How to remove shellac at home without special tools. how to remove shellac at home how to use foil to remove shellac

Hi all!

Just a warning: if you are not a fan of unaesthetic photos (raw cuticles, filed nails, etc.) - just do not read this post :)

There are two reasons for the action that you are about to see: 1) I am sick and cannot go to the salon, and not very well-made shellac is already completely indecently falling off in pieces 2) uncontrollable curiosity. Taking advantage of the fact that I'm sitting at home, and no one will see my potential fail, I decided to try to do something terrible - remove shellac at home without a special tool! :)

What happened - look.

I had such a shellac, I show a more decent hand, where I have not picked anything yet :)

Step one- we cut the top well with a rough file. In general, non-lazy manicurists also do this (although it’s not clear what to be lazy about, after that shellac slides off without any problems at all). We are not hacking here, we are trying to cut down the entire top layer to the maximum. The better we cut it, the easier the liquid will penetrate into the shellac structure.

step two- according to the standard scheme, "tear" pieces paper towel, prepare the foil, pour ZhDSL into the lid. I have the most common Sally Hansen(without acetone, which is so necessary in this case!)

Step Three- we dip the napkins in ZhDSL, gently apply it to the nail, wrap it with foil. If you are afraid that the napkin will slip: prepare larger pieces so that they can be wrapped around your finger. Thus, the napkin will stick and will not slip.

We are waiting for 10-15 minutes :) I waited about 12. It probably cost more.

Step Four- remove the foil ... It looked promising :) The bottom edge “bulged out” correctly, the rest was easily removed with a wooden stick. In general, everything was not very difficult to remove, but as if there were pieces of the base and the surface of the nail was very uneven.

And here's what happened. (For the faint of heart, this is the final warning!)

Not really, right? Due to this step five- take a file and process the surface of the nail. You need to find a suitable saw, thumb I processed it with a too coarse file and now I don’t have it in a very presentable form. In general, you need to find a middle ground. Well, then polish the whole thing with a buff.

As a result, the nails look like this:

Already better! And after treatment with Aevit, like this:

What are the results?
- Is the effect similar to the salon?
I'd give it a four plus. Still, in the cabin, less shellac cutting is required at the very end.
Is it worth doing this all the time?
I wouldn't. But as an emergency measure (you are somewhere where you cannot remove shellac), the method can be fully borne in mind.
And it’s also a nice way to save money, because in my experience, shellac itself can be done on a budget, but even in the most democratic salons, removal is usually not cheap.
- Does it harm nails?
Since this is my first such experiment, my nails are now a little "scratched". But I think it will be easy to recover.

Thank you all for your attention, I hope it was useful.

A beautiful manicure is the pride of every girl. Recently, manicure with shellac or gel polish has been very popular. Due to its strength and durability (this design can be easily worn for 2-3 weeks), as well as the variety of colors, this tool is so loved by many young ladies.

Despite the durability of this coating, sooner or later the time comes when you need to remove it. The nail plate gradually grows, and the manicure turns from a stunning look into an unattractive picture.

You can remove gel polish in a beauty salon where such a coating was applied, or at home.

Advantages and disadvantages

The process of removing gel polish at home has several disadvantages:

To remove such a coating at home, you will have to practice. From the first time it may not be possible to completely remove the gel polish, and the procedure will have to be repeated.
The operation must be carried out very carefully., otherwise you can damage the top layer or the nail plate itself.
You need to follow the instructions exactly so that the coating can be removed without damaging the nail.
You will have to purchase a tool and accessories for removing gel polish.

Despite these disadvantages, removing shellac at home has some advantages:

Saving Money - you do not have to pay a master in a beauty salon for this operation.
You can perform the procedure at any convenient time.
After removing such a coating, a number of strengthening manipulations for the nail plate can be carried out, because you do not need to immediately apply new design on nails.

Preparation

If you decide to carry out shellac removal at home, then you need to prepare for this process. First, purchase a gel polish remover. These can be various options:

conventional acetone or an acetone-containing product;
special preparations, for example, remover- it contains vitamins and nutrients that gently remove shellac without harming the structure of the nail;
isopropyl alcohol or a preparation containing alcohol- Isopropyl alcohol can be purchased at a hardware store. Since this substance is very concentrated, it can lead to severe irritation of the epidermis. Therefore, it must be applied very carefully, avoiding areas of the skin. You can keep such a tool on the nails for no more than 15 minutes.

Prepare tools:

nail file with high abrasiveness;
polishing nail file;
cotton pads (5 pieces) or cotton wool (10 pieces);
orange stick;
foil - 10 pieces;
fat cream or oil to soften the cuticle.

With foil

One of the most effective and popular ways to remove shellac is to use foil. It is not only used at home, many nail artists use this method in beauty salons.

You can purchase a special foil in a roll designed for removing manicure or use ordinary food from the kitchen. If you use the usual version, then the foil must first be cut into 10 small pieces. The size should be:

in width they should slightly exceed the size of the nail;
by lenght - easily wrap around your finger.

Cotton pads also cut in half or tear off small pieces fleece.

Step-by-step instruction:

It is necessary to cut off the top shiny layer using a nail file with high abrasiveness. This layer is the most resistant and durable, it is difficult to dissolve. And if it is not cut down, then the shellac will be very difficult to remove.
Remove dust and treat cuticles fat cream or nourishing oil.
Thoroughly blot a cotton pad or cotton swab in a specialized gel polish remover. Press it against the nail plate.
Wrap a piece of foil around your finger. So that you don’t have a question which side you need to wrap it with, the shiny side should be on top, and the matte part on the bottom, touching it with a cotton pad.
Perform the same actions with the rest of the fingers.
The agent must be kept for 15 minutes.
After this time, you need to remove the foil. You will notice that the gel polish has dissolved and softened a little and easily lags behind the nail.
Use an orange stick to remove the remnants of the coating from the nail plate.
If you notice that a small amount of shellac remains on the nail, then you need to take a polishing nail file used to grind the natural plate of the nail.

If, after carrying out such actions, you notice a transparent base on the nails, then use a cotton pad dipped in nail polish remover.

With acetone

If there is no special gel polish remover, then you can use ordinary acetone. For this:

Pour liquid containing acetone into a shallow container.
Cut off the shiny layer.
Treat the cuticles and the skin around the nail with a fat cream or cuticle oil.
Dip your fingers into the acetone so that they are completely immersed in this liquid.
Hold your fingers for 7 - 8 minutes.
After this time, the gel coating should soften and easily lag behind the nail plate.
Use an orange stick and buff to remove gel polish residue.

Using this method, you must be extremely careful, since acetone has a very negative effect not only on the nail, but also on the skin, drying it out very much.

Specialized sets

You can also remove shellac if you buy a specific set for this operation.

It consists of the following components:

orange sticks;
sponges in the form of pockets;
special gel polish remover.

The withdrawal procedure is as follows:

Wash your hands thoroughly with soap, to degrease them.
It is necessary to moisten the sponges with gel polish remover on the side that will be in contact with nail plate.
Place your finger in the pocket so that the wet side touches the nail.
It is necessary to fasten the cover tightly with Velcro, carefully fixing it so that it does not sleep.
After 10 minutes, you can remove the pockets. The gel polish should soften and come off in chunks. Use an orange stick to remove residue.
At the end of the operation, treat the cuticle with cream or oil.

First remove the shellac from one hand, then from the second. Thus, it will be more convenient for you to carry out this procedure, since one hand will be completely free.
If you did French manicure, then you need to keep the cotton wool with gel polish remover on the free area of \u200b\u200bthe nail without using foil a little longer, since a thicker layer of varnish is laid there.
After fixing the foil around the nails, place the pens with your palms down, slightly raising your fingers. These simple actions will help the fumes to collect around the nail plate without adversely affecting the epidermis of the hands.
If you do not plan to immediately re-coat, then it is recommended to carry out a series of procedures that can quickly restore the condition of the nail plate. It can be various salt baths, applying special caring oils, enamels or other products to the nail.

As you can see, the procedure for removing gel polish at home is quite simple.

The main rule is to be extremely careful and take your time. If you strictly follow the instructions, then you should not have any difficulties.

How to remove gel polish at home, see the following video.

The type of application, developed by an American company, very soon topped the top nail procedures. The girls immediately appreciated the convenience of using shellac. It is fast, easy to apply, and the nails remain well-groomed and beautiful for a long time.

Is it possible and how to quickly remove gel polish or shellac at home with ordinary acetone or nail polish remover? Or do you have to go to the salon to do it? Can! We'll tell you how.

general information

Shellac allows you to diversify manicure design, apply different patterns and decorative elements, experiment with a classic or colored jacket.

The procedure replaces the usual varnish coating and even extensions. Compared to the latter, shellac is more gentle, even on short nail plates it looks quite impressive.

Application procedure is more expensive regular manicure with painting, but the result is worth it.

Girls do not save, happy going to the master. After almost an hour, the hands become well-groomed, and the nails become elegant.

The only thing that can upset is another trip to the salon to remove shellac. The procedure takes time and money.

But what if for some reason your master does not work, and the manicure already looks completely unpresentable?

For such cases, the most resourceful girls and fashion bloggers began to experiment. Turned out to find a way Shellac removal it's not that hard on your own.

All necessary tools everyone has a home. Among them are conventional lacquer removers., some cling film and your patience.

Removal with foil

To better imagine the procedure, let's see how professional nail masters do gel polish removal.

In their practice they use:

A special liquid that dissolves varnishes.
Professional disposable sponges, more like miniature bags. They are tightly attached to the nails.
Wooden orange sticks.
Professional nail file.
Cuticle oil.

All this professional set can be replaced with household improvised means.

Cotton pads or sponges will be used as bags. We will fix them with ordinary food foil.

An orange stick can be replaced with a pusher - a double-sided metal tool designed to push back the cuticle.

There is a pusher even in the most modest manicure set. And the last thing we need is acetone or nail polish remover but quite concentrated.

Our list of must-have tools for removing Shellac at home looks like this:

acetone;
pusher or orange stick;
foil;
cotton wool or cotton pads.

Before you begin, wash your hands thoroughly with soap and water. This is necessary to degrease them, which will allow the acetone to do its job.

If you miss the moment, then the shellac may come off poorly. You'll have to do it all over again after a while.

The instruction is as follows:

We form sponges from cotton wool that will cover the entire nail plate.
Cut the foil so that you can wrap your finger with it.
We begin to dip the cotton wool into the liquid in turn, put it on the nail, wrap it with foil.
Funny compresses should be kept for up to 15 minutes.
Watch your favorite movie for now or think about what other manicure you can do.
You can massage your fingertips a little.

Don't be scared when you see your nails after the cotton has been removed. They will look unsightly, as if you have been walking with a manicure for a long time, but there is simply no time to remove the varnish.

It is possible that Shellac will not be completely removed. A special wooden stick or pusher will help here. Carefully remove any leftovers.

It's good if you have a home nail file. It can be used too. After suffering stress, your nails need to be restored.

Wash your hands again with soap and apply moisturizer or nourishing cream. You can also use a special cosmetic oil.

The video shows how to properly remove shellac from nails in this way at home, because it is easy to remove it yourself at home:

Removal with acetone

How can you remove shellac at home without foil and how to do it at home? Acetone.

The second method has its advantages and disadvantages. Herself the procedure is much easier.

You will be able to observe directly the process of destruction of the varnish, which will allow you to control the process.

But this method is not so gentle. We will need:

a small container where you can hold both hands at the same time;
nail polish remover;
cream;
orange stick, pusher;
bafik or grinding nail file.

Before washing off shellac, wash your hands thoroughly.

We cut off the top shiny layer of the coating with a nail file for grinding.
Pour liquid.
Lubricate the fingers with oily cream.
Dip your fingertips into the container. We hold for about eight minutes.
Remove the softened gel polish with a pusher.
Wash your hands again, apply cream.

After removal, it's time to think about a new manicure. Very interesting design happens if you do

Professional masters are sure that in 90% of cases it is not shellac that spoils nails, but its improper removal. Peeling off, scraping off the layer, using aggressive or inappropriate products can ruin not only beauty, but also health. The nail plate, cuticle, skin on the fingertip suffer from incorrect actions. Cracks, peeling appear, the road to microbes opens. But all this can be easily avoided if you remove shellac correctly.

Content:

Professional salon products

Shellac manufacturers produce special solvents that effectively and quickly soften the resistant coating. They are also called removers. The layer is removed by several scrapers with a special spatula. No pieces remain, only clean and light nail. Not all of them work equally effectively. It is advisable to buy shellacs and solvents from the same company.

Popular liquid removers:

Severina;
Lafitel;
match;
perfect.

All of these products are sold in bottles, require wetting cotton wool, wrapping the nail in foil, or using special tips. But now on the market you can find special removers in bags. Inside there is a soaked napkin. The use is extremely simple: tear off the tip of the bag, stick your finger in, hold for the specified time, remove the coating. This know-how was first invented by Chinese manufacturers, and now some European firms have adopted the idea.

Professional removers will help to remove shellac at home, there is nothing difficult in this, but it is not always possible to buy special solvents. Sometimes it’s just a pity for money, since one procedure requires a small amount, and not a whole bottle. It is in such cases that women resort to alternative means.

Home alternatives to professional solvents

Before using any solvents, it is advisable to cut off the top protective layer - the fixer. Thanks to this reception, the substances will quickly penetrate and act. A regular file or buff is suitable for removal, the size of the abrasive does not matter. After that, solvents are applied. It is recommended for a beginner to treat hands alternately, since application, wrapping takes a lot of time, there is a risk of overdosing the solvent on the nails.

Important! Cuticle skin suffers from chemicals. Therefore, before the procedure, it is advisable to lubricate the area around the nail with a greasy cream or any cosmetic oil.

Acetone and liquids with it

One of the most used home methods. Despite the harm of acetone and conventional nail polish removers based on it, girls regularly resort to it and very successfully remove shellac. It should be noted right away that the product negatively affects not only the nail plate, but also the skin of the hands.

To work, you need to prepare cotton wool, pieces of bandages or chopped discs. It is advisable to immediately choose the size so that the plate is completely closed, but not the skin around. You will also need a stick or spatula (pusher), but without a sharp edge. The shellac should scrape off, but not cut off. Cut pieces of foil in advance into which it will be convenient to wrap the tip of your finger.

How to easily remove shellac at home:

Moisten the prepared cotton wool in acetone solution, but not all at once. First one, slightly squeeze, attach to the nail.
Wrap the tip of your finger with a piece of foil, press down. Leave for 10-15 minutes.
Gently unfold the first finger, check the shellac with a stick. If the coating has softened, then attach the spatula to the base of the nail and scrape off to the tip with light pressure.
If the shellac is not softened, then stand for a few more minutes, remove again.
After the procedure, walk on the plate with a buff to remove small particles of varnish, polish the nail. Then wash your hands, apply a caring cream or rub cosmetic oil on the nail plates.

Important! In diseases of the respiratory system, for example, bronchial asthma, it is worth abandoning such experiments. In addition to acetone, liquids additionally contain fragrances and dyes that will worsen the situation.

Soaking in liquid with acetone (without foil)

This is a rather aggressive way that harms the skin and nails. But it can be used if there is no foil or fleece, for example, you have to remove shellac in camping or other difficult conditions. It is not recommended to use often, as the solvent covers the nail plate from different sides.

For the procedure, you will need any nail polish remover with the addition of acetone, but in no case a pure solvent. You also need a small bowl for soaking your fingers, a pusher or a stick of orange tree, fat cream (Vaseline, oil).

Step-by-step instruction:

Pour regular nail polish remover into a bowl.
Lubricate the fingers around the nail with a greasy cream or other alternative product.
Dip your nails in the bowl and wait. The exposure time will directly depend on the quality of shellac and the amount of acetone in the product. Periodically check the coating for looseness.
Remove loose layers with a pusher.

After this procedure, wash your hands with soap. It is also desirable to make a restorative bath with sea salt, oils. Or apply a caring hand mask, then apply cream and oil to moisturize the cuticles.

Important! This method is not suitable if there are wounds on the hands, it has recently been edged manicure or there is irritation. Immersion in an aggressive solution will cause a strong burning sensation, turning a small wound into a big sore.

Other means

You can find ways to remove gel polish with alcohol, solvent-based varnishes, fatty oils and cream. In fact, these techniques only help when using a low-quality coating that has outlived its useful life and is already starting to peel off by itself. To soften and remove the layer in this way, it will take a long time to soften. But if the question arose about the mechanical peeling off of the layer, then alcohol or fresh layers of varnish will still help to facilitate the process.

Salon and home sawing: advantages and dangers

Sawing shellac is now considered the safest way to remove the coating. But only with an emphasis on the fact that the procedure is trusted by a professional master. A beginner can easily touch his nail, as it is still difficult for him to determine the boundaries.

How to cut shellac:

Fresa. It is a nozzle in a hardware manicure tool. Allows you to remove a layer of shellac very simply and quickly.
Files. Used ordinary nail files for manicure. The process can be delayed, it all depends on your own skills.

Another difficulty in cutting is the determination of the desired abrasive. In order not to injure the nail, you need to start with a large file or cutter. As soon as color coating will be removed, you can take a fine abrasive of about 150 grit.

Restoration of the nail plate

Restoration of damaged nails is a long process, most often the former appearance and health returns only after the damaged areas have completely grown back. It is very important that the stratification does not progress further. For this reason, it is necessary to strengthen the care of nails and hands.

Common Procedures:

baths;
masks;
creams;
cuticle oils.

The easiest way to avoid problems with nails after shellac is to apply it well and remove it carefully. This is especially true for beginners. You do not need to subject your own nails to numerous workouts, especially on the hands. If it is not possible to find a model, then in winter time you can learn to walk. There, the nail plate is stronger, excessive sawing will not hurt, and sometimes it is even necessary.

Video: Removing shellac with a solvent at home

A sustainable innovative shellac manicure coating, which lasts from two weeks to a couple of months on nails, has categorically conquered the modern market for nail art products. But gel polish must be removed periodically - to apply a new decorative layer or correct the shape of the nails. How to remove persistent gel polish at home, and how to use foil?

What you need to remove varnish

To remove gel polish from nails, manufacturers offer a special tool - a remover. It contains acetone, which is necessary to dissolve the natural resins contained in shellac. Removing gel polish at home with foil and remover is a simple procedure, for which you need to have:

Special tool for removing shellac (remuver).
Foil (buy immediately a roll of food, wrapping - it will come in handy for a long time).
Orange sticks (manicure spatulas).
Grinding file, cotton pads.

If you don’t have a remover on hand, and you don’t know how to replace the branded product, you can use nail polish remover to remove the coating, but a composition without acetone will not work.

shellac removal procedure

Sometimes, instead of foil for removing gel polish, a patch, caps, manicure bottles are used, into which a remover is poured and fingers are dipped for a while. The whole process of removing the old coating with foil can be divided into three main stages, each of which can be performed at home:

preparatory step. The top top layer of gel polish must be sanded to give the remover good access to the decorative and base coat. With gentle movements with a nail file, remove the fixing top.
Nail wrap. This requires foil. How to use it? You should first prepare small pieces of foil from a roll, then moisten a cotton pad in a remover, attach it to the size of the nail plate and wrap it with foil, creating a “greenhouse effect”. The size of the foil is approximately 7x7 cm.

Nail cleaning. About ten minutes after wrapping, the nails can be released from the foil. Softened shellac is easy to remove with orange sticks or use a manicure spatula instead.

After completion of the procedure, nails and cuticles can be treated with a nourishing cream. The process of removing gel polish using foil takes a little time, and it will not be difficult to do it at home.

Removing shellac by other means

In the event that you do not want to use foil, a logical question arises, how to replace the foil when removing gel polish? You can more quickly remove gel polish without foil using special standard size branded wrappers. They are impregnated with a shellac remover and are simply put on each finger. After the time recommended by the manufacturer of branded wrappers, they are removed from the nails and the gel polish is removed with orange sticks. This method is much easier - you do not need to cut the foil for each finger.

How to replace the foil if there are no branded wrappers? Instead, use a medical plaster, which is in every home first aid kit. Removal of gel polish without foil is performed according to the above scheme. If you decide to use only improvised shellac removers, before using acetone, you must generously lubricate the skin around the nails with a greasy cream so as not to damage the delicate layer of the epidermis. Acetone vapors are not safe for the skin, and wrapping should be done for at least 10 minutes. During this time, delicate fingers may suffer, which side of the foil you do not seal them, and the cream will protect the skin from the penetration of acetone.

Gel polish is an excellent durable nail polish that is not so cheap, since shellac requires a starter kit and an ultraviolet or LED lamp to apply. If you can afford such a manicure, then you should acquire special gel polish removers in advance, and experiment less with your nails, using instead of branded compounds, for example, liquid without acetone.

To prevent undesirable consequences and not to spoil the nails and skin on the hands, you should listen to the advice of manicure masters:

Gel polish cannot be removed simply mechanically. The base layer is securely attached to the nail plate, so the nails will be damaged by the sharp side of the tool.
Which side to remove the gel polish with foil does not matter, since the foil is used to soften the gel polish without air access. Which side you turn is completely irrelevant.
After the procedure, use restorative creams, use baths with iodine and lemon (a few drops each). You can immerse your hands in them for 15 minutes to nourish your nails.
If you do not know how to replace the foil, you can use ordinary cling film - it also does not allow air to pass through. Which side to wrap around your finger, it does not matter.
To remove gel polish, orange sticks can be replaced with a plastic manicure pusher.

Listening to the authoritative opinion of the masters nail service, each owner of beautiful marigolds will be able to remove shellac on their own. But still, remove shellac with tools, compounds and devices that are designed for this.