To create a Cat costume, you will need to devote a sufficient amount of time to this task. You should also pay attention to little things and details and, of course, take into account the wishes of your child. It can be either Puss in Boots or the cute cunning Basilio - you choose! The outfit will cheer up not only the child, but also you. Holiday mood will be provided!

TOCostume Cota Basilio for your child

The Cat Basilio costume will be an excellent option for children's New Year's party. This is a very effective choice, especially if your character is paired with red-haired Alice! This Cat costume will create a sensation and become a real surprise. The basis of the suit will be black trousers, and pair them with a black turtleneck or shirt. Choose shoes that are worn out rather than new. It could be old shoes. Complete the base of the outfit with decor and details to create an original DIY Cat costume. An old vest is put on the shirt, onto which patches and colored pieces of fur can be sewn. These patches are sewn on quite carelessly and chaotically. The vest will add credibility, and the Cat costume will turn out great! A black hat, preferably an old and shabby one, should be put on the child’s head. You can even cut the fields in some places. Don't forget to wear a bow tie and gloves with cut off fingers. And, of course, the calling card of any self-respecting Cat Basilio is black round glasses. They are moved to the tip of the nose. You need to make a sign and hang it around your neck. It should be signed with grammatical errors: “Give me food,” etc. So you will get a funny Cat Basilio. And remember about makeup. Draw cat whiskers for your child. Now the New Year's Cat costume is ready!

DIY New Year's Puss in Boots costume

Note that you can also create a Puss in Boots costume with your own hands. This is the image of a brave and courageous hero who will not go unnoticed. The Puss in Boots costume consists of a lot of details. For it you will need:

• green velvet (for trousers and hat);
• black velvet for camisole;
• clasp;
• lace;
• red satin for the cloak;
• velor or red leatherette for trousers;
• feather for hat;
• leatherette for buckle and belt;
• fur for the tail.

It’s not very difficult to prepare a New Year’s Puss in Boots costume with your own hands. The Cat costume must include trousers. You can sew them yourself using a suitable pattern. Green velvet breeches will also work. Decorate the bottom with an elastic band, sew the cuffs to the sleeves. To create a camisole, sew a black vest with a green insert at the front. The vest is fastened at the back with a zipper. The blouse is decorated with fluffy lace. To make a hat, you need to cut a pattern according to the diameter of the child’s head. It will be the basis for the product. To sew a hat, you should work with green velvet. Pin the feather and margins with a brooch. The cloak is made of red velvet. The boots consist of two parts: shoes (covered with fabric) and leggings. The tail is sewn to the middle seam of the trousers. You need to choose a buckle for your belt big size. So you can do it lovely suit DIY Puss in Boots. Don't forget to add the final touch - makeup. White makeup is applied in the area of ​​the nasolabial triangle, and cat whiskers are drawn with a black pencil.

A children's event is an exciting quest for mom. In a short time, you need to choose a character, think through the image, find a costume and accessories, and, if necessary, put on makeup for the child. One of the popular characters at children's parties is the cat. This can be either a stylized image of an animal, where the color, shape of the ears, length of the tail, fluffy coat and accessories depend on the taste and available materials of the creator. Or the hero of your favorite cartoon or a child’s fairy tale.

Ideas for creating a “cat” costume

Undoubtedly, the outfit should meet the aesthetic needs of the mother, but it is important to remember that the main critic is the child.
Modern children did not grow up in the times of the kind Leopold, the cunning Basilio, and the hardworking Matroskin. Therefore, the images of these characters at children's parties are losing relevance.

The current generation has its own heroes.

• Merry Korzhik, Caramel and Compote - animated series "Three Cats".
• Brave Supercat - animated series "Lady Bug and Supercat".
• Magnificent Puss in Boots - cartoon "Shrek".
• Catboy - animated series "PJ Masks".

Costume options

The basis

It is not difficult to reproduce the image. Surely the young fashionista has a red trapeze dress in her wardrobe. If not, mom will try and sew it together in a couple of hours.

To avoid fiddling with the pattern for a long time, any one is taken loose dress girls, and an outfit is created based on it. Sleeves and collar are not needed. The top can be cut figuratively or straight, then treated with bias tape to match the dress.

Reference! You can make the bias tape yourself. Cut strips 4 cm wide diagonally relative to the grain line, fold them in half lengthwise and iron.

Headdress

Big red bow and cute angular ears They will look amazing on little fashionistas. You can attach the components to the headband.

For the ears you will need fur triangles in red tones, as well as white fleece elements slightly smaller in size. The parts are laid face to face, connected to sewing machine or manually, stuffed with padding polyester. Then they are turned inside out and sewn to the rim.

Tied in the center of the headband big bow . To prevent it from falling during active games, just attach it to your ears with a couple of stitches.

The basis

Top - blue striped T-shirt or vest. If you don't have any striped items, you can sew colored stripes onto a white T-shirt.

Bottom - blue trousers or jeans. Every boy probably has one of these.

Headdress

On the head there is a cap, like a sailor's. If friends or relatives borrow it for one evening, great. If not, making it yourself is not difficult.

A rectangle 6–8 cm high, 35 cm wide is cut out of thick blue cardboard and glued into a cylinder. A white circle is also glued on top, the diameter of which is 1.5–2 cm larger than that of the cylinder. An image of an anchor is applied to the front part of the resulting cap, and two satin ribbons, 15 cm long.

In order for the headdress to hold well, you will need a thin elastic band, for which holes are cut on the sides of the cylinder. The ears are made in the same way as Caramel’s and are attached with an elastic band along with the headdress.

Top - green shirt. Bottom - green trousers. If you have old, light-colored clothes lying around at home that your child won’t wear, you can experiment and change the color with special paint for clothes.

If the trousers are a little short, no problem. Trimming them further will make great capri pants.

A green kitten's cap can easily be obtained from cotton stockings by making a cuff on them. And sew a pom-pom from knitting threads onto the tip.

It is necessary to fill the cap with padding polyester so that it keeps its shape. Or insert a cardboard cone inside. Everything, including the ears, is attached with an elastic band.

The basis of the suit is a black turtleneck and trousers, ideally tight-fitting ones.

Under the neck, at the level of the jugular notch, you need to sew an amulet, which has the shape of a ball with a diameter of 3–4 cm. It is done simply, just buy gold foil at any stationery store and crumple it into the required shape.

Ears and headband

To create a blindfold, black knitted fabric is best suited. The edges of the jersey do not need to be finished when creating the eye holes. This makes the job much easier.

For the ears you will need black felt. 4 identical parts are cut, sewn together in pairs and stuffed with a thin layer of synthetic padding. A wire is run along the contour, which will give the required shape. After the ears are formed, they are sewn on with an elastic band.

Puss in Boots

A piece of black fabric is suitable for a raincoat, which will be fastened under the neck with a button.

Reference! It is better to purchase a large button on a leg with a metallic tint. It will look better than usual and harmoniously complement the image.

To create boots from thick paper or fabric that holds its shape well, two truncated cones are cut out. The smaller base is attached to the shoe with ribbons or elastic bands. The larger one is turned away and edged with burgundy braid. The boots themselves must be black.

You need to complete the image with a sword. If you don’t find one in the toys, thick wire, foil, and a cut bottom will help. plastic bottle and a large bead for the tip. A hole is made in the center of the bottom of the bottle into which the wire is inserted. One end of it turns into a handle, and a bead is attached to the other.

Attention! No sharp objects are allowed at children's parties, so having a tip is a must!

After production, the sword is completely wrapped in foil.

Headdress

The character's ears are hidden under a black hat with burgundy trim. Finding a headdress of this type will not be difficult, but sewing on colored braid will take 10 minutes. One of the sides is carefully attached to the crown, and a large yellow feather is inserted there. Similar accessories are sold in decoration and decor stores.

Reference! A good alternative to a store-bought pen would be a homemade one. You need to cover the wire with colored tape or paper and cut out the required shape.

The toddlers' favorite is wearing a blue tight-fitting outfit, so... a turtleneck and trousers in these colors will come in handy.

To the chest line acrylic paints A white design in the form of a mask is applied to the eyes. If you don't have paints at hand, you can cut out an applique from white fabric and carefully sew it on.

We'll put a blue knitted hat on our head. Ears of similar colors are sewn onto it. Samu the hat must be chosen so that it covers the eyes and nose. After the slits for the eyes are ready, white eyebrows and stripes are carefully drawn on the sides of the head and on top, just like the young hero.

An important detail of the costume is the tail.

• For Caramel, Korzhik and Compote, the tail design is the same. A fur or fabric strip with a pile is folded in half, stitched on both sides, and lightly stuffed with synthetic padding. It is better to connect Caramel's tail with the girl's tights so that it protrudes from under the dress. For Kompot and Korzhik, the tails are attached to the belt.
• . Slim and a long tail It will work great from a black stocking, which is stuffed with padding polyester and then attached to the belt.
• Puss in Boots. The removable fluffy collar also makes a great tail, similar to a fur one.

Reference! To ensure that the hero's sword is always with him, you can thread a hair tie into the belt.

• . The tail is sewn from blue jersey, decorated with light stripes and lightly stuffed. You can sew it to the waistband of your trousers.

Useful tips for creating a cat costume

• Don't fill the tail too tightly, otherwise it will lose its mobility and softness.
• With ears it’s the other way around; the more densely they are stuffed, the better the shape is maintained.
• Every character needs gloves. It is advisable that the accessory matches the suit. Nails are painted with acrylic paints, or felt triangles are sewn onto the fingertips;
• Eye pencil can be used to draw a beautiful mustache- an important attribute of any cat.

Children's activities are designed to spread joy. If you see that the baby is in the image of his favorite hero, with a sparkle in his eyes and a happy smile, then mom did everything right!

You have not yet decided which carnival costume you will wear to the matinee dedicated to the upcoming 2020 New Year, in kindergarten or your son's school? Often boys appear at such holidays in the guise of pirates, robbers, and musketeers.

The hero of Charles Perrault's fairy tale, as well as various cartoons and films, Puss in Boots, is also popular. Smart and enterprising, brave and charming, many guys like him. Sewing such an outfit is not as difficult as it might seem at first glance.

DIY Puss in Boots costume for a boy

To make your own Puss in Boots costume for a boy, you will need a shirt, trousers or breeches, a cape, a wide-brimmed hat and boots. As for color, the predominance of red is not at all necessary; the suit can be made in both blue and green colors.

The easiest way to create such an outfit is from things available in the house. A bright mother's blouse with a belt or a belt is suitable for him. You can wear regular trousers, make a hat from your dad’s old hat and pin a feather on it.

Can you make an outfit like this? It requires a satin white shirt with a large collar, puffy sleeves or sleeves that look like truncated cones. Trim the collar and cuffs of the shirt with lace. Or cut out lace from thick white paper (like paper napkins).

Both classic-cut trousers and narrow ones, reminiscent of leggings, or wide breeches are suitable for a cat. It is better to sew this part of the costume from satin or velvet. You can insert an elastic band into both legs, moving a few centimeters from the bottom, or insert it at the bottom of the trousers. Another option is to sew cuffs to them.

To make a camisole, sew a black vest with a green panel at the front. The vest is fastened at the back with a zipper. This character will also need a wide belt with a buckle.
Make a pattern for a raincoat carnival costume Puss in Boots is quite simple.

You will need two measurements - the circumference of the child's neck and the length of the product. Since the cloak will not be completely cut like the sun, we add 5-7 cm to the neck circumference. We calculate the radius: R= neck circumference/2π.
Draw a circle on a piece of paper. We add the length of the cloak to the radius and draw the lower circle from the same center.

Cut out both circles. Mark a sector equal to one quarter of the circle and cut it out. Using this pattern, we cut out the fabric and sew the product. We trim the edges of the cloak and the neckline with bias tape. To make the corners of the cloak easier to handle, you can slightly round them. Sew ties to the neckline.

It’s even easier to sew the next cape model. Cut a rectangle from the fabric, the length of which is equal to twice the length of the product, and the width is slightly greater than the width of the child’s shoulders. Trim the edges of the rectangle with lace. In the middle, cut a circle with a diameter of 15–20 cm for the child’s head and trim it with edging.

This element of a Puss in Boots costume for a boy can also be a long sleeveless vest or a wide blouse with cut sleeves. Satin or artificial silk is better suited for it.

Over the knee boots for Puss in Boots can be made from children's boots by attaching wide cuffs made of fabric to match the shoes to their upper edge. They are usually made in the shape of truncated cones with wide bells pointing downwards.

If the outfit includes wide breeches with elastic at the bottom, then you can do without boots. Breeches are worn over golf, and shoes can be worn with boots or shoes with buckles. Another indispensable element of the Puss in Boots fancy dress costume is a wide-brimmed hat, which you can also make yourself from cardboard.

After measuring the circumference of the child's head, draw an oval of the appropriate size and a hat rim on cardboard. Then draw the brim of the headdress and cut them out. Using a glue gun, glue the parts together. Paint a cardboard hat with black paint, cover it with colored paper or fabric and decorate it with a feather.

If you couldn’t find a natural feather, you can make it from paper. Having cut out the outline, you need to make frequent cuts along its edges and fluff them up. The feather is sewn onto the hat or secured to it using silicone hot glue.

Instead of a hat, the Cat can wear a hat with ears made of fabric or fur to match the color of the rest of the outfit. Or you can attach the ears to a plastic hairband.

Draw the outlines of the ears on paper in the form of two triangles, one of which is 0.5 cm larger than the other on both sides and 4 cm on one, and then transfer the pattern to the fabric.

Cut out a black and white ear from fabric. Turn the pattern over and cut out the second pair of ears. Place the white triangle on the wrong side of the black one and tuck the edges of the black one 0.5 cm on both sides.

It is better to make the ears for Puss in Boots from a dense material that holds its shape well, for example, from felt. If the fabric is not very dense, insert a rigid base inside the ears, for example, a cardboard triangle, pieces of foam rubber or padding polyester.

Wrap the ears around a plastic hoop and secure it on the outside with threads or glue it with PVA glue. You can also cut ears from faux fur.

Another necessary detail of a Puss in Boots costume for a boy is the “tail.” It can be done different ways, for example, sew a long thin faux fur cover and place wire inside. Or take three tubes made of cardboard (you can use a roll toilet paper), black stocking or golf, small piece faux fur.

Place the tubes in a plastic bag and wrap tightly. Then place the workpiece in the stocking and use a stapler to adjust the lower part. To make the tail hold its shape better, you can insert a wire inside it.

To make it swing from side to side, you can place a small weight at its tip. The tip of the tail can also be decorated with tinsel or a piece of fur. All you have to do is fasten the tail to your belt.

And this self-created image of Puss in Boots for a boy will be completed with appropriate makeup: white makeup is applied in the area of ​​the child’s nasolabial triangle, and a black nose and mustache are drawn with a cosmetic pencil.

Break a lot of Internet links, sensible and understandable instructions for sewing boots for New Year's costume I didn't find the pirate. I had to reinvent the wheel :). After analyzing the passages and putting them into pieces, I came up with this option.

These are not boots in their purest form. This is their imitation. I don’t have the opportunity to study leatherwork, so I sewed only the tops of the boots, which, having a lining with an elastic band inside, fit the leg perfectly tightly, do not slip, do not interfere with the child’s movements, and, in combination with black Czech shoes for 100 rubles, vaguely resemble boots: ). In my version, buckles on the insteps are also planned, but they are still in the process, in finished form I’ll show you the boots in the next report on .

So, step number 1. Pattern.

I took several measurements: height from ankle to knee, ankle circumference, calf circumference.

At first Bottom part It turned out to be narrow, I had to adjust it in the process. I forgot seam allowances here and there, so don’t pay attention to the numbers on the pattern.

First, we draw an inverted trapezoid, to do this we draw a line equal to the circumference of the ankle + 5 cm (it will be close, but the leg will fit); set aside the height of the boot - our measurement is from ankle to knee; and the upper part of the pattern, equal to the circumference of the calf + 5 cm. If you need boots with a lapel, like mine, add another lapel length in height (I have 7 cm).

The square in the photo is a blank for a buckle measuring 5x5 cm.

We also cut out a “skirt” for our foot, which will cover the shoes. I drew it “from a lantern”, the shorter straight line is 5 cm, the longer one is 7 cm. The inner edge is equal in length to the lower part of our trapezoid, since it will be sewn to it. The photo shows half of this part.

We cut everything out; we made 2 pieces each from black faux leather.
Cut the pattern along the lapel line. Along the top part we cut out two more leather parts. on the bottom - 2 parts made of lining fabric.

These are the details we have prepared.

Step 2. Sewing. Stepping back 2 cm from the wide part, sew an elastic band from the inside of the lining fabric.

Sew along the longitudinal seams on the lining.

We sew longitudinal seams on the details of the boot and lapel.

Sew the lapel to the lining.

Front view.

View from the reverse side.

We take two parts, the lining inside out, the shaft facing out.

We put the bootleg inside the lining and stitch it.

As a result, these are the “pipes”.

We attach the “skirt” previously sewn into a ring.

We give our pipe the shape of a boot by tucking the lining with the lapel inside the boot. We stretch it onto a jar of suitable volume (I have a glass from a blender) so that the seams along the fold lie the way we need. I held each boot taut for about 20 minutes. At each stage, I ironed all the seams through a cotton cloth.

One of my favorites fairy-tale heroes is Puss in Boots. Both adults and children love to dress up in it! That's why the puss in boots costume is so popular today.

Buy or make it yourself?

No one will give advice here. Because there are many options for puss in boots costumes.

You can put together an outfit from what you already have, making some adjustments: add cardboard bells to boots, a feather to a hat, make a cape with an ornate brooch from a bedspread on a chair, attach a large buckle to a wide belt. And on your face it’s enough to apply makeup in the form of a cat’s face.

But you can approach creating an image more seriously. Then the puss in boots costume must be made realistically. In this case, a jumpsuit made of fleecy fabric is worn on the body of the person portraying the character. You will also need to put a mask on your head, which will imitate the face of a real animal.

It’s quite difficult to make such a puss in boots costume yourself. But even here, many prefer to do it on their own. How to make a puss in boots costume with your own hands is described below.

Overalls pattern

Let's say you decide to sew a puss in boots costume with your own hands so that it can be used as a life-size figure. Here you can’t do without patterns for overalls.

The fabric must be fleecy, soft, red or brown colors. It’s great if you’re lucky enough to find fabric with colors that imitate a cat’s skin: with randomly located stripes and stains.

You will also need a piece of lighter or white fabric to insert in the front. It will imitate a cat's tummy.

A wire is inserted into the tail so that it does not hang with the stocking down, but can be given shape.

Puss in Boots Mask

As mentioned above, you can use makeup for a quick outfit. But it will be better if you make your own puss in boots costume with a mask. There are also several options here.

You can make a simple half mask - glasses with ears. Whiskers on the cheeks are drawn with a cosmetic pencil or eyeliner. Makeup is applied to the tip of the nose.

You can use store-bought masks for the entire face or make one yourself. To do this, a cardboard oval is painted, cutouts are made for the eyes, and ties are attached to the sides.

Often, three-dimensional masks are made for the New Year's Puss in Boots costume.

• For them, you first need to make a template from plasticine. Sometimes used for these purposes salty dough, clay or gypsum. Then you need to wait for the template to dry completely. Only after this can you start working.
• Pieces of paper are glued onto the template using paste in several layers. Although you can use other glue, it will not be economical.
• After hardening, the mask is removed from the template.
• Don't forget to drill holes for the eyes and secure the ties. This technique is called papier-mâché.
• To ready product It was easy to remove from the template; the first layer of paper is applied without glue, moistening them with plain water.
• Using the same algorithm, masks are made from gauze or other soft fabric. But the material does not need to be specially cut. Layers are laid out from those pieces that are on hand.
• Fabric molded masks and papier-mâché products are painted after hardening.

The sewn helmet masks look very nice. It is best to make them from foam rubber. The master class with step-by-step photos shows in detail the algorithm for making such a helmet.

The joints of the parts are connected with glue, carefully applying it to the foam rubber. The parts are cut out with a blade.

The finished helmet can be painted or covered with fabric to match the overalls, trimmed with pieces of fur.

Puss in Boots Hat

The main attribute of this character, of course, is high boots. But also in children's costume Puss in Boots plays an important role.

It’s good if you have a similar headdress at home. But don’t be upset if you can’t find a hat even on the mezzanine. It can be glued together from cardboard and painted black.

Cape for Puss in Boots

A flowing cloak, tied under the chin, can be sewn from a rectangular piece of fabric. One side of it is assembled onto a drawstring into which a string is inserted for tying.

You can go the other way: gather one edge and process it with binding. This will be the neck of the cape. This version of the raincoat is safer: you don’t need to worry that someone will pull the string and the baby will suffocate. Sew on one side of the neck big button, on the other they make a loop.

Sword for Puss in Boots

Weapons of this kind can be bought in the children's toy department. But if you decide to make a sword yourself, you need to think carefully to make this attribute safe.

It is recommended to make imitation weapons from newspapers. For a long time knitting needle strips of paper are wound so that each subsequent turn mostly overlaps the previous one. The tip of the strip is glued. Then the second strip is wound in the same way. You need to first secure the initial tip with glue.

When ready, remove the knitting needle. You can paint this part with paint: yellow, white or metallic.

At one end of the resulting tube is attached one of the metal lids for jars, which are used to seal canned foods. You can weave a beautiful handle from soft wire in colored insulation.

So your wonderful and safe sword is ready! Although the child should still be explained that there is no need to swing this weapon too much: it can hit a friend in the eye and cause injury.