To decorate the Christmas tree with "precious paper stones", you just need to print ready-made templates, cut them out and glue paper Christmas decorations.
Before you completely glue the craft, attach a loop from the inside, for which you will then hang the toy on the Christmas tree. Finished paper stones can be covered with sparkles for beauty.
Templates small size: pattern-1 pattern-2 pattern-3 pattern-4 pattern-5
On the same site, you can download a template for another, more difficult to make New Year's paper craft - a paper diamond. It can also be used as a Christmas toy or Christmas decoration. Download template >>>>
Print New Year's scheme diamond on dense colored paper, cut it out. Before gluing the craft, carefully, along the ruler, scratch the fold lines (marked with a dotted line) with a needle to make it easier to fold the paper. Note: if you suddenly printed the template from the link above, but the dotted line is not visible on it, you can use this template. Here everything is the same, only there is no dotted line.
And more Christmas paper crafts from www.minieco.co.uk:
paper Christmas decorations
2. New Year paper crafts. New Year paper toys
paper bells
3. New Year's decoration. New Year decoration
Probably already known to many, the Creative Park site from Canon will help you decorate Christmas tree handmade paper toys. Christmas decorations- bells, hearts, lollipops, Christmas tree decorations in the form of Christmas boxes - all this and much more you will find on the Creative Park website.
4. DIY Christmas decorations. How to make New Year's
We suggest you make simple Christmas tree decorations out of paper, decorated with photographs of family members. To do this, you need to download templates for Christmas tree decorations from the link, cut out individual squares, bend their corners and glue them together. New Year's toys made of paper blue color need to cut, round off the corners. See photo below.
In the photo below, a New Year's paper toy depicting Santa Claus is made in a similar way. You can download the template.
5. New Year's ideas. New Year's master class
Another interesting new year idea - Christmas decorations origami wreath. To make such a paper wreath, you will need to cut beautiful paper into strips 4 cm wide and 8 cm long. You need 8 strips in total. Each strip must first be folded in half lengthwise, and then in half across. Holding the blank with the open edge up, bend its top corners down as shown in the photo. Cm. New Year's master class at the link >>>> From the resulting blanks, assemble a New Year's wreath by inserting them one into the other.
6. Christmas toys made of paper. How to make a Christmas toy
Most people associate ice cream with hot weather and summer vacations, however, Christmas decorations in the form of waffle cups with delicious treats look very festive and original on the New Year tree. For the manufacture of these New Year's toys from paper, you will need Kraft packaging paper (for cups) and corrugated paper of different colors for the ice cream itself.
Cut out circles from craft paper, cut them in half. From each semicircle, fold a cone, glue it. corrugated paper crumple different colors into lumps, for one Christmas tree toy you will need two such lumps. Now you need to string "cups" and "ice cream" on a thread, making loops on top, for which you will then hang New Year's paper decorations on the Christmas tree. See the New Year's master class at the link >>>>
7. Christmas toys made of paper. New Year's schemes
In Denmark, there is a tradition of decorating the Christmas tree with heart-shaped wicker paper baskets. The photo below shows traditional wicker baskets made of paper. They can be hung on the Christmas tree empty or filled with small sweets, nuts, cookies.
To make this Christmas paper decoration with your own hands, you need to print the following template on two sheets of paper in different colors. Cut them out, fold in half, make three cuts. You should get these two blanks.
Now you need to weave them together to make a paper heart basket. For a detailed New Year's master class on how to weave a paper basket, see the link >>>>
Here are a few more New Year's paper baskets for the Christmas tree:
With snowflakes
Guys, we put our soul into the site. Thanks for that
for discovering this beauty. Thanks for the inspiration and goosebumps.
Join us at Facebook And In contact with
There is very little time left before the New Year, and it would be time to think about holiday decorations for the house. You can buy ready-made options in the store, but it is much better to make original things with your own hands.
We are in website we believe that children should definitely be involved in this business, and we have collected great ideas for New Year's crafts.
sock snowman
From unnecessary socks you get such funny snowmen. You will need socks, rice for stuffing, some scraps and buttons. Cut off the toe at the sock, and on the other hand, tie it with a thread. Pour in the rice, giving it a round shape, pull the thread again and pour in more rice, forming a smaller ball. Sew on the eyes and nose, make a scrap scarf, sew on the buttons. And from the cut off part you get a great hat.
Christmas tree pendants
A cinnamon stick is taken as the basis, several artificial spruce branches and multi-colored buttons are attached to it with glue. Such Christmas trees will not only decorate the house, but also fill it with the warming aroma of cinnamon.
Cork deer
Bottle caps are great craft material. For example, you can make such a cute deer. You will need some corks, glue and various beads to decorate. This is not ashamed to hang on the Christmas tree.
stick crafts
From ordinary ice cream sticks, cute Christmas trees, snowmen and snowflakes are obtained. You need paint, glitter, buttons and a little imagination. Even the smallest children can cope with such crafts.
Christmas trees made of colored paper
These wonderful Christmas trees can be made by making a cone of green paper or cardboard and decorating it with various little things. Buttons, pebbles, beads and various paper figures will do.
potato drawings
Snowflakes from pasta
Clip pasta different shapes with glue and cover with silver paint, fasten the tape - unusual christmas snowflake ready.
Snowmen from covers
Cover the metal bottle caps with white paint (it is better to take acrylic) and glue them together, as shown in the picture. Draw a face for the snowman and decorate with a scarf from a bright ribbon. If you glue a loop on top of it, then the snowman can be hung on a Christmas tree.
Crafts from cones
From the cones you can make different animals and any other characters. You will need paints, shreds, buttons and, of course, imagination and inspiration.
Christmas tree made of buttons
Pick up green buttons of different diameters and a few brown ones for the trunk and secure them with a thick thread. Decorate the crown with an asterisk.
painted balls
Place the pieces of wax crayons in a transparent christmas ball, heat it with a hair dryer, constantly twisting it. Melting, the pencils will leave beautiful colored stains inside the ball.
Step-by-step instructions for each craft are different, so it’s better to see than to read.
Paper crafts for the New Year 2019:
Volumetric paper figures
For children school age it will be interesting to make an original New Year's craft with your own hands. They will be especially pleased with the ideas of volumetric figures (see photo below) in the form of angels, Santa Claus, a snowman, a Snow Maiden, and animals.
As a base for making jewelry, it is recommended to use plastic bottle or cups.
Photo of volumetric paper figures, step by step:
DIY paper Christmas garlands
To do original decoration for a Christmas tree or apartment decor (walls, windows), use any paper and thread ( satin ribbon). It can also be used in combination with paper - cotton wool, large beads, felt.
Applications on cardboard
Applications made of colored paper pasted on cardboard can be used as New Year's cards and pictures on the wall. You can make animals with your own hands, fairytale heroes and inscriptions.
Multi-colored paper garland for children
very unusual and original garland on New Year 2019 can be made with your own hands from colored paper of the brightest shades. If using templates geometric shapes, you can create wonderful layouts, from which it is then easy and simple to assemble a garland.
This interesting New Year's craft will bring liveliness and color to both the nursery and the common room, because a funny garland will lift the mood of both kids and adults. Also, the garland can be hung on the Christmas tree as Christmas tree beads.
To make a paper garland you will need:
- colored paper or colored cardboard;
- pencil;
- ruler;
- scissors; glue.
Step 1. Download templates of geometric shapes and print them on colored paper or, armed with a ruler and with a simple pencil(preferably with an eraser), make a drawing of three-dimensional geometric shapes, again, on colored paper or colored cardboard.
Step 2 With the help of scissors, you need to cut out each future geometric figure along the contour.
Step 3 Now glue the figures, not forgetting to stretch the thread in time so that when assembled, the garland thread remains inside the figure. The garland is ready!
Don't miss interesting news in photos:
12 DIY bedside cabinet ideas
Japanese shoes wrapped around the feet
The most unusual benches in the world
10 real ways remake sneakers
That in the New Year and Christmas can be more magical than a Christmas tree. In the evening, when the lights are turned off, a fairy tale begins in the mysterious flickering of lanterns in the branches. Everyone comes up with their own magical story.
In some, the nutcracker defeats the king of mice, in others, snowflakes lead round dances. We decided to compose a fairy tale about a Christmas tree elf. It will constantly change, acquire new plots, be supplemented by characters, and most likely, it will be different every year. Only the beginning of our fairy tale will always be the same: - Once upon a time in his cozy house, among fluffy spruce branches, a little Christmas tree elf ...
like this fairytale house With our own hands, we decided to make today. Join, because the fairy tale has already begun!
For the walls, we will take a rectangular piece from cardboard box. We cut a hole for the window, and mark the place for the door. We will strengthen the walls with "wild stone". Let's take the pieces eggshell and glue it with PVA glue.
To make our masonry look more realistic, we need to simulate traces of cement mortar in the seams. Yes, and the shells will hold on tight. Tape the walls with plain gray toilet paper. When it dries, we clean off the excess, exposing the protruding parts of our “stones”.
When the scales of the cones stick well, we will fit the pipe, because the house will probably have a fireplace or a stove so that our elf lives in warmth and can cook magic potions or porridge.
We twist the pipe from a small piece of cardboard and glue it with lentils, as if it were a refractory pebble.
For greater importance, we will make a ladder for the roof. She is from the same toilet paper twisted into flagella. Yes, we almost forgot about the frame for the window, cut it out of cardboard.
Now we will install the roof in place and tint the facade of the house. We will do it with ordinary gouache. Although acrylic would be better, it is not necessary to varnish it.
It remains to glue the finished fairy-tale house on the base. Since we planned that our elf will have a light in the window, we will cut a hole for the LED in the base.
We wanted to decorate the "courtyard". Snow is cotton wool, and a snowman is also made of it. The Christmas tree is that “peeled” cone, painted in green color. This is not necessary, maybe your elf will live in a hanging house. Then only the bottom and the loop will come in handy.
We made such a fabulous house with our own hands in just one evening, and the little Christmas tree elf has already begun to live its own life. For him, a bathhouse, a cellar, and even neighbors with their houses have already been invented, this is a hedgehog and a squirrel.
Decoupage - decorate a bottle of champagne for the New Year
A handmade gift is always original and unique. Do you want to surprise your loved ones? Make decoupage on a bottle of champagne. This New Year's craft will not go unnoticed.
For decoration you will need:
- A bottle of champagne;
- three-layer napkin with a New Year's motif;
- PVA glue;
- acrylic paint;
- decorations.
First of all, you need to clean the bottle of stickers. To do this, dip it in a container of warm water and leave for a while.
We cover the entire open surface of the bottle with acrylic paint. The first layer can be applied with a brush. After drying, we paint the bottle a second time, but we already use a piece of sponge (“we smack it”).
In just an hour, the acrylic paint will dry out, so you can remove the tape from the neck and proceed to the next stage of decorating. We take a napkin for decoupage and tear out the selected fragment of the picture from it.
We remove the two lower layers from the napkin, and lay the top one face down on the stationery file. Gently add some water to the drawing, smoothing out all the wrinkles.
We smooth the file with our hands. We make sure that the napkin is securely fixed on the surface, and then carefully remove the file from the bottle.
Dilute PVA glue with water in a ratio of one to one. This solution is applied to the entire surface with a pattern with a brush. Her movements should be from the center to the edges, we try to smooth out all the wrinkles and expel the bubbles.
After the glue has completely dried, we take a finely dispersed sandpaper(better "zero") and gently sand the contours of the napkin. We also process those places where irregularities have formed.
Next, we take a sponge or a piece of foam rubber, dip it in acrylic paint, “smack” along the edges of the fragment of the picture. Thus, we try to mask the transition from the napkin to the main surface of the bottle.
The work is almost completed, it remains only to add some "zest". For example, stick a ribbon on the neck. The easiest way to do this is with a glue gun. The braid will not only complete the entire ensemble, but also close the transition from paint to foil.
Plasticine mittens - winter crafts
What could be warmer and more pleasant than warm woolen mittens that keep your hands warm on a frosty day. If you make them with your own hands, for example, from plasticine, then such a craft can rightfully be considered winter. With such mittens you can catch the magic winter fairy tale, because they are made with love and will definitely come in handy as a gift made from the heart.
On the eve of the New Year, they usually make copies of Christmas trees, Santa Claus and the Snow Maiden. The proposed mittens are unique, the craft is not like the others. And the more interesting it will be to make it with the children, especially since it is quite simple.
What you need to use for sculpting mittens:
- white and blue plasticine;
- a small strip of lace to create a believable knitted texture;
- toothpick.
How to mold plasticine mittens
The white and blue set is very good option for sculpting the selected craft. Mittens should be woolen, knitted, cozy. They are indispensable in the cold season, when snowdrifts lie on the streets, the sun shines brightly, but does not warm. We make sure to buy ourselves new accessories and never go out without grabbing this important thing.
First, make soft pellets to create the top of the craft. You need to prepare 2 balls different size. The larger one will be for the palm, the smaller one for the thumb cell. Soften the plasticine in your hands and immediately proceed to the next step.
Press down the larger and smaller white pieces to form flat cakes. Then, on one side, lightly squeeze on both sides, on the other hand, on the contrary, round and smooth with your fingers. Fasten your hand and thumb. Smooth out the seam. The body of the craft itself is ready. Don't stop at this stage either. You need to act quickly while the plasticine is still warm. Now we have to create a knitted texture.
Make the lower part - blue cuffs for accessories. Roll out two blue pieces into flat cakes.
While the plasticine on the white part of the craft has not yet frozen, make a lace surface, or rather, its imitation, using a piece of lace. Press the lace against the soft plasticine and press with a slight pressure with your fingers on its surface. After you remove the fabric, an imprint will remain on the soft surface, which will be very similar to the desired texture.
Instead of lace, something knitted is also suitable, for example, a doily or even socks. Experiment and be surprised, because this is such an unusual way of applying a relief pattern to a plasticine surface.
Make both mittens textured. On a blue background, use a toothpick to also create a knitting effect by drawing small notches.
Fasten the mittens to complete the planned craft.
An interesting winter option for children's creativity performed very quickly. In the process of work, children will learn not only to create parts of various shapes and sizes from plasticine, but also to create unusual relief patterns on a smooth surface. Now think about what else you can do with plasticine-knitted. For example, model a hat or a sweater according to the same scenario.
New Year's deer made of felt - do-it-yourself craft
The New Year's deer is a very common symbol of the upcoming holiday. Soft toy in the form of this cute animal, made with your own hands, can serve as an excellent decoration for the New Year tree, as well as a pleasant souvenir, presented from the bottom of your heart.
The process of tailoring a deer is a very exciting activity and, at the same time, quite simple, which even a primary school student can handle.
For work, we need the following materials:
- Felt medium density brown or gray;
- paper;
- pen or thin crayon;
- threads in the tone of felt or a contrasting color;
- synthetic winterizer or other filler;
- ready-made eyes or beads;
- sequins, beads or beads.
We draw a silhouette of a deer on paper or print out a ready-made template, cut it out.
We transfer the image to the felt and carefully cut out in duplicate.
We are preparing a decor that makes the deer brighter and more festive. In our case, the decoration is a snowflake, crocheted from the remains of red threads. We collect 11 air loops and close them into a ring, then we perform 14 RLS (single crochet) inside the ring.
With the help of CCH (double crochet), we knit a “flower”, trying to distribute all the columns evenly.
In the formed arcs between the dc we knit 5 dc each, between which we make arches of 10 air. loops.
We tie the resulting sbn element, knitting a pico from 3 air. loops approximately in the middle of the arch.
We iron the resulting snowflake with a hot iron, trying to give it the correct shape.
Sew a snowflake to one side of the deer. The middle of the snowflake can be decorated with sequins and beads or a button.
Glue on the eyes.
We prepare the synthetic winterizer and sew the blanks, starting with the horns. It should be noted that it is not necessary to stuff the toy with synthetic winterizer too tightly, as this can cause uneven seams.
New Year's souvenir is ready!
DIY New Year's Topiary
DIY candles - crafts for the New Year
Candles have always been an integral part of any celebration. romantic evening. After each celebration, you most likely throw away candle ends that could have been used. If you have accumulated candle ends, you can make new candles with your own hands.
Necessary materials:
- old candles;
- toothpicks;
- small sticks;
- molds.
You need to melt the wax so that it becomes completely liquid. To do this, put the wax in molds in a water bath.
Preparing molds.
When the wax has already become liquid, pour it into the prepared molds.
As a wick, you can use cotton thread, or get it from old candles. So that it does not pop up, we take out a metal holder from the old candle and attach the wick.
Then we dip it in wax.
Place any stick on top to secure the wick.
Let the candles dry overnight.
When the candles are dry, remove them from the molds. To do this, put them in boiling water for a few seconds.
To decorate the candles, I used gold ribbon and paper napkin. After I wrapped the candles, they became more festive.
To decorate a candle in a glass, I used Christmas decorations for the Christmas tree, tying it to the glass.
So in a simple way You can make Christmas candles with your own hands. You can experiment with different molds, or decorate finished candles with coffee beans.
Step-by-step master class with photos how to make it -.
DIY Christmas composition with hats
Create a Christmas atmosphere in your home with a fun arrangement of miniature hats. This master class is ideal for creative activities with children.
Necessary materials:
- Multi-colored knitting threads;
- thin cardboard cylinder;
- white acrylic paint;
- dry branch without leaves;
- glass bottle of wine or champagne.
Let's make hats from threads. Take a cardboard cylinder and cut it into rings 1.5–2 cm wide. You can also make rings yourself from thick paper fixing them with a stapler.
Cut 30 cm of thread and fold it in half. You will need about 30-40 pieces of such segments, depending on the diameter of the ring.
Pass the thread, folded in half, into the paper ring. Pass its ends into the formed loop and tighten the formed knot.
Tie the remaining threads on the ring in the same way. Try to place them close to each other, avoiding gaps.
When the ring is completely braided, thread the ends of the threads through it, as if turning it inside out.
Tie the ends of the threads with an additional thread of the same color.
Trim the ends of the threads, forming a neat pom-pom on the hat.
Spread the hat from the inside, making it more voluminous. Fluff up the pom-pom.
Similarly, make hats of other colors.
Let's make a small winter composition. This will require a small dry branch, which can be found in the park.
Paint it white to create the effect of a snow-covered winter branch. Leave it to dry.
Take an empty glass bottle and apply 2 coats evenly acrylic paint, being careful not to leave highly visible brush strokes. Let it dry completely.
We collect the composition. Place the branch in the bottle. Put on hats for small branches. You can decorate the branch with threads and beads.
Detailed master classes with step-by-step photos here -.
Wreath for New Year and Christmas from willow branches
The next master class is "Christmas wreath with your own hands."
To make jewelry, take the following materials:
- Willow twigs (medium thickness);
- New Year's tinsel;
- cones;
- items for decorating cones (paints, sequins, beads, rhinestones, and so on);
- moment glue, thin copper wire or nylon thread for attaching decorative elements.
Important! So that the vine does not break, you need to weave as soon as it is broken. If the branches dry out, nothing will work.
Let's start forming a wreath.
We take several thin branches (long) at once and form a ring, intertwining them with each other.
If it doesn't work right away correct form, do not be upset, with subsequent weaves, the ring will align. It is necessary to weave the vine, securing the end between the rods of the previous circle.
Thus, we continue to weave a wreath to the required size.
The basis for the festive wreath is ready, now you can move on to the decoration.
We take tinsel and wrap the finished ring so that gaps are visible. At the bottom of the wreath, we leave a little space for attaching decorative cones.
Let's move on to decorating the cones. To do this, you can use everything that your imagination has enough for (paints, rhinestones, beads, ribbons, sparkles, and so on).
As a result, we got such beautiful decorative cones.
To attach the cones to the wreath, you can use moment glue, thin copper wire or nylon thread. In my case, glue was used.
That's all, wreath to holiday decoration ready at home. Spent a minimum of effort and time, but received a maximum of pleasure from pastime.
You can even bring the whole family. This will make things much more interesting.
New Year's crafts - do-it-yourself boots
You can put a New Year's gift to a child in a felt boot sewn with your own hands.
You can hang such a textile decor on a Christmas tree or a doorknob.
For work you will need:
- piece of fabric;
- edging for the top;
- decorative braid and beads for decoration.
If the fabric is thin, you can make the boots double - lined, it will look more voluminous and presentable.
Decide on the size of the boot. Reshoot the pattern of the boots. It is as simple as possible, you can draw it yourself, leave some space for seam allowances.
Since in this case raincoat fabric was chosen for the felt boot, the pattern was also transferred to the lining.
Secure the fabric with pins, stitch along the line, cut out the workpiece.
In places of rounding, carefully make notches with sharp scissors. Turn out the boot.
Felt or a thin strip of fur is suitable for edging. Remains of overcoat fabric are used here.
Decorate the boot with snowflakes or appliqué. Sew on a loop so that the boots can be hung. Make buboes from a small piece boucle, assembled and sewn in the form of a ball.
Such a boot can be useful not only as a package, but also as a decoration.
New Year's boot with a bunny
New Year's gifts for all children are the most desired. They write letters to Santa Claus, asking him to give them toys and sweets. Then they wait for the fulfillment of all desires. A good wizard will surely respond to their requests. Under the Christmas tree new year's eve children find plush bunnies and bear cubs, dolls and baby dolls. And also a gift in the form of crafts can be made with your own hands from any materials available for children's creativity, for example, from plasticine.
This lesson shows the stages of making plasticine crafts for the New Year in the form of a bright boot with a bow, filled with gifts, the main of which is a white bunny.
for modeling new year gift prepare:
- white, red, blue, black, green plasticine;
- tool.
How to make a New Year's craft from plasticine
The plasticine set contains not just bars, but a whole treasure, toys, accessories, even gifts for the New Year. All products are easy to make yourself, having at hand detailed instructions, which is what this detailed master class. Imagine and enjoy the creative process.
To get started, take the red plasticine and knead it thoroughly in your hands. Form a boot from the soft mass. Pull the mass into a cylindrical part, then pull the resulting cylinder on one side, press down with your fingers at a right angle.
In the right places, simply smooth the surface of the boot, giving a believable look. The base of the craft is ready. Of course, in fact, the part should be hollow inside, but we will not cut a hole, but we will simply put the bunny toy on top, more precisely, we will make only its upper part.
To decorate your New Year's product, draw out a few strands of white, green, of blue color. Roll out the soft mass with your fingers with light pressure, pressing down on a hard surface.
From a thin green sausage, make a fringing for the top of the boot. Use a blue sausage to model a bow - it will look very nice on a gift. Twist the white and red sausages into a flagellum. Press down over the entire surface. Trim off the excess on both sides. Then bend so as to get Santa Claus's staff.
Form blanks for the upper part of the bunny figurine. At plush toy we will show only the head with long ears, front legs. Use white plasticine for modeling.
Stick white cheeks on the head ball, pierce them with a toothpick, showing hairiness. Attach black eyes and nose. Give the rest of the white pieces the shape of the ears and paws.
Glue the details to the top of the red boot so that the impression remains that the bunny is sitting inside and just looking out.
Add decorative elements previously prepared. Place a white and red staff near the bunny's head. Add a bow to the top of the shaft.
A unique plasticine gift dedicated to your favorite holiday - the New Year - is ready. Having made the same base, you can put a bear or a gingerbread man in the boot. Either option would be welcome and so cute.
Children can also be involved in the manufacture of the following crafts for the New Year. Such joint creativity will bring great joy to both children and parents. After all, on winter holidays I want to decorate my house in a special way. You do not need to master complex needlework techniques, you can try to make something interesting from ordinary white paper.
All of us in childhood learned to cut lacy snowflakes from paper folded in several layers. But decorating your home with snowflakes is too banal and simple. Turn on your imagination, let the openwork weaves turn into dresses for graceful ballerinas soaring under the ceiling.
For work you will need the following materials:
- Sheets of white paper;
- scissors;
- pencil;
- fishing line.
First, on paper, draw with a pencil the silhouettes of graceful ballerinas who raise their legs and move their arms to the sides. Or download ready-made ballerina templates. Cut out their images along the contour. Then make the most openwork snowflakes to keep them fluffy and light.
Try to cut a hole in the center so that the ballerina can fit into it. Glue the snowflakes at the waist level of the dancers.
Watch a video tutorial on how to make such a Christmas decoration - do-it-yourself ballerina snowflakes.
Volumetric foam snowflakes
All the same openwork paper snowflakes are taken as the basis, the pattern is transferred, for example, to polystyrene or polystyrene foam. With the help of a sharp knife, all the necessary elements are cut out, and as a result, unusually beautiful, voluminous snowflakes are obtained.
DIY Christmas toys.
Click Class
Tell VK
Crafts can be made from absolutely any materials: from felt, paper, thread, cones, etc.
We create the most important and valuable things with our own hands and, of course, they are preserved as a memory. What's this baby and you've done in different years. You can even build a chronology. And you can work hard once and save a lot on festive decor. Decorate the Christmas tree with homemade felt figures or balls of thread, completely creating a design version of the design.
And how will your children remember the evenings before the holiday, which they spent in joint preparation and creation of masterpieces.
Knowing how busy moms and dads are right now, I picked up a few quick, but beautiful options crafts. Which are not ashamed to show and easy to do.
A very easy craft to make. Another option for an interesting pom-pom dog.
I propose to make a cute dachshund out of paper and toilet paper rolls.
We will need:
- Brown and orange colored paper
- 1 sleeve
- Plasticine
- Double sided tape
We cut out a semicircle with a diameter of 8 centimeters and turn it into a cone. This will be the head of our dog.
Now we cut out a rectangle of brown paper measuring 12 * 20 cm and glue the sleeve with it, bending the ends inward.
Now we cut out 2 ears in the form of elongated ovals from orange paper, a long tail and 4 strips, which we will roll in the form of paws. The size of the strips is 2*20 cm.
Glue the ears to the cone.
Glue the tail and paws to the sleeve.
We do the paws like this: we take a strip and wrap it around the finger or around the body of the glue-pencil, smearing the top layer with glue to secure the circle.
Now we attach a nose to the head from black plasticine, we make eyes from white and green.
We glue the head on double-sided tape to the body and that's it.
"Santa Claus's Shoe" with your own hands to kindergarten and school
Plastic bottles are on the move this holiday! We make bells from them, then containers for gifts,.
And today you can quickly sew a presentable craft from improvised materials in kindergarten ik or school.
Only fabric is better to take bright colors. And it will be faster if you use a glue gun.
We make a Santa Claus shoe from a plastic bottle.
We will need:
- Plastic bottle
- red cloth
- Braid and decor
- Cardboard sheet
We cut the bottle into three parts: we need a bottom and an oblong body. You can leave the neck of the bottle under the craft "Bell".
We measure the approximate length from the beginning of the bottom to the heel of the future shoe and cut out the base in the form of a foot from cardboard. You can circle the contours of the bottles directly onto the cardboard.
The sole is cut out and sheathed with a red cloth.
Measure the diameter of the bottom and cut out the same circle from the fabric with three cm allowances. The top must be sewn up so that the fabric gathers in shape.
We cover the bottom with fabric and sew to the sole.
Now we take the tube from the body of the bottle and also sheathe or glue it with a cloth with hot glue (we don’t glue the seam at a distance of 3-4 cm from below). You can use crystal glue. And we also sew or glue the covered part to the base - the sole.
It remains only to decorate all the seams and voids. To do this, use braid, cones, tinsel, Christmas tree branches.
Shoe height may vary.
You can also not glue it inside, but collect it on top with a ribbon, like a bag for sweets.
How to make beautiful Christmas paper crafts
I propose to make not only paper crafts, but a whole voluminous christmas decor. Believe me, it is not difficult, as it may seem at first glance.
It is better to use a beautiful cardboard. You can buy it a little thicker than normal at a scrapbooking and craft store.
We will make a wonderful Christmas tree out of cardboard. But the cardboard needs double-sided.
Now we draw a Christmas tree template.
1 side of the Christmas tree 7 cm.
5 sides of 6 cm, the edges coincide with bottom first template.
Now we make three cuts to the middle of the Christmas tree: the distance between them is 0.5 - 1 cm. The middle cut is a centimeter higher than the side cuts.
The first template has slits at the bottom.
Three have slits at the top, two at the bottom.
We begin to thread the Christmas tree into each other.
1 template is the center. They are threaded alternately into each incision. First, to the leftmost, then the middle one, and so on until the Christmas tree is assembled.
Such a Christmas tree can be large or more voluminous and made of thicker cardboard or plywood, if you have a craftsman who can do any job and even cut and sand a blank for you.
Children's crafts for the New Year
New Year - these are the symbols of deer figurines, Santa Claus and Snow Maiden, sleighs, gifts, Christmas trees and balls.
Therefore, you can quickly make a Santa Claus figure using the origami technique.
A small child of four years old needs to be helped to make straight folds, otherwise Frost may not work out, and the child will be upset. All such, this technique perfectly improves fine motor skills and control of your hand.
We take a sheet of paper, it should be two-color. Square size 10*10 cm.
We direct the diagonals on the square, turning the corner on one side and repeating the same on the other.
We work on the white side.
Fold the top corner towards the center.
Now we turn the corner to the edge. Expand and see the lines.
Now wrap the bottom edge up to this line and turn.
Let's check this.
We wrap the lower part to the already wrapped edge and make a lapel back to the bottom point.
The opening looks like this.
Now we turn the workpiece over to the front side, we need to wrap the side part. We wrap a small strip on one side and the same on the other.
Now we turn the side parts to the center line.
It remains to make a hand to Grandfather. We wrap the protruding edges.
We turn diagonally.
Now, when you unfold the figure, you will see that Santa Claus has already turned out. It remains to draw a nose and eyes.
A garland of such Frosts will look very interesting.
You can, taking cotton pads, make voluminous crafts on cardboard. They are perfectly painted and glued with ordinary PVA glue, which. As we know, absolutely non-toxic.
Here's another idea, using cotton pads you can make a cute white bear.
Also look at how cute a sheep can be made from cotton buds, paper and a wooden clothespin.
Interesting crafts are also created from ice cream sticks. You can ask for them in any supermarket, they are usually given with popsicles.
A snowflake is glued with hot glue. We paint it in the desired colors and hang our craft on the wall or window.
You can sprinkle with sparkles or shiny varnish. You can also put a garland on it or stick other New Year's decor on it: light balls, braid, bumps, twine or gold braid.
Another version of the snowflake in the photo below.
And more options.
Another interesting option crafts, which we also use for home decor, are hanging snowflakes made of cardboard.
