are black, blue, bright red, saturated dark green.

On the back of the chair

Such a bow will be the original interior decoration. It will look good on the back of a wooden chair with a soft upholstery. For work, needle and threads, as well as a ruler and scissors for cutting strips. On the furniture you can pre-wear a case.

Before tying a magnificent bow of the headband ribbons, it needs to be straightened.

You can decorate in this way, you can chairs in the kitchen in the living room, children's. Color must be harmonized with other elements of furniture. This type of decoration is well combined with the style of Provence (Rustic).

Manufacturing in Kanzashi

Kanzashi is a Japanese technique of making lush bows from ribbons. In the East, this method was known since the days of the Middle Ages and practically did not change. Asian needlewomen decorated with elegant colors from ribbons and worships.

Now the art of Kanzashi is very popular in Russia and Western Europe. Bows of satin fabrics made in this technique can be used to decorate the hairpins, packaging gifts, children's and women's dresses. The flower of the ribbons will look good on the cover of the casket for needlework or other little things.

Flower hairpins

This is the easiest work in Kanzashi technique. The finished product is glued to the metal base for the hairpin. You can use an additional decor - gold or silver cord, rhinestones, sequins. Step-by-step action algorithm:

1. Cut on squares multicolored fabric strips.
2. To form from them multi-layer triangular petals.
3. To glue each workpiece, give her a rounded look.
4. Connect all the elements with each other in turn to get a flower.

Thereafter finished crawl decorated, focusing on your own taste. In the center for decoration, you can put a small feature of the bee or butterfly. The hanging segments of the color cord will give the product a playful note.

Another elegant option, how to make a bow of hair ribbons:

1. Form five petals from blue squares.
2. Collect each of them in a fold, "blind" flower.
3. Make two green leaves and glue the stamens to them.
4. Attach this decor to the flower from the wrong side.

For an extract from the hospital

A lush rose stitched in Kanzashi technique, you can decorate the overalls for the newborn. For boys traditionally choose all shades of blue, for girls - red, pink, orange. Create original decoration It is not difficult at all:

1. Cut the strip of narrow tape on 6 pieces of 14 cm long.
2. Out of the edges of the lighter, so as not to sleep.
3. Collapse each piece twice, combine them with each other alternately.
4. Attach another 6 billets by the second tier.
5. Make several petals of silver or golden cord and form the third row.

To create accessories that will decorate the clothes of the newborn, you need to choose hypoallergenic materials. It is not necessary to acquire a bright saturated color tape to create a bowl of a ribbon, it is likely that it was made using harmful dyes.

Cut strips from different tapes
Outfall edge
Fold every piece of tape halve and secure
Connect the petals with each other alternately
Attach the second row
Shape the right number of tiers
Add Decor
Bottom to glue a blank from felt and insert a ribbon
Ready product

Methods of beautiful binding of the reps tape

The main features of the reps tapes are increased strength and compliance, the ability to acquire any form as a result of mechanical impact. They can be found in stores for creativity. A multi-layered or double bow made of this material looks effectively for a long time, without losing external attractiveness over time.

Multi-layered

This craft can be decorated with a photo album or hairpin. The more colors are used, the hardest and more accurate to look like a accessory. Step-by-step instructions for manufacture:

1. Form from segments multicolored petals (22 pieces).
2. Attach them to a round-based felt.
3. On top of the first tier glue the second of 16 parts.
4. Make a third row of 10 elements.

If there are still several pieces of ribbons, they can be attached to a fetal basis. The cafeteria is glued to the rim, rubber band, hairpin or photo album with a special adhesive gun. You can immediately make several identical bows of different colors.

On rubber band

This accessory you can decorate children's hair, for example, secure your pigtails. It is better to choose for tape making bright flowers - Red, orange, yellow. When working should adhere to step-by-step instructions:

1. Take two repition strips of the same length, folded together crosswise crosswise - it turns out the basis for a bow.
2. Glue the decorative grid on top.
3. Forms from oval white blanks and fix it on the basis.
4. Place decorative stamens in the center.

You can additionally collect leaflets from green segments and decorate them bows from ribbons. After that, the resulting design is securely fixed on the rubber band. An elegant accessory is well suited to summer dress or sundress.

In the form of a butterfly

This product will become an excellent gift for a boy of 5-7 years. Coloring is better to choose a one-photon: dark blue, gray, brown. Stylishly looks like a ribbon accessory in a small cage. For work it is necessary:

1. Fold together two reps strips.
2. Escape or stuck one edge to get a loop.
3. To form a bowl bow with pointed ends.
4. Secure with clothespins, neatly cut.

The resulting design is superimposed on a wide ribbon that performs the function of the base. After that, both stripes are sewn. In the middle make a screed.

Create a decoration for a gift box

There are several ways to make bows for fastening on the boxes. The color must be chosen by the color of the packing of gifts or contrasting. You can make few small elements of the decor, placing them in different places, or one large.

Name	Bantian size and shape	Type of suitable ribbon	Manufacture
Lush	Medium, in the form of the letter x	From reps or atlas	Prepare three identical in length of segment. One folded fourly. With the second we do the same, crossing the ends. Make a tie in the middle
Terry	Round flower	Fatin, organza, lace	Fold the fabric strip, cut in the center two triangular shape holes. Attach a small piece of ribbon in the middle. Pull out all the tips so that the bow of the ribbon is fluffy
Double	Small, in the form of the letter x with freely hanging ends	Atlas, Capron, Cotton	Fold the tape several times. Attach another strip with crossed edges. Collect together both fragments with the help of the third

The colors of the bow should correspond to the style of the gift packaging. For men, strict options are suitable: black and white cage, chess pattern, longitudinal or transverse stripes. For women - romantic, feminine: pink (decorated with hearts or flowers), noble burgundy or scarlet. With the style of Provence well combined light, pastel shades. With the direction of High-tech - silver and all shades of gray, as well as any color with the effect of glitter.

If the bow is one color with a box, it can be visually lost on its background, so it is better to choose a contrasting color. Recommended combinations: red and blue, black and white, green and orange.

Double

Projecting options

Having understood how to make an accessory with your own hands and how to tie a lush bow from the Kapron tape, you can go to the decor. For decorations, it is permissible to use any blowing materials. Fasten them to the finished product best with a special adhesive gun. You can use the usual glue for textiles in the tube, but then you need to remove the excess with a soft napkin, otherwise the accessory will look untidy.

Beautiful bow from the tape will be able to apply as decor:

• lace and guipure of any shades;
• beads and glass;
• beads different sizes, artificial pearls will be especially impressive;
• semiprecious stones;
• rhinestones and sequins with gloss effect.

Cotton or repusive bow can be decorated with a small brooch. But for less dense tissues, capron, organza or fate, it is better to choose other options.

The easiest way to decorate the bow using ready-made stripes. They can be depicted stylized flowers, geometric figures, symbols and logos, cartoon characters. These elements are glued or sewn (manually, typewriter).

During operation, it should be remembered that the purged side of the tape made with its own hands should be hidden. Slices in cotton and reps strips are gently treated with a secret seam. Fatina, Organza, Capron and Atlas, the ends fall on the open fire so that the threads do not appear.

It is possible to determine the desired tape size for wrapping and creating a bow in a universal formula: measured the height and length of one side of the package, these indicators are folded, and the amount received is multiplied by six.

Free ends of the ribbon when tie a bow should not hang from the box cover. If the edges turned out too long, they are shortened. To do this, they are neatly cut by sharply sharpened scissors (both at the same time to save symmetry), and then fall with fire (lighter).

Before you make a bow from satin ribbons with your own hands, experts recommend a little practicing in the manufacture of paper crafts. This will help better understand the general principles of folding accessories from matter. You can use photos and step-by-step instructions with graphic illustrations.

If planned to be used ready product To decorate a suit, its painting should be harmonized with clothes, or at least not to be out of the general ensemble. These uncomplicated rules and recommendations will help not only understand how to make a bow, but also to find a worthy access to the accessory.
Loose edges of the tape should not hang from the box cover
At the beginning of work it is worth practicing on paper tapes

Video