DIY street Christmas balls. DIY Christmas balls. Master classes. Christmas ball made of fabric and foam

In this article we will talk about how to decorate ordinary New Year's balls in an unusual and beautiful way, turning them into something unique.

Nothing sets the New Year's mood better than decoupage Christmas balls! Of course, it is much easier to go to the nearest store and buy finished products. But we are convinced that you will get much more positive energy from handicrafts than from going to the store.

How to make decoupage of foam New Year's and old Christmas tree balls: a master class for beginners

Foam – extremely comfortable pliable material for beginners. It cannot be broken like glass. And decorative elements such as fabric or beads can simply be attached with pins.

For example, even a beginner can handle this decor. Sequins are attached close to each other using decorative pins or regular pins decorated with beads.

If you have more free time, you can try decorating a foam ball as follows. First you should stock up:

Foam blank
Ground
Special varnish for decoupage
Brush
By water
Needles, pin
Sponge
Sequins, sequins, beads, ribbon, thread

IMPORTANT: The presence of soil should not be ignored - it will give the workpieces the smoothness they need. This is especially necessary if an old toy that has already lived its life is being processed.

The procedure is as follows:

The ball is covered primer. A dense layer is needed. You should not ignore any areas of the craft.

The preparation must certainly dry out. If you can’t wait to continue working as quickly as possible, you can use a hairdryer.
Now it's your turn decoupage varnish. This will allow the glitter that will be applied later to stick to the ball better.
Once the varnish is dry, you can finally apply glitter. To do this, dip a sponge or sponge into them, and then use blotting movements to treat the ball. You can use one color of glitter, or you can combine different options.

Next is the ball pierced with a pin, to which you can attach a ribbon- for her the toy will be hung on the Christmas tree.
Now on pins and needles beads and sequins are attached. The beads are stuck into the foam. You can create different patterns in this way.

IMPORTANT: The bead should serve as the “cap” of the needle, like a decorative pin. The sequin is placed under the bead.

Decoupage of New Year's balls with your own hands with a photo: instructions, description, photo

Such a ball will be a stunning surprise for loved ones, becoming a cozy addition New Year's interior. To implement such an idea needed:

Transparent Christmas balls

Photos
Tinsel
Tweezers
Ribbons

The procedure is simple:

From the ball you need remove the fastening. If you are afraid of cutting yourself, you should stock up on thick gloves in advance.

Now you need to take the previously printed photo And, roll them up into a tube and place them inside ball. Straighten paper can be used with tweezers.

IMPORTANT: Images must be printed on medium-weight paper. Paper that is too thick or thin will not work - in the first case it is difficult to push the workpiece inside the ball, and in the second it may tear or not straighten.

Tinsel needs to be cut not small pieces
Pour it inside The ball can be filled using a funnel made of paper. Filling should be carried out carefully - it is undesirable for the decor to get into the area in front of the photograph.
Just as neat the fastener is inserted back. To make the ball more elegant, it is recommended attach a ribbon to it, which will hold the toy on the Christmas tree.

Decoupage of New Year's balls with bows: instructions, description, photo

For such decoupage you will need:

Styrofoam or plastic ball
Jute thread
Satin ribbon
Beads
Glue gun
Scissors

Decoupage order:

First of all, to the ball you need glue the jute loop. The photo shows a base made of ordinary tightly compressed paper, but any base that is a New Year's ball will work perfectly.

gluing a jute loop onto the base for a New Year's ball

Now around the ball need to be glued jute thread.

IMPORTANT: This should be done carefully, avoiding any gaps.

Next, a hot gun is used to fastening of beads.

Now it's time to make the bow. For him it is necessary cut three strips of tape.

One of the tapes is needed fold in half, gluing connection point.

The same must be repeated with the second piece of tape. These two pieces need to be attached to each other cross to cross.

They can fasten glue, or you can simply tie it with a piece of ribbon of a different shade.

Now all that's left is glue the bow to the jute loop of the ball. You can mask the gluing mark with another tape.

How to make bows for Christmas balls with your own hands?

To create simple bows you will need:

Satin ribbon. It is advisable to choose two types of tapes
Beads, rhinestones
Ruler, scissors

Operating procedure:

Required from each type of tape cut off one piece at a time. Their sizes should be different.

IMPORTANT: The ends of satin ribbons must be scorched with fire or treated with glue - this will prevent them from unraveling.

Now you need take the tape bigger size, folded it in half.

Holding the tape in the middle, you need to bend it as in the photo.

By analogy it is necessary fold the second part of the tape.

Then the workpiece must be turned over upside down.

Part of the workpiece is lowered, and to where she was, glue is applied.

Next is the ribbon glued together in the form of a bow.

Similarly, it is created second bow from a tape of smaller diameter.
Both bows stick together between themselves. You can also decorate beads.

Decoupage of New Year's balls with lace: instructions, description, photo

You can make a bow from lace according to the diagram for ribbons, which is attached above.

You can also decorate the ball completely with lace:

To do this, first of all you need, as described earlier, apply primer to the ball.

IMPORTANT: The lace should be chosen so that it is easy to cut into segments.

Next lace sticks on the ball. Regular PVA will come in handy.

Needed for lace apply acrylic paint or soil.

If you want to give the lace a different shade, you need to start dilute acrylic paint of this shade with water.

Then paint is applied to the ball. You can right away smear it with a napkin- this is how the effect of antiquity is created.

It remains to cover the ball on top after the paint has hardened. acrylic varnish.

Decoupage of New Year's balls with fabric: instructions, description, photo

For fabric decoupage you need:

Styrofoam ball
Fabric in two colors. One will be the background, and the second will be the pattern.
Tapes - both thick and thin
A knitting needle or toothpick, a stationery knife, scissors from a manicure set

Ball making process:

Ball to start is divided into sections. The larger the ball, the correspondingly more sections. You can do this “by eye”, or you can use a pen, thread, rubber bands - whatever is more convenient for you.
Along the lines cuts are made with a stationery knife. Since the foam is easy to cut, there will be no problems.

IMPORTANT: Deep cuts can only be made if the ball is large. In this case, the small one risks simply falling apart.

Textile With reverse side should iron.
Need to cut out shreds, previously by measuring the parameters of the sections marked on the ball. Definitely worth it leave about a centimeter for seam allowance. It is advisable to cut the fabric in the form of regular rectangles, since during the decoupage process it may “move to the side” a little, leaving gaps on the ball.
Next, using toothpicks or knitting needles, the fabric needs to be tucked into the slits of the ball. It's worth starting from the middle gradually moving towards the edges.

IMPORTANT: Of course, you can simply glue the fabric, but there is a high risk that it will become deformed during the gluing process. In this case, it will be impossible to correct the craft.

Excess threads are cut off and the joints are masked with tapes.

Decoupage of New Year's balls with a napkin: instructions, description, photo

This version of decoupage seems difficult to some, because it is not easy to paste over a spherical surface without wrinkles. But probably in the following way:

The first thing to do is process the balls themselves, sanding them and covering them with at least two layers of primer. Each subsequent layer is applied only after the previous one has dried.

Now they are taking decoupage napkins. Naturally, the plots must be selected interconnectedly. The pictures you like are worth Carefully tear off the edges. You can cut it out, but negligence looks even better.

IMPORTANT: There is no need to separate the napkins at this stage - this will need to be done immediately before applying them to the ball.

But after the pieces have been selected, you can Layer the napkin and glue it onto the ball. You need to apply glue on top.

Thus the remaining plots are pasted on. They are recommended glue overlapping - uh This method is the most successful.

Now the balls need to be left dry out.
Then they are desirable sand- this will remove the wrinkles.
Next are applied three layers of acrylic varnish on water based.
Follows again drying.
Now it's time alkyd varnish, which is sold in cans. Required two layers.
Another one drying.

IMPORTANT: Drying cannot be neglected.

The final stage remains - decor ball with beads, ribbons.

Decoupage of New Year's balls with wool: instructions, description, photo

For similar decoupage needed:

Styrofoam ball
Wool of various colors
Needles for felting
fishing line
High temperature silicone adhesive
Satin ribbons
Beads

Decoupage is done like this:

With a needle the wool falls onto the ball in small pieces. The material will lay perfectly on a flat foam plastic surface, so even a novice master can handle it.
Further more pieces are added. You need to felt until the wool surface becomes smooth.

IMPORTANT: Finish felting should be done with a thin needle.

Next you need felt the ornament.
Carefully beads are sewn on and ribbons are tied– it all depends on the idea.

Decoupage of New Year's papier-mâché balls: instructions, description, photos

For such a craft you need:

Plain A4 paper
Wooden chopstick (you can use chopsticks from Japanese restaurants)
Some kind of board with holes where you can place the sticks while drying them
Acrylic primer, water-based acrylic varnish and acrylic paints
Glizal – 50 ml
Liquid used to remove nail polish
Brush No. 10
Bowl
A cloth that absorbs well
Thread, needle, lighter
Ribbons

The ball is made like this:

First thing, the ball is being tidied up– the top is removed, glitter and other old decor are removed with sandpaper.

IMPORTANT: It is advisable to do this under running hot water.

Nail polish remover early paint is removed.
Need to use it again sandpaper.
Next is the coating acrylic primer.
Now the ball put on a stick and dry. You can also use a hair dryer, but in this case it must be kept at a distance of at least 30 cm from the ball. After this, you will have to wait until the ball cools down.

Pours into a bowl glue.
Sheets need to be torn into several parts crumple up them, and then straighten out a little.
Further paper need it quickly dip it in glue and press it to the ball.
With your fingers folds form on a craft.

IMPORTANT: You need to work quickly, as the paper gets wet and tears soon after glue gets on it.

After all the pieces have covered the ball, you need to leave it again dry. Only this time approximately for 12 o'clock.

Acrylic paint The already dried workpiece is covered.
And again drying. This time on 3-4 hours.

Now Glisal is mixed with paint. You need to coat the ball with this composition, and quickly!
Further with a cloth need light movements walk on the ball.

IMPORTANT: You just need to remove the excess, not remove the paint.

Preparation again dries in 3-4 hours.

Now it's time acrylic varnish. They even need to coat cracks. After hour break more applied two layers to dry between them.
Left decorate ball.

How to make a New Year's artichoke ball toy in decoupage style: step-by-step instructions

To bring such a beautiful and meditative technique to life needed:

Actually, foam balls
Scraps of fabric or ready-made ribbons
A large number of tailor's needles

The process is like this:

If in stock shreds, they need to be good iron. Ribbons are cut into pieces approximately 3-4 cm each.
The first ribbon need to be attached as follows.

Need the next piece fold into a triangle.
Next you need create several triangles, and then attach their vertices to each other. In the end it turns out square.

Then you need attach the ribbons according to this pattern:

IMPORTANT: The space can be decorated, for example, with a ribbon.

Decoupage of Christmas balls in vintage style: description, photo

Materials:

The diameter of the balls is not too small, otherwise the pictures will be inconvenient to glue
Acrylic white primer
Glue varnish, which is used in decoupage, as well as acrylic glossy varnish
Decoupage napkins with vintage images
Scraps of old newspapers, sheet music
Acrylic paint in some vintage tones. It’s worth considering purchasing paint in an antique gold tone.
Glitter
Wet wipes
All sorts of things for decoration like beads, sequins, lace, ribbons, texture paste. Since we are talking about vintage, ink, archival stamps for text, various dried flowers, sprays, etc. will also come in handy.

Now about the process itself:

First thing, the ball is being prepared– primed with a sponge. For convenience, it is recommended to first remove the caps from the balls and place the balls on a stick. By the way, the lids should also be treated with a primer.

The balls must be given dry.

Meanwhile the images on the napkins are cut off.
Once the primer is dry, you can use glue attach pictures. You need to coat the napkin with glue over the image.

IMPORTANT: You need to smooth the napkin from the middle to the edges.

Now we need to produce coating with decoupage varnish.

Next you can glue pieces of newspapers, sheet music. The principle is the same as with napkins - gluing it onto glue and spreading it on top.
Now you can stick, For example, waxed cord or apply texture paste through a stencil. They will also create a vintage effect. And how can you resist crackle pastes, creating a cracking effect?

Crackle paste is what you need for a vintage ball!

Then you can walk on top of all this splendor white acrylic, trying to powder and hide all the clear boundaries. The waxed cord must be completely hidden under paint.

Now it's time colored paints. Apply them with your fingers, then lightly smear them with a napkin. The result should be a worn effect.

IMPORTANT: It is preferable to work with several colors of similar tones. For example, red, brown. Applying antique gold paint to the ball
Then, since the imitation of antique gold has gone, you can apply a little gold leaf. It is applied to the glue using a brush.

Spray with pearlescent red tint It might come in handy here too. You just need to apply it a little.

Now it won’t hurt to powder the workpiece a little white acrylic. There shouldn’t be a lot of it – you just need to create a dusty effect.

If you wish, you can using ink and text stamp embellish the craft.

It won't hurt either glitter– it is applied with a brush.

Now you need glue the balloon cap back on, and decorate the craft itself with some decor like flowers, ribbons.

IMPORTANT: The balloon cap should also be decorated.

Finally, it is recommended to use acrylic varnish. Moreover, it is advisable to use a spray varnish in order not to smear previous works with a brush.

Decoupage of a snowman on a New Year's ball: ideas, photos

Lace New Year's ball Decoupage balloons with napkins and craquelure paint
A New Year's ball decorated with your own hands is a great gift idea! Anyone will undoubtedly be proud of such a unique and beautiful ball in their collection.

Video: Master class on how to decoupage a ball and a box for it:

The symbol of the coming 2020 will be the mouse, so decorations and New Year's balls in the shape of a mouse, which you can make with your own hands, will look very appropriate. An ordinary boring and unremarkable Christmas ball can be turned into a funny mouse.

For decoration you need to prepare:

1. White and gray felt with polka dots.
2. Lace.
3. Fluffy wire.
4. Blanks for pupils or half-beads.
5. Pompoms (pink for the nose and yellow for the middle of the daisy).
6. Marker and scissors.
7. Hot glue.

You need to make a year symbol like this:

1. From white felt, according to a pre-drawn pattern, cut out the paws, eyes of the mouse and petals for the daisy.

2. From gray polka dot felt, cut out ears according to the pattern.

3. First, you need to glue felt eyes to the ball, then glue blanks for the pupils onto them.

4. Glue on a pink pompom for the nose.

5. Glue the ears.

6. Glue together a daisy from a pompom and felt petals. Glue a green fluffy wire - a stem - to the bottom of the pompom.
7. Glue the chamomile to the ball, and glue the foot on top of the stem. Glue the second leg.

8. Make a bow out of lace and glue it to the top of the ball mouse’s head.
9. Glue a pink fluffy wire to the back - a tail.

The ball in the form of the symbol of the year is ready.

Christmas ball using decoupage technique

Decoupage is very interesting and simple technique, which will make it easy to create beautiful Christmas balls with your own hands for the 2020 meeting. For creative process You will need very simple components:

1. Foam base for the ball.
2. Paper napkins with New Year's motives.
3. PVA glue.
4. Paints and sponge.

For additional decor, you can use everything you have at hand: braid and lace, beads, rhinestones, spruce branches and berries.

You need to design the ball like this:

1. Coat the base with PVA glue.
2. Cut out the desired motif from a napkin.

3. Attach the design to the base, cover with plastic and smooth it out carefully. You can make several such fragments with a pattern for one ball on different sides or limit yourself to just one.

4. Using a sponge, apply paint to the free surface of the ball, extending slightly beyond the edges of the design.

5. The ball needs to be dried and then made additional decoration, if needed. This could be a bow at the base of the loop or rhinestones, beads on the surface of the ball, which can be glued with hot glue.

Advice!
To create a three-dimensional texture in free places, you can use putty or flour diluted with paint and water.

Ideas for quick Christmas balls from scrap materials

To create beautiful and stylish New Year's balls with your own hands for the celebration of 2020, you do not have to spend a lot of money on expensive decor and several hours on decorating crafts. Sometimes it only takes a few minutes and very simple materials at hand, which almost all housewives have at home, to make a unique and beautiful toy for the Christmas tree. Here are a few ideas that will help you prepare for the holiday and decorate your Christmas tree quickly and beautifully.

Important!
For the base of the ball, you can use any old plastic or foam ball or make the base yourself.

The base for the ball can be made of plain paper or newspaper, which needs to be crumpled into a tight ball and wrapped with any sewing or thin knitting thread. However, it is not necessary to make it perfectly even. Next you need to decorate the base. Decor of white roses made from paper towel, will look gentle and incredibly beautiful.

Base for the ball;
paper towels;
loop braid;
PVA glue and hot melt glue.

Do this:

1. Tear off one section of paper towel, drip glue around its perimeter and fold it diagonally into a strip.
2. Drop glue onto the tip of the strip and fold the rosette, making turns and turning the strip.

3. Make several of these roses. Their number depends on the diameter of the ball.
4. Glue a hanging loop to the base.

5. Cover the entire ball with roses.

The resulting decoration can be painted in any color and/or decorated with beads, rhinestones, feathers or ribbons.

The blank for the ball can be decorated with the following available materials, simply by gluing it over the entire surface:

1. eggshell. The ball needs to be coated with Titan glue and pieces of the shell should be applied to it. They can be pressed down with a thin stick to help them press down better and break into additional pieces, which will create a more interesting texture.

2. Buttons of different sizes.

After gluing all the elements, you need to leave the ball until it dries, then continue decorating. You can paint these balls any color, add glitter or rhinestones. You can decorate the loop with bows or a composition of fir branches and beads.

Another simple decor option is to decorate with simple knitting threads. To do this, you need to paint the base of the ball in the color of the thread, and then randomly wrap the ball with knitting thread, securing the ends with glue.

Large balls made from plastic bottles

You can make a decoration in the form of an unusual New Year's ball with your own hands for the New Year 2020 from ordinary plastic bottles. The size of the ball depends on which bottle will be used. The following is a description for a large ball of a five-liter plastic bottle.

To create this Christmas tree decoration need to prepare:

1. Five-liter plastic bottle.
2. Braid and ribbons.
3. Small figures for decoration: bird, snowflake, bell, fir branches.
4. Thread and needle, scissors.

Make a ball like this:

1. Cut 6 rings from a plastic bottle.

2. On each ring, mark 2 points dividing the ring exactly in half. This is the top and bottom of the jewelry, which will connect the rings to each other.

3. Punch holes at the designated points.
4. Prepare the decor that will decorate the ball. You can glue a composition from rays of plastic snowflakes, birds, twigs, and attach it to a thread. To decorate the bottom of the ball, you can use a bell, which is also attached to a thread.

5. Using a thread and a needle, connect the rings at the designated points below and above so that they form a ball.

6. The same thread should be used to sew the decor inside the ball at the same time.
7. Decorate the bottom of the ball with a bell and spruce branches, sewing them to a plastic base.

The ball is ready. Now you need to sew a thin ribbon loop to the top and decorate the ball at the base of the loop with ribbon bows.

Christmas tree balls made of foamiran

For crafts, you can use a material such as foamiran. It is very flexible, bright and suitable for realizing almost any creative idea. Foamiran with sparkles will make a very elegant New Year's ball for the New Year 2020, which you can make with your own hands according to the description given below.

First you need to prepare everything you need:

1. Foamiran with sparkles of different colors.
2. Thin braid for the loop.
3. Threads of rhinestones, beads, openwork ribbons or lace for decoration.
4. Hot glue gun.

You need to make a ball like this:

1. For each ball you should choose 2 shades of foamiran.
2. Cut the foamiran into circles with a diameter of 6 cm. You need to make 8 circles from each color.

3. Cut the circles in half. Coat the cut line and glue the halves in half again, with glitter inside.

4. Glue 2 pieces of the same color together, connecting the end part to form a semicircle.

5. Coat each semicircle with glue along a straight line and glue the semicircles, alternating colors.

6. Unfold the resulting accordion and glue it together.
7. Cut a strip of foamiran, bend it, and glue it in half lengthwise. Roll it into a roller, placing a loop of thin braid in the middle, and glue it to the top of the ball.

8. The exact same roller needs to be made from foamiran of a different color and glued to the bottom of the ball.

The decoration is ready, all that remains is to decorate it. Here you can use any material: braid, lace, beads, rhinestones. You just need to glue the decor on top of the ball. You can also decorate with foamiran semicircles glued between the parts of the ball.

Foil snow globe

You can make a brilliant and original New Year's ball for 2020 with your own hands from ordinary food foil. The whole job will take no more than half an hour, and the result will be stylish and very beautiful toy, which can be used to decorate a holiday tree or even give to friends as a New Year's present.

To work you need to prepare:

Roll of food foil;
base for the ball (foam plastic or just a ball crumpled up from newspaper, wrapped in thread);
thin braid for a loop and a 2.5 cm wide ribbon for decoration;
hot melt adhesive.

You need to make a ball like this:

1. Cut the foil into strips 10 cm wide, then into squares.
2. Roll each square into a tight ball.

3. Glue a loop of thin tape or braid to the base.

4. Cover the entire base with foil balls, starting from the loop and continuing over the entire surface of the ball.

Important!
You need to glue the foil lumps very close to each other so that there is no distance between them.
The ball is ready, all that remains is to do it beautiful bow for decoration. To do this, you need to cut a 10 cm ribbon, fold it into a bow and sew it in the middle, glue it to the ball at the base of the loop.

DIY sweet Christmas ball

Christmas balls DIY items made for the 2020 holiday can be not only beautiful, but also delicious. Making such a ball of candy is not at all difficult. To work you need to prepare:

1. Candies in candy wrappers. You can use any round-shaped chocolate candies, for example, “Ferero Rocher”, “Martian” or “Rafaelo”; for such candies you will not need to first tuck the tails from the candy wrapper. If you use “Golden Lily” or similar candies, you must first tuck the tails from the candy wrapper and glue them.
2. Styrofoam ball for the base.
3. Tulle, ribbons, thin braid for decoration.
4. Small nails and a metal rod for attaching decorative elements.
5. Hot melt adhesive.

You need to make a sweet ball like this:

1. First, cut a thin strip of 20 centimeters, bend it in half and glue it to a foam ball - this is a loop by which the ball can be hung.

2. Cover the entire foam ball with candies, starting from the loop.

3. For decoration, cut the tulle first into strips, then into squares.
4. Attach 2 squares folded 4 times onto small carnations and insert the carnation between the candies. To deepen it, you can push it inside with a thin metal rod.
5. Fill the space between the candies around the entire circumference of the ball with tulle squares.

6. Now all that remains is to make a beautiful bow from ribbons and braid and glue it to the base of the loop.

Advice!
Such a ball can be hung on a Christmas tree or given to loved ones, friends, and acquaintances as a New Year's gift.

Openwork balls using jute filigree technique

Using the jute filigree technique, amazingly beautiful designer decorations for the Christmas tree are obtained. You can make such New Year's balls with your own hands for the holiday dedicated to welcoming 2020, but you will have to try and spend quite a lot of time creating an openwork toy.

To work you need to prepare:
1. Any foam or plastic ball for the base.
2. Jute rope.
3. Sharp nail scissors, pliers.
4. PVA glue or polymer and hot glue gun.
5. Cling film.
6. Ribbons, lace and beads for decoration.
7. Acrylic varnish.

Interesting!
The pattern on the ball can be chaotic or symmetrical, at the request of the needlewoman.

For convenience, you can first draw a pattern with a marker on the ball, which is used as a base, and then wrap it in plastic cling film.

1. Cut small pieces ropes, try them on according to the details of the picture and soak them in glue, glue them according to the picture. All elements must be glued so that they come into contact with all other elements that are located around.

2. It’s better to start from the top of the ball and gradually cover the entire ball. Let the glue dry.

3. Using small scissors, carefully cut the woven pattern between the parts along the entire circumference, divide the woven ball into 2 halves, and remove the base.

4. Now you need to separate the remaining film from the pattern. This is best done with small manicure scissors or pliers or thin-nosed pliers.
5. Glue the halves of the ball together, carefully applying hot glue to the parts that should be in contact.

6. Attach a loop of thin ribbon or braid to one of the openwork elements and decorate the ball. For this you can use ribbons, braid and beads.

Making this ball is quite difficult, but fun.

New Year's DIY: decorate Christmas balls with your own hands.

Very soon the countdown to one of the most beloved, magical and cozy holidays will begin - the New Year. The weather outside is not encouraging, so it’s time to take matters into your own hands and create the New Year’s mood yourself, or even better, with the whole family. For example, arrange a home master class on decorating Christmas balls. You are a pleasant company and good mood. We provide inspiring examples and detailed instructions.

History of toys. How did the Christmas ball appear?

Christmas and New Year shrouded in many legends and legends. One of them is about the appearance of Christmas tree balls.

Ancient peoples believed that spirits lived in the branches of trees and influenced the harvest and soil fertility. To gain their favor, the sacred tree (apple tree) was decorated with vegetables, fruits and a celebration was held around it with songs and dances.

This tradition was adopted by Europeans. The evergreen spruce became the ritual tree - oranges, gingerbread, nuts and even eggs were hung on it, but the apple remained the most accessible and popular decoration.

In the second half of the 16th century there was a terrible harvest, there were few apples. And then German glassblowers from Thuringia came up with the idea of replacing the fruit with glass balls, which the townspeople fell in love with at first sight. This is how the first Christmas tree balls appeared, with which we still enjoy decorating our homes today.

1. Decor of a glass ball

Necessary materials: transparent ball made of plastic or glass, filling of your choice, loop and ribbon for bow

The easiest way to create a unique decoration for your Christmas tree is to buy transparent Christmas tree decoration balls made of plastic or glass (for example, on ozon.ru) and fill them with tinsel, moss, large beads, paper stars, feathers, small cones, spruce branches. We make a loop from ribbon, twine or thick thread and decorate the metal hat with an elegant bow.

2. Decor using acrylic paint and marker

Necessary materials: transparent glass bowl, acrylic paint and marker for glass and ceramics, plastic bottle/cup

painting New Year's toys by hand - real art. But not having an art background doesn't mean you can't pick up paints or markers. To avoid uneven strokes and other problems, paint the New Year's ball... from the inside. Yes, yes, that’s possible too. To do this, drop a little acrylic paint inside (it looks especially luxurious with glitter) and twist the toy until you achieve the desired result.

Then turn it over, fix it on a bottle or glass (so that excess paint flows out) and leave it for a day. On the outside you can draw something with a special marker or write wishes on next year. Voila! You are a brilliant artist who didn’t even need a brush.

3. Decor with sequins and beads

Necessary materials: foam ball, sequins or beads, pins, polymer glue, accessories (metal cap for the ball and ribbon)

Balls decorated with sequins or beads will make any tree sparkle and shine in the light of New Year's lights. Each sequin needs to be attached to a foam ball using a sewing pin. To avoid any gaps, pin overlapping.

Working with beads is not much more difficult. Here you can experiment and string several beads on each pin at once different sizes. Then we glue the fittings, make a loop and hang our beauty on the tree.

4. Lace decor

Necessary materials: foam ball, lace parts, PVA glue, acrylic paint of two colors, sponge, polymer glue, accessories

To make an elegant vintage Christmas tree ball, glue the lace parts to the base using PVA glue. Then cover it with acrylic paint, first one color and then another. It is advisable to choose a contrasting pair: for example, white and bronze. Finally, we go over the surface with a sponge to create an aged effect and attach the fittings. We think this ball is a great addition to a gift.

5. Ball made of thread, rope or twine

Necessary materials: balloon, thick thread, rope or twine, PVA glue, glue container, polymer glue, accessories

You can make stylish balls for your Christmas tree even using simple materials at hand. To do this, tie a balloon and cover it with PVA glue. At the same time, prepare a thick woolen thread or twine: pour glue into an unnecessary container and leave the rope there for about 15 minutes.

Then we randomly wrap it around the inflated ball and dry this unusual design for 8-10 hours. After we pierce it, we are left with a hollow ball of rope. You can glue accessories to it, decorate it with sequins, beads, rhinestones, or cover it with spray paint. A simple but elegant decorative item is ready.

6. Decor with acorns and pine cones

Necessary materials: foam ball, natural materials(cones, acorn caps), acrylic paint, wire cutters, polymer glue or glue gun, accessories

Cones, acorns and other gifts of the forest are associated with nature. Why not use them instead of endless plastic and other artificial materials for decorating Christmas balls? For example, you can cover the toy with brown acrylic paint and use a glue gun to decorate it with acorn hats. Another option is to cover the ball with individual scales or the tops of cones. This way you will not only have a good time, but also become a little closer to nature.

Greetings to everyone who stopped by to visit! Probably for me, winter is the most magical and mysterious time of the year! Everything that surrounds us, strewn with white fluffy snow, suddenly turns into an enchanted kingdom! The glass windows of our houses are painted with unique, varied, lacy winter patterns... Especially at such times, there is a desire to create something unusual, winter and beautiful to decorate the interior of your home.

For work I needed:

*Large transparent plastic ball, detachable (diameter 20 cm), consisting of two halves;

*Alabaster;

*You can use a ready-made house, but I made my own. For this I needed: a piece of cardboard, checkered paper, a pencil, a ruler, a house pattern, acrylic paints and a brush;

*Structural paste or paste that imitates snow, made by yourself (), artificial snow.

*An old brush with frayed bristles (for structural paste);

*Contour on glass white(for example, Tair companies);

*Nippers or side cutters;

*Silicone hot glue;

*Palette knife;

*Cotton pads, napkins, alcohol;

*Silver glitter powder;

*Transparent nylon bow, thin bow satin ribbon, plywood snowflakes, snowflake stickers.

*Toothpicks and twine (for the fence).

*Decorative stones for an aquarium.

*Small branches, Christmas trees, small figures: gnomes, deer, dogs, snowmen, everything you can find will be useful. You can use figures from Kinder Surprises;

After you have prepared everything you need, you can begin your magical creativity - creating a ball!

ATTENTION: We perform all the decor in that half of the transparent ball, which is smooth along the edge inside. Set the second half of the ball (lid) aside.

Using the simplest pattern, I made a gingerbread house out of cardboard. Using colored acrylic paints I painted it chocolate and white and covered the roof with snow.

The entire decor of your first transparent plastic ball I made it on a base that I made to the size of the ball using gypsum mortar. To do this, one of the halves of the ball was covered with an ordinary thin cellophane bag and filled with a ready-made alabaster (gypsum) solution.

The solution is made like this: pour gypsum powder into any unnecessary container (for example, a disposable plastic cup) and then, constantly stirring with a spoon or stick, gradually pour in water. There should be approximately two times less water than powder. I stirred all the time, as the plaster hardens very quickly. She very carefully poured the plaster onto the straightened little bag in the ball, gently shook it, gently tapping it, and left it to harden.

After the mass has hardened, the base for work is ready.

I placed the base on a cardboard reel of tape and tried on the future decor: a house, Christmas trees, a fence (which I made from toothpicks), a snowman. I apply brown acrylic paint to the base and place the house and pebble path on it with hot glue.

Then I glued on hot glue: Christmas trees, plants, deer, fences - everything I prepared. I placed a tree behind the house, which I made by connecting several twigs.