How often do you get a pedicure?

Experts advise doing a pedicure once every 8-10 days. With regular foot care, the skin on your feet will become like a baby's, and your nails will look neat.

Before a pedicure, you need to wash your feet well and remove old polish. Take a pedicure kit and disinfect all tools.

Now we proceed to the main stage of the procedure.

Steaming your feet

First, the skin of your feet needs to be softened. Prepare a pedicure bath with warm water, add soap foam to it (this can be shower gel or shampoo). To enhance the effect, it is useful to add a little to the bath sea ​​salt. Soak your feet in water for 15 minutes to soften dead, dry skin cells. Now we dry our feet with a towel and move on to the next stage.

Treating nails and cuticles

To do a proper pedicure, take nail scissors or clippers and cut the protruding part of the nail in a straight line. The shape of your toenails should be square to prevent the nail from growing into the skin. Using a nail file, trim the cut and rough ends of the nail from the edges to the center.

Using a manicure spatula or an orange stick, gently push back the cuticles.

To make pedicure easier, you can apply a special preparation to the cuticle, which softens and removes excess skin, and then remove the remains after 5 minutes. Using a spatula, try to clear the nail plate of any stuck cuticle particles. Run the stick under your nail to remove any dirt and dry skin cells that may have accumulated there.

Now you can use a nail file to remove rough, dry skin from your fingertips, as well as remove cracked skin on calluses.

To make the nail plate look smooth and shiny, it needs to be polished using a double-sided pedicure file. Use the dark blue side of the nail file to gently sweep over your nails on all sides, especially in the cuticle area. On perfectly smooth nails, the polish will last much longer.

Foot skin care

To your home pedicure was ideal, it is necessary to pay due attention to the feet. Our goal is to remove excess rough skin. Your first assistant in this matter is pumice. If the skin is not soft enough, soak your feet in a warm bath for another 10 minutes, then treat your feet and heels with pumice. Peels and foot scrubs are also great for getting rid of rough skin particles.

After such a procedure, cleansed skin needs hydration and nutrition, so lubricate your heels with a nourishing cream and give a light massage.

A little advice: if you suffer from excessive sweating of your feet, lubricate your feet with a special deodorant cream.

Cracked heels and calluses

If the skin on your heels is too shabby, you have dense corns or cracks on your heels, the situation cannot be corrected using a regular pedicure procedure. There are proven traditional methods, which will help make the skin on your heels soft and silky in a couple of weeks.

To remove hardness and cracks, apply a nourishing mask to your heels, wrap them in cellophane and put on socks. It is recommended to keep the treatment mask on all night, and the next morning, rinse and lubricate your feet with moisturizer. After a few procedures, the result will surprise you.

SPA pedicure at home

If you have enough time, you can pamper your feet with a SPA pedicure at home. The treatment includes a pleasant, relaxing foot bath with essential oils and a moisturizing, nourishing mask.

Prepare a bowl of warm water, add your favorite aromatic oil, dip your feet in the water and enjoy for 10-30 minutes. When the skin on your feet softens, massage your feet using a scrub. This way you will cleanse your feet of rough skin, they will become soft and smooth.

The next stage of a home SPA pedicure is moisturizing nourishing mask for legs. To do this, you can take your favorite nutritious cream and apply a thick layer to your feet. Then wrap your feet in cellophane and put on socks. This mask should be kept on for at least 2 hours, or better yet, all night. After a few procedures, your heels will become as soft as a baby's.

As a mask, you can use special SPA pedicure kits, which contain various caring preparations.

Have an excellent caring effect natural masks for feet that can be prepared at home. With regular use, they will give your feet a perfect look.

The final stage of the pedicure is applying varnish.

The last stage of a pedicure at home is applying varnish. It all depends on your taste. You can simply apply colorless polish to shine and strengthen your nails.

But in any case, first of all you need to degrease the nail plate from residual cream and cosmetics. If this is not done, the varnish will not adhere well and will not stick.

Now let's prepare to apply the varnish - place cotton swabs or special separators between your fingers so that the varnish is applied carefully and does not smudge.

It is recommended to apply a colorless base as the first layer. Thanks to this, the nail will be protected from toxins contained in colored varnish, in addition, the surface of the nail will become smooth and the varnish will adhere much more firmly. Your beautiful pedicure will keep a fresh look for a long time.

Wait until the colorless base has completely dried, then you can begin applying the colored coat of varnish. It is advisable to apply colored varnish at least two layers to obtain a rich and lasting color.

At the end of a professional pedicure, it is advisable to apply a layer of fixative varnish. It will help keep the polish on your nails for a long time. Be beautiful and feel free to wear bright sandals!

All girls and women should take care of the condition of their toenails. Beautiful fingers always look attractive.

That is why every representative of the fair half should learn how to perform a classic pedicure on her own. Moreover, it is not always possible to go to a beauty salon, where they provide a variety of services.

Procedure classic pedicure consists of trimming the excess cuticle that appears at the base of the nail plate. In beauty salons, this service is called a trim pedicure. The master cuts off the rough skin around the nails, and then treats the feet and heels, using exclusively pumice.

During a classic pedicure, the use of a razor or blade is prohibited. The nail plate is processed using tweezers and scissors.

Professional craftsmen often use as auxiliary tools bamboo sticks, skin-soaking foot baths, cleansing scrub and nourishing creams for foot skin care.

Modern beauty salons offer another type of pedicure, in which specialists remove the cuticle without using scissors and tongs, so it is almost impossible to accidentally get hurt. These tools are replaced by cosmetic preparations. All this can be easily done yourself at home.

Pros and cons of performing the procedure at home

Classic pedicure has many advantages. Among them, it is worth noting the purely manual procedure, which is completed quite quickly. During a trim pedicure, emollients are used that have a beneficial effect on the skin of the feet. The results of a pedicure last for a long period of time.

Carrying out a trim pedicure involves using techniques and tools that are familiar to everyone. This type especially suitable for those who disdain newfangled technologies.

When performing a classic pedicure at home, a woman, first of all, saves money and, more importantly, her own time.

The disadvantages of a trim pedicure include the fact that if the procedure is not performed by a professional, it can lead to inflammation or infection of the skin. All tools for processing cuticles are cutting, which means you can cut yourself or get injured.

We can definitely say that women with problem nails are recommended to trust their feet exclusively to a specialist who can select the necessary type of treatment.

What tools are needed?

The choice of tools for pedicure depends on your preferences in the classic or hardware type of procedure. The easiest way to process nails is the classic cut. To do this you need to purchase the following tools:

The pedicure machine looks like a regular razor, equipped with a comfortable handle, and replacement attachments are often sold in the kit. This tool is usually used when pumice cannot be removed from very rough skin.

In addition, a special razor is used in case of the formation of corns and dry calluses. If a woman regularly keeps her feet in order and looks after them, then she can completely do without a pedicure machine.

In order to do trim pedicure You must first steam your feet well. For this you will need a regular basin. If you wish, you can purchase a special bath in the store that will help you relax and enjoy the procedure.

Pedicure baths have a lot of advantages. It’s worth starting with the fact that modern devices a hydromassage function has been added to relieve fatigue and tension.

They also have ultraviolet lamps, which have a detrimental effect on all kinds of fungal pathogens. Magnetic radiation has a beneficial effect on joints, relieving pain.

In addition to all the above tools, you can also purchase nail scissors, files with different levels of hardness, pumice stone for treating heels and feet, a wooden stick or a special cuticle blade, as well as a laser grater.

It is worth noting that you should not save on tools for both manicure and pedicure. Before making a purchase, you should carefully study the assortment in the store and choose the most preferable tool. Nowadays, online shopping is common, which will make it easier for a beginner to choose.

If you treat your feet and toes at home yourself, then each woman will select the most suitable set of tools for her and will use only them.

How to do a pedicure correctly: instructions with step-by-step photos

If a woman cannot entrust her feet to a professional, then a pedicure can be done at home. This procedure is carried out in several stages:

1. To make it easier to work with seals on the heels, they need to be treated with a special cream that exfoliates dead skin particles;
2. Before steaming your feet, the nails must be carefully filed and given the desired shape;
3. If you have a special bath, you can add essential oils to the water;
4. After steaming, it is necessary to treat the heels and feet with pumice, removing dead skin;
5. Then you should work with each toe, namely, remove the cuticle with tweezers with beveled edges;
6. At the end of the pedicure, the feet should be thoroughly washed and then a nourishing cream should be applied, which will make the skin even softer.

How to do a hardware pedicure at home

Performing a hardware pedicure involves the use of professional instructions. All stages of this procedure require regularity and accuracy, otherwise you can cut yourself or cause various damage.

Lesson step by step:

A hardware pedicure will make your feet soft, free from scratches and rough skin.

Nail designs

To keep your feet healthy and attractive, you need to take good care of them, including a pedicure. One of the popular types of foot treatment is hardware pedicure. It can be done both in the salon and at home. Today we will look at what treatment is, how to do a hardware pedicure and what is required for it. We have also prepared step-by-step instructions for you for beginners.

What is also a hardware pedicure?

Medical hardware pedicure is a treatment of feet and nails using a special device. During the process, rough skin, corns, and calluses are removed not with a grater or blade, as in classical processing, but rather sanded off.

A hardware pedicure machine has cutters with an abrasive surface that rotate at a speed of 30-50 thousand rotations per minute. They gently remove dead skin particles and do not damage healthy skin.

Advantages of hardware pedicure

The main advantages of foot treatment include:

• safety - there is no risk of cutting the skin or leaving other damage, as with the classic procedure;
• delicacy - suitable for those with fine hair sensitive skin and even children;
• hygiene - the possibility of infection with a fungus is excluded, since no microdamages remain on the skin;
• long lasting result – after grinding with a machine, the skin remains soft and tender longer,
• A hardware pedicure should be done on average once every 4-5 weeks, while a classic pedicure should be done every 2-3 weeks.

Types of hardware processing

Classic hardware pedicure. With this treatment, a device for hardware pedicure is used on the heels, under the toes, and on other rough areas. They use it, only with a different attachment, to remove the overgrown cuticle and file down the overgrown edge of the nail.

How to learn how to do a hardware pedicure at home

To do a hardware pedicure at home, you first need to understand the attachments and cutters for the machine. Training in hardware pedicure begins with studying the classification of attachments.

Diamond bits

Above we have listed the forms of nozzles and indicated what they are used for. It remains to deal with the rigidity of the cutters. When choosing hardness, you need to follow the basic rule: hard cutters are used to shorten nails and remove calluses and corns, soft cutters are used to treat cuticles and small rough areas.

Diamond cutters have colored serrations that indicate hardness. So, the hardest ones have black notches, the medium ones have blue ones, the softest ones have red, green, yellow ones.

Ceramic tips

Ceramic tips are suitable for training hardware manicure and pedicure. They are used by beginners as they are softer and safer. Made from corundum, a material with a grainy surface. Their hardness is distinguished as follows:

• blue and pink have a hardness of 100 microns, that is, they are the softest;
• white ones have a hardness of 200 microns, they are medium;
• black and brown have a hardness of 400 microns, they are the hardest.

Sand caps

Sand or silicon carbide caps are an effective tool for treating rough skin. They are placed over the cutter and used once, after which they are disposed of. To treat your feet efficiently, you need a three-stage treatment:

• an 80 grit cap is used to remove the underlying rough skin;
• a cap of 150 units is needed for sanding, that is, removing unevenness from the treated skin;
• A cap of 320 units is used when polishing the foot, making it smooth and soft.

Processing technology

When treating feet with a machine, it is important to select the intensity of pressure. If you press the cutter too hard, the skin can be damaged. The direction of movement is also important. Experienced craftsmen advise:

• when training, choose a cutter rotation speed lower than recommended;
• position the nozzle at an angle of 35 degrees relative to the surface being processed;
• process the cuticle from the center to the edges, nail folds - according to the growth of the nail;
• move the cutter in the direction opposite to its rotation so that the nozzle does not slip;
• Do not press the attachment too tightly and do not hold it in one place, otherwise you may damage the skin;
• Be sure to apply the cream after treating your feet.

A detailed video tutorial with instructions for a novice master can be viewed here:

Step-by-step instruction

• Prepare your feet. Wipe off any old polish if it remains on your nails. Remove gel polish using cotton pads, soaked in acetone, foil and a grinding cutter or file.
• Wash your feet or take a bath. In order for the roughened areas to soften and be easier to process, your feet should be kept in warm water for 10-15 minutes. You can add salt, oil or other additives to the bath.
• Apply preparations that soften rough skin to corns and calluses. Leave for the recommended time indicated in the instructions. This will soften the stratum corneum and make it easier to remove.
• Wipe off any remaining product with a napkin. You can use a small towel; its fleecy structure will also capture the softened layers of skin. Rub your feet vigorously and roll up the skin particles with a towel. The towel must be washed after each use. It is unhygienic to reuse it during your next pedicure without washing it.
• Treat your feet with a large milling cutter with a high level of abrasiveness - it will remove rough skin and deal with calluses and corns.
• Use a medium abrasive cutter and then a fine abrasive cutter to polish and polish the feet, making them smooth.
• Use a small fine milling cutter to process the side rollers of the fingers and the areas between the fingers. For these areas it is important to use a fine-grained nozzle; too hard one can damage the delicate skin.
• Remove the cuticle using a diamond bit with a ball at the end or a needle-shaped cutter. If you are treating your feet with a machine for the first time and are afraid of damaging the cuticle, do an unedged pedicure. Soften the cuticle special means and move it away. Remove with the machine when you get used to using it.
• File off the overgrown edge of the nail or trim it and shape it with a cutter with medium abrasiveness.
• Polish the nail. To do this, you will need a special felt nozzle or a rubber cutter. If there are no such attachments, use a regular buff, that is, a soft file.
• Wipe your feet with a disinfectant to prevent infection. Apply moisturizer.

Note! If you have ingrown nails or overgrown nail plates or warts, it is better to go to the salon. It is difficult for beginners to get rid of these problems at home, especially when using the device for the first time.

For a detailed video on how to do a hardware pedicure at home, watch here:

On the site you can find photos of hardware pedicure and stylish nail design options. Look, get inspired and take care of your feet to look irresistible!

It's not for nothing that men compare a woman to a goddess. This is not surprising, because beauty deserves the highest praise. Only at first glance does it seem that taking care of your own skin, hair and nails is an easy task. In fact, ladies constantly have to stay afloat in the world of fashion and the beauty industry, regularly learning new useful and important information. To make searching for information a little easier, we will tell you what tools are needed for a pedicure and what you should pay attention to when choosing them. The information presented in this article will help you make your feet well-groomed and healthy.

The rules for choosing tools for pedicure are no different from the requirements for manicure tools. Professionals easily distinguish a good tool from a bad one, but beginners are faced with a lot of questions. To make your thinking easier, follow the rules when choosing pedicure tools.

• Buy carefully crafted tools that fit comfortably in your hand.
• Pedicure (and manicure) tools must be sharpened
• A good tool cuts rather than tears the cuticle
• The blade should not interfere with the processing of the surface, but provide a good overview
• High-quality blades have good maneuverability - they move unhindered and are able to remove even the most difficult to reach burr
• Pay attention to the steel from which the tools are made. Poor steel is soft, quickly becomes dull and prone to rust and stains. It is preferable to choose tools made from solid stainless steel.

Proper storage of pedicure instruments is the key to increasing their service life and painless procedure. Following these recommendations will help you preserve your toenail care products:

• Compulsory preventive condition To avoid corrosion of the metal or detachment of other particles from which the tool is made, it is necessary to store them in a clean and dry form.
• Pedicure instruments must be thoroughly sterilized after completing each procedure. Surfaces can be treated with medical alcohol or acetone.
• Do not drop tools or place them blade down. From such improper storage, tweezers, scissors or nippers can become deformed, which will lead to unusability.
• After each procedure, check the sharpness of scissors, wire cutters or other similar objects. If necessary, if the blade becomes dull, have it sharpened by a specialist. It is not recommended to sharpen the tool yourself, because unknowingly you can change the angle of inclination (which is not always possible for a non-professional to see), which will lead to the tool being unusable or, even worse, to cuts.
• Store all pedicure tools in a special case or case, where each individual accessory will be stored in an insulated compartment to prevent contact with the cutting edge of another item.
• Store tools containing springs in an uncompressed state.

The word “pedicure” itself has Latin roots and means “to care for the foot.” The pedicure procedure includes:

• Getting rid of rough skin
• Treatment of various deformations (ingrown nails, etc.)
• Elimination of calluses
• Fighting fungal diseases
• Cuticle care
• Foot massage
• Correction of the shape of nail plates.

Due to the abundance of procedures and the complexity of performing actions on the feet, tools for pedicure, as well as for manicure, must be of high quality (we have already discussed this above). To work with toenails, stock up on the following tools:

• Files. The purpose of the files is to polish, grind and shape the nails. Due to the performance of such different functions, files are characterized by different grain sizes. For example, coarse files with a rough, rough surface are great for working on artificial nails. When working with natural nails It is better to abandon iron devices and give preference to nail files on a cardboard or rubberized base.

Files come in the following types: diamond, ceramic, ruby, sapphire. All of these types of tools are best used when working with hard nails. If your nails are delicate and thin, you should use a file made of sandpaper.

Ceramic double-sided files are good to use. One side is focused on the initial cutting of the nail and working on the desired shape, and the second (smaller) side is on polishing the edges.

You can make your nails shorter with large files, and shape them with small ones. The main thing in a pedicure is to file dry nails, and direct the movements of the file in one direction - from the edge of the nail to its center. This will reduce the risk of nail splitting.

• Scissors with straight ends. Their purpose is to shorten thin nails, both in length and width. In order not to disturb the symmetry of the nail when shortening it, you should focus on the middle line of the nail, mentally drawn from the middle of the hole to the center of the free edge.

In some cases, scissors can be replaced with pedicure tongs. They have greater compressive strength and are more durable.

• Polishing files. With their help, nails are given shine. Most often, these files are numbered according to the polishing stages. A file with a rough coating is used only when the nail is in transverse grooves, as well as to remove pigment changes after using poor-quality varnish.
• Manicure sticks. Used after the use of drugs that soften the cuticles. It is best to give preference to wooden sticks or tools whose edges are made of soft rubber.
• Cuticle nippers. Allows you to painlessly and quickly remove the cuticle.
• Deburring pliers. Allows you to easily “bite off” unwanted burrs.

What other supplies are needed?

You cannot carry out a high-quality procedure with the help of tools alone. You will need the following items:

• Pedicure machine. A special machine has special blades that allow you to remove hardened areas of skin. An alternative is regular pumice, which is found in every woman’s bathroom.
• Synthetic toe pads. To make applying nail polish comfortable, use these special pads to prevent your fingers from touching each other.
• Disposable slippers. Just like in a salon, when doing a pedicure at home, these slippers are essential. You can easily attach them to your leg and easily move around the house while the varnish is still wet. As a result, the varnish does not smear, and nothing hinders your movements.
• Pedicure bath. It’s best to spend a little money and buy a special bath. Rest assured, the pleasure you will get is worth the money! The number of functions varies depending on the manufacturer and price category. Standard functions are: water, mechanical and mechanical massage with bubbles. While you don’t have this pleasure, you can replace it with a standard salt or herbal foot bath.
• Essential oils. You can add them to a foot bath for greater relaxation and softening of the skin. Only 3-4 drops of oil are enough.
• Foot scrub. It will help massage the legs, as well as remove rough skin cells, even out the skin, and make it smooth.
• Cotton pads.
• Nail polish remover.
• Remover of calluses and corns. It will help in the fight where pumice or scrub are powerless.
• Foot cream (to moisturize and soften the skin of the feet).
• Talc for feet. It has a deodorizing effect and is necessary to relieve feet from excessive sweating.

Now you know what tools you need to stock up on to carry out a pedicure procedure at home, which will be no worse than a salon one. Don't forget that the basis of a successful procedure is the pleasure you get from caring for yourself.

What could be more beautiful on your arms and legs? But many ladies think otherwise, citing inappropriateness salon procedure, because it takes a lot of time and is not cheap. But are the soles of the feet also useless? How to do a pedicure in a salon? And how long does it take in reality?

Why get a pedicure and manicure?

The beauty of your fingernails, toenails, and heels is, first of all, the aesthetics of your appearance, and not a tribute to fashion. Particularly well-groomed feet and hands are relevant in the summer, when gloves, socks and boots are left far behind, and they are replaced by open sandals and slippers. In addition, a timely manicure and pedicure is an excellent prevention of various fungal diseases, as well as a real salvation for people with problematic nail plates(for example, with ingrown toenails).

Another undeniable advantage of the procedure is the SPA procedures that accompany the work of the master. This means that your hands and feet are repeatedly rubbed with special oils, scrubbed, and masks are applied. And most importantly, all these actions are accompanied by light massage movements, improving blood flow and bringing your skin to ideal condition. And this is just a small fraction of what is in the cabin. We will tell you more about the procedure and its features below.

How do manicures and pedicures in a salon differ from those at home?

If you seriously decide to take care of appearance your hands and feet, the ideal option would be to visit a specialized beauty salon. Of course, performing such procedures at home has a number of advantages, for example, you can get a manicure in a pleasant home environment, and it will not be expensive at all. It’s just the kind of care that professional manicurists can provide you that will be difficult to repeat.

Another homemade option is pedicure socks. They allow you to gently remove keratinized areas of the skin, soften corns and calluses, and also make your heels pleasant to the touch.

What to expect from a manicure and pedicure in a salon?

So, let's say you decide to go to a manicure and pedicure salon. What's next? And what should you expect from such a procedure? The first thing that awaits you is a warm and relaxing bath for your nails, hands and feet. For example, if at one point you decide to perform both a manicure and a pedicure, it is recommended to start from the feet.

In this case, you will be seated in a comfortable chair, and your feet will be placed in a special hydromassage bath with bubbles and warm water. Then they will add bath salts with some essential oil, for example, jojoba. Moreover, this steaming procedure will take you only 9-10 minutes.

The second thing the technician will do is dry one of your feet with a towel and begin sanding the heels and soles. Moreover, if you have corns and calluses, a professional hand will cut them off using a special machine and remove them with nail files. After this, your feet will be moistened again with water and covered with a light scrub. In this way, the manicure and pedicure salon will help you get rid of the unevenness and roughness left after trimming.

At the end of this procedure, rinse with water, wipe dry with a towel and apply a mask for 10-15 minutes. Moreover, the application of this product can be accompanied by a light foot massage.

The third thing that awaits you is trimming the cuticles, filing and polishing the nails. And after all this - coating them with varnish. Practically, the same principle applies to manicure. The sequence and procedures themselves in the salon may differ due to the policy of the hairdresser or the type of manicure and pedicure. For example, in some hairdressing salons, instead of masks or lubricating feet thick cream prefer to use socks for pedicures. After them, the skin becomes softer, and the heels acquire a natural pink color.

Types of manicure and pedicure in beauty salons

When visiting a salon, you need to know what types of procedures there are. For example, manicure and pedicure can be:

• classic;
• hardware;
• European;
• female;
• male.

Classic manicure and pedicure are considered the most common procedures. For example, the first one is performed in the following sequence:

• removing old varnish;
• filing and shaping nails using special hard files;
• soaking your hands in warm water, for example with the addition of sea salt, for 5 minutes;
• wiping fingers and trimming cuticles and other excess skin using special tweezers and scissors;
• hand massage with cream and oil;
• nail polishing (in some salons it is included in the standard procedure, and in others it is paid separately);
• coating of nails with varnish.

Pedicures are performed in the same way. classic form. Please note that before getting a pedicure in the salon, check the list of services that are included in the standard procedure and which are performed for an additional fee.

Hardware and European manicure and pedicure

And pedicure is directly related to European and is one of its varieties. Before performing it, a special cream is applied to the cuticle or cut off using a machine equipped with a small diamond attachment in the shape of a ball or oval. In this case, hands and feet do not require pre-soaking. The main role in such procedures is played by special attachments.

European manicure and pedicure are performed with mandatory softening of the cuticle (using oil or special cream). Then the completely softened skin around the nails is removed using a wooden or orange stick. Afterwards, the nails are polished and take the desired shape. At the end of the process, your hands or feet are massaged and your nails are varnished. Here's how to do a pedicure in a salon according to the European style or using a special machine to trim and file away all excess.

Manicure and pedicure SPA

The SPA procedure includes the following steps:

• nail treatment (shaping and filing);
• primary softening and removal of the cuticle (European or hardware method);
• scrubbing the skin of the hands or feet using scrubs and creams;
• the use of chemical or deep peeling (the applied product allows you to get rid of small cracks and visible skin defects);
• massage with deep hydration;
• polishing and polishing nails.

As you can see, this is a pleasant and useful procedure. But how long does it take to get a pedicure in a salon? How long does it take to get a manicure?

Manicure and pedicure: duration of procedures

When visiting a salon, know that on average your manicure will take 30-45 minutes. Performing a pedicure will take the master about one and a half to two hours. In this case, it all depends on the condition of your hands, feet and nails, as well as on the number of procedures included in the manicure and pedicure.