How to insert embroidery into a frame: original ideas for creativity and master classes on designing work. Do-it-yourself needlework: how to arrange embroidery in a beautiful frame

Beautiful embroidery“looks” only if it is correctly designed. Unfortunately, many needlewomen limit themselves to embroidering the pattern or design they like... and put their work aside, citing the fact that the services of a framing workshop are too expensive. Indeed, few people can afford to turn to masters. But you can arrange embroidery in an inexpensive frame with a mat with your own hands - quite quickly and inexpensively. Perhaps this method will suit you.

So, to arrange embroidery in a frame with a passe-partout, you will need:

a ready-made photo frame, suitable in size to the design of the embroidered motif;

velvet paper for passe-partout;

strong thread;

breadboard knife;

a simple pencil;

How to make embroidery with your own hands: master class

Prepare your embroidery. To do this, steam it thoroughly with an iron from the wrong side.

Disassemble the photo frame into its components: glass, base, piece of paper with a picture - we will also need it as a sample of the required size. I had a plain unfinished wood frame so I pre-stained it yellow twice acrylic paint: it is assumed that this measure will allow the frame to live longer than untreated wooden products live under normal conditions.

We leave the base in front of us, put the embroidery on it, figuring out its most advantageous position, and thread the thread into the needle.

We grab a corner of the embroidery with a needle and, throwing the thread to the wrong side, we pick up the corner of the canvas from the opposite side with the needle.

This procedure takes quite a lot of thread, so when it comes time to change the thread, make several fastenings and thread new thread. Thus, picking up the edge of the canvas on one side and the other, go to the end of the row. You need to stitch with tension, but make sure that the design is not distorted and the canvas does not become wavy. If you have steamed the embroidery well, you won’t have to stretch the fabric too much.

Then we stretch the fabric onto the base perpendicular to the first stitching.

This was the most time-consuming part of the job.

Now let's take a piece of paper with a picture from our photo frame and put it on our embroidery. If you, like me, have the fabric at the top and bottom damaged by stamps that are not intended for prying eyes, on this piece of paper you will mark with a pencil acceptable limits windows in the passe-partout.

Align this window with a ruler and cut through it. It’s better to spend a minute creating a sample than to redo the entire passe-partout later.

I was satisfied with everything, so I transferred the sample passe-partout to the wrong side of the velvet paper and drew a rectangle of the size I needed - I drew it and cut it under the ruler using a breadboard knife, and at the same time cut out a rectangle of the same size from thick cardboard - it will be useful to us in order to close the tension threads of the embroidered motif onto the base.

Using a sample passe-partout, I marked with dots the corners of the window that would need to be cut, and connected them with a pencil under a ruler, with some pressure. I decided to make rounded edges of the mat so that the edges of the cuts would not shine. That's why we only draw the frame with a pencil!

We will cut through the window using a breadboard knife and a ruler. We apply a ruler diagonally and cut through the passe-partout window crosswise.

We bend the edges inward and trim off the excess.

Now you know how to arrange embroidery in a frame with a mat, and now it’s time to put the whole structure together: put glass in the frame, then a mat (we iron the folds well, but carefully so as not to damage the nap of the velvet paper), on top - attached to embroidery base, and then a sheet of cardboard that will cover the tension threads.

As you can see, decorating embroidery is quite simple, and, as practice shows, an embroidered portrait of Princess Jasmine can be a wonderful gift for a five-year-old girl who is passionate about Disney princesses.

Eva Cascio specifically for the site

A few weeks, or maybe months, and now your embroidery is ready. But embroidering the plot is only half the battle, because the design of the embroidery is also of great importance. How you choose a frame for embroidery, a mat, and how you design your work will determine what impression the embroidery will leave.

Framing workshop services are not cheap. But you can create a decent design for your embroidery yourself. In this article we will look at several ways to decorate embroidery with your own hands, and do it professionally and accurately.

Let's start with the very basics - how to properly insert embroidery into a frame.

How to carefully stretch embroidery onto a stretcher

First you need to determine the center of the embroidery and the backing. Draw central vertical and horizontal lines on the stretcher. Similarly, define these lines on the embroidery. Now align these two centers and secure with pins on the right side. This technology will allow you to avoid distortions of the canvas when stretching it onto the substrate.

Check if you are happy with how the embroidery is positioned and if there are any distortions. Only after this (aligning and securing the centers) cut off the excess canvas, leaving 3-4 cm around the entire perimeter. Process the edges of the canvas:

Starting from the center, moving to the outer corners, pull the canvas onto the stretcher and secure with pins, sticking them all the way to the end into the stretcher at a distance of about one centimeter. To avoid the appearance of folds and wrinkles on the canvas, when securing with a pin, choose the canvas thread as a guide and make sure that it is strictly perpendicular to you.

After securing the canvas around the entire perimeter of the stretcher, carefully tuck and sew the corner folds of the canvas:

Glue the edges of the canvas along the entire perimeter to the stretcher with double-sided adhesive tape.

This method of securing the canvas to the backing will allow you to avoid the appearance of distortions and folds in the embroidery, which often appear over time on unsecured canvas.

Passepartout for embroidery

Now let's look at two options for creating a textile mat for embroidery.

Option one:

Iron the embroidered canvas well from the wrong side:

Decide how wide your mat will be relative to the embroidery itself. On the wrong side of the canvas, mark its width:

Around the resulting mat outline, draw another rectangle approximately 4 cm wide.

Trim the corners of the large rectangle. This is what you should get:

Make a copy of the wrong side of the canvas - this will be the pattern for the passe-partout:

Place tracing paper on the copy and copy the outline of the embroidery itself and the outer edge onto it:

Place the resulting pattern on the mat fabric:

Trim the fabric along the outer edge and cut along the outline of the embroidery inside:

Place the resulting passe-partout on the front side of the canvas:

Secure the fabric with pins:

Carefully sew the fabric and canvas along the contour around the embroidery:

This is what the inside looks like:

Place the subframe on the wrong side:

Fold the edges of the fabric over the stretcher and sew each corner of the bevel:

Secure the edges of the fabric to the stretcher using double-sided adhesive tape:

Insert into frame:

Yes, the process is long and quite labor-intensive, but it allows you to achieve maximum accuracy when preparing the work. And the result is without a doubt worth it.

Option two:

This method of making fabric mats is especially suitable for monochrome embroidery.

As a basis for the passe-partout, you can use thick cardboard, a frame made of chipboard or plastic.

Apply glue to the back of the fabric and one side of the cardboard. Transfer the cardboard onto the fabric. Make sure to place it in the center of the piece of fabric, leaving equal parts on each side. Press the cardboard firmly onto the fabric. Check the front of the fabric to make sure all air bubbles are coming out:

Carefully trim the corners of the fabric, leaving a small allowance of a few millimeters at the corners of the cardboard:

Apply glue to the edges of the fabric and cardboard. Stretch the fabric over the cardboard, starting from an area near the corner. Iron the fabric firmly with your hand so that no air bubbles remain:

Cut the inside of the fabric diagonally in an X shape, starting at the corners. Cut out a rectangle, leaving 2-3 cm of fabric on each side:

We coat both surfaces with glue and stretch the fabric onto the cardboard, starting from the corners. It is worth paying attention to the outer corners - coat them with additional glue and smooth them with your finger:

Leave the finished mat to dry completely:

This method of creating a passe-partout involves a wide variety of color solutions; you just need to decide on the fabric pattern.

Video - “How to arrange embroidery in a passe-partout”

Video - “Independent design of embroidery in a frame with mat”

Hoop - like a frame for embroidery

Using a hoop as a frame for embroidery is not a new idea, and has rather become a classic. And this is quite understandable, because the finished work thus acquires an original and very attractive appearance.

But using a hoop as a frame requires some subtleties. In order for the embroidery to be well-designed, it is necessary to properly secure the canvas to the hoop. You cannot simply insert the embroidery into the hoop, tighten it tightly, and trim off the excess canvas around the edge of the hoop. And that's why:

over time, the tension of the canvas in the hoop weakens, and if the edge is cut close to the hoop, then it will no longer be possible to tighten the embroidery;
embroidery in a hoop, unlike an embroidered picture in a frame under glass, periodically requires washing; It’s unlikely that you’ll be able to insert the embroidery back into the hoop with such an edge.

Let's look at several ways to secure embroidery in a hoop.

Option one:

This method involves fixing the canvas in the hoop “not tightly”; if necessary, the embroidery can be easily removed from the hoop at any time.

Trim the excess canvas around the hoop, leaving a strip slightly smaller than the radius of the hoop (for example, if the hoop diameter is 10cm, you should leave about 4cm):

Stepping back approximately 1cm from the edge of the canvas, sew in a circle using a “forward needle” seam. Do not tighten the knot too much:

This is what you should get:

Now grab both ends of the thread and pull the fabric evenly:

If you do everything carefully, the frills will meet in the center and will be flat (they will not puff up):

Tie a knot at the end and you're done:

Option two:

This method no longer involves removing the embroidery from the hoop, but at the same time allows you to achieve maximum accuracy when decorating the embroidery.

Additionally, you will need a piece of cotton fabric that matches the size of the embroidery.

We place additional fabric on the inner hoop, put a canvas with embroidery on top, and secure everything on top with the outer hoop:

Carefully smooth out all the folds on both fabrics, align the embroidery, and finally tighten the hoop:

We cut the inner lining fabric flush with the inner hoop. Decide whether there is a need to cut the canvas itself - it should be wide enough to cover the width of the hoop:

Apply glue to the inner hoop of the hoop:

We press the canvas to the hoop along the entire perimeter:

This is what we end up with:

Hoop decor

If you use a hoop as a frame for embroidery, then like any other frame, they can also be decorated. And here it is the same, there are a lot of ideas, here are a few of them:

Decor with braid

In this case, the braid is simply glued from the wrong side along the edge of the hoop:

Decor with ribbons:

Fabric decor:

This method is not only original, but also practical - the fabric that is used to wrap the hoop protects the canvas from damage when the embroidery is pulled. In addition, the canvas holds tension longer and does not sag over time.

Crochet hoop:

In the option proposed above, the outer hoop is tied. But there is another original way, in which, on the contrary, the inner hoop is tied:

We hope that the proposed ideas and master classes on embroidery design were useful to you. Share your comments and ideas.

We wish you creative success!

Embroidery is the most ancient art of all times and peoples. It came to us from the distant era of primitive human culture. Nowadays, there are many types of embroidery, be it cross stitch or satin stitch, they also embroider with ribbons and beads. The embroidery process itself is not complicated, especially since stores now sell kits that contain ready-made color patterns and even threads and needles. However, despite the fact that such kits describe everything, including how to align the embroidery or fasten the thread without a knot, they do not contain the main thing - how to insert the finished work into a frame.

Any master would want to hang his work on his wall or give it to someone as a gift. But most often, embroiderers do not know how to beautifully frame their work.

This article presents several ways to design your work.

How to insert embroidery into a frame: preparatory stage

If the work gets dirty during the embroidery process, it needs to be washed in water and soap, because after framing it it will be almost impossible to do this. Next, put interlining from the inside out and iron the picture. This way the work will be neat and durable. It is also worth paying attention that the color of the non-woven fabric must match the color of the product. You can also use thick cardboard as a backing.

The frame must be purchased according to the size of the product itself and it is desirable that it has glass. Over time, the threads may lose their brightness, and the work will need to be washed often, and the glass will protect the product well from dust.

The tone and design of the frame should be in harmony with the work itself, but this is a personal matter. It can be classic, painted wood or gold. Although in specialized stores you can find a huge selection of frames or baguettes.

You can also use a mat in your work. This is a small frame with a hole cut out in the center to fit the size of the embroidery. For passe-partout you can use regular cardboard, thick paper or plain wallpaper. It focuses the viewer's attention on the product. If we talk about color, the mat should match the base color of the product itself or the color of the frame.

Now let's look at the most famous ways to insert embroidery into a frame. When all preparatory work done, the product is washed and ironed, the frame is prepared, you can begin the main part of the work.

Stretching and securing embroidery with pushpins

They take plywood or chipboard as a basis and, tightly stretching the embroidery, secure it with buttons. This option is not very good, because over time the embroidery can simply “come apart” and sag on the buttons.

Stretching embroidery using threads

This design method is the most common. For work you will also need a sheet of plywood or chipboard. It is necessary to stretch the product onto the sheet, leaving about 1-2 cm of free edges of the canvas around the perimeter to fix the product.

Secure the embroidery with pins so that it does not slip. On the back side of the backing, the left and right edges must be sewn with large stitches. We carry out the same manipulations with the upper and lower edges. When working, be sure to watch the fit of the embroidery on the front side.

But this method of tensioning is not good enough, because... Even when the embroidery is secured, it can still move at the end of the work.

Method of stretching embroidery using double-sided tape

To work, you need double-sided or window tape.

The design is universal in that the entire process is carried out on the front side, and this provides the opportunity to see all the shortcomings. The embroidery can be attached to the tape several times - it will still hold it tightly. When working with window tape, you just need to replace the tape if you can’t attach it right away.

This method is very easy for beginners, because... all imperfections in the work are visible, no markings are required. You can use pieces of tape repeatedly, you just need to make sure that it is under your passport. Double-sided tape is glued under the passport from the front side around the perimeter. At the end, the embroidery is stretched and glued. The work is ready!

Product design using the stitching method

This method is actually not easy. This requires masculine strength. Taking a sheet of chipboard or plywood to size, you need to drill small holes around the perimeter at a distance of 1 cm or use an awl. You need to “stitch” the embroidery with a thread through these holes.

First you need to secure the corners of the work so that the embroidery does not slip. The product must be stitched “forward with a needle.” In the future, such work will be firmly fixed and will last a long time.

As practice has shown, this method is the fastest and most reliable. After the embroidery is fixed, all that remains is to assemble the work - put the glass and frame down, and the embroidery itself on the backing and clamp this structure on the sides with metal clips.

After all the work done, the finished decorated product can be placed on the wall or surprised relatives and friends with a gift. But it doesn’t matter at all, because such long and labor-intensive work will please everyone!

Video on the topic of the article

Embroidery- the oldest type of needlework. But it’s not enough to embroider the picture itself; you also need to make sure that it becomes an excellent decoration for your home.

Making embroidery in a frame with your own hands is no less interesting activity than the process of creating a handmade painting itself.

Features of the embroidery frame

The general style of housing is one of the most important factors which must be followed in such situations. Several other important recommendations will not be superfluous.

The thematic focus must be taken into account. Still lifes, animals, and historical subjects look ideal in wooden frames. Plastic products must be done for marine images. Additionally, you can decorate with shells. A cardboard frame is a good addition for children's drawings.
You shouldn’t forget about the shape of the product either. It directly depends on the embroidery. It’s good if the silhouette completely repeats the composition. The frame shape is allowed: round, square, rectangular, oval.
It is important to choose the correct frame size when decorating. An indentation of more than two centimeters is a good solution for small compositions. The frame should not touch the edges of the image.
The color scheme should correspond to the shades prevailing in the image itself.

Making a passe-partout

You need to stretch the embroidery onto the mat with your own hands before placing it in the frame. It is enough to use simple cardboard and cut it to the size of the picture. Place the embroidery face down on a flat surface. We place the cardboard base in the center.

We fold the edges of the embroidery onto the base with our own hands. We pull together the opposite edges of the fabric so that the material lies evenly on the surface of the base. All that remains is to place the product inside the frame. From the wrong side we cover everything with a plywood sheet. Small nails will help secure the entire structure. Care and caution are required, otherwise the mat may be damaged.

Sometimes the cardboard is left visible. It becomes the background for the entire composition. In this case, colored cardboard is used. We cut out the silhouette according to the size of the picture with our own hands in the middle of the cardboard base. We place the resulting cardboard frame on top of the embroidery itself.

Mandatory nuances

Pictures in a frame are located strictly in the center, avoid distortions in any direction.

A good option would be to use glass to decorate the frame with your own hands. It protects the product from dust and dirt. Glass will help preserve the richness of the colors from fading.

It is important to leave a small distance between the painting and the glass so that the embroidered image does not become deformed.

We glue a frame made of wood, chipboard

Joining curly profiles into a “mustache” is one of the most important steps that must be done scrupulously.

The edges of the part are cut down with your own hands at an angle of 45 degrees.
You need to use special clamps, then the product will become more durable.

There are several ways to glue wooden frames.

Corner connection using clamps. The method is not without certain disadvantages. Not always and not everyone has the right tool.
The second option was not widely used. Use rubber tape to connect the parts. The tape itself is tied with a loop. Some skill is required to successfully complete these steps. It is important to maintain the accuracy of the angle when filing the ends.

Detailed description

Thick plywood or chipboard - an ideal option that will help you make and design a flat area without deviations in size and geometry. We use self-tapping screws to secure the support bars; they are secured along the edges.

The bars are located at an angle of 90 degrees relative to each other. A metal square will help you achieve maximum precision in your work.

Next, we take the prepared parts and file the ends. We apply glue to them that matches the workpiece, most often it is PVA wood glue. Having connected the corners of the frame, we tighten the structure with clamps. The corners of the frames should be pulled together tightly, without shifting in different directions, make sure that the structure is horizontal. The clamps are removed after the glue has completely dried, which usually takes about a day.

Rubber band and rope

We create a base with four bars, they play the role of a base. In the previous case, we only needed two such parts.

The rubber tape from the inside will tighten the corners of the frame. The use of a cable or rope is allowed.

Tightening corners with one bolt - classic version. We install stop corners on 4 slats. Creating the structure itself for tightening is the most difficult moment. This design can be used later when other frames are created.

Ceiling plinth frame

It’s easy to do without expensive materials and special skills if you need to create this option.

To work you will need:

Ruler with marker.
Substance with a coloring effect.
Miter box.
Stationery knife.
Glue solution. Without it, you won’t be able to glue all the parts together. An excellent option is the material used to glue the ceiling tiles together.
Skirting board. Polystyrene or foam.

It is necessary to carefully measure the embroidery itself in order to make the ideal frame. A ruler and marker will help you apply the required dimensions to your work surfaces. It is necessary to put all the parts together before you start gluing. The ends are cut at an angle of 45 degrees, the miter box ensures maximum accuracy.

What other options are available?

Contacting a framing workshop is the most affordable way, but not in terms of cost. It’s better to ask in advance how workers stretch the embroidery onto the backing. Stretching from the inside out with threads is the most reliable option. The embroidery is placed on a backing suitable color. On reverse side the edges are bent. The fabric stretches evenly, making the product durable. The decoration is luxurious.

Most often, workshops prefer to secure the fabric with double-sided tape, since the method described above is quite expensive and labor-intensive. From the point of view of tissue preservation, this option is not the worst. The main thing is to choose high-quality adhesive tape that does not leave marks.

Good workshops offer to cover embroideries with glass. But paintings embroidered with beads should not be covered like that. Then attractive and juicy appearance will be lost. The passe-partout should have the same tone as all the embroidery. Sometimes they make a double passe-partout to emphasize certain details.

The color of the baguette should be combined not only with the picture, but also with the surrounding interior.

You can also purchase ready-made frames. Relevant for those who want to follow the path of least resistance. You can also be puzzled by the choice of mats in stores, if necessary.

Video gallery

Embroidery is fascinating and, most often, not difficult task. A person puts a piece of his soul into every painting, from the smallest to the largest work of art, so each work is valuable in its own way. However, to decorate your home with a finished painting or give it to someone, simply finishing the embroidery is not enough. You need a frame, but not everyone knows how to frame it. From this article you will learn how to insert your own embroidery into a frame with your own hands quickly and easily.

How to insert embroidery into a frame with preparation in a master class

1) Before inserting the picture into the frame, you need to iron it from the wrong side with an iron.

2) If there is dirt on the fabric, you should wash the work with baby soap in cool water.

3) Then you need to choose the fabric for the backing. You can take regular cardboard. If desired, you can glue the embroidery using adhesive interlining, choosing a color that matches the main color of the embroidery. It is glued using an iron (you need to place it under the embroidery and iron it).

What is the ideal frame for your work?

In order for the picture to look organic, you need to take into account the theme of the work. Wooden frames are well suited for still lifes, images of animals, and historical subjects. For sea scenes, a plastic frame is more suitable; you can decorate it with shells.

The shape of the frame is also important. Frames that repeat the silhouettes of the images look good. In addition, frames can be square, rectangular, round or oval.

Then you need to choose a size. In any case, the frame should not touch the edges of the image. For small compositions, a large indentation (more than 2 cm) will be appropriate.

The color should match the shades of the image, or you can choose a classic option, for example, in the tone of natural wood or gold.

It is advisable to use a frame with glass, so it will be much easier to care for the painting, and the colors of the threads will not fade over time. The main thing is that there is a gap between the glass and the canvas. Exceptions are paintings embroidered with beads and glass beads; they will not look good under glass.

A passe-partout is not a necessary element, but in many cases it can be used to focus attention on the picture and smooth out imperfections in the color, shape and size of the frame if you haven’t found the perfect one. The tone of the mat should be slightly lighter than the frame or as close as possible to the main tone of the embroidery.

How can you stretch embroidery:

The embroidery can be stretched and secured with ordinary buttons on a piece of plywood or chipboard.
You can stretch the embroidery using glue. Glue can only be applied along the contour of the embroidery! Otherwise, you may simply ruin your work.
You can stretch the embroidery using threads. There should be at least half 2-3 cm of material left at the back. The embroidery does not need to be stretched too much, and it is also important to monitor the displacements by turning them over to the front side.

You can secure the embroidery with double-sided tape. This is the simplest method and it is convenient because you can redo the mount several times without damaging anything.

You can also secure the work on the reverse side with double-sided tape.

You can secure the embroidery with stitching. In a piece of plywood or chipboard, you first need to drill or stitch holes at a distance of about 1 cm. Next, stitch it with a “forward needle” seam.

Making an embroidery frame from a hoop quickly and easily

Ordinary hoops can be turned into an original Provence style frame.

To work you will need:

embroidery
regular round or oval plastic hoop
scissors
thread and needle
pins
fabric or canvas

We insert the embroidery into the hoop, placing additional thin fabric (you can do without it).

Cut the fabric or canvas 1.5-2 cm from the edge of the hoop. Along the edge of the fabric we pass the seam forward with a needle and tighten the seam. We disguise the wrapped fabric from the inside out by sewing a piece of fabric to the size and shape of the work with a hidden seam. If desired, decorate the frame with beads or rhinestones (glue with “moment” or PVA glue).

How to decorate embroidery in a baguette with your own hands?

This design may seem complicated and expensive, but it is not.

To work you will need:

embroidery
Frame
transparent glue moment (or double-sided tape)
Ruler and pencil
paper
scissors
floral felt or fabric

The photo frame needs to be disassembled and the embroidery glued to the cardboard using glue or tape (only the border of the canvas is glued). To make a passe-partout, cut out a frame from paper to the size of the embroidery. Next, we cut out frames from felt or fabric that are 1.5-2 cm larger than the paper frame. We glue them together, folding the indents under the paper. Glue onto the base with embroidery.