Somehow they bought a lamp for drying the gel, but only with a power of 9 w. They did not use it for long, because after a certain time I realized that I needed much more powerful. Therefore, I had to order for 36 w. The gel dries, of course, much faster than 9w, about 2 minutes. The 36w and 9w lamp differs in that the first one has 4 lamps of 9 w = 36w and a larger body.

This lamp came to me in bubble wrap, which was packed in ordinary cellophane. Additional cardboard inserts were installed in the corners. I additionally asked about this so that the corners would not be beaten off during transportation to my address, because our parcels are thrown at random at the post office. I think everyone has already heard about this. As a result, she came safe and sound, there was not a single scratch.

The quality of the plastic is good. I was also pleased that it does not stink of anything, as we are used to.
from China goods to the corresponding peculiar smell. Even when plugged in, it didn't smell.
Having twisted it in my hands and carefully examined it, I did not reveal any defects in the molding of plastic, as well as backlashes and careless assembly. There are no huge gaps at the junctions of the case, there are no sharp plastic edges. The case itself is matte plastic with a slight roughness, streamlined.

Having removed the factory film, which was glued on the internal reflectors, there were no various kinds of scratches and other errors (irregularities, bulges, etc.) on them.
The reflectors are held tight, do not wobble or fall off the body.

She has two modes: this is the main constant and the timer button, which sets 120 seconds and then turns itself off. Very convenient in my opinion, I do not have to think about the drying time. I turned on the timer, turned off and everything is ready, the gel is completely dry.

The gel polymerizes evenly both in constant mode and on the set timer for 120 seconds. It does not take up much space on the table, it is quite compact, 245 x 230 x 90 mm in size. By weight, it is not very heavy ~ 1 kg with a penny. Of course, it is a little more than nine-watt, but not much. Especially in terms of dimensions, I did not go in cycles, my table is large)).

The timer button itself is red, the on / off button is black. They are installed in the case quite reliably, they do not stagger and do not fall out. So, to turn on the permanent mode, you need to press the on / off button in the position towards you, that is, on the icon of two circles. If you need a timer, then it turns on as follows: by first pressing the on / off button. away from you (the inscription Timer On), and then the timer button once and it all turned on. After automatic shutdown, you will need to press the on / off button to the “middle” position.
I’m also satisfied with the power cord, it’s enough in a dense braid, the plug itself is also normal, nothing like Christmas tree garlands made in China. The power cord coming out of the lamp housing has not yet broken during the entire period of use, the entire braid is intact. The plug is standard, for our sockets.

At the bottom of the case, rubber pippies are installed at the corners to prevent slipping on the table, they are fixed to the case normally, perhaps they are just well glued or inserted into the case, I don’t know how there was no desire to pick them for the sake of interest. The main thing is that everything is still in place, nothing has fallen off.

The tray itself, where the hand rests, is retractable. Apparently this was done for a more convenient replacement / installation of lamps in their sockets, as well as for wiping from debris, etc. I soiled it, took it out, wiped it and that's it. It moves effortlessly, along specially molded grooves on the left and right sides.

The lamps came in a separate cardboard package, they were put inside the lamp (in the place for the hand). So that they come whole, without marriage (everyone is on fire). Were sealed with a thick layer of bubble wrap

uv. lamp UVSalon Professional SP-1788 36w

General instructions:

UV lamp for nails. Promotes the polymerization of any UV-

light-curing gels, UV-curable acrylics and UV-curable

top coats. For stationary use. Thanks a lot

power of UV lamps and a built-in high-speed fan helps

perform manicure procedures quickly and comfortably.

SPECIFICATIONS:

Model - SP - 1788.

Production - USA.

Supply voltage 220-240 volts (50 Hz)

Power - 36 watts (4 bulbs of 9 watts each).

Pure ultraviolet. Emission spectrum - 320-400 nm

The service life of one set of UV lamps is 1000 hours (with intensive

daily use 6 months)

Electronic timer with 8 positions:

30 sec, 60 sec, 90 sec, 120 sec, 150 sec, 180 sec, 210 sec, 240 sec .

Ideal for polymerization of any gels. Gel polymerization time -

2-5 minutes (follow the instructions of the manufacturers of UV-cured

polymers)

Equipped with a fan (separate fan + UV light and fan) to cool and speed up the drying of nail polish, gel polish, shellac, nail extension gel.

Retractable (removable bottom).

Color: white-pink.

Dimensions: 31.6 X 25.4 X 14.2.

There are mirror reflectors inside the UV lamp body, which allows to reduce curing time.

Suitable for professional and home use.

Induction lamp. It is more reliable than electronic. Bulb replacements are much less frequent.

Induction lamp (lights flash when turned on) reliable to use. It has stylish design. Equipped with a fan for fast baking of gel and varnish coatings. Mirror coating inside for uniform curing. Retractable bottom, well fixed and does not leave during transportation. The only downside to this lamp is its weight. It is not intended for frequent transportation, but rather for work in the salon or at home.

This lamp also has a unique built-in timer memory and save function. This is an extremely convenient circumstance for the constant, regular work of a manicurist. You only set the required amount of time only once, and it will not go astray the next time the lamp is turned on, that is, there will be no need to set the timer several times. This is a very convenient feature of this UV lamp for everyday use by a manicure master. And the interesting, super-creative design of the SP-1788 lamp will effectively blend in, diversify and complement the interior of the workplace.

Manual:

1. Insert the plug into a direct power outlet.

2. Press the (ON/OFF) button to turn on the lamp.

3. To activate the inclusion of UV lamps and start the timer of the device, press the button

"Light bulb icon". To turn off the fans, press the "Icon

fan". To adjust the time, use the buttons with the "icon + and -"

In order to (if necessary) turn off the UV lamps earlier

timer expires, press the "Light bulb icon" button again.

3. After using the lamp, press the off button, then unplug the power plug.

4. UV lamp is used by nail technicians.

Not intended for other uses.

Lamp replacement
Old UV lamps lose their power gradually. If it takes longer than usual for the gel to harden, turn off the lamp, let it cool down and remove dust and dirt with a dry cloth. If this does not help, the lamps must be replaced. It is necessary to replace the lamps after 3000 hours every 6 months.

Disconnect the lamp from the power supply.
- Turn the device over.

Safety precautions:

1. The maximum wavelength is 370 NM (this wavelength is visible light, which is not harmful to eyesight, but it is not recommended to look into the lamp for a long time.

2. To avoid short circuit, do not allow moisture to enter, do not use the lamp near water sources.

3. To avoid performance degradation, do not shorten or extend the use of the instrument.

4. To avoid accidents, please keep the lamp out of the reach of children.

5. Replace spare inner lamp every 6 months.

6. This product is intended for use in an electrical network with a voltage of 220 V.

KEEP OUT OF CHILDREN!

The device must be checked, serviced or repaired in

nearest service center. Self-repair is not allowed.

buyer.

Do not use the device with a damaged electrical wire. In his case

damage, de-energize it immediately. If the wire is damaged, then it must be

replaced by the manufacturer or a qualified person

service center to avoid accident.

Avoid prolonged direct exposure of the rays from the UV lamps of the device to the eyes!

Without special tools and fixtures, it is impossible to make a gel coating for nails. by the most an important step in gel manicure is drying which is carried out by a special device with ultraviolet radiation. The variety of such devices today is very large and it depends on what type of lamp is used in the device.

What it is

The device for drying gel polish is a small device with a niche for fingers, inside of which there are lamps. These lamps generate ultraviolet radiation, which changes the molecular structure of the gel or gel polish and contributes to its rapid hardening.

What types exist

With the development of lighting technology, several types of devices for drying gels and gel polishes have appeared, which equipped different types lamps and have different specifications . Our short review will help you determine which lamps are best for drying gel polish.

Gel polish starter kit with lamp

The set includes:

• nail dryer;
• nail files and buffs;
• base and top;

• several types of gel polish;
• means for preparing nails for coating;
• gel polish remover.

Gel polish dryer with fluorescent lamps

Main characteristics:

• low price;
• service life up to 10,000 hours;
• the lamp has a limited number of inclusions;
• strong heating of the lamp and device (up to 50 degrees);
• by the end of the lamp life, gel polish may not dry well and curl;
• sensitive to voltage drops in the network;
• the stroboscopic effect has a bad effect on vision;
• There are devices with electronic switching lamps and with induction switching lamps.

Devices with electronic switching lamps have a cheap price, weight up to 1 kg, instantaneous switching on, but they react to power surges in the network. Appliances with induction lamps have more high price, weight up to 2 kg, switching on after a few seconds, but more reliable and not sensitive to voltage drops.

Gel polish dryer with CCFL UV lamps

Main characteristics:

• equipped with ultraviolet cold cathode lamps in the form of a spiral or zigzag;
• service life up to 80,000 hours;
• lamps do not get very hot;
• energy saving;

• gel polishes do not curl during polymerization.

Device for drying gel polish with ice lamps (LED)

Main characteristics:

• have a high price;
• equipped with LED lamps;
• service life up to 100,000 hours;
• energy saving;
• profitability;
• environmental Safety;
• no flickering effect harmful to the eyes;
• skin safety;
• instant turn on;

• unlimited number of inclusions;
• LEDs do not heat up;
• do not burn;
• polymerize in 10-30 seconds;
• do not cause burning during polymerization;
• do not polymerize solid gels.

CCFL+LED hybrid type gel polish dryer

Main characteristics:

• have a high price;
• equipped with LED lamps and CCFL lamps;
• service life up to 100,000 hours;
• energy saving;
• profitability;
• skin safety;
• instant turn on;
• unlimited number of inclusions;
• do not heat up;

• do not burn;
• polymerize several times faster than other types of devices;
• do not cause burning during polymerization;
• even a thick layer of gel polish does not curl during polymerization;
• polymerize including solid gels.

How to use a lamp for drying gel polish at home

The use of devices for drying manicure with gel polish is very simple:

How to choose the right lamp for drying gel polish

When choosing a device for drying gel nails, we recommend, first of all, focus on its convenience and quality of the result. Here are the basic principles for choosing these devices, which you can focus on when buying:

1. Choose a well-known, already trusted manufacturer.
2. The high price indicates the use of new technologies.
3. Usage LED lamps will provide you with energy savings when using the device frequently.
4. Fast polymerization will save time.
5. Long service life of the lamps in the device will ensure saving money on replacement.
6. Easy lamp replacement is ease of use.
7. The absence of heating of the lamps and the device itself will ensure the safety of its use.
8. The possibility of polymerization of any gel coatings will diversify the types of manicure.
9. Lamp type renders influence on the quality of polymerization. For example, LED lamps cannot polymerize solid gels.
10. The presence of a timer will allow you to strictly observe the technology of manicure with a gel coating.
11. Lack of sensitivity to voltage drops will ensure stable and uninterrupted operation of the device.
12. Retractable platform will allow the gel coating to dry on the toes as well.

Practical and durable gel polish, always up-to-date biogel and fashionable colored gels cannot be fixed on nails without a special lamp. These small cute devices now "live" not only in beauty salons, but also in the homes of many craftsmen who want to do beautiful manicure without extra costs. Let's talk about which lamp for drying nails is better to buy.

Types of lamps for manicure

• classic UV lamps. Many people think that this type of dryer is outdated. Indeed, they are bulky, dry the varnish longer than others, more modern appliances and light bulbs need to be changed every six months on average. However, they also have advantages: such dryers are “omnivorous” (they polymerize extension gels, gel polishes, acrylics), are affordable and easy to care for. They are still good for beginners and home manicure.
• LED drying work with LEDs. Such lamps provide uniform polymerization. In addition, LEDs have a service life of 50,000 hours and are designed for at least 5 years of operation. However, the emission spectrum of such lamps does not allow drying all types of materials. They are ideal for those masters who work only with gel polish and biogel.
• LED+UV combine the advantages of the first two devices. This solution ensures fast and high-quality polymerization of any coatings for shellac and nail extensions. But it must be remembered that the UV elements in hybrid appliances must also be replaced frequently, otherwise the drying efficiency may decrease.
• CCFL+LED. In them, the led elements are supplemented with a CCFL spiral tube emitting ultraviolet. It is filled with gas, so it does not heat up, consumes very little electricity and practically does not wear out over time. Such devices are the most progressive, provide fast and efficient drying of nails without requiring replacement of consumables. But they are also the most expensive.

The best nail dryer lamp manufacturers

With the development of the industry nail service The range of drying lamps is becoming ever wider, and the appliances themselves are becoming ever more productive. At the same time, today it is no longer necessary to pay big money for a good device, even if we are talking about professional drying for the salon.

We divide all manufacturers of lamps for manicure into three groups:

• high-class professionals focused on status beauty salons. Basically, these are "Americans": OPI, Gelish, CND, Harmony and others. Their lamps for drying nails are expensive and prestigious. However, some of them work well only with materials of their own brand. And in general, they cannot compete with functional, efficient, "omnivorous" and inexpensive devices of Russian and Chinese production.
• "Middle peasants", the lamps of which are relatively inexpensive and suitable for both home and salon use. Basically, these are domestic or Russian-Chinese brands: JessNail, RuNail, Planet Nails, Polaris, Irisk. The British brand can also be attributed to them. Solomeya. Their virtues are good quality, nice design and the possibility of warranty service. Such lamps for drying nails are most often chosen by beginners and small salons.
• Many Chinese manufacturers whose products can be purchased on Aliexpress and similar sites. With the function of drying gel polishes, they do a good job, but they are very cheap. However, among Chinese lamps there are their own leading brands that break all records in popularity: SUN/Sunuv and Diamond. They are reliable, efficient and affordable, have wide functionality, are purchased both for home and for nail salons. They can be bought not only in China, but also in Russia, with warranty service.

Having bought a UV lamp for drying nails, it is not always clear how to use it. But the safety rules must be followed. That is why it is so important to get to know them.

The UV lamp for drying nails is a device consisting of a body, a control panel and several bulbs that have an radiation range of A and convert ordinary electricity into ultraviolet radiation. This device is used to polymerize the gel layer on the nails. In addition, it is often used for drying varnish. Thanks to such a lamp, it hardens in just a few seconds and lasts for many days.

Lamps for drying nails are produced in a variety of variations. They differ in power, design and light intensity. However, the rules for using them are the same for everyone. Observing them, it will be easy to operate such a device in a safe mode.

The lamp for drying nails before use must be wiped with a dry cloth from dust or a brush. If such a procedure is neglected, then the device will not work with high intensity. And all because there will be a layer of dust on the lamps, preventing their normal radiation.

In no case should you use a lamp if several light elements have burned out in it. Otherwise, there will be no effect from its use, since the device will provide a small radiation power. As a result, it will take not a few minutes to dry the gel, but several hours, and eventually it will not completely harden to the end. Accordingly the quality artificial nails will leave much to be desired. Therefore, if it is noticed that one or more lamps have burned out, they should be replaced. It is not difficult and is the same procedure as changing the incandescent elements in sconces and lamps. Here, one more important point should also be taken into account immediately - it is necessary to replace the UV lamps according to the service book every 2000 hours of use. This must be done because, during use, their intensity of ultraviolet radiation is very much reduced. In addition, the use of light elements that have already served 2000 hours is not safe. They may crack or split when used. As a result, this can lead to injury to the hands.

If, after using such a device, it was noticed that gel residues stuck to its body, then they must be removed. In no case should this be done with a solvent. It negatively affects the body of the device, corroding it. Therefore, you should take some sharp object and try to carefully remove the gel with it. It is recommended to carry out such a cleaning procedure after each use of the UV lamp. This will keep the device completely clean.

For safe use UV lamps must be disinfected. To do this, you need to use special alcohol-containing products. They need to be applied to a rag. You can not spray them on the lamp, as the product can get on the contacts and the device will burn out.

If it is noticed that strong pollution has accumulated on the light elements in some places, this may be due to the fact that the owner does not wipe it from dust, then you should not take wet wipes and try to get rid of them. This can adversely affect the integrity of the lamps, as they are very fragile. Here it is recommended to turn them just the other side.

Often, the owners of such devices can observe how the lamps flash when turned on. And they always have a question: what is wrong with the device? In fact, this is normal, since the bulbs will turn on through the chokes. Therefore, it is unnecessary to replace them or look for any problems.

If it is noticed that when using a lamp, the polymerization process takes more than 120 seconds, then you need to take the device to the workshop. Most likely there are some problems with it. They must be eliminated, otherwise the operation of the device will take place in an unsafe mode.

During the use of the UV lamp, some owners may notice over time that it begins to crackle a little. This is a sign that some element in the device has burned out or is faulty. Do not look for the cause of the problem yourself. It is better to entrust this work to a specialist.

Do not use the UV lamp if it has been exposed to liquid. This can lead to its complete failure. Here it is necessary first of all to try to remove the liquid using napkins or a cotton rag. Then you need to leave the device for several days so that the drops of liquid can evaporate. Only then can it be used again. In this case, everything possible must be done so that henceforth it does not get liquid.

Under no circumstances should the UV lamp be dropped. This can lead to serious damage and failure of the device. As a result, you will need to buy a new one or pay for expensive repairs.

Do not use the device constantly. It must be turned off for at least 10-15 minutes. Otherwise, it may overheat during prolonged use. As a result, the contacts in it will melt and its repair will be required.

If the UV lamp emits bad smell rubber, you must immediately disconnect it from the power supply. Such a problem is evidence that the cord of the device is severely damaged or has poor contact with the outlet. First, move the lamp to another power source. If the smell reappears after switching on, then the cord must be replaced.