1. We work with a woolen thread folded in half. We create a loop.
2. Then we form 12 stb. without a crochet.

   

3. We do two stb. single crochet in each loop, knitting a total of 24 columns.

   

4. We form another row of columns (1 in each loop), only 24 pcs.

   

5. Next, we create a product according to the scheme. Starting from the fifth line, we knit 1 stb. single crochet, 2 stb. single crochet + air. a loop.

   

6. We form 1 stb. single crochet (x 2 times), 2 stb. and air. loop. Then we knit a line consisting of 1 stb. single crochet (x 3 times), 2 sc. + air. a loop.
7. Now, after a row, we begin to reduce the number of loops so that the pattern takes on the intended look. To do this, we make 2 stb. single crochet together, 1 sc. (x 2 times), 2 sc. and air. loop.

   

8. The next row looks like this - 1 stb. (x 4 times), 2 stb. + air. a loop. Repeat this pattern to the end of the line.
9. We form a line from 2 stb. together, 1 sc. (x 3 times), 2 sc. + air. loop (repeat to the end). Do not worry if tails appear on the product, until the end of knitting everything will fall into place and the pattern will appear as intended.

   

   

   
   
10. We continue to create a beret according to the scheme. The diameter of the product for adults should be 26-28 cm. Reducing the loops must also be done according to the drawing.
11. We create the penultimate two lines from the columns, knitting them through each loop. In the third row we put a previously prepared elastic band and tie it so that the beret fits snugly to the head. We tie the last line together with the third, neatly finishing the work in this way.

    

    

    

12. If desired, the product can be decorated with a flower, a small pompom, rhinestones, sequins or other decorative elements.

In the cold season, you really want to please yourself and your loved ones with beauty, which is so rare around! And it’s not at all necessary to grieve for summer days, you can bring comfort to the house based on winter fairy tale if you know how to create holiday symbols of winter with your own hands. To do this, you can use yarn, knitting needles or crochet. It must be said that winter theme in crocheting or knitting, perhaps, the most relevant, and the New Year theme is one of the most beloved by all craftswomen - because it is so uplifting!

One of the many interesting winter elements that you can decorate your home during winter holidays, and everyday life too, are crocheted snowflakes. It's very cute and gentle openwork products, which can be "applied" in the economy in a variety of ways:

• Christmas decorations;
• holiday coasters for cups and glasses;
• New Year's key chains;
• sticker decorations for simple jars-bottles;
• decor elements New Year's gifts and postcards;
• stripe on sweaters, hats, scarves.

In general, crocheted snowflakes will come in handy in everything that has enough imagination. Today we will learn to crochet these useful decorations, and diagrams and descriptions will help in this, which will be useful for both beginner needlewomen and professionals who are looking for different options for snowflakes.

Crochet snowflakes - diagrams with a description for beginners

The great news is that the shapes of crocheted snowflakes can be very different, as well as the sizes, which means that it will definitely not be boring to knit them. Moreover, after educational practice newcomers to crochet will be able to knit a snowflake according to their idea, getting an original and beautiful decoration own authorship.

But first, let's look at a few traditional crochet snowflake options. To learn how to crochet patterns that turn into snowflakes, you should follow the following recommendations and patterns.

How to tie the simplest snowflake?

Crocheting snowflakes is also suitable for beginners in this business, if you choose among the easy options for patterns. We present several types of crochet snowflakes that are easy to knit if you follow the detailed description.

Popular articles:

Simple crochet snowflake No. 1

This snowflake is knitted according to the following pattern and detailed description with photo:

We make a ring of thread and knit 1 lifting air loop.

1 row: we knit 8 single crochets into a ring, tighten the ring of thread and knit a connecting stitch, inserting the hook into the 1st single crochet of this row.

2 row: we knit 3 lifting air loops + 2 air loops according to the pattern (i.e. we knit 5 air loops), in the next loop we knit a double crochet, then we knit 2 air loops, * in the next loop 1 double crochet, again 2 air loops * from * continue to knit to the end of the row.

We close the row with a connecting column, insert the hook into the 3rd lifting air loop.

3 row: in order to move on to knitting from the arch, we knit 1 connecting column, then 2 lifting air loops, we knit 3 columns with a crochet with a common top, then we knit 5 air loops, * in the next arch we knit 4 columns with a crochet with a common top, again 5 air loops *, continue to knit from * to the end of the row. We close the row with a connecting column, introducing a hook into the common top of the columns.

4 row: ch 1 and 1 single crochet in the same base st, work picot of 3 chain sts, and single crochet in the same base st, then work picot of 5 chain sts, and single crochet in the same base loop, we knit a pico of 3 air loops and a single crochet, inserting a hook into the same loop, then we knit 3 air loops *in the common top of the next group of columns, we knit 1 single crochet similarly, a pico of 3 air loops, 1 single crochet, picot 5 stitches, 1 single crochet, picot 3 stitches, 1 single crochet.

Let's try to crochet a few more options simple snowflakes and help us with this detailed wizard classes.

Simple crochet snowflake No. 2

To make it easier and more convenient to work with the diagram and description, we will use the following abbreviations:

VP - air loop;
PSN - half-column with a crochet;
SSN - a column with 1 crochet;
RLS - single crochet;
CC2H - a column with 2 crochets;
SS3N - a column with 3 crochets;
SS - connecting column.

Scheme and progress of work:

1 row: 4 VP (replacement 1 SSN + 1 VP), * 1 SSN, 1 VP * 6 times. Tighten the slip knot. Connect the circle of PSN in 3 VP of lifting the row.

2 row: 1 VP, 1 RLS in the same arch, * 5 VP, 1 RLS we knit in the arch between the CCH of the previous row *. From * to * repeat to the end of the row. The row ends with 1 sc in the arch, 2ch, 1 dc in the first sc at the beginning of this row. Thus, each new row will begin in the middle of the previous petal.

3 row: 4 VP, 1 RLS in the same arch, * 5 VP, in a large arch we knit 1 RLS, 3VP, and in the same arch 1 RLS *. Thus, we repeat from * to * until the last arch. In the last arch of the row we knit 1 RLS, 3 VP, 1 RLS and finish the row with 2 VP, in the first VP of the lift we knit 1 CCH. And again you should be in the middle of the petal.

4 row: 4 VP, 1 RLS in the same arch, * 7 VP, in a large arch we knit 1 RLS, 3VP, and in the same arch 1 RLS *. Thus, we repeat from * to * until the last arch. In the last large arch of the row we knit 1 RLS, 3 VP, 1 RLS and finish the row with 3 VP, in the first VP of the lift we knit 1 SS2N. And again you should be in the middle of the petal.

5 row: 4 VP, 1 RLS in the same arch, * 9 VP, in a large arch we knit 1 RLS, 3VP, and in the same arch 1 RLS *. Thus, we repeat from * to * until the last arch. In the last large arch of the row we knit 1 RLS, 3 VP, 1 RLS and finish the row with 4 VP, in the first VP of the lift we knit 1 SS3N. And again you should be in the middle of the petal.

6 row: 4 VP, knit 5 RLS in the arch, * 5 VP, knit 5 RLS-3 VP-5 RLS in the large arch. Thus, repeat from * to * until the end of the row. The row ends with 5 sc in the last large arch and sl-st in the first 1 ch of the rise of this row.

We offer another option. crocheted new year snowflakes useful for decorating your home.

Simple crochet snowflake #3

You need to start knitting from the center, and you can do this in two ways:

1. We make a chain of several air loops, connect it into a ringlet and knit further.
   we wind a ring on a finger from a thread and tie it with single crochets;
2. We collect 5 air loops and close the ring. We knit a connecting column and 3 air loops of the first row.

Again we make a connecting column and three air loops, closing the arc with a connecting column. To make it clearer, look periodically at the photo below.

There should be 6 such arcs. Close the row with a connecting post.

We tie the first arch-arc: 1 single crochet, 3 air loops, 2 single crochet.

We also tie the second and third arch: 2 single crochet, 3 air loops and 2 single crochet.

We repeat three more times. This is the end of the master class for beginners. We already have an openwork little star. But let's try to connect it even more and more beautifully.

Third row, start with connecting post. Next row report: 1 single crochet, chain 3, single crochet 1, chain 5, single crochet 1, chain 3, single crochet 1, chain 2.

Repeat the row report 5 more times.

We got a crocheted openwork snowflake, which can be starched and hung on a Christmas tree.

Master class on knitting beautiful snowflakes for the New Year

If the question “What would please the household during the winter holidays?” the answer will be “make something beautiful with your own hands”, then crocheted snowflakes are exactly what you need! These small winter symbols can be used for a variety of purposes and will bring a special mood to everyone without exception. But first you need to choose the appropriate crochet snowflake patterns, and consider a few master classes.

Description abbreviations:

VP - air loop;
SSN - double crochet;
RLS - single crochet;
P5 - pico of 5 VPs;
P3 - pico of 3 VPs;
SS - connecting column;
PRSP - half-column with a crochet.

We knit a snowflake:

Please note that at the beginning of the row, instead of the columns, we knit the VP.

CCH = 3VP; RLS \u003d 1VP.

We start with the ring.

1 row: * 2SSN with a common top, 3VP * x 5 times, SS;

2 row: * (1SBN, 5VP, 1SBN) - in one loop, 4VP) * x 5 times, SS;

3 row: 3SS, in the arch of 5VP - 2SSN, 2VP, under the arch of 4VP - 1СБН, 2VP

* (2SSN, 3VP, 2SSN) - under 5VP, 2VP, 1SBN under the next. arch, 2VP) * x 4 times.
The end of the series - 2SSN in the first arch with which the series began, 1VP, 1PSSN in the third VP;

4 row: under the just connected PSSN - (1SBN, P5, 1SBN, P3), 2VP, 1SBN - in the 2nd CCH, P3, 2VP, under the RLS - SS. Half of the ray is knitted.

We knit the next five in the same way.

We continue to knit after the SS
* 2VP, 1СБН we knit in SSN, P3, 2VP, under the arch - (1СБН, P3, 1СБН, P5, 1СБН, P3), 2VP, 1СБН in the 2nd SSN, P3, 2VP, under RLS - SS *.

We tied five rays, and we knit the sixth one - 2VP, 1SBN, P3, 2VP, under the 1st arch - 1SBN, P3, SS.

We fasten the thread and cut it off. Snowflake is ready!

Another version of a crocheted snowflake might look like this:

Description abbreviations:

P6 - pico of 6 VPs;
SP - connecting loop;
RLS - single crochet;
VP - air loop;
CCH - double crochet.

We knit a snowflake:

At the beginning of knitting snowflakes, we collect a chain of 6VP. Do not forget about replacing the first columns of the VP:

• 3VP are equal to 1SSN;
• 1VP is equal to 1SBN.

1 row: 1VP, 11SSN, SP;
2 row: (2SSN, 3VP) - 6 repetitions, joint venture;
3 row: (2СБН in the tops of the CCH of the second row, under the arch - 2CCH, 4VP, 2CCH) - 6 repetitions, SP;

4 row: (2SP, in two SSNs we knit 2Scn, under the arch - 1Scn, P6, 1Scn, 1sn, trefoil from pico (P6), 1sn, 1sbn, p6, 1sbn, 2sbn in ssn 3rd row, 1ch, skip two loops) - 6 repetitions , SP.

We remove all excess threads, fixing them, and cut them off.

We starch the openwork motif, align it and fix it with pins, let it dry. The crochet snowflake is ready.

Video lesson

Beginners in such a difficult task as crocheting always come to the aid of visual lessons that help to avoid the simplest mistakes and pay attention to important points that master classes in photographs do not always fully convey. Here is a video lesson that will help to crochet a snowflake even for those craftswomen who take up this for the first time in their lives.

Video “crochet snowflakes for beginners”

As you will see, tying it is very easy (and very fast) even for a beginner. For knitting, I used hook 4, woolen threads in two additions, a thin elastic band (you will need it when knitting a band). The beret is knitted in a spiral, without lifting posts.

So, we take the threads, we begin to knit.

1. Make a loop.

2. 12 sc (single crochet).
3. 24 sc (2 in each loop).
4. 24 sc (1 in each loop).

5. Girls, look at the diagram, the 5th row is marked.
1sc, 2 sc, ch, continue to the end of the row.

6. 1sc 2 times, 2 sc, ch, continue to the end of the row.

7. 1sc 3 times, 2 sc, ch, continue to the end of the row.

8. Please note that from this row we begin to make decreases through the row (with their help, the wedges will begin to wrap).
Knit 2SC together, 1SC 2 times 2 SC, VP, continue to the end of the row.

This is how the reduction is done.

9. 1sc, 4 times, 2 sc, ch continue to the end of the row.

10. 2СБН knit together, 1СБН 3 times, 2 СБН, VP, - to the end of the row.
At first it will start to fold, don't worry, keep knitting, everything will fall into place.

Girls, we continue to knit according to the scheme, making increases and decreases through the row, until the required diameter is reached (for children 24-25, adults 26-28 cm). Then, according to the scheme, we begin to make decreases.

The last 2 rows knit in columns in each loop. At 3, lay an elastic band and tie it.
Tie the 4th row together with the 3rd row (see photo).

Here is our beret ready !!!

Now it's up to you to come up with baby dolls, buboes and flowers.