We all want our skin to be clean and soft; it is for these purposes that a facial steam bath is used, it washes away and dissolves fats in the pores, nourishes the skin with moisture, tones and makes it more tender. The vessels dilate and the skin receives more blood, this can be seen by the appearance of blush on the cheeks. When the pores expand, the face is deeply cleansed and beneficial and nutrients are better absorbed. After performing a steam bath for your face, you will immediately feel that your skin has cleansed and is easier to cleanse from blackheads and.

If you have problem or oily skin, then cleansing your facial skin is a must. But this procedure is also very useful for dry skin, you just can do it less often, once every four weeks is enough, do not forget that the procedure for dry skin is done with a rich cream applied to the face.

After using this method, the skin becomes smoother, easier to cleanse and remove acne.

How to make a facial steam bath at home?

Everything is very simple, you can make a steam bath by following just 3 simple steps:

1 . Place a saucepan on the fire and pour one liter of water into it; the saucepan should be enameled. Add 1/4 teaspoon of baking soda to the water.

2 . When the water starts to boil, turn off the stove and place the pan on the table, you can put a board under it. Wait until the water cools down a bit.

3 . Sit at the table (its height should be such that you are comfortable), tilt your head so that the steam hits your face, but not too low so as not to get burned, and throw on a terry towel.

If it gets too hot or hot, just open the towel a little. Ten minutes is enough to take a bath, but if you feel sick from the hot air, then simply stop the procedure.

After the procedure is completed, wash your face with cold water - this will tighten the pores, you can also use simple egg white, it tightens the pores and dries oily skin. After all these procedures, you should not go out into the cold air for at least 1-2 hours.

We've figured out how to cleanse the skin, but what about nutrients? Everything is very simple - in order to improve the effect of the bath, you just need to add some medicinal herbs and aromatic oil to the water. Just throw a tablespoon of a mixture of herbs into the pan and add a drop of oil with your favorite aroma.

1 . Herbs for oily skin: Take in equal parts: chamomile, mint, rosemary, sage, linden blossom, birch and willow leaves.

2 . Herbs for dry skin: we will need chamomile, flax seed, mint, birch buds and yarrow.

3 . For aging skin Horsetail, wormwood and yarrow are suitable.

If there is a rash of nervous origin on the skin, then add chamomile and hop cones to the facial bath; in this case, use lemon or grapefruit oil as an oil; they have an excellent effect not only on the skin, but also on the entire nervous system as a whole.

Steam bath for the face it not only helps you look beautiful, but also fights colds and runny nose; to do this, add oil or eucalyptus leaves to it. If you have high pressure, heart and circulatory diseases, problems with the thyroid gland and just very sensitive skin, then you should refuse to take a bath.

12/08/2018 Headings: Views: 22

Today, beauty salons offer you many different facial treatments. Their cost and effectiveness are sometimes simply not comparable. And some of them are inferior even to such a simple procedure as a steam bath. It will probably always be in fashion, thanks, first of all, to its accessibility and simplicity. After all, a small saucepan with clean water can always be found. There are no difficulties in preparing such a bath, and its effectiveness still remains high. The main thing is to be able to handle hot steam correctly so as not to burn your face and carry out the procedure with benefits for the skin.

Steam baths for the face. What are the benefits and how to carry them out?

Hot steam has a very beneficial effect on the skin of the face, significantly cleansing it. It helps the skin pores open, gently removes various impurities from it, and cleanses the skin deeply enough. Steam makes blood circulation more intense, which means it refreshes the overall skin. It becomes more moist and tender. Since steam baths cleanse the skin, they prevent acne from developing, and in addition they will protect you from colds and stress.

How often should such procedures be performed?

The determining factor here is skin type. If it is dry or withering, then 3-4 times a week. And, if normal or oily, then once every 10-14 days will be enough.

The duration of the steam bath again depends on your skin. Oily skin needs to be “steamed” for 7-10 minutes (if the pores are heavily clogged and dirty - a maximum of 15 minutes!), normal skin - 5-7 minutes, and dry skin - no more than 3-5 minutes.

What water should I use?

Of course, tap water is not suitable for this procedure. There is too much bleach in it. And such vapors will only harm the skin. So, use bottled water.

Not only ordinary people, but also cosmetologists talk about steam baths and baths - these procedures are considered extremely useful for getting rid of and. But to get desired effect, you need to know the rules for carrying out such procedures - with steam baths and baths, the effect is not only on the epidermis, but also on the circulatory system of the body.

The benefits of steam baths and baths for the skin

After just a few of the procedures under consideration, the skin of the face becomes soft, bright and smooth - this effect is achieved due to the medicinal plants used. In addition to strictly aesthetic effects, steam baths and baths have the following effects:

• the contents of clogged pores become softer and come out on their own; it is extremely rare that the use of a scrub is required for complete cleansing;
• pairs of decoctions of medicinal plants soothe the skin and reduce inflammation;
• the skin is completely cleansed of cosmetics (both decorative and medicinal residues), toxins and deposits of sebaceous gland secretions;
• cellular respiration of the epidermis becomes better - this leads to the appearance of a healthy blush.

After carrying out the procedure in question, cosmetologists recommend applying a moisturizing mask, scrub or cream to the skin. The fact is that after exposure to steam, the skin pores are cleaned as much as possible, open and can “accept” the maximum amount of beneficial substances from skin care products.

Steam baths and baths for acne and blackheads are the most popular procedure among ordinary people. This is due to the fact that it can be carried out at home and without the need to purchase expensive products.

We recommend reading:

Contraindications and indications for facial steaming

The procedures under consideration can and should be carried out by all people whose skin has flaws - for example, massive acne rashes or. Cosmetologists claim that steam baths and baths for acne and blackheads can successfully replace expensive facial cleansing procedures in beauty salons - the effect will be the same, and the costs (both time and financial) will be much less.

But since steam procedures have not a superficial, but a deep effect, there are contraindications to their implementation. It is worth remembering some warnings from experts:

• It is strictly forbidden to give steam baths and baths for acne and blackheads to people with diagnosed diseases of the cardiovascular and respiratory systems;
• Such procedures are carried out with extreme caution for people with any pathologies that occur in a chronic form (consultation with the attending physician will be required);
• Steam baths and saunas should not be used at elevated body temperatures.

To regularly carry out cleansing steam baths and baths for acne and blackheads, you need to prepare a set of necessary “tools”.

Firstly, you will need a plastic basin or bowl with a volume of 3 liters. Moreover, these dishes cannot be used for other purposes - for example, doing laundry or washing vegetables in it is strictly prohibited. Therefore, it is advisable to purchase a new bowl or basin and designate its use only for the procedures in question.

Secondly, you will need a large towel that will completely cover your head and face when bowed. Such a towel should be thick enough and not allow air to pass through.

Thirdly, you need to stock up on various medicinal plants - for example, eucalyptus leaves, chamomile flowers, calendula flowers, aloe extract and others. But keep in mind that many plants can trigger an allergy attack, so you need to select them individually.

How to make a steam bath correctly

To carry out the procedure, you need to allocate absolutely free time– there is no need to rush and get distracted. Expect that it will take about half an hour to prepare for the procedure, perform it, and act afterwards. And now we do everything step by step:

1. Boil 2-3 liters of water and pour into a prepared basin or bowl.
2. Pour 1 cup of decoction or tincture of medicinal plants into boiling water and stir thoroughly (not with your hands!).
3. We remove the hair (pin it up or tie it with a scarf).
4. We lean our face over the basin and cover ourselves with a towel.

Note:if the steam action is too aggressive and tolerate high temperature is impossible, then increase the distance between your face and the water. But then, as the liquid cools, reduce it.

The procedure itself lasts no more than 10 minutes, it must be stopped immediately as soon as the intense steam from the water with the decoction/tincture of the medicinal plant stops being released. Experts do not recommend wiping your face immediately after a steam bath - let the skin dry on its own. But after 10 minutes, you can wipe your face with a dry cloth and apply a moisturizer to it. nutritious cream or scrub.

You can take steam baths or baths for acne and blackheads once a week.

The most effective recipes

Of course, it would be stupid to thoughtlessly use medicinal herbs to carry out the procedure in question - there are certain representatives of the plant world that have a specific effect on acne, wen, and so on.

Very often, when reading any recipe for a cream, tender dough or cosmetic mask, we come across the expression “water bath”. It would seem that everyone knows from childhood what it is, but, nevertheless, the question of how to make a water bath correctly does not lose its relevance, especially for young housewives who are just beginning to comprehend the basics of culinary art.

So, let's try to understand the intricacies of this process. The first question is when and why a water bath is needed. It is worth paying attention to this method of heating and cooking in cases where:

• It is required to melt foods that are sensitive to high temperatures in such a way as to prevent them from burning and sticking to the walls of the cookware. Use a water bath to melt chocolate, butter or soap base for home soap making.
• It is necessary to heat any ingredients to a relatively low temperature (50-60°). This is often necessary when making masks for hair or face, which contain natural oils– when heated, they are better absorbed and have a much more noticeable effect.
• It is necessary to prepare decoctions or infusions of herbs without losing a large amount of useful ingredients that are destroyed when boiled.
• There is a need to heat products that are prone to changing structure under the influence of temperature - yolk, gelatin, etc.

In all of the above cases, as well as in a number of others, it is very important to know how to make a water bath. It also has its own subtleties and rules, knowledge of which will allow you to avoid common mistakes.

First of all, a water bath will turn out great if the dishes are chosen correctly, but these are not all the details that are worth paying attention to.

• The lower pan or bowl should have a thick bottom and, if possible, thick walls. In this case, the boiling will not be so violent and drops of water will not fall into the mass you are preparing.
• Be sure to cover the bottom of the lower dish with a clean linen or cotton towel - this will make the boiling even smoother, and this is the key to how to make a water bath.
• The upper dish should be of such a diameter that its bottom touches the water column, but the walls remain in the air. In this position, the effect will be maximum - the upper bowl will be treated with hot steam, and the water will practically not touch it. Select dishes in advance that match each other in diameter, and remember this “pair” - next time you will save time searching for suitable vessels.
• Water bath at home it involves constantly stirring the mixture in the upper bowl. This helps to control all changes in consistency and not miss the moment when the bowl needs to be removed from the heat.
• You should lower the bowl into a large saucepan only after the water has boiled in it, otherwise the process of heating the mixture being prepared will be disrupted, and the result may not turn out at all as desired.
• When preparing decoctions of medicinal plants, you do not need to stir the mixture continuously, since burning will not happen. It is better to cover it with a lid to prevent essential oils, which are often the main active ingredients of traditional medicine, from evaporating.
• If the diameter of the upper pan practically coincides with the lower pan, you should worry in advance about how it can be removed after heating. It might be worth hanging it above the water using a thick thread or making improvised handles if there are none.

These are the basic rules on how to make a water bath without making mistakes. But even if you don’t succeed the first time, don’t worry. Two or three times - and you will develop the necessary skill that allows you to do everything easily and quickly.

How to make a water bath? All home cooking methods

Sometimes after reading a recipe in a cookbook, you get the impression that you have read some kind of strange code for special agents. Blanch, simmer with a little butter, cook until it tastes like a “soft ball” - and these are not all the terms used by chefs. But perhaps the most popular among them is the “water bath”. Many people don’t know how to make it, and therefore refuse such recipes. And completely in vain. It’s easy to make, and dishes cooked in a water or steam bath are tasty and healthy.

It is used in cases where delicate cooking and heating of the dish to no more than 100 degrees is required. The easiest way to make a water bath is to pour water into one pan and place a second, smaller one in it. This is exactly where the products that need to be cooked are placed. Typically this method is used for melting butters and chocolate, as well as for making warm custards and sponge dough. Homemade cottage cheese is also made in a similar steam bath.

Another option for making a water bath is an improvised double boiler. To do this, you need to stretch gauze over a pan of water at a height of 3-4 centimeters from the last one. This way you can cook steamed dishes - vegetables, fish and even meat. In fact, electric steamers operate on this principle, which today can be bought at any hardware store. Before their appearance, special pans with a double bottom were used. This method of cooking is considered the most dietary and healthy.

Many, however, believe that the steam menu is only suitable for children or those on a strict diet. In fact, you can cook many original and delicious dishes with steam. These can be a variety of soufflés, omelettes and even cupcakes. Cooking in a water bath saturates them with additional moisture and makes them juicy, preserving all the benefits of the products. So the steam menu can be quite varied and not only dietary.

But this does not exhaust all the cases when you need to know how to make a water bath. To make cheesecake, cake or soufflé in the oven, this cooking method is often used. This is because for delicate baked goods, you need to moderate the high temperature of the oven and prevent the top from cracking. To do this, you need to pour water into a deep baking tray so that it reaches the middle of the baking pan. If using a springform pan, it should be wrapped in foil to prevent moisture from entering. It is advisable to wrap in several layers and overlap and, of course, do not rush.

Knowing how to make a water bath at home, you can diversify your menu not only dietary dishes. Thanks to it, preparing many cakes, soufflés and cheesecakes will become a very common task. This means that you can organize small holidays for your family every day. And steamed cutlets, fish and vegetables often look much more attractive than fried or stewed ones. And most importantly, they combine delicate taste and benefits, as they are prepared without adding oil.

What kind of steam bath can be made at home - implementation options

Usually the word “bathhouse” evokes in people a visual image of a room where visitors first warm up under the influence of water steam, cool down by washing in pools or showers, and then spend leisure hours in cozy relaxation rooms. The article will discuss such a procedure as a steam bath for the face, and the features of its use.

Applicability of steam baths in various fields

It is worth considering a procedure such as a steam bath, comparing it with a regular sauna, which is popular among a large number of people. A steam (water) bath is distinguished by the fact that the mixture poured into a certain container is evenly heated over the fire, but does not burn and does not lose its beneficial qualities.

At the same time, the sauna operates on a similar principle: with each new stage of the procedures, the visitor warms up at a higher steam temperature, which has a beneficial effect on the general condition of his body.

Some people associate the concept of “steam bath” with the method of steaming food, but in fact, the same procedure for heating various elements is also used in the industrial sphere.

The “steam bath” method is used in the following industries:

• food;
• petrochemical;
• gas;
• pharmaceutical;
• veterinary

In each individual case, the procedure differs only in that containers of different volumes are used. Industrial areas most often require the use of specialized laboratory devices that are manufactured in factories.

A high-quality laboratory device is the key to a successful experiment

Support a certain temperature regime liquids are possible only with the help of a special water bath, manufactured with precise adherence to technology. According to the rules, such containers must comply with GOST standards, as well as the liquid examined with their help.

At industrial enterprises, samples of a certain mixture are taken, which can only be tested using a laboratory water bath. The device allows you to determine a number of mixture parameters and compare them with generally accepted standards.

Quite often, to conduct a certain study (when testing a substance for compliance with GOSTs), it is impossible to replace a laboratory water bath.

This installation copes with the following tasks:

• thermostatic heating;
• distillation;
• evaporation;
• drying;
• enrichment of substances.

With its help, more specific problems are also solved, such as, for example, the extraction of fat from dairy products. According to the standard, the temperature in the water bath tank is maintained between 65 and 75 degrees Celsius. Typically, it is under such temperature conditions that food industry products are checked for compliance with GOSTs.

Essentially, a steam bath is like a kettle in which the water temperature does not exceed 100 degrees Celsius, but if necessary (for research purposes), it is increased by adding ordinary kitchen salt. Carrying out a huge number of laboratory experiments without this equipment is simply impossible. As mentioned above, an industrial steam bath will help in solving a variety of problems.

This equipment may differ in capacity or operating principle. There can be installations controlled by one operator or several. The functionality of these steam baths also varies greatly. For example, a laboratory installation for studying the composition of polyethylene is controlled by six operators.

Some containers operate on the principle of a chemical centrifuge, when you can place a large number of flasks and other utensils.

Effective and cheap cosmetic procedure

Definitely, a steam bath for the face at home is the simplest cosmetic product that allows you to tone and improve the skin of your face so that you look beautiful not only in photos, but also when meeting in person with friends, relatives and acquaintances.

The essence of its work is quite simple:

• when steaming, the pores of the skin open, which allows the fat cells accumulated in them to be destroyed;
• water vapor saturates the epithelial tissue with moisture, giving it tone;
• The elasticity of the skin increases, but at the same time it becomes softer;
• Warm water vapor also causes a rush of blood into the epidermis, which is expressed by blush.

It is important not only to understand how to make a steam bath yourself, but also to take into account a number of nuances when carrying out the procedure.

We are talking about the following features of taking a steam bath:

• when steaming, facial skin can be treated with various cleansing solutions, creams and gels;
• steaming is an excellent preventive measure in the treatment of acne;
• practically no restrictions on use, with the exception of increased sensitivity of the skin and some diseases;
• Maximum effectiveness when treating oily, dry or combination skin types.

Experts always remind that dry or combination skin should be treated fatty creams before taking bath procedures, so as not to cause the effect of early aging of the skin. Also, the effectiveness of the procedures increases when various herbs that have a beneficial effect on the skin are added to the water.

If we are talking about how to make a steam bath at home, then you should first become familiar with the effects that certain herbs and substances used have.

The modern market of cosmetic products offers customers a wide selection of steam baths manufactured in industrial conditions. For example, inhalers used either to treat respiratory diseases or to cleanse the skin of the face.

The frequency of procedures depends on the individual characteristics of the patient’s skin. The period between two procedures can range from 3-4 to 7 days.

Creating a steam bath at home

Every woman knows that a water bath for the face is very useful, but she does not always have the opportunity to use this procedure for a fee. In this regard, there is a need to carry out the procedure at home using improvised means.

The main container for the procedure can be a small enamel saucepan (from 2 liters). You need to pour a liter of water into it and add a little baking soda. Then the water is brought to a boil, and the pan is placed on a convenient surface, where it will be easy for a person to expose his face to the water vapor.

The resulting solution must be allowed to cool slightly so that the temperature of the steam is high, but does not burn the face. Then you should sit by the pan so that the steam envelops your face. For maximum efficiency During the procedure, a piece of cloth is placed over the head, which will prevent the liquid from cooling quickly.

The entire procedure should take approximately 10 minutes. If you feel any negative manifestations, you should immediately stop taking the procedures. If the beneficial effect on the body needs to be enhanced or a specific effect needs to be created, then various plants can be added to the water: chamomile, linden, parsley, etc.

Herbs are selected taking into account the characteristics of the skin:

• oily skin loves rosemary, oak bark, sage, birch and willow leaves;
• on dry soil the most beneficial effect will be provided by: mint, birch buds, yarrow, linden flowers;
• You can moisturize the skin with dried wormwood and horsetail;
• The functioning of the nervous system can be normalized with lemon oil or hop cones.

A steam bath is not suitable for use by people who have:

• high blood pressure;
• metabolic dysfunction;
• high sensitivity of the skin;
• individual intolerance (allergy) to any of the listed herbs.

Bottom line

The article describes in detail the procedure for taking a steam bath, its features, as well as the main advantages and disadvantages. If you follow the instructions, the procedure will be effective, and the result will be healthy facial skin that looks beautiful not only in edited photos, but also in real life. Of course, you can entrust your face to employees beauty salon, but at home you won’t have to pay practically anything.

When and where to use a water bath

Device for the procedure

At first glance, it seems that there is nothing in common between a bathhouse in the generally accepted meaning of the word and the concept of “steam bath”. But it’s worth thinking about what happens to a person in a sauna and what effect is achieved. In a water bath, any mixture is slowly heated, while the gentle action of the flame does not allow the product to burn. Likewise, a person in a sauna takes on more and more air temperature with each new entry into the steam room. However, its condition is such that it does not harm the body.

Common people most often associate the concept of “steam bath” with cooking. But this is not entirely true, because this heating principle is also used in production. Moreover, the scope of application of a steam bath is quite wide. These are the following industries:

• Food
• Petrochemical
• Gas
• Medical
• Veterinary

It is clear that devices of different sizes are used to achieve different goals. It’s one thing to prepare cream for culinary masterpieces in the kitchen, and another thing to isolate the substance under production conditions. In the latter case, special laboratory devices are required; they must be made in factories.

Laboratory devices - the basis of experiments

After inhalation, the cold will go away

To maintain a certain liquid temperature according to GOST, you need a laboratory water bath. Thanks to it, it is possible to carry out thermostatic heating, distillation, evaporation, drying or enrichment of substances. Almost any product liquid composition must comply with GOST. This can be achieved by sampling. These samples are then subjected to special laboratory manipulations, the results of which show how well the tested substance complies with the approved standard.

When carrying out this kind of procedure, nothing can replace a steam bath. To isolate fat from milk and its products, the laboratory must have a set of necessary equipment. The water bath maintains a temperature of 65-75 degrees, creating conditions for testing. In this way, the conformity of products with state standards for the food industry is confirmed.

The water temperature in the steam bath should not exceed 100 degrees. If for research purposes it is necessary to raise it a little higher, ordinary table salt is added to the water. Without such laboratory equipment, it is impossible to conduct many experiments, especially if you subsequently have to undergo a test for compliance with GOST.

Advice from the master!

Water baths, constructed in special factories, serve various production purposes.

Such equipment can be very different both in volume and in operating principle. Laboratory-type water baths can be very different. One specialist or several can work with them. At the same time, the equipment of such equipment is different. For example, a laboratory bath in which the extractive substance contained in polyethylene is determined has six workstations. Some containers provide space for multiple flasks and other laboratory glassware. This makes the verification process much faster.

Beautiful and clean skin faces are the calling card of every self-respecting lady. Oily shine, enlarged pores, blackheads - this is not the entire list of shortcomings that women struggle with every day. different ages. Modern cosmetology offers effective method getting rid of skin problems - deep cleaning faces. There is a safe and budget-friendly alternative to such an expensive procedure with an extensive list of contraindications - a steam bath at home.

Indications for use

The procedure is suitable for those who want to cleanse and refresh their facial skin. A steam bath is indicated for the following problems:

• Disturbances in the functioning of the sebaceous glands.
• Excessive formation of pimples and blackheads.
• Violation of blood microcirculation in capillaries.
• Yellowness of the skin.
• Frequent use of decorative cosmetics.

The steam bath is contraindicated for persons suffering from bronchial asthma and hypertension. The procedure should be carried out with caution in case of rashes associated with eczema or psoriasis, when the capillary network is located close to the surface of the skin.

Preparing for steaming

A face at home begins with determining its type. Oily skin is in greatest need of steaming. The duration of the procedure for this type should be up to 25 minutes. For combination skin, 15 - 20 minutes is enough. At normal type For minor acne, steaming should take about 10 minutes. For dry skin, the duration of the procedure should not exceed 5 minutes. If there are no problems with rashes, it is better to postpone steam cleansing.

For the steam bath you need to prepare:

Towel;

Medicinal herbs;

Aroma oils;

Herbal infusions.

An important element of the procedure is the steam bath itself. You can purchase a specialized device from a pharmacy chain, or use any deep metal or glass bowl into which you pour hot water. There is no fundamental difference between the methods of organizing steam supply, but when using an automatic device, you cannot add herbs and oils to the water - this leads to equipment breakdown. The cost of such a device varies from 1000 to 3000 rubles, which is not affordable for everyone. Using an ordinary deep container allows you not only to expand the pores, but with the help of infusions and herbs, speed up the healing of small wounds and redness, but also save a decent amount.

Rules of procedure

For safety reasons, a container with hot water must be installed on a flat, dry surface to avoid tipping over and causing burns. The herbal mixture must be prepared in advance. At the pharmacy you can buy sage, celandine, calendula, chamomile or plantain. For greater effectiveness, the herbs should be crushed in a wooden mortar or bowl. There is no need to follow strict proportions. It is important to remove the plant stems from the herbal mixture, leaving behind the inflorescences and leaves.

As soon as the mixture is ready, it needs to be placed in a deep container, pour boiling water and add a couple of drops essential oil, for example, eucalyptus.

The volume of water should not exceed one liter. A steam bath is dangerous for the mucous membranes of the eyes, so they must be closed during the entire steaming period. The face should be at a distance of at least 20 - 25 cm from the steam container, and the head should be covered with a towel. Deep cleansing of the facial skin is best done on a day off so that you can devote enough time to steaming and removing comedones.

Recipes for deep cleansing

For normal skin types, a steam bath for the face should not be accompanied by the use of masks and scrubs; you can apply a thin layer of daily nourishing cream and not leave the house for at least 2 - 3 hours.

Combination and oily skin is treated with homemade scrub: Sleeping coffee grounds are mixed in a 1:1 ratio with thick sour cream and applied to problem areas with massaging movements. A mixture of crushed oatmeal and honey is also suitable here, which will additionally saturate the damaged areas with useful substances, only such a scrub after application must be left for about half an hour. To moisturize, it is recommended to mix egg white into the scrub.

An orange mask is suitable for dry skin types. In a 1:1 ratio, natural orange juice is mixed with sour cream, applied to the face and left for 20 minutes.

Is home skin cleansing dangerous?

Cleansing your facial skin at home will be useful and safe only if you follow all the recommendations. It is important to correctly determine your skin type and choose the appropriate composition of a mask or scrub. During salon procedure During deep cleansing, the cosmetologist removes a larger layer of skin than would be done at home, causing the skin to peel for a long time, redness does not go away for a long time, which creates discomfort.

In a beauty salon, all ingredients are of a chemical nature, which can contribute to the occurrence of allergic reaction. At home, a steam bath with natural ingredients will refresh your face, and your skin will become smooth without acne, blackheads and oily shine.