You always want a holiday and always want to spend the New Year in a special way, and a cozy and warm atmosphere will help this. For example, you can decorate your house or apartment with a Christmas tree made with beads yourself. It will shine during the day and will be a table decoration on holiday. We will conduct a master class on creating a Christmas tree from small beads right now!

Here are some examples of patterns for weaving a beaded Christmas tree:

Master class on creating a Christmas tree from beads with your own hands

This is one way to do it christmas tree for beginners.

We will need the following materials:

• Drill.
• A metal rod about 0.5 centimeters and 20 long.
• Wooden base.
• Nippers or scissors.
• Thin wire.
• Green beads.

Now let's take a closer look at the manufacturing process.

1. First you need to create the base. To do this, take a wooden square and make a hole there using a drill. Next, hammer the rod into the hole. The basis for the future Christmas tree is ready.
2. In the next step, we will begin making branches. First, we collect 5 beads on a piece of wire measuring 20 centimeters. Then we pass one end of the wire through four beads, so that the fifth bead is in the loop. This can be seen in the diagram for beginners.
3. Divide the wire into two equal ends. Let's do the same on each of them. We collect five beads and thread the free end through four beads. Let's do this procedure at both ends. It is necessary to twist them a little by a few millimeters. Then we'll repeat everything.
4. We independently determine the length of the branches. It all depends on your desires. Next, twist the ends of the wire so that 1.5 centimeters remain without beads. Then we attach them to a metal rod. Accordingly, the further from the top of the tree, the longer the branches need to be created and vice versa. How large quantity twigs, the more magnificent the Christmas tree.

General recommendations for making a Christmas tree:

• When choosing beads, you need to pay attention to shining options, because bright beads not very suitable for this.
• If you want to create a Christmas tree with snow, then it is good to make the first three spines from snow-white beads, and the rest of the branch from green. This Christmas tree will be more elegant.
• You can experiment a little with color scheme for beautiful variations. You can make a pink, red or blue Christmas tree.
• You can even make Santa Claus and Snow Maiden using beads. Small toys are not needed here, because the Christmas tree is already quite elegant.

A Christmas tree created independently can be installed on a table, corner or mantelpiece, in an office, on a dressing table, or on a console or shelf.

Let's consider the second version of the Christmas tree with a description of the work

We always want a Christmas tree to make us happy at home. Growing coniferous trees in a room is, of course, difficult, but making a Christmas tree from beads is absolutely possible. Therefore, I propose to make your own Christmas tree according to the scheme for beginners.

Before you begin, you need to prepare the following materials:

• Small green beads.
• Green glass beads.
• Twelve meter wire.
• Pebbles, Christmas decorations glass beads, sand.

Cut two pieces from the wire by meter, fold them in half and roll up any ends that are laid together.

We will thread the four ends through the bead. Now we will collect five glass beads on each end of the wire.

Then, on either end of the wire we collect two bugles and one bead as in the figure above.

When you have made the required number of these branches, roll them together every centimeter. The base of the wire needs to be strengthened.

1. The classic way is to fill the mold with alabaster and decorate the top with small Christmas tree branches made of beads and bugles.
2. The ends of the wires can be attached to a pebble.
3. You can use plasticine as a base for crafts.

Another idea for home decoration using beading technique

To create a Christmas tree we will need brown and green beads, two large beads, and brown copper wire. This Christmas tree consists of ten tiers. When creating it, we will be guided by the diagram.

1. Cut a piece of wire 45 centimeters long. Place a golden bead in the center. We will pass the two ends of the wire through two beads and a green bead. We string four green beads on both sides of the wire.
2. Twist the wire four turns, string the beads according to the pattern on each side and twist the loops.
3. We secure the ends with two turns and also create two more loops.
4. Take four pieces of wire 25 centimeters each, twist four branches with three loops on each and wrap the wire three turns.
5. For the next third row, take four wires of 30 centimeters each and create five loops in the same way as in the first tier.
6. To create the fourth tier, eight 30-centimeter wires are needed. We twist two branches together.
7. From four pieces of wire 35 centimeters each we create a fifth tier, seven loops per branch.
8. We create the sixth tier in the same way as the fourth. We collect two branches at a time, cutting off another 20 centimeters of wire. First, we create 12 curls on one branch, then attach the second branch with 15 turns.
9. To create the seventh tier, we will cut four wires of 60 centimeters each. We make the first loop in the center of the wire, then string six loops around it using one end of the wire. We also make seven loops on the second side.
10. For the eighth tier, you need four pieces of wire of 30 centimeters each and four of 60 centimeters each. We make branches from the long ones, as for the seventh tier, and string five loops on small sections. We attach a small one with 15 turns to a large branch.
11. We create the ninth tier as well, but there should only be 18 turns.
12. For the 10th tier, we will take four wires of 70 centimeters each and 4 of 35 centimeters each. We make nine loops on a large branch and seven on a small one.
13. Using wire, we assemble all the prepared tiers and wrap it in a spiral.
14. We place the Christmas tree for delivery.

Continuing to talk about different trees beads, this master class with step-by-step photographs and detailed descriptions will teach you how to make wonderful miniature trees with your own hands from beads and wire. New Year is just around the corner, so we will make a Christmas tree.

1. Christmas tree from cutting

For the manufacture of with your own hands one beaded Christmas tree You will need:

• green cutting- 50 gr.
• brown cutting- about 5g.
• wire Brown(or copper) about 50m
• alabaster
• colored pebbles(or other decor)
• two beads under pearls
• bugles
• stand

The Christmas tree consists of 10 tiers. Each tier has four branches.

Begin weave a Christmas tree from the top of the head. We cut a wire 45 cm long. You need to string it on the middle of the wire bead golden color and group made of white glass beads, gold and silver beads, 1 green cut bead. Pass the second end of the wire through the entire group. At each end of the wire, dial 4 green beads:

After this, you need to twist both ends of the wire together 3-4 turns. At each end of the wire, collect 4 green beads, 2 brown, 4 green, twist into eyelets.

Twist the ends of the wire 2 turns and make two more turns. eyelets, as shown in the following photo:

Let's move on to manufacturing with your own hands second tier beaded Christmas trees. Cut 4 pieces of wire 25 cm long. Make 4 of them twigs three each eyelets with a set: 3 green beads, 2 brown, 3 green.

Twist the wire 4-5 turns from loop to loop, 3 turns from the last loop.

Let's start manufacturing twigs For third tier woven DIY Christmas trees. To do this, from 4 pieces of wire 30 cm long we make 4 twigs 5 each eyelet. The first three loops, as on the branch from the second tier, in the next two loops, instead of three green ones, cast on 4:

As you understand, you need to weave 4 of these twigs, as in the photo above. After this, we prepare twigs for fourth tier beaded Christmas tree. To do this you will need 8 pieces of wire 30cm long. Need to do 8 branches five each eyelet in each:

The first three loops, as can be clearly seen in the photograph, are the same as in a branch from the second tier, in the next two loops dial 6 green beads. After the last loop, twist the wire down 4-5 turns. Of the two collect one twig, screwing them with a spiral 3-4 turns:

5 tier: from 4 pieces of wire 35 cm long, make 4 twigs 7 each eyelet. The first three loops, as on the branch from the second tier, in the next four loops, cast on only 6 green beads.

6th tier Christmas tree: we start it in the same way as the 4th tier (8 pieces of wire, 8 branches of five loops each) But we collect the branches in pairs a little differently. Need to cut off an extra piece wire 20 cm long. From the last loop, wind 12 turns in a spiral with additional wire. Then screw the second branch 15 turns using a spiral:

Twigs for 7 tiers beaded Christmas trees: cut 4 pieces of wire 60 cm long. Make it on middle of the wire first loop. Next, cast on 6 more loops, as on the 6th tier, on the same end of the wire so that the other end remains long.

After the last loop, twist it by 6-7 turns. On another ( long) the end of the wire also make 7 eyelet:

Twist with additional wire a twig spiral down by 8 rpm.

8th tier: cut 4 pieces wire 60 cm long and 4 pieces of 30 cm each. Twist branches from 60 cm wire, as for tier 7, from 30 cm wire - branches with five loops:

From these two branches, collect one, screwing them into a spiral. First put the spiral on twig with two ends - 15 turns, then screw a small branch with 15 turns:

9th tier: same as for tier 8, only quantity turns of wire increase from 15 to 18.

10th tier: cut 4 pieces of wire 70 cm each, 4 pieces 35 cm each. Make twigs according to the same scheme as for tiers 8 and 9. Only in big branch cast on 8 and 9 loops, in the small one - 7. Quantity turns spirals increases to 22.

Now twigs for all tiers of our beaded wood ready, we can start wood assembly.

Take extra wire(do not cut from the coil!) and, starting from the top, wrap the ends of the wire down.

Additional kernel will not be required, because due to the number of tiers (and branches in each of them), the trunk thickens and does not bend.

Distance between tiers from 0.8 cm (from the top) to 1.2 cm (to the bottom).

After assembly it remains plant a Christmas tree in a stand. To do this, you need to dilute alabaster and stick it into it Christmas tree, wait until the alabaster dries. Then using clear glue decorate frozen alabaster soil with colored pebbles, moss, cotton wool with glitter, beads.

Here's our result green beauty, it even seems to be in the air festive aroma of pine needles:

Maybe you would like to create with your own hands Not only green Christmas tree, but also her snow-white girlfriend?

Christmas tree can be made not only from beads or felling, but also from bugles. Besides, Christmas tree it is possible dress up:

Christmas tree made of beads will bring festive atmosphere even to yours workplace on the office desk, will decorate your home and serve as an excellent a gift made with soul with your own hands!

2. Christmas beaded

You will need: beads 0/9

z = green - about 42 grams;

w = yellow - 36 pieces;

b = white - about 3 grams;

c = silver - 24 pieces;

cв = beads of luminous colors for jewelry 32x10 pieces;

BB = brown wire for flowers 0.3 mm;

BD = 40 cm wire for 1 mm stems.

Scheme:

Description of work:

Stars (Figure 1 of the pattern): String 4c (4 silver beads) down the middle of a piece of 60cm long brown wire (BB), and thread the wire back through the 3c, passing the first bead.

Thread 4c onto one end of the wire, move them as close to the first row as possible and thread the wire back through 3c, passing the first (1h) bead. Repeat this procedure until you have 6 rows. Form them into a star (see Figure 2 of the diagram).

Treetop: Work in accordance with Figure 2 of the diagram. Barrel: Thread both ends of the wire together through 8z (8 green beads).

Side branch: At each end of the wire, make two branches as follows: string 5z onto the wire and thread the wire in the opposite direction through 4z, passing one bead (1z).

Barrel: Pass both ends of the wire together through 7z.

Side branches with candles: At each end of the wire, make two branches as follows: string 7z, passing one bead (1z), thread the wire in the opposite direction through 1z.

Candle: string 3b (3 white beads) + 1e (1 yellow bead), passing one yellow bead (1e), thread the wire in the opposite direction, first through 3b, then through 5z.

Base: Bend the wire for the barrel in half. Wrap both ends of the wire around the base.

Using Basic Technique II, make 64 Christmas tree branches. Each branch should have a decoration or a candle (in half). Make a candle or decoration after you have made the first “leaf” of the branch along with the neck (see diagram, place marked with an asterisk.) Before assembling the tree, first make all the branches.

Example: To make 1 branch with 4 “leaves” and decoration: 1: String 5z in the middle of a 20 cm BB, twist the ends of the wire together into a “Neck” about 5 mm long

2: For decoration: String 10 strings on a wire, move the beads to the “Neck” itself, form a ring (to do this, thread the wire through the first stringed bead - 1 string). Twist both ends of the wire a couple of times.

3: String 5z on one of the ends of the wire, move them 5 mm from the first “Neck”, bend the wire and twist 5 mm in the direction of the made Decoration and the first “Neck”.

4: Twist both ends of the wire together into a "Rib" about 5mm long.

5: Place 5z on the second end of the wire, move them 5 mm from the “Rib”, bend the wire and twist 5 mm in the direction of the “Rib”. Repeat step 5 with the other end of the wire.

According to the following table, make all the branches of the Christmas tree. Be very precise: uniform appearance tree depends on the length of individual branches:

Assembly: Attach the branches floor by floor to the base. In this case, fix the branches corresponding to one letter (row in the table) at the same level (“floor”):

starting just below the top, wrap the base with brown floral wire (BB) from top to bottom 1.5 cm.

Secure the branches of group A at the same height around the base using BB (1.5 cm).

Secure the branches of group B at the same height around the base using BB (1.5 cm).

Continue until all groups of branches are secured to the base. Under the last group of branches, wrap the base with 2cm of brown floral wire (BB).

Secure the finished tree in a small flower pot with clay (ohm).

Source: http://jvolodina.freevar.com

3. Christmas tree “Wishes Come True”

Materials: 150 grams of green beads and some gold beads, 0.3mm wire, reinforced threads, 2mm hard wire.

The Christmas tree consists of a crown and 11 tiers of branches.

The main element of the Christmas tree is this trefoil. There are 9 beads in each loop.

Top of the Christmas tree:

Make the following element from gold beads: a central loop 4 cm long, 3 side loops of 15 beads each. Twist all the loops.

Rows 1,2,3,4 are performed the same way. Wrap 2 shamrocks in each row onto the base with gold loops.

Row 5: attach 3 trefoils.

The tops of each branch (cones) are the same and are made of gold beads. Make 3 loops of 9 beads.

Tiers 1 and 2 are performed the same way. Each tier has 3 branches.

Wrap 2 rows of shamrocks to the top of the head (2 shamrocks in each row).

Tiers 3 and 4 are performed the same way. Each tier has 3 branches.

Wrap 3 rows of shamrocks to the top of the head (2 shamrocks in each row).

Tiers 5 and 6 are performed in the same way. Each tier has 4 branches.

Wrap 4 rows of shamrocks to the top of the head (2 shamrocks in each row).

Tiers 7 and 8 are performed in the same way. Each tier has 4 branches.

Wrap 5 rows of shamrocks to the top of the head (2 shamrocks in each row).

9th tier. Complete 6 branches. Wrap 6 rows of shamrocks to the top of the head (2 shamrocks in each row).

10th tier. Complete 5 branches shown in the photo. To do this, first make 10 branches, 4 rows of trefoils in each. Then connect the branches in pairs and wrap 3 more rows of shamrocks (each row has 2 shamrocks).

11th tier. Complete 5 branches shown in the photo. To do this, first make 15 branches, 4 rows of trefoils in each. Then connect the branches 2 at a time and wrap 1 row of shamrocks, wrap another branch and 2 rows of shamrocks (there are 2 shamrocks in each row).

Christmas tree assembly

Attach the tiers of the tree to the top of the head one by one. The distance between the tiers is from 1 - 2.5 cm. Use any brown threads; for this Christmas tree, reinforced threads were used for sewing in 4 folds.

The distance between the rows of trefoils is 0.5 cm.

The distance from the last row of shamrocks to the tree trunk is 1 cm.

In order for the tree to gradually expand downwards in repeating rows (these are 2.4.6.8 rows), increase the distance to the trunk to 1.5 cm.

For a more durable structure of the tree (this is necessary, because the tree is very heavy), insert a strong wire into the trunk at the level of the 4th row. For this tree, 4 strands of wire were used, which were subsequently bent as supports.

Planting a Christmas tree

Plant the Christmas tree in a solution of plaster and PVA or tile adhesive. Prepare the soil.

Christmas tree made of beads is an excellent New Year's craft that is created to decorate the interior during winter holidays. If you have not yet mastered all the intricacies of beadwork, then do not worry - we will tell you how to create the simplest New Year's tree. But, of course, even experienced craftswomen will find something interesting for themselves in our selection.

Beaded Christmas tree for beginners - master class

If you don’t know how to weave beads, you can still please yourself and your household a wonderful craft. The principle of making such a New Year's tree is extremely simple, but the result is a rather spectacular New Year's tree.
So, you need to take several ordinary sewing pins (you can buy them at a sewing store) and string several large beads on them. The material must not only have green color– it can be red, yellow or blue. The amount of material to be strung can be arbitrary, the most important thing is that one part of the pin is completely filled. Prepare 5 of these filled pins for the first tier of the tree and 8 pieces for the second.

Take a red ribbon (the toy will then be hung on it) and attach 5 pins to it, tighten it and form a triangle. In order to fix such a triangular position, you will need to use a decorative star - it will also be the main decoration for the upper part.

Take a small piece of wire and attach it to the bottom of the first pin of the first tier, then begin to form the second tier, gradually attaching the rest of the pins, alternating with large green beads. To make the bottom tier more voluminous, you should attach large green beads. So I'm ready beaded Christmas tree - beginners They can easily repeat this master class.

Christmas tree made of beads - master class

A coniferous tree with golden cones will become a real interior decoration on the eve of the winter holidays. To create a craft, you first need to weave a lot of blank legs, which consist of three loops. One loop should fit 9 beads. Weave also 60 pieces of gold cone blanks.

Now start shaping the crown. Weave an apical loop consisting of 15 pieces. bead, surround it with exactly the same loops in the amount of three pieces. Go down below and attach 8 greenish branches. As a result of your efforts, you have 4 tiers, all that remains is to attach 3 branches and the crown is ready.

Add 4 more pieces of strong wire to the free ends of the wire, which will serve as a base for the trunk and roots.

Take a golden cone blank and screw 4 greenish branches to it in pairs, then wrap it with thread. Make another five heels of the same blanks and screw them three in a row to the top of the head. For the next couple of rows, you should also make six branches, but each of them should have 6 green legs.

The next two rows should contain 4 branches of 8 legs. Then two rows - 4 branches of 10 legs. The next row is 6 branches of 12 legs, followed by a row of 5 double branches. They are made from 10 branches with 8 legs each. Twist the double branches in twos, wrap them in pairs at the junction and just below the 6 legs. Screw double branches to the trunk. The last row should contain 5 triple branches. Make 15 branches, as in the previous row, twist and fasten them in pairs, fix 2 legs at the junction. Screw on the third branch and complete the triple branch by adding 4 tabs. Attach the triple blanks to the trunk.

Do not forget that every time you attach the workpieces to the barrel, you need to tighten them tightly with thread.

IN beautiful flowerpot pour plaster and place it in it, securing the bent wire roots. Dry and then coat the surface of the plaster with glue - this will help secure the shiny decor.

Christmas tree made of beads - master class, photo

Hereby New Year's magic can be called creating a Christmas tree-candlestick. Just think how beautiful such a figurine will look on festive table! In addition, such beautiful souvenir Can be presented to family or friends.

Weaving should start from the top. To create the top needle, put 7 green and 2 white beads on a thin wire. Thread the end of the wire back from the white side, skipping the very first one. Tighten the beads and you can say that the top needle is ready.

Proceed to making the side ones: using the photo as a guide, string 4 green ones and 2 white ones. Pull them tightly to the base and again thread the end of the wire in reverse, excluding the first round piece. You have got the first side needle, using similar manipulations, pick up the second side one, then the third and fourth in turn - the result should be a cute twig.

Place 3 more beads on the barrel and repeat everything a couple more times to get 2 more circles of side needles - in the end you will get a top with an upper needle, as well as three side circles, with a gap of 3 beads on the barrel.

We can congratulate you - you have mastered the needle technique, using it, make 3 identical branches, consisting of an upper needle, as well as a number of side ones. They will need to be attached to the top, put on the side, tighten the beads on the barrel and twist the pieces of wire together, and you need to twist them tightly enough so that the barrel is cut hard and strong. Add a couple more “Christmas tree paws” in the same way.

Now it is necessary to make blanks for the 2nd and 3rd tiers - the principle of their manufacture will be no different from the top, only the side needles of the second row should be longer than the first row. Those. in the first row, collect 4 green and 2 white beads, and in the second row, 6 green and 2 white. Make 8 pieces of similar blanks. Attach the second and third tiers.

The blanks for the fourth tier will simply be one row longer, and for the fifth they will be exactly the same as for the fourth, only 2 of them should be made in total, and then connected in pairs. Now your wonderful one is ready, but now you need to worry about creating a decent stand.

In order not to stain the fluffy figurine, you need to wrap it in cling film or foil. Dilute the gypsum (or alabaster) to a thin sour cream using ordinary water (pour the gypsum into the water). Fill in suitable form diluted plaster. Twist the wire tail of the craft into a loop and quickly place it in the mass, also place a tea candle nearby.

Then comes the moment of decoration - the delivery itself can be painted in any color, decorated with beautiful rhinestones. Well now in New Year's Eve you can put a wonderful craft on the table, light a candle and enjoy the beauty.

Christmas tree made of beads – photo:

You will find many beaded Christmas tree patterns, be sure to use them in your work.

Christmas tree made of beads - step-by-step master class

Cutting beads are also perfect for needlework; this material will produce equally beautiful products.

So, the work will start with making the top. You need to cut a piece of wire 45 cm long (the wire should be copper or simply brown). String a golden bead into the middle of the piece, followed by a sequence of white bugles, gold and silver large beads, and green beads. Pass the second wire tip through this entire typed sequence. On each tip, collect 4 light green cuts.

Then twist both wire ends together 3-4 turns, add 4 green-2 brown-4 green cuts at each end, twist with loops. Twist the ends 2 turns, and then make 2 exactly the same loops again - you have the first tier.

Proceed to creating the second tier - for this you need to cut off 4 wire pieces, the length of each should be 25 cm. Transform them into 4 branches, each of which should contain 3 loops, which should be cast on like this: 3 green-2 brown-3 green . Twist the wire from loop to loop 4-5 turns, from the last loop 3 turns.

For the third tier you will need 4 wire pieces 30 cm long, you will get branches of 5 loops, the first 3 will be made as for the second tier, and in the next 3 green ones together you should make 4.

For the 4th tier you can’t do without 8 pieces of wire, their length will still be the same - 30 cm. Each branch will have 5 loops: do the first 3 in exactly the same way as for the second tier, in the next 2, dial 6 light-colored ones. green. Place these blanks in pairs, screwing them with a spiral 3-4 turns.

For the 5th tier, prepare 4 pieces of wire 35 cm long, i.e. you will get 4 blanks of 7 loops each. The last 4 should be different - collect only 6 pieces of green chop in them.

Start the 6th tier in exactly the same way as the fourth, but at the same time assemble the pieces together differently. Cut an additional piece of 20 cm. From the last loop, wind 12 turns in a spiral with this additional piece, then attach the second piece with 15 spiral turns.

7th tier: prepare 4 pieces of 60 cm each. Make the first loop in the middle of the wire, then make 6 more pieces, as on the sixth tier, while the second wire end should remain long. After the last loop, twist it 7 turns. Also twist 7 loops on the long tip. Using an additional piece of wire, twist the branch downwards in a spiral of 8 turns.

Beaded Christmas trees master photo on the 8th tier, he recommends taking 4 x 60 cm and 4 x 3° cm. The first ones will be used to make branches, as for the 7th tier, the last ones will be used for five-loop branches. Assemble one of the two blanks, screwing it with a 15-turn spiral.

For the 9th, repeat as for the eighth, only the number of turns should be 18.

For the 10th tier - 4 x 70 cm, 4 x 35 cm. A large branch should have 8 and 9 loops, a small one - 7, spiral turns - 22. Using the photo as a guide, assemble the tree.

Christmas tree made of beads with step by step photos ready, all that remains is to place it in the stand, make it and...

The process of creating beautiful things with your own hands brings a lot of pleasure. It is especially pleasant to work with beads. Multi-colored beads remind precious gems, a rich color palette allows you to embody the most extraordinary ideas. Beads are one of the most suitable materials for creating New Year's crafts, try to make beautiful miniature Christmas trees from multi-colored beads.

New Year's decorations made of beads

The following master class clearly demonstrates how to assemble a Christmas tree from beads step by step.

For this craft you will need:

• thin wire;
• green and golden beads;
• beads for the top.

Shown in the photo step by step process creating toys. The branches and tops are collected separately. To make one branch on a branch, you need to string 3 green beads, 2 gold beads and again 3 green beads onto the wire. For the upper branches, three such branches are enough; the lower ones are made more magnificent. A tree is formed from branches. The Christmas tree turns out very beautiful and elegant. The golden color on the branches can be replaced with silver to create a frosted effect.

A Christmas tree on a toothpick rod looks unusual. An ordinary coin can become a pedestal for it. To make a Christmas tree, insert a toothpick coated with glue into a flat bead and glue it to the coin. Make branches following the diagram and string them onto the “trunk” of the tree. Stick a star in the form of a figured bead on a pin on top.

To make a keychain on a chain in the shape of a Christmas tree you will need:

• large transparent green beads;
• small opaque gold beads;
• large transparent figured bead in the shape of a flower;
• gray bead for base;
• thin wire.

Assemble the craft according to the diagram shown in the photo.

Christmas tree earrings

Christmas tree earrings – unusual decoration, which will create a festive mood for you and those around you. They can become excellent or. Accessories for making earrings are sold in specialized craft stores. There you can purchase several loop-locks on which the entire structure will be attached. The photo shows ideas for creating such products. You can combine colors at your discretion.

To create New Year's crafts, purchase bright beads and do not forget about the decor in the form of small bows made of ribbons, multi-colored curly beads, chains, etc.

You can make such a beautiful Christmas tree with your own hands from beads. Very a good gift she can serve. To make it you will need green, emerald, light green and red beads. Below is a diagram of weaving such a Christmas tree.

You can also weave a Christmas tree like this from beads, and then decorate it with miniature crafts made from beads.

In addition to the options that have already been described here, I want to offer a couple more simple, but interesting options how to do Christmas tree from beads. I like this option, I made a bunch of these Christmas trees myself - beads and seed beads are strung in one line on a wire. Then the wire is twisted into a spiral:

Another option is to string beads onto a wire and connect them with a loop, 8 loops need to be made of one color, 7 colors are made (7 colors of the rainbow), each next 8 loops are one centimeter larger than the previous ones. Then everything is collected onto a common trunk, starting with the smallest ones:

The closer the New Year is, the more you want to surround yourself with New Year's decor to maintain festive mood. For creative people There are many ways to make something with your own hands. For example, a New Year tree. You can put such a souvenir at your workplace or give it to friends.

Make a Christmas tree from beads you can do it this way

The result is a very realistic appearance. This beauty is made in two stages. First we make the Christmas tree itself. Here . Don't be alarmed that the description is so long, everything is actually easy. And such a large volume of the article turned out to be due to a very clear explanation and abundance of pictures for each weaving step. Having made a Christmas tree according to the diagram, you will get this result

You can leave your work as is. But if we still want a New Year tree, then we need to decorate it. We make Christmas tree decorations from beads. This is actually the second stage of work.

Making Christmas balls

The New Year is approaching and I want to have the symbol of the year at home - a Christmas tree. It’s great if it’s a DIY craft. All it takes is a little perseverance and you can assemble a green or white Christmas tree from beads of this color.

You will need cut beads of white or green color, golden beads for the top (or pearl), thin wire (50 m). For the tips of the branches, use golden cut beads, so the products look more attractive and natural. The wire for a white Christmas tree should be silver, for green will do any copper wire.

This is roughly how the branches of a Christmas tree are collected:

Here are some more examples of how elegant and beautiful a beaded Christmas tree can be.

Christmas tree made of beads- can be a wonderful gift for the New Year or one of the details New Year's decor your home (office).

Make your own Christmas tree from beads it won't be difficult. If you want to make a Christmas tree different colors(white, green, mixed), take beads of the appropriate color, wire and follow the step-by-step photo diagram presented below:

This makes a wonderful Christmas tree!

Another detailed master class see this link. The result is a tree like this:

Good luck with your beading and Merry Christmas!

The Christmas tree made from beads looks very impressive and has a festive cozy feel. and at the same time shows how much her creator or creator is a person with great imagination and golden hands.

There are many options on how to make such a fluffy miracle, but basically the tray is assembled from many prepared branches in advance - this is the easiest way.

You can easily make a New Year's beauty from long glass beads, without which it is impossible to imagine the present magical holiday New Year!

And this the scheme is more difficult New Year's tray beads are basically the same as glass beads.

Using regular beads, the weaving pattern is almost the same.

For a real holiday, don’t forget to hang toys on your voluminous Christmas tree, which are very easy to make, because they can even be just large beautiful beads.

If you want to make a flat tray for example for decoration New Year's costume or just for holiday decoration in the house, then here is the diagram.

Happy New Year, dear needlewomen, patience and happiness to you in the New Year!

In order to make a Christmas tree from beads you can use the following weaving patterns, and also stock up on green beads, and the beads that match the color of the toys on the Christmas tree, usually first we make a lot of branches, and at the end we collect them into the main large spruce - this will be weaving volumetric Christmas tree, and for beginner needlewomen you can weave a flat Christmas tree:

You can also watch video master classes:

Such Christmas trees made of beads will be an excellent souvenir for New Year family and friends, and these beaded spruce trees can also be used as an element of apartment decor for the holiday. And you can also hang your real fir tree with such decorated Christmas trees, i.e. they will play the role of Christmas tree decorations.

Christmas tree made of beads

If you want to make your own New Year's crafts, then a beaded Christmas tree is a great option.

It’s not very difficult or time-consuming to make, and you can do it with the whole family.

You will see how to properly make a Christmas tree from beads and weaving patterns in this video.

I found another video that gives original ideas creating stunning toys in the form of Christmas trees from ordinary beads. An interesting find for needlewomen who are interested in modern beadwork.

A Christmas tree made of beads is a very painstaking and long work, the result of which will delight you not just for one day, but, perhaps, with careful handling, for a lifetime. To make a Christmas tree from beads you will need:

thin wire, beads of several colors (brown for the trunk, several shades of green to make the Christmas tree look more realistic, and colored beads for decoration), you definitely need to think about what you will make the stand out of, because without a stand the Christmas tree will be unstable.

How to weave a Christmas tree from beads? It is very difficult to explain through writing. But watching the entire manufacturing process and then repeating it is possible. I offer you a video master class on making a Christmas tree from beads.

See if this is what you need?

A little complicated and laborious? But the result is worth it.

I wish you success and a Happy New Year!