How to weave snowflakes from elastic bands for the New Year holidays. Do-it-yourself snowflake from rubber bands How to weave a snowflake from rubber bands

On the eve of the New Year, snowflakes, snowmen, Christmas trees and everything related to this become relevant topics for weaving. wonderful holiday. In this article, we will learn how to weave a snowflake out of rubber bands.

Instructions for weaving snowflakes on the machine

The color of the rubber bands can be selected at your discretion. In our example, frosty beauties will be blue and white. For weaving, six columns of the machine will be involved. First you need to weave each ray separately, and then combine them into a full-fledged snowflake.

We take an elastic band white color and wrap around the hook four times. We stretch the blue rubber band through the white one. It turned out a kind of eight, wrapped in the middle. We pull both edges of the blue iris onto the second pegs. Now we stretch it along both edges of the machine from the second to the first and third columns. This is the first layer of weaving.

On the first and third pegs with a figure eight, we put on a white elastic band. They form the second layer. We drop the irises of the first layer from the first and third columns inward. Further weaving continues with blue rubber bands. The sequence is similar to the previous step. We throw the next layer with a figure eight on the first and third columns and throw off the previous layer of weaving inward.

On the second pegs we stretch a blue rubber band. We do the same for the bottom row. We put snow-white elastic bands on the first and third columns. The bottom row must be removed through the outside towards the center.

Now, in order to complete the weaving of the first ray of the snowflake, you just need to transfer all the rubber bands from the right row of the machine to its left row. The first element can be set aside to free up the machine for the next.

The total number of rays in a snowflake is five. When they are woven, you can begin to complete our product. We take two white irises and throw the components on them. Their ends must be connected with a loop. Weaving completed.
The scheme is quite simple, so even an inexperienced craftswoman will figure out how to weave a snowflake out of rubber bands. Experiment with colors, use rubber bands that glow in the dark. Such products can even be used as decorations for the Christmas tree.
Snowflake according to a different weaving pattern.
We take the iris and wrap it four times around the column of the machine. Then we connect this column with the neighboring two more irises. Repeat these steps two more times. Thus, we have six columns with a similar pattern. On each pair we make eights, throwing the lower rubber band to the center. We remove the loops with a hook.

We use the hook to weave the ray to the desired length. We repeat the procedure five times so that the corresponding number of rays forms on the instrument. Using a hook, we thread two irises through the loops and tighten the knot so that the snow miracle does not crumble. We straighten the elements, the product is ready.

Weave a snowflake on a hook

Res. wind on the hook four times. Through it we pass the second. Repeating this step, weave three blanks. We throw three blanks for 1 cut. Got the first ray. Our snowflake will be five-pointed.

Five parts must be put on an elastic band. Just crochet it and pull it through all the free loops of the elements.

When they are connected into a single whole, you can tighten the knot so that our gift does not crumble.

Any snowflake can be presented as a keychain to your loved ones. Simply attach the loop to one beam and the keychain is ready.

Video: Lessons for weaving snowflakes from rubber bands

Comments

How to weave a snake from rubber bands using photo and video tutorials
How to weave a spider from elastic bands on a slingshot and a loom according to the photo of MK

Evgenia Smirnova

To send light into the depths of the human heart - this is the purpose of the artist

Content

Weaving from small silicone rubber bands is fascinating, interesting activity that captivated children, teenagers and adults. Many needlewomen are happy to create various bracelets, pendants, key rings, animal figurines from this multi-colored material. How to weave a snowflake from elastic bands, you will learn from the master classes and videos for beginners below.

These beautiful crafts are made both on the machine, and with the help of a hook, on fingers, on a slingshot. They can serve as a keychain, pendant for mobile phone, room decoration, New Year's toy.

Step-by-step instructions for weaving a snowflake from rubber bands on a loom

According to the below step by step master classes you will learn how to make a snowflake using different techniques and schemes. For work, you may need a hook and a loom. The last tool is an immovable platform with transparent plastic nozzles, on which elastic bands must be strung during the weaving process. You can choose the colors of the irises at your own discretion, products made of a material glowing in the dark look especially interesting. Prepare rubber bands with a margin and you can start.

New Year's snowflake on the machine

This step-by-step master class dedicated to weaving figurines from white and blue rubber bands. You can use this craft as a New Year's Christmas decorations or give as a gift to your loved ones, friends. Prepare the machine for work: remove one extreme row from it, position the tool so that the open sides of the peg look at you.

Weaving will be carried out on six columns. You can use any colors that are enough for your creative imagination. The figurine will be created separately according to the rays, which at the end you will connect together with one product. Here is a step by step guide:

We wind the white rubber band on the hook in four turns, throw the blue one over one edge, remove the first one in the center of the last one. We hook both ends of the blue iris to the second columns, as shown in the photo.
We stretch one edge of the blue rubber band, clinging to the first and third peg. We do the same with the other side.

We hook one white rubber band without twisting the figure eight to the first and third pair of pegs. From the left and right, we fold the bottom layer inward from the outside.
In the same sequence as in the previous step, we throw in blue rubber bands. Drop the bottom ones in.

We stretch the blue elastic band and cling to the second columns. We repeat this action with the lower irises of the same color.
We cling to the white rubber bands for the first and third ones, the blue one for the central pairs of pegs. Remove the bottom row to the center through the outside.

Next, you need to transfer the gum from the right row to the left. One ray is ready, we remove it, helping with our fingers and clinging to the hook.
We make five more rays according to the method described above.

We throw off all the rays on a pair of white rubber bands. We connect the ends of this pair, make a loop with a new iris. The product is ready.

Snowflake made of glow-in-the-dark rubber bands

In this master class, you will learn how to make a snowflake from irises. The use of a luminous material for manufacturing will help to make a product of stunning beauty. Install the machine so that the holes of the nozzles look in your direction. Use this instruction:

The first iris must be strung in four turns. Next, throw a pair without twisting.
We repeat the same pattern twice on the following columns.

The bottom layer, wound in four turns, is thrown off through the top to the center.
We remove all the loops on the hook. We shift them to a new pair of irises, this will be the tip of the ray.

Weave the rest of the ray to the desired size.
Weave five more such rays.

We transfer all the rays to a pair of elastic bands. We connect both ends of this pair with one iris, form a loop, tighten. The thing is ready.

Video tutorials for beginners on weaving snowflakes without a machine

If you have just started taking your first steps in needlework with the Rainbow Loom creative kit and have not had time to get a special rainbow loom, do not despair. You can make a snowflake out of rubber bands without this tool, using a hook, fork tines. Experienced craftswomen advise using a knitting metal device, as it is more convenient to use. To learn how to create this craft, see how to make a snowflake out of rubber bands in the video below.

A clear and consistent demonstration of the process allows even beginners to learn. The weaving pattern of the product is very simple, but you need to be patient, carefully follow the video instruction. Before work, prepare a sufficient amount of rubber bands suitable colors so that nothing distracts you in the process of weaving this Christmas tree toy or decoration for the room.

Easy way to crochet

Christmas tree toy snowflake made of small rubber bands

Multi-colored snowflakes without a machine

Did you find an error in the text? Select it, press Ctrl + Enter and we'll fix it!

Weaving from colored rubber bands is actively developing as a new art direction. Now needlewomen weave not only jewelry, but also various toys.Volumetric rubber figures are durable and beautiful, so they can be used for interior decoration. Adults and children enjoy weaving from Rainbow Loom elastic bands, try to weave something too. In this article, you will learn how to weave a snowflake from rubber bands, offer detailed master class with photos and videos.

How to weave a snowflake from rubber bands video

To weave volumetric snowflake from elastic bands on a hook, you will need Rainbow Loom rubber bands, either one color or two colors. First you will need to take one rubber band and wrap it around the hook four times. After that, take another elastic band and thread it through the wound one so that all the loops are on it. The free part of this elastic band needs to be put on a hook.

You need to make three identical blanks. Then take another rubber band and start removing these blanks on it. Just as before, the free part of the gum must be put on the hook. The worn loops must be removed again on another elastic band and its ends put on the hook again. This will be the first ray of the snowflake, so for now you can take this blank off the hook. By the same principle, you will need to prepare five parts for five snowflake rays.

When all the details are ready, put them on the hook, take a new elastic band and thread it through the details.

Watch the video: Snowflake from Rainbow Loom Bands WITHOUT A MACHINE

Guided by the principle “Prepare the sled in the summer”, I have already prepared photo and video master classes for you “ How to weave a snowflake out of rubber bands«!

Since the colors of winter are white and blue, so are the snowflakes in white, blue and blue colors will be the most relevant. However, no one forbids weaving snowflakes of any other color and even multi-colored ones.

Such snowflakes will be a wonderful decoration during winter holidays and on the Christmas tree, and for the house, and for the class. It's also a great idea for a New Year's souvenir for family and friends!

To weave a snowflake out of elastic bands you will need:

105 elastic bands of a suitable color;
hook for weaving or knitting (No. 4).

How to weave a snowflake out of rubber bands?

Weaving a snowflake is done using a hook from a set, it is better if it is metal, not plastic. You can also use a regular crochet hook. Hook number 4 is perfect.

Screw the elastic onto the hook, making 4 turns.

Then hook two rubber bands on the hook and pull it off, putting it on the ring or middle finger of the left hand. The tension of the rubber bands is necessary so that they do not come off the hook.