All children love new toys. Many girls adore their dolls; they not only enjoy playing with them, but also dressing them up. To some delusional and pears are offered entire collections of miniature clothing: dresses, blouses, boots, scarves, hats and much more. But this usually costs a lot of money. Therefore, many mothers try to help their daughter make clothes for dolls on her own. We propose to make a miniature hat from threads that will suit both a doll and a small plush toy. The labor costs and materials used are very small, and the child will be delighted with the result. He talks about how to make a small hat out of threads. step-by-step master class in the description and photographs.
To make this miniature craft, we will prepare:
Knitting;
Cardboard sleeve;
Scissors;
Double-sided tape;
A small finished pompom.
Let's start making our own hat from threads for a toy by cutting off a small ring from a cardboard sleeve (its height is about 1.5 cm). This ring will be the frame of our hat. It can be replaced with a simple strip of cardboard secured in a ring with tape.
After this, you need to cut pieces of the required length (about 30 cm) from the skein of thread.
We will need a lot of such segments. It is from these that we will make a hat.
Now let's start creating the hat. To do this, insert one piece of thread into a cardboard ring as follows.
After this, we thread one end through the resulting loop.
We tighten it. So we secured the first thread on our cardboard blank.
We fix the next thread tightly to the previous one.
In this way we continue to work, securing the threads to the cardboard ring.
We need to make sure that the entire cardboard blank is covered with threads.
Now we tie up the upper part of our hat with a small piece of thread.
Cut off the excess ends.
Turn the protruding part over to the other side.
Attach to the finished white pompom small piece double-sided tape.
Glue the pompom to the top of our craft.
Our little thread hat is ready.
Such a miniature headdress can be made in any color scheme. If desired, you can make a two-color hat if you alternate threads of different colors
Hello, dear readers! As we approach New Year's holidays Many people are starting to think about home decor, in particular decorating the Christmas tree. We have already told you how to make the most various decorations for a green spiky beauty, but today we’ll tell you how to make a hat from threads for a Christmas tree. At first glance, this element seems to be knitted, but in fact, everything is far from it! All the secrets of creating such an incredibly cute cap pendant will be revealed later in the review.
This is the kind of hat we will end up with.
Thread hat: master class.
To work you will need:
- Paper towel roll or toilet paper.
- Scissors and stationery knife.
- Threads (floss or yarn).
Stages of creating a hat.
Take the bushing from paper towel(we used a sleeve from a roll of foil), use a stationery knife to cut it into rings 8-10 mm wide. Accordingly, how many hats you want to get in the end, so many rings should be prepared.
We cut the threads into pieces 15 cm long. It’s difficult to predict their total number at this stage, so don’t cut too much; if there’s not enough, you’ll cut more.
Take the first thread and fold it in half.
In this folded form, we pass the thread through the ring from the sleeve.
Then we thread the two free ends through the loop.
Tighten the thread.
We create a similar loop nearby and also tighten the thread. We move this thread tightly to the previous one.
According to the above scheme, we cover the entire ring with loops of thread.
And you pass them all together through the ring, as if turning them inside out.
Align all the threads with your fingers - place them in a column up.
We cut a thread about 15 cm long, fold it in half, and wrap it around all the upper threads, stepping back from the edge a little more than 1 cm (adjust as you wish). Tighten the loop, draw the loose ends around, and tie it into a knot. We cut off the excess threads with scissors.
We lay the hat on the table, smooth out the protruding ends, and cut it in a semicircle. If the pompom seems long, cut it some more.
Below the pompom we tie a string to the pendant.
And here is the result!
A hat made of threads on a Christmas tree will look simply magical; your guests will not even guess that this product is not knitted at all! They make such cute things New Year's decor more comfortable, warm and homely! Be sure to make such wonderful mini-hats, you will be very pleased with the result.
And we continue active preparations for the upcoming favorite holiday, the New Year! And this time we bring to your attention the original version. New Year's toys on the Christmas tree in the form of a winter cap.
Do these Christmas decorations It’s very simple to make with your own hands, and besides, you don’t need any supernatural materials to make them.
Thread hat
DIY Christmas tree toy Hat
To create a New Year's toy, Thread Hat, you will need the following materials: Knitting thread bright colors, cardboard toilet paper roll, scissors.
Cut a piece about 2 cm wide from the cardboard tube. Now cut the threads into pieces of about 16 cm and start tying them on a cardboard strip (see photo). The more pieces of thread you tie, the more voluminous and neat the Christmas tree toy will look.
You can use threads of the same color or opposite threads different colors and textures, thereby creating different patterns.
Now gather all the threads together and thread them inside, as if turning them inside out. Tie the threads at the top so that there are threads left to create a fluffy pompom.
Place a little cotton wool or a piece of padding polyester inside the hat so that the hat holds its shape.
Use scissors to trim the pompom.
Now tie a loop to the finished hat and hang it on the Christmas tree.
These thread hats can be used to decorate not only Christmas tree, but also Greeting Cards, gifts, clothing and accessories.
You can also make a hat without a pompom. To do this, tie the threads before turning the cap inside out.
As an option, a miniature hat made of threads can be decorated with a pompom made from other materials. For example, it could be a piece of cotton wool, a foam ball, large beads, buttons, etc.
Hello, dear readers! As the New Year holidays approach, many begin to think about home decor, in particular decorating the Christmas tree. Earlier we already told you how to make a wide variety of decorations for the green spiky beauty, but today we will tell you how to make a hat from threads for a Christmas tree. At first glance, this element seems to be knitted, but in fact, everything is far from it! All the secrets of creating such an incredibly cute cap pendant will be revealed later in the review.
This is the kind of hat we will end up with.
Thread hat: master class.
To work you will need:
- A roll of paper towels or toilet paper.
- Scissors and stationery knife.
- Threads (floss or yarn).
Stages of creating a hat.
We take a paper towel roll (we used a foil roll) and use a utility knife to cut it into rings 8-10 mm wide. Accordingly, how many hats you want to get in the end, so many rings should be prepared.
We cut the threads into pieces 15 cm long. It’s difficult to predict their total number at this stage, so don’t cut too much; if there’s not enough, you’ll cut more.
Take the first thread and fold it in half.
In this folded form, we pass the thread through the ring from the sleeve.
Then we thread the two free ends through the loop.
Tighten the thread.
We create a similar loop nearby and also tighten the thread. We move this thread tightly to the previous one.
According to the above scheme, we cover the entire ring with loops of thread.
This is what you should get:
And you pass them all together through the ring, as if turning them inside out.
Align all the threads with your fingers - place them in a column up.
We cut a thread about 15 cm long, fold it in half, and wrap it around all the upper threads, stepping back from the edge a little more than 1 cm (adjust as you wish). Tighten the loop, draw the loose ends around, and tie it into a knot. We cut off the excess threads with scissors.
We lay the hat on the table, smooth out the protruding ends, and cut it in a semicircle. If the pompom seems long, cut it some more.
Below the pompom we tie a string to the pendant.
And here is the result!
A hat made of threads on a Christmas tree will look simply magical; your guests will not even guess that this product is not knitted at all! Such cute little things make New Year's decor more cozy, warm and homey! Be sure to make such wonderful mini-hats, you will be very pleased with the result.
Pompom is a very unusual accessory. It is often used to decorate hats, scarves and even curtains or lampshades. The history of the use of pompoms takes us back to the times of the tsarist army, when the uniform of a soldier and an officer could be distinguished precisely by the color of the pompom.
And for French sailors, the pom-pom even served as some kind of protection against head impacts while rocking on a ship.
Today, pompoms are back in fashion, so the question of how to make a pompom for a hat is very relevant. Especially It's nice to make it yourself, because it’s quite simple. In addition, modern handmade art allows you to choose absolutely different types yarn, combine different colors and use the most intricate accessories.
Of course, a cheerful accessory in the form of a soft round ball is more suitable for decorating a child’s hat. But adults are also often attracted to cozy hats with cute pom-poms made from soft and warm yarn. Next awaits you detailed master class, from which you will learn how to make a pompom for a hat and express your imagination to the fullest.
To make a pompom you can use absolutely different types of yarn:
Synthetic;
Melange;
Woolen.
Also, prepare in advance:
- sheet of cardboard, A4 size,
- simple pencil,
- scissors
- and a compass or round utensil for the template.
And now we invite you to look at the photo, and also read the instructions that will help you make a pom-pom from threads with your own hands.
1. First you need to decide what size your pompom will be. It all depends on how thick the thread you use. Pompom from fine yarn looks more elegant, resembling a small fluffy ball. Thick threads also have their advantage, because with their help you can create very original pom-poms, spending very little time and material on it. Beginners are usually asked to make a pompom from threads of thicker weave.
2. Let's start making the pattern. Take a sheet of cardboard and draw 2 circles on it. Their radius will be equal to the radius of your future pompom. In the middle of one of the circles, draw a circle, half the diameter, and cut it out. Attach this circle to the second large circle and cut a hole. Thus, you should end up with 2 circles with through holes in the middle. Something like two cardboard bagels.
3. Now we will wrap our circles with threads. To make it convenient for you to do this, prepare a small ball of yarn that will fit freely into the hole in the cardboard blank. Place 2 cardboard “donuts” together and begin wrapping them with thread. Take your time, follow the following technology: methodically insert the ball into the hole, gradually wrapping the edges of the circle with threads. Make sure that the threads fit tightly to each other. Place several layers of yarn around the circumference, adding new balls. This way your future pompom will look dense and fluffy. You can also use different colored threads to give your pompom a unique color.
4. After you have finished wrapping your cardboard blanks, cut the threads with scissors in the place where they close the circles together. Do this carefully, holding the fibers of the yarn. It is best to place the pattern on the table. Prepare a long piece of thread, it will serve you to fasten the pompom.
5. Move the patterns a short distance apart and stretch the thread between them. Tie the thread into a knot exactly in the middle, trying to evenly distribute all the fibers.
6. Remove the cardboards after making a cut in the center. To ensure your pom pom holds tightly, wrap the thread around the middle a few more times and tie.
7. Thread a needle with a large eye into the remaining end of the thread and sew several stitches in the middle. Straighten the threads on the pompom using scissors. Your accessory is ready and now you can safely sew it on a hat or scarf.
How to make a pompom for a fur hat?
In addition to the usual pom-pom from yarn, you can make a pom-pom for a fur hat. Such an accessory will look very elegant and luxurious. In addition, it will be much easier for you to choose what to wear with a fur pompom hat. After all, it is perfect for a fur coat, a winter coat, and a down jacket.
Before you start making a fur pompom, watch the detailed video, as well as prepare everything necessary tools and materials:
Shreds of natural or faux fur;
Scissors or stationery knife;
Threads, needle;
Sintepon for filling;
Tape for fastening the product.
- Using a stationery knife, carefully cut out a circle from the fur. This must be done from the wrong side.
- Here we sew in a circle with large stitches, trying not to catch the fur.
- We measure out the required amount of padding polyester and tie it with tape.
- We put the filling in, pull the fur together, and tie the ribbon in a strong knot.
- We tighten the pom-pom even more tightly with the help of threads that we used to process the wrong edge of the fur and tie them in a knot.
- The pompom is ready, wear it for your health.
Video tutorials: how to make a pompom for a hat from yarn?
