How to knit double mittens. Knitting mittens: description and diagrams. How to knit baby mittens with knitting needles

Delicate, warm, comfortable, stylish knitted mittens - what else brings so much inspiration to needlewomen in winter? Moreover, both the process of knitting mittens and the result obtained at the end are beautiful. Knitting this accessory is quite simple, and it will look exclusive. If you know how and love to knit, and at the same time want give your loved ones an exclusive gift for New Year – there is no cooler idea than making mittens with knitting needles: descriptions and diagrams are already waiting for you on this page, as well as exclusive video tutorials.

Beautiful mittens with a pattern are a unique, and most importantly, warm find for those who like to look unusual. Of course, today almost any item can be bought in a store, but for your own model of mittens you can choose the yarn yourself, choose a pattern and chicly decorate your pair of mittens with the decor you want. Of course, such a designer model in the store will not be cheap, but you can make it yourself.

Before you begin work, you should carefully measure your hand so that your future product looks perfect.

What measurements should you take before knitting mittens?

Girth of the hand along the line running from index finger to little finger(we run a measuring tape along the bones).
From the beginning of the hand to the tip of the middle finger.
From little finger to wrist. The length of the thumb is also taken into account.
We measure distance between thumb and wrist.

You also need to choose the appropriate size for your future masterpieces. There is a special mitten size scale for men, women and children.

When you calculate the size of the mittens and measure your palm, you should take into account the thickness of the yarn and the size of the knitting needles. If the knitting is quite dense, then a little more yarn is needed: when knitting mittens with plaits or braids, we take 30-40% more yarn e, than is required.

The yarn is calculated as follows:

for women's mittens - 100-120 g of yarn;
for children - 60-70 g of thread.

The table shows how many stitches you need to cast on to knit certain mittens. We start knitting with a brush and knit in the round on 5 knitting needles . We knit the cuffs with an elastic pattern– through one front and one purl loop or 2 through 2. Let's move on to the instructions for knitting a mitten cuff for beginners.

Loops we cast on on 2 knitting needles.
Then divide the number of loops into 4 parts(equally) and throw on the knitting needles.
Row of loops close it in a circle and tie the ends threads together.
The cuffs will be 5-7 cm.
After you tie the cuffs, add one stitch on each needle.
We knit the main part of the mitten to the thumb area.

Knitted mittens with a pattern: diagrams and step-by-step instructions

Now that you know how to take measurements correctly and knit cuffs, you can move on to considering the pattern of mittens with knitting needles with a pattern.

Beautiful patterns on mittens are not just for women. Men's mittens with a pattern also exist, and they look impressive and stylish.

Unusual New Year's mittens will give you a festive mood.

Let's take a closer look several stylish schemes.

Mittens with braided knitting needles: diagrams and description

In the process of knitting mittens, it is very important to position them correctly. thumb. Thumb hole for right mitten will be on the third spoke, for the left - on the fourth knitting needle. In the photo you can see small master class on finger knitting (one of the options).

We knit a hole for the finger. On each knitting needle you have the same number of loops, for example, 12. We knit the first loop on the third knitting needle, and pin the next 10.
On right knitting needle cast on 10 chain loops(the same number of loops you removed on the pin). We knit the final 12th loop.
Knitting in circles to the level of the little finger.
Reduce the number of links: on the first and third spokes knit with a shift of 2 loops(beginning), and on the second and fourth knitting needles we knit 2 joint loops for the 2 upper parts (end).
On every spoke reduce the number of links (through the row), until half the stitches remain on each needle (from the original number). Reduce the number of loops in each row.
When you have 8 loops left, close the ring and tighten from the inside out.

Knitting the thumb

We transfer the removed loops to the knitting needle.
When we knitted air loops, we also got edge loops. We recruit from them new loops in multiples of 3.
Distribute the loops onto 3 knitting needles and knit in the round to the tip of the nail. We decrease the loops as described above (in step 4).
We collect the last 6 loops and tie them from the inside out.

These 2 patterns will help you master the technique of knitting with braids.

Here is another option for knitting mittens with a braid pattern - cute owl – for girls.

Elegant women's mittens with flowers can be knitted for free using this pattern.

How to knit baby mittens with knitting needles?

Perhaps every mother wants to learn how to knit mittens for children. This is another sure way to give your child your love, care and warmth. Children's mittens are even easier to knit than adults, because they are smaller in size.
Instructions for knitting children's mittens will explain to you all the nuances of the work. This method knitting is considered the simplest and most versatile, and the mittens are suitable for a child of 7 years, and for 2 years, and for 1 year (see size table).

And this one set of children's patterns will complicate your task a little, but will cause a storm of positive emotions in your baby.

This is what tender and cool “hedgehog gloves”. From the front they look quite neat, but on the back of the hand there are soft “needles” made of threads, and on the fingers there is a hedgehog’s face. This photo shows a detailed MK.

It should also be clarified how to finish work.

First way. To round the toe, decrease stitches at the end and in the middle of each needle. We close the last loops into a ring and pull the thread from the wrong side.
Second way. On the first and third knitting needles we knit every two first stitches with a shift. At the same time, we pull one loop through the second. On the second and fourth needles we knit the last two stitches together.

And according to this scheme you can knit mittens on two knitting needles.

This manual contains detailed description, how to knit a finger in an accessory such as seamless mittens.

Jacquard patterns also welcome on children's mittens.

Knitted on 3 needles cute fox mittens. Your child will love this new cozy friend.

You are such a beauty can be knitted on 5 knitting needles.

Popular today mittens with Indian wedge.

Children's mittens with ornaments look laconic and stylish.

Knitting mittens: beautiful patterns with knitting needles

We continue the interesting topic of knitting mittens and mittens. We have prepared for you several more ways to knit mittens.

- to stay closer friend to friend.

Instructions

Start knitting the regular (top) stitch for the left hand. To do this, you need to cast on the required number of stitches, dividing them equally for each of the four double needles. Select the size of the future double individually. The easiest way to refine it is to knit several rows with an elastic band and pull the unfinished sample onto your palm.

Having specified the size of the double mitten, knit an elastic band 1x1 (one front and one back) or 2x2 (two front and two back) about seven centimeters in height. Next, perform the first circular row with knit stitches in stockinette stitch); in this case, it is necessary to add one loop on each working needle.

Tie the circular fabric to the beginning of the thumb and remove several open loops, threading them onto a pin. Also measure the required hole size for subsequent fingering individually, calculating the knitting density.

Next, you need to tie the mitten to the level of your index finger and turn the unknitted product inside out. Now pick up stitches along the edges of the elastic band of the outer mitten to work on the inner lining piece. To do this, thread a thread from the edge of the work, tie it in a knot and pull out the loops, stringing them onto working needles.

Perform the mitten-“”. After finishing the work, also on the tip of your index finger, close the toe of the product. To do this, you need to remove each last loop of the circular row onto the next working needle and knit it together with the next loop. As a result, you should have one loop on your knitting needles (four in total).

Pull the thread through the remaining open loops and pull it tight. Using a hook, the thread must be pulled to the wrong side of the work. Finish knitting the top of the front mitten in the same way.

Next you need to tie your thumb on one and then repeat on the other mitten. Make sure that the inner and outer fingers are perfectly sized. It is convenient to first make the inner finger, insert it into the hole for the outer finger, and then tie it.

Proceed with your finger like this: string the loops set aside on the pin onto the knitting needle; add the same number of air loops and a couple of side loops. Distribute them evenly on three working needles and make circular rows to the middle of the nail. When knitting the top, cast off one loop in each row until only a couple of loops remain on the knitting needles. Tighten the toe with thread.

Perform the second, right, double mitten in the same manner. When finished, carefully insert the inner mitten into the outer one, carefully straightening out all the folds. For ease of use (so that the lining part does not slip out of the front part every now and then), make a couple of invisible stitches on the tips of the fingers and the toe of the product, fixing the parts.

Current models of children's knitted mittens. Description and schemes of work.

Winter with frost and snow gives a lot of joyful emotions while playing with children. Parents are concerned about maintaining the health, warmth and comfort of their children, in particular about their hands.

Even if a child does not like wearing mittens and gloves, handicraft mothers come up with options for knitted warm products.

In action are:

yarn color and texture combinations
patterns and ornaments on the canvas
decor with beads, ears, eyes, buttons

About the most good options knitted mittens for children and we will talk about them in the article.

Mittens with braided knitting needles for children 5 - 10 years old: diagram, description

children's mittens and hat, knitted braid pattern with shadow

Braids on mittens add originality to the product and add warming properties.

For work, choose yarn with wool and knitting needles whose diameter is equal to the thickness of the thread.

Before starting knitting:

take measurements of the child’s hands, draw a diagram of the mittens
knit a pattern from an elastic band and a pattern with braids
determine the knitting density
convert cm values to loops

We offer as an example knitting mittens with braids for a teenager:

cast on 52 loops and perform 20 rows with a 2x2 elastic band,
in the last row add 2 loops,
knit a braid pattern according to the pattern added at the end of the section,
from the 10th row, add loops for the thumb branch - 2px3p, 3px3p, 2px3p. Do all of them with facials,
slip the thumb stitches onto a free knitting needle or pin, add 2 stitches and continue knitting the mittens in the round with a braid pattern,
At the height of the tip of the little finger, begin decreasing the loops at the beginning and end of both parts of the fabric. Your fingers should form a triangle,
Pull the final 4 loops with thread, cut it and hide it from the wrong side,
return to the auxiliary needle with the stitches set aside, pick up 2 loops and knit in the round,
at the height of the beginning nail plate with your thumb, divide the fabric into 2 parts and close the loops at the beginning and end of each,
Pull the final 2 loops with thread, remove its tip to the wrong side,
do the same work on knitting the second mitten.

Knitting patterns for mittens and patterns with braids are below.

braid patterns

knitting pattern for mittens with braids

Knitted owl mittens for girls: diagram, description

ready-made mittens with an owl pattern are worn on the girl’s hands

Warm and interesting mittens with owls on the front side are easy to make even for needlewomen with minimal experience.

Before starting work, complete all the preparatory steps as in the section above.

For mittens with owls, prepare:

wool yarn
5 garter needles with different diameters and thread thicknesses
auxiliary knitting needle
hook
contrasting thread for embroidering eyes and beaks of owls

Note:

for a small child, knit straight fabrics of the palm and thumb,
The front side of each mitten is a background of purl loops. Knit owls on it,
Instead of embroidering eyes and beak, sew beads that match the color and shape.

The actual knitting patterns for the owl pattern and the pattern for making it in a contrasting color are presented below.

Scheme of drawing an owl with knitting needles with decoding of symbols

owl pattern on a mitten for embroidery or jacquard knitting

And also a detailed description of knitting mittens with owls.

description of the work on creating children's mittens with an owl pattern using knitting needles

pattern diagram and description of knitting mittens for children with knitting needles

Double knitted warm mittens for girls and boys from 1 to 10 years: description

ready-made gray-white double mittens for baby, knitted

Warmer models of knitted children's mittens are double ones. But before you start creating them, think about the appearance.

To ensure that the baby puts on and wears them with pleasure, handicraft mothers choose:

combinations of yarn colors with imitation of cartoon characters
unusual patterns reminiscent of animals and birds, for example, owl braids
simple knitting of two mittens different colors followed by putting them on one another in the child’s arms

Having determined the knitting density and drawn a diagram of the mittens, get to work.

A special feature of the double model is the seamless knitting of the top and lining. That is, first you work on the front mitten, and then on the inner, purl one.

cast on the loops on the auxiliary thread and insert it in the place for knitting the thumb. Then it is convenient to pull it out, and transfer the open loops to the knitting needles and continue knitting,
knit the inner mitten using stockinette stitch in a mirror image of the outer one. That is, place your thumb on the same side.

Job description for double mittens for boys, take, for example, from the picture below. But be sure to continue either knitting the inner mitten from the elastic, or pick up stitches for a new work.

description of knitting mittens for a boy

For double mittens, girls will want brighter yarn tones. And the knitting process itself is similar to that discussed above in the figure.

Mittens with knitted patterns for girls and boys: diagram, description

ready knitted mittens for children with a "cockerel" pattern

Things with ornaments are a classic in knitting. In this case, you will like the mittens:

for kids - a durable pattern that does not interfere with bending their arms during games and walks
mothers - for flights of fancy in choosing a design and beauty finished product

There are as many children's patterns for ornaments for mittens as there are handicraft mothers. As an example, here are a few interesting ones.

children's patterns for mittens and patterns for them, option 1

children's patterns for mittens and patterns for them, option 2

children's patterns for mittens and patterns for them, option 3

Knit mittens with an ornament for your child, focusing on the following description of the work:

description of knitting children's mittens with ornaments, example 1

description of knitting children's mittens with ornaments, example 2

description of knitting children's mittens with ornaments, example 3

Knitted hedgehog mittens for kids made from grass with description

gray hedgehog mittens knitted for a child

Original hedgehog mittens will warm your hands and delight kids with their interesting look.

Knitting with knitting needles of this type is not particularly difficult, but requires care and patience

You will need 2 types of yarn of a similar shade - regular and grass.
After taking measurements of the child's arms, drawing the pattern and completing the knitting pattern, start creating the mittens.
Knit them using knitting needles in any way convenient for you without patterns using regular stockinette stitch.
On top of the row where the elastic band goes into the knit stitches on the outside of the mitten, cast on the loops with weed. Use the hook to lift them. Gather on knitting needles.
In total, the number of grass loops is equal to 2 knitting needles of the knitted fabric plus 4 for rounding.
Connect the beginning and end of each front row with the main fabric of the mitten.
Sew the last row of “needles” to the finished mitten and cut the thread.
Crochet the ears. They are semicircular and slightly elongated upward, located after the end of the spiky hair, and not in it.
Using black or pink yarn, embroider a nose for the hedgehog and add eyes. Ready-made elements made of plastic or crocheted.
For greater resemblance, sew decorations in the form of apples and leaves on top of the grass.

See below for a detailed description of knitting hedgehog mittens.

description of the work on knitting hedgehog mittens for children

Knitted mouse mittens for kids made from grass: diagram with description

funny pink mouse mittens for girls made from grass, knitted

Toddlers and preschoolers will love these fluffy mittens with a mouse face. The presence of “grass” makes them soft and pleasant for little hands.

Prepare:

regular yarn and “grass” 50 g each, if you plan to knit mittens for a child 3-4 years old
scarf knitting needles with a thickness equal to the diameter of the thread
leftover black yarn for embroidering a nose
hook
black beads for mouse eyes

Operating procedure:

knit mittens according to the pattern that is most understandable to you,
after finishing the elastic band on the product, move on to the “grass” and stockinette stitch,
continue knitting until the stitches on the main fabric of the mitten begin to decrease,
return the regular yarn and decrease 4 stitches in each row at the beginning and end of 2 wedges, or alternate rows of decreases after one,
tie your thumb,
repeat steps to create a second mitten. Be careful where you place your thumb on it,
The mouse's ears are rounded and extended upward. Therefore, crochet them from 4-5 chain stitches and 2 rows of single crochets. Place the top row not above all the columns, but only above the central ones,
sew on the ears and eyes-beads, embroider the nose with black yarn,
for greater resemblance, crochet the tail of the mouse using air loops and sew grass in the first row on the outside of the mitten.

Transformable mittens with folding knitting needles for girls and boys: description

blue transformable mittens knitted with a convertible top on the hands of a boy

Active children sometimes need to reach their fingers when playing or answering the phone. It’s so inconvenient to take off the entire mitten and then put it on again. The solution is to knit mittens with a folding top for your child.

Outwardly, they resemble mittens with a cap that is attached to the outside of the fingers. Another difference is that they have a connected thumb house.

To knit transformable mittens, choose interesting patterns, for example, from braids or voluminous “rice”.

The preparatory steps are similar to those discussed in the sections above.

Operating procedure:

Since the base of the mittens is the mittens, the beginning and end of the main fabric is made up of an elastic band. Its height is greater at the bottom,
leave 8-10 stitches for the thumb and knit in the pattern until the bend of the little finger,
change the pattern to a 2x2 elastic band and continue working until the beginning of the nail plate on the little finger,
at the level of the knuckles, lift loops from the main fabric in the amount of 2 knitting needles and add the same number minus 4,
on the inside of the palm, knit loops with an elastic band to a height of 1-2 cm, then go to the front stitch,
continue knitting in the round to the tip of the little finger,
decrease the loops in your usual way,
tie your thumb either after completing the convertible top or before starting work on it,
repeat the steps for the second transformable mitten.

Knitted fingerless mittens for girls and boys: description

knitted mitts on the hands of a boy

The mitts are comfortable with a combination of warmth for the palm and free fingers for games, work, and communication on a smartphone.

Craftswomen knit mittens for girls and boys:

to the middle of all fingers
with thumb hole
in one piece as a continuation of the sleeves
openwork, braid patterns, with jacquard motifs

Choose the color of yarn that suits your son/daughter with the rest of your wardrobe and get started.

Below is a description of knitting mitts. Reduce the number of loops and rows in proportion to the measurements of your child’s hands, select other patterns and colors of yarn as desired.

description of knitting women's mitts, option 1

description of knitting women's mitts, option 2

How to knit mittens for newborns?

Knitted colored mittens for newborns

Young parents protect newborn babies from the frosty air as much as possible. For them, mittens are easy to knit with knitting needles, since the thumb does not need a separate location. That is, all the fingers are placed together.

Mittens for newborns are a kind of warm scratchers.

You will need:

yarn 100% wool or with a maximum wool content - 50 g
set of knitting needles for circular knitting
hook

Operating procedure:

cast on a number of stitches that is a multiple of 4,
distribute them on 4 knitting needles and knit the first 10 rows with a garter pattern,
After 5 rows, alternately tie 2 together and yarn over in a circle. These holes are needed for the lace, which you will use to secure each mitten on the baby’s handle,
go to the front stitch and after 20 rows make shortening loops to round the product,
Pull the final 2 loops with thread.
Knit the second mitten in the same way.
Crochet 2 chains of 30 chain stitches each.
Carefully insert each of them into the holes in the mittens.
If desired, sew a lining for the mittens from cotton fabric.

How to knit two-color mittens for a girl and a boy?

two-color ready-made children's mittens knitted with knitting needles

The procedure for knitting mittens using knitting needles from 2 colors of yarn is similar to one-color. But there are many more combinations and weaves of yarn.

Needlewomen, depending on their imagination and knitting skills, choose:

simple alternation of colors, for example, in the form of horizontal stripes,
jacquard designs, when the outside of the mittens is decorated, for example, with butterflies, deer, snowflakes, snowmen, bullfinches, and on the inside - the colors of the yarn alternate through 1 loop or with vertical stripes,
embroidering finished mittens with a thread of a different color. At the same time, they imitate knitting a loop, marking both parts of it with contrasting yarn,
insert the second yarn only on the elastic band, thumb and tip of the mittens.

For inspiration, we will insert a few photos of finished works for a boy and a girl.

ready-made two-color children's mittens, example 1

ready-made two-color children's mittens, example 2

ready-made two-color children's mittens, example 3

ready-made two-color children's mittens, example 4

ready-made two-color children's mittens, example 5

ready-made two-color children's mittens, example 6

Knitted minions mittens for boys 1 - 10 years old

ready-made knitted minions mittens for boys

A boy will like mittens that resemble cartoon characters, especially if he refuses to wear the usual models.

Funny mitten minions to knit for a beginner needlewoman.

You need:

yarn yellow and blue colors, a little black
knitting needles and hook
needle with large eye
ready-made bead eyes or a little time to crochet them

Features:

The mittens consist of the main yarn colors of blue and yellow. The first one makes up the elastic band and bottom part canvas, the second - the upper and thumb,
Insert the black strip at the end of the thumb before the mittens begin to decrease. And also embroider the top of the finished product, imitating the hair of a minion,
on the back side on top of the black stripe, sew on the eyes and add a smile with black yarn,
to insulate the mittens, knit the lining, continuing to knit the finished ones in a mirror order. Then tuck the lining inside each minion.

What pattern to knit white and black baby mittens with knitting needles?

white mittens for children with braid and rice patterns

Knit white children's mittens with the following patterns:

voluminous
openwork
braids
diamond with rice
garter stitch
stockinette stitch

Black mittens hide patterns, so be careful when choosing the latter. Pay attention to:

purl and front stitch
garter stitch
combination with white yarn and jacquards
large braids

Children's chanterelle mittens knitted: diagram with description

cute chanterelle mittens for a child, knitted with knitting needles

Continuing the theme of animals on children's mittens, let's turn your attention to foxes. Needlewomen knit them in different ways, trying to please children with a warm and cheerful thing.

Let us conditionally divide the techniques for knitting chanterelle mittens into 2 categories:

simple
advanced

In the second case, you have individual elements:

the tail is the thumb
head with ears and eyes - sewn on top on the back of the mitten
2 paws - hanging under the head. Some models do not have them, this is optional.

For a detailed description of knitting chanterelle mittens for children, see below.

description of knitting children's mittens-foxes with knitting needles

Knitted children's mittens with bullfinches: diagram with description

knitted lilac mittens with bullfinches for girls

One of the winter birds that stays with us in the cold is bullfinches. Even if your winter is milder, warmer and without them, knit mittens for your child with their portrait.

Needlewomen knit such mittens with knitting needles in 2 ways:

bullfinches are knitted using knitting needles according to the pattern
create individual parts of the bird’s body by crocheting from multi-colored yarn and then sewing it to the finished product

The first option is good for mittens for teenagers and older. For a very tiny hand, for example, a 5-year-old child, such painstaking work on a drawing may turn off the needlework mother due to the length of knitting.

Therefore, a good alternative is the second option for knitting bullfinches. And the birds turn out to be more voluminous in this case.

Knit mittens using any of the previously discussed methods or the one that is closer and more understandable to you personally.

For girls, add delicate holes in the elastic band of the mittens. Thread crocheted laces with fur pompoms at the ends through them.

In the version of mittens for a boy, make a drawing of bullfinches with a laconic branch and/or a couple of rowan berries.

The knitting pattern for the bullfinch pattern is below.

pattern for knitting a bullfinch pattern with knitting needles for children's mittens, example 1

pattern for knitting a bullfinch pattern with knitting needles for children's mittens, example 2

This pattern is suitable for crocheting.

pattern for crocheting bullfinch elements for children's mittens

Detailed job description:

description of the work on knitting children's mittens with bullfinches

Knitted baby cat mittens: diagram with description

funny cat mittens, knitted for children

Before you start work, decide on appearance mittens:

they will have a cat design
have the appropriate form

In the first case, find a design that you want to transfer to mittens for the child.

For example, these:

pattern for knitting cats on mittens for children, option 1

pattern for knitting cats on mittens for children, option 2

pattern for knitting cats on mittens for children, option 3

In the second case, decide on color scheme mittens. For example, you should end up with a striped smiling cat. Then knit the mittens with knitting needles, alternating strips of yarn. But make the toe in one color so that you can embroider eyes, a nose, a mustache and a smile on it. On both sides of the toe, tie the cat's ears with the second color.

Take any of the above descriptions of knitting mittens for children as a basis, just add a pattern of cats or give them the appropriate shape.

How to knit scratchy mittens for newborns?

knitted scratch mittens with a braid for a newborn

Scratch mittens without a thumb are suitable for the smallest babies. This fabric is easy to knit even on 2 knitting needles.

We discussed in detail the description of knitting scratch mittens for newborns in the section above.

Note that in addition to the front, back and garter stitch, braids are also suitable for decorating small mittens.

Children's paw mittens knitted: diagram with description

paw mittens in a knitted set for a child

For children who love cats and cat themes in their wardrobe, knit mittens with paws.

You need:

dark yarn 70 g and white yarn 20 g for paws
set of knitting needles
remaining yarn of any contrasting color
hook
scissors
needle with thread the color of the main yarn
flexible meter or ruler

Description of work:

take measurements of the child’s hand, knit a sample of the fabric with an elastic band and the main pattern, draw a diagram of the mittens indicating cm and the number of loops,
cast on the required number of loops, distribute them on the knitting needles and knit in a circle with an elastic band to a height of 7-8 cm,
go to the main pattern and, if desired, to knitting needles of larger diameter,
mark the place for the thumb by knitting loops with a contrasting thread,
At the height of the tip of the little finger, begin decreasing the loops. Since the cat’s paws are more oval than triangular, knit 2 loops together for the entire row. After a row without decreases. The next one is again 2 loops together,
Tighten the rest of the loops with thread. Hide its end inside the mitten,
crochet chains of air loops using white yarn. Carefully roll each one in a circle to form the base of the foot and the pads of the toes.
Either connect the chains into ready-made round sheets, or wind them onto ready-made mittens. In the second case, secure each circle on 4 sides with a needle and thread.

Knitting pattern for paw mittens:

burgundy children's mittens with knitting needles

The “bump” pattern is quite voluminous, so when knitting mittens for a child, do not get too carried away with it. Bumps on the canvas can prevent the handles from bending.

For example, continue the elastic on the back side in the middle of the fabric, followed by crossing the loops into a braid. At the top, add a fan of knit stitches that end in cones.

Or knit a wide sleeve area openwork pattern with the addition of cones. Separate this area on the wrist with a 1x1 or 2x2 elastic band, reducing some of the loops. Then continue knitting mittens in a way convenient for you.

Knitted mittens for teenage girls and boys

fashionable knitted mittens for teenage girls

Mittens for teenagers are in many ways similar to knitting patterns for adults. The calculated number of loops differs slightly, as do the parameters of the palm.

For example, choose an interesting model for mittens for a teenager, taking into account the measurements of his/her hand, among the models that we will consider in a future article on knitting men's and women's gloves.

Children's set - hat, scarf, knitted mittens: photo models

knitted set of their hat, scarf and mittens for a child

knitted set for a child - hat, scarf, mittens, example 12

Video: how to knit children's mittens minions with knitting needles?

They keep hands warm much better due to the additional air layer. And such mittens will take longer to get wet than regular ones. And having learned how to knit classic mittens with a comfortable wedge for the thumb, you can add patterns and embroidery. According to our master class, you can knit both double and single mittens. We will show you the principle of knitting, and then your imagination will tell you. Let's get started!

To work you will need:

106g of Moscow Lana Sonata yarn (50% wool - 50% acrylic; 250m - 100g);
Circular knitting needles 80cm size 2.5mm (for elastic) x 2 pieces;
Double needles size 3.0mm (main);
2 markers;
Scissors and needle.

Video master class on knitting mittens:

Description of the process of knitting double mittens with knitting needles:

In order to understand how many loops you need to cast on first, knit the sample in a circle using stockinette stitch and make the necessary calculations. Then measure the volume of your hand; to do this, wrap a centimeter around the part of your palm that is located above the thumb (without the thumb itself). We knitted for a hand volume of 19cm (slightly loose).

And here are the green ones from the video lesson.

In winter frosts, it is especially important to keep the child’s hands warm. Therefore, you will probably find the master class useful, how to knit double mittens (with lining), prepared by Vera Ponomarenko. In addition, Vera’s turned out to be very beautiful and elegant, you can see them in the photo. The description of the work is designed for the age of a child: 3-4 years, but using this principle you can also knit mittens of large sizes.

Double mittens (knitting)

Do you want to knit mittens for your child, but don’t know how? The master class on knitting children's double mittens will help you find the answer to your question. Use your imagination and it’s no longer just everyday life Everyday life in frosty weather, but also an excellent gift for your favorite holidays. After all, we have been taught since childhood: “The best is made with your own hands!”

Yarn: Moscow LAMA “Russian motif” (100 g / 300 m, yarn composition: 40% wool, 60% acrylic)
Marker: piece of contrasting thread – 12 cm
Needles: two sets of double needles 2.5 mm and 3 mm.

Description

To keep the mittens on the wrists and not slide down, which is especially important for children, knitting must begin with an elastic band. In this example, one of the popular options is used - k2, p2. And so that the product does not lose its presentation during subsequent wear, the elastic should be knitted with knitting needles of a smaller size than the main part is supposed to be knitted.

On stocking needles with a diameter of 2.5 mm, cast on 40 sts. Evenly distribute 10 sts on each of the four knitting needles and knit 2x2 rib for the next 50 rows. As the product begins to add row after row, it may seem that at the 20th row it is time to stop and move on to knitting the palm and thumb. But since the presented sample of mittens is double (with lining), this number of centimeters of elastic will fold in half.

So, after 50 rows it was the turn of stockinette stitch. At the same time, it is necessary to replace the knitting needles with a 3 mm diameter. Continue knitting another 8 rows. The thumb will begin in the 9th.

The methods for knitting the thumb of a mitten are varied. This master class describes the simplest of them. To do this, knit 4 knit stitches on the first knitting needle, insert a thread of a different color (marker) and knit the remaining 6 knit stitches on the knitting needle.

Return to the main color yarn, finish the current row with knit stitches, plus another 28 circular rows (total - 37 rubles from the rib).

In the next row, i.e. 38th, starting from the first needle, start decreasing along the edges. At the same time, on the 1st and 3rd knitting needles, slip the penultimate loop onto the right knitting needle. Knit the last loop and pull it through the removed one (i.e. 2 stitches along with a tilt to the right). But on the 2nd and 4th knitting needles the inclination should be to the left, i.e. Knit the first loop and pull through the second. Thus, decrease until there are two loops left on the knitting needles (total: 8 stitches). Cut the thread at a distance of 5 cm and tighten the remaining loops. The remaining piece of yarn will be needed later to fasten the outer and inner mittens together.

Return to marker. Using a knitting needle, pull the thread out of the fabric. Cast on the dropped stitches on the knitting needles. Total: 6 sts at the bottom and 7 sts at the top. On the bottom row, pick up one more side loop on each side. They must be knit crossed in the first row to avoid the appearance of holes in the fabric. In total, knitting the thumb is carried out on 15 loops for the next 17 rows.

The outer one is ready. It's time for the "lining". To do this, cast on 40 stitches along the bottom edge of the elastic so that the outer loops remain behind the work.

Work the next 8 rows in stockinette stitch. In the 9th row, knit 6 loops with a thread of a different color parallel to the thumb on the outer mitten. Return to main yarn. Continue working with knit stitches for the next 26 rows. In total, the elastic band should make 35 rows. Make reductions. Pull the last 8 loops together with thread, leaving a 5-centimeter tip.

Knitting the thumb of an inner mitten is no different from the method described earlier. The only difference will be the number of rows, which are half a centimeter less (15 rows in total).
In the end it turned out double mitten.

Using the previously left ends of the yarn, fasten both parts from the inside and turn the fabric inside out. This must be done so that the child does not suffer in the future when putting on and taking off gloves, because the lining will remain in place under any circumstance.
Perform the right mitten following the example of the left one.

The only exception would be the choice of knitting needles for thumb knitting. So, on the outside of the fabric, insert a marker at the beginning of the IV needle. The inner thumb, accordingly, will be located parallel to the outer one. The choice of knitting needle in this case will depend on the beginning of the set of loops along the edge of the elastic band.

Make a twisted lace. To do this, you need to cut the thread to the required length. Fold the piece in half. Secure one end with a heavy object, and start twisting the thread with your fingers on the other side. The longer you twist the piece, the tighter the lace will be. Next, fold it in half again, straightening it along its length. Tie one end into a knot to prevent deformation. Using a hook, pull the lace behind the front stitches at a height of 10 rows from the front stitch.