For many people, the hare symbol is identified with something sweet, innocent, soft, beautiful, kind, bright and pure. You can see the hare pattern in our article - we have collected a photo and video selection that will be useful to you!

Nowadays, toys in the form of a hare from soft to hard are very common.

Every person will be pleased to receive a handmade bunny as a gift. It is this toy that can serve as a symbol of beauty and a friendly attitude towards a person, which is why the appearance of bunnies is very popular in our time.

They can even be knitted, or they can be hard, molded from clay.

In this article, you can find a description of patterns for hares of completely different sizes and styles. We hope that you will like all the options for hare patterns.

Toy bunnies delight the eye with their variety: with long ears, large and small, fluffy and lint-free.

The bunny and his image will be very relevant in anticipation of the Easter season. It is believed that the hare is a lunar beast.

Even such a beautiful animal as a bunny has its own ambiguous reputation. On the one hand, it is a fast, dexterous, very vigilant and prolific animal, but, on the other hand, it must be cunning, cowardly and deceitful.

Let's stick to the good stuff and make beautiful, kind bunnies using the patterns from this article.

So let's get started.

On this moment, Teddy technique toy patterns are gaining popularity. Therefore, let’s not be old-fashioned and pay attention to this fashionable trend among needlewomen.

The next master class on making a bunny will be using Teddy's technique. You will learn how to sew a hare with your own hands using patterns.

Features of Teddy toys are a thoughtful and sad look.

We study available patterns for creating a hare using the Teddy technique

• paper
• pencil
• textile
• threads
• padding polyester
• two buttons

Draw hare patterns on paper with a pencil.

First, you will need to decide on the size of your future animal. Therefore, think carefully before you start making a pattern.

1. Two parts for the body are made. It is enough to cut out one detail on paper, which will later be transferred to the fabric. Next, draw the paws of your future bunny, which will be the legs, draw the handle, heel, and palm. Long ears your future bunny.
2. Transfer patterns to fabric.
3. Cut out the resulting silhouettes of the future Teddy bunny.
4. Sew each piece together, placing them right sides up. Leave a small hole in the body in order to fill it with padding polyester. Also, leave it in the legs, head, arms.
5. Turn your future bunny right side out.
6. Stuff future products with padding polyester.
7. Sew the resulting parts together.
8. Sew on the eyes - buttons, and use threads to make the nose and mouth of the future bunny.
9. Finish the product by decorating with the necessary accessories.

Your Teddy bunny is ready. You can give such a nice toy even to a child, he will be very happy.

Such a bunny can be a decoration for your home and will serve as decor in any interior. It will be a wonderful gift for any adult and child. You can make your own craft, both large and small.

In the video tutorial you can find all the necessary information.

Video on the topic of the article

Fluffy easter bunny. Sewing from fur with ears using the dry felting technique. Master class from the author - Irina Shcherbakova Irentoys

To create this bunny we will need:

• fur (I have plush with a pile of about 13 mm);
• eyes 12 mm;
• O-shaped cotter pin - 2 pcs. or T-shaped - 1 pc.;
• washers for cotter pins;
• disk with a diameter of 20 mm - 2 pcs;
• felting wool to match the fur and some dark wool;
• needles for felting (No. 36, 38, 40);
• scissors;
• nylon thread for tightening;
• glue;
• pastel.

The rabbit pattern is given below, but since I didn’t have one at first, I had to sculpt the bunny from plasticine.

Then take the pattern onto tracing paper, transfer it from tracing paper to paper and bring it to fruition.

Here is the pattern. It shows letters that can be transferred to the fur to avoid confusion. The arrow indicates the direction of the pile. Paired parts must be mirrored.

We transfer the pattern to the fur, according to the direction of the pile. We cut out the parts, not forgetting about the allowances (about 7 mm) for the seams.

First we sew the darts on all the parts of the head. All seams are made using a fine back stitch.

Now it's time to sew the head parts together. The pattern has letters for this purpose. First we sew the side symmetrical parts (segment AB). Then we sew in a small part of the chin (segments BV and VB).

This is what happens. Now it’s the turn of the top of the head.

We stitch (segments AG and GA) and turn them inside out through the remaining hole.

Important! If your material frays along the edge, then you need to coat the edges with PVA glue diluted with water 1:1. In my case, the base of the fur is very strong, dense and not friable, so I don’t do this.

Stuff tightly.

Before sewing up the head, insert a cotter pin into it according to the diagram. Sew up the head with a hidden seam.

We do the same with the details of the body. First we sew the darts, then we sew the parts according to the indicated letters, leaving a hole for turning them inside out. Having turned it inside out, we put it aside and return to the head.

Using a strong thread (I have a nylon thread) in two layers we tighten the eyes. We insert the needle into the place of the darts on the sections AG and GA of the upper part of the head. Then we insert the needle next to this place 7 mm towards the back of the head. We remove the needle in the place where the fastener is located. Tighten and tie.

Let's start grooming the rabbit. On the entire muzzle in front we leave a uniform short pile, with smooth transition on a long pile at the back.

We trimmed the cheeks and the lower part and we see that a mouth has appeared, which also needs to be tightened. To tighten, insert a needle and thread into point B, then into the place where the eye was tightened, then into the place of attachment. We do the same with the other end of the thread.

I took transparent eyes and painted them with dark brown acrylic. In places where the darts on the top part coincide with the side parts, eyes will be sewn in. We find these points and mark them with pins. Checking the symmetry of the pins.

We sew an eyelet into this place. Behind the eye, towards the top of the head, we also cut off the pile.

We coat the knots of threads from tightening and from sewing on the eyes with glue. Cut it off with scissors.

We insert a fastening pin with a head into the body blank (at point E). We put a disk and washer on the cotter pin. We tighten, or rather wedge, the cotter pin with thin-nose pliers.

To the same twisted cotter pin we fasten a nylon thread in two folds to tighten the body. We thread the ends of this thread into the needle and draw out the bodies from below at point G, leaving a small distance between the ends of the threads for further tightening.

Pour in granulate. We stuff it with padding polyester and sew it up with a hidden seam.

The final step for the sewn part will be tightening the body.

The result is a blank that is simple and which we will complicate with added parts. Go.

Take two tufts of wool for the ears. Using a coarse needle, shape the approximate shape of the ear.

Let's try it on, taking into account that the ear will shrink by a third. We work the surface with a thin needle, forming the bends of the ear.

Except for the lower fluffy part, which will fall against the head, the entire ear is completely sanded. We try it on, fixing it with pins.

It's the turn of the front paws. We take the same amount of wool for each. We begin to form a paw out of wool with a fluffy end to roll onto the body. The fluffy end should point upward.

On the paws we work on the fingers with a needle. Try it on, securing it with pins.

Fur keychains have long become not only the highlight of fashion shows, they have stepped “into the people” and quickly gained particular popularity among the female population. Who would refuse a cute furry animal? After all, he is so cute and fluffy!

Do-it-yourself rabbit keychain made of fur - pattern, mk

Of course, it’s easier and faster to buy a ready-made fur keychain, but if you get excited about the idea and find the right fur and free time— we suggest you sew your own keychain in the shape of a rabbit from faux fur. For a keychain, in addition to fur, it is advisable to purchase a metal carabiner. The figurine is 15 cm high. A piece of fur (corduroy, knitwear, plush or fleece) should be 35 cm long and 45 cm wide.

To work you will need:

1. 1. Natural or artificial fur (35/45 cm)
   2. A piece of leather or leatherette 6 cm long, 1 cm wide for a loop for a carabiner.

1. 2 buttons for eyes.
2. Pink threads for the mouth.
3. Scissors, threads to match the color of the fur.
4. Sintepon or cotton wool for stuffing.

Pattern number 1.

Enlarging the pattern. Let me remind you: the length from the top of the head (point D) to the back point (point O) will be approximately 15 cm. We look at the letters - all the letters indicate the points where the parts combine. That is, for example, the neck of a rabbit: the BG segment should be combined with the BG segment on the rabbit's head.

On pattern number 1 we see: head - 2 parts, back - 2 parts, ear - 4 parts.

Pattern number 2.

On pattern number 2: forehead of the figure - 1 piece, Bottom part abdomen - 2 parts.

We transfer the paper pattern to the fabric: pin it with tailor’s pins, not forgetting to add another 0.8-1 cm to the paper pattern for allowances. In the figure, 2 ears are located on a common pattern, and 2 ears are located separately - this means that the inner ears can be made not from fur, but from knitwear, fleece, and so on.

Next: we sew the undercut GHG from the wrong side, as well as the undercut JIJ on the forehead of our workpiece. We also decorate the ears: we fold the 4 parts of the ears, front to front, and stitch them, leaving the top of the ears unstitched. We will stuff the ear with padding polyester through the top. We stuffed it with padding polyester (lightly) and sewed up the cut by hand, hiding the unstitched edge.

We sew the ears with a cut (DE) to one and the other part of the head. Only then do we sew up the back of the head (AB). Next, we need to sew the bunny's forehead to the head. We combine all the points of the forehead and head, sew as shown by the arrows in the figure. Don't forget to insert a piece of leather into the top for a loop under the carabiner.

Then we sew up the dart on the rabbit's belly. We combine the parts of the back and abdomen, pin and stitch.

We sew the head to the body, leaving an unsewn section - at the end we will stuff the entire body with padding polyester through it.

We stuff it with padding polyester and manually sew up the hole with a hidden seam.

If your fur begins to fall out at the edges, coat it with regular PVA glue diluted with water (1 part glue / 1 part water).

Click to enlarge the rabbit or hare.

Some explanations on sewing from patterns: 1. Along the upper pattern, triangles are added there - allowances so that when turning the parts made of dense fleecy material do not puff up. You need to cut out 2 pieces for the body and head and 4 pieces for the ears. The sewn and stuffed parts (the direction of stuffing is shown by arrows) must be connected to the letters indicated on the pattern

2. according to the bottom pattern, then part 6-6-4, then sewn into the back of the rabbit’s head, with a tapering angle towards the back. Part 6-6-5 - in the front of the head, at an angle of 5 to the nose. etc. All parts are numbered along the edges, due to which you can understand how they are located.

For convenience, I am posting both articles here:

And now our advice:

First of all prepare workplace . An immutable rule: the light should fall from the left side. There should be nothing unnecessary on the table at which you will work.

It is advisable that the table surface is not polished. It is better to cover it with white rough paper.
Place tools on the right and samples and instructions on the left. It is good if you prepare a waste basket in advance, then the workplace will be clean all the time, which also creates a good work spirit.

TOOLS:
For work you will need following tools:
- awl;
- ruler;
- pliers;
- pencil;
- scissors;
- pattern cutter;
- needles;
- iron;
- threads;
- cardboard;
- shreds;
- tracing paper;
- wire;
- copy paper.
- penknife;

Awl will be needed for piercing workpieces.
Pliers will be useful for giving the desired bend to the wire frame.
Needles we need different ones. It is good to sew on beady eyes with a very thin needle. The parts of the toy are sewn together with a medium needle. (A darning needle is not suitable because its eye gets stuck in the fabric.) A large needle is useful for working with fluffy threads.

Needles must be in the pincushion. If you are not working with a needle, immediately stick it into the needle bar so you don’t have to look for it later and, most importantly, don’t get pricked.

Scissors must be sharp and different sizes. Small rounded scissors (nail scissors) are good for cutting out round shapes, while medium scissors are good for cutting fabric.

MATERIAL FOR TOYS.
Any unnecessary scraps, old felt hats, and worn woolen items will be useful for making. As for cotton fabric, then, of course, it is better if the fabric is new - bright and strong.

Cardboard patterns for can be made from candy boxes or shoes.
Wire It is better to use copper. It bends easily and is cut with simple scissors.

Braid and lace, buttons and beads for eyes can be found in any home. And so that the button becomes the desired color, it can be painted with nitro paint. It's good if the button has a leg.

HOW TO DYE A BUTTON.
We attach two buttons or beads to the ends of the wire. We bend the wire. Dip the buttons into a can of paint. We take it out, let the paint drip off and hang it to dry.

PADDING.
It is best to stuff the toy with industrial cotton wool, which is easier to work with than medical wool. You can use scraps of unnecessary shreds or padding polyester.

THREAD.
It works well with white and black threads No. 40. Red floss colors will suit for mouths. Bangs, braids, manes, and ponytails can be made from wool or artificial threads.

HOW TO WORK WITH PATTERNS.
In the “design - toy” section (or by the ““ tag) drawings of soft toy patterns are given. But you need to get your pattern. Print out our patterns or redraw them on tracing paper, and then transfer the pattern onto cardboard using carbon paper. If you don’t have carbon paper on hand, you can make such paper yourself. For this reverse side tracing paper should be shaded with a soft, simple pencil.

Some patterns in the “toys” section have been reduced in size. To enlarge the pattern to its natural size, you need to draw it into squares with a side of 1 cm, and then draw a grid with a square side of 2 cm and redraw the pattern into it square by square.

After the pattern drawing is transferred to cardboard, carefully cut it out with scissors. Keep the patterns in separate envelopes, as they may still be useful to you.

Then take the desired fabric and iron it well. Place the ironed fabric face down on the table. Place a cardboard pattern on top and trace it along the outline. For light fabric We use a simple pencil, for dark - light. It is better not to use chalk, as it creates a wide outline that can distort the pattern.

You need to cut out the parts of the toy not along the contour (except in special cases), but slightly backing away from the edge to leave room for the seams.

The fairytale rabbit, being a cartoon character, is loved by many children. Every child dreams of having such a toy friend to spend time with and fall asleep in the same bed. You can make your child’s dream come true not only by buying a toy, but also by making it yourself. Moreover, the creation of mother’s hands will be more loved and more expensive than store-bought. In order to create beautiful toy, you will need very few things: just a couple of pieces of fabric, a rabbit pattern and a little imagination.

Best friend

A soft and cute rabbit toy can become best friend for any child. To do this, the craft needs to be made as cute and functional as possible, that is, do not use fragile and small decorations to decorate it. It is best to choose for tailoring and decoration natural fabrics or fur. When using fur material (especially natural), you should make sure that the child does not have allergies.

The size of the future craft may be different, depending on the age of the baby. But many needlewomen advise not to do too much big toys so that you can quickly wash and dry them. Also, you don’t need to sew a very small rabbit, because your child will get tired of it very quickly. Therefore it is best to choose the average size, approximately twenty to thirty-five centimeters. Regarding clothes fairy tale hero, then it must correspond to the gender of the child, because not every boy will like a rabbit in a dress. But for girls there are no restrictions.

Toy style

Among the huge number of toy styles, Tilda crafts are especially popular. The creator of this trend, Toni Finnanger, was able to embody the simplicity of forms and elegant splendor of fabric dolls in her crafts. Having received worldwide recognition for their sophistication, all products under the Tilda brand are the favorite toys of many children. One of the features of such toys is considered Long hands and legs, as well as a minimal image of the outline of the face. The needlewoman’s collection also includes rabbits. The charming Tilda rabbit, the pattern of which is placed below, is the most favorite exhibit of many people among all the artist’s crafts.

When cutting out parts of a toy from fabric, you need to take into account the fact that the pattern is shown without seam allowance, so you should make a small indentation from the edges of about 1-1.5 cm. If you do not do this, you will end up with too narrow parts that can ruin appearance crafts.

Also, the Tilda rabbit (the pattern of which is included in the article) is drawn on a small scale, which can be enlarged if desired. As a filler, you can choose padding polyester, holofiber or padding polyester. As for the design of the face, you need to sew two small beads in the area where the eyes are located, and embroider the nose with a triangle using embroidery threads. You will also need to lightly brown the rabbit's cheeks using blush. You should also pay attention to the fact that the ears of a fashionable rabbit can be sewn differently. In one case, they are cut out of one material, and in the other, fabric of two colors is used. As a rule, the inside of the ears in this case should be made of multi-colored linen or cotton.

Fluffy gift

A rabbit made of fur looks no less charming and cute than a fabric one. To create such splendor, it is best to choose short-haired fur that will not fall off. The toy can be sewn in several ways, using a combination of materials and making it completely fur. In the first case, they cut out the head of the craft from some soft fabric, and all other parts are made of fur. This version of the toy rabbit looks very beautiful and original. Below is a pattern of a rabbit made of fur, which is suitable for sewing both types of crafts.

Speaking about the design of a rabbit's face, it should be mentioned that on a completely fur toy you need to make very expressive eyes. Most often they use special ones that look like real ones. Making them yourself is very difficult, so you need to use purchased parts. As for the combined crafts, they look equally charming different eyes. They can be purchased, embroidered, or made from beads and buttons.

Long-eared surprise

Between everyone toy rabbits There are few differences, most often it is different kinds the material taken for sewing, as well as the shape of their ears. This product self made may have ears middle length, erect ears, as well as very long ears, which sometimes reach the height of the craft. Below is a pattern for a rabbit with long ears that any child will surely love.

The toy shown on the pattern can be sewn from various materials. Therefore, it may look like Tilda crafts or like the above fur option. In any case, the rabbit toy will turn out very beautiful. Sometimes soft wires are inserted into the ears of such products to make it possible to lift them. But most often, long-eared rabbits are made with flowing and soft ears.

Required scale

Very often it turns out that the rabbit pattern shown in the picture does not fit in size. Sometimes you want to make a toy bigger, and sometimes smaller. In this case, you should resort to zooming in or out. This is not difficult to do, you need to take a ready-made image of the parts, and if you need to enlarge them, then add a few centimeters along the edges of the product. If you need to reduce it, then you need to measure the pattern data with a ruler and draw it taking into account the changes, subtracting a few centimeters from the edges.

When making such changes to the toy, it is necessary to take into account that the rabbit pattern is given taking into account the proportions of the craft’s body. Therefore, you do not need to draw images by eye without having certain skills. It is best to follow the recommendations of specialists as stated above. If it is difficult to make a correct pattern on a regular landscape sheet, then you should use a sheet from a checkered notebook or special paper designed for this purpose. It will be much easier to draw details on it and make various curves correctly.

Unusual padding

As a rule, the same materials are used to stuff toys: padding polyester, synthetic padding or holofiber, as mentioned above. But sometimes other fillers are used to make the craft more durable. Most often these are various grains that can be pleasantly felt through the fabric. Being completely natural, such ingredients will not harm a playing child.

When using natural fillers, you need to take into account the fact that cereals are heavier than synthetic fillers. Therefore, the rabbit pattern and the material for sewing it must be chosen taking this nuance into account. It should also be remembered that before using any cereal, it must be thoroughly fried so that it does not spoil inside the craft. Although this method of filling products is completely natural, it has one big drawback - the inability to wash the toy. Therefore, it is most often used for crafts that are used as indoor decoration.