Knitted boots crocheted or knitting. Crocheted boots: a master class with a video and a step-by-step explanation of the process with photos. Knitted summer boots

Crocheted boots on felt sole will be soft, warm and beautiful. Felt insoles do not knock on the floor, thicker than the knitted sole and significantly save thread and time spent knitting.

To create such knitted boots we will need felt insoles (they are the most inexpensive and are sold in shoe stores).

You can choose the yarn color and composition of the yarn yourself; we use the handmade pehora, high-volume acrylic, 50 g / 200 m long. In total, about 100 grams of yarn will be needed for boots.

Take the hook number 2. Also, to prepare the insole, we need kapron threads, of course, yarn can also be used, but it will quickly wipe away from the floor, so it’s better to take kapron threads, which are not very thin, can be found in fishing and hunting or hardware stores.

Master class: how to tie boots

Using a needle with a thread around the insole with a loop seam around the edge.
By the way, kapron threads very easily creep out of the nodule, so it would be nice to melt their tips to the nodule.

Then the boots themselves begin.

Bottom
1 row. We start from the middle of the heel. We tie the entire perimeter with crochets.

We got 130 sbn (single crochet).

2 - 4 rows. 130 sbn.
5 row. 130 - 1 \u003d 129 sbn. On the toe itself, in the middle, we will reduce the loops by one. After the column, pull one loop on the hook, then another one and knit all three with one loop.

Then we knit as knitted.
6 row. 129 - 2 \u003d 127 sc. The reduction will be repeated on the toe, but not just in the middle of the toe, but at the corners that are on the insole. About 6 columns will remain in the middle, and they must be kept invariably on other rows.

7 row. 127 - 2 \u003d 125 sc. Abbreviations are made there.
8 row. 125 - 2 \u003d 123 sb. Reduce the same.
9 row. 123 - 2 \u003d 121 sbn.

10 row. We will also begin before the moment when we made two row cuts, right after the cut, we will make 1 joint. loop into the next column of the row in order, turn around, make 1 pass and knit the same 6 unchanged columns on the toe. Let's make another loop pass and one connection. loop into the next column in order and expand the slippers. We will make 6 front columns, again we will reduce and continue the row to the end.

11 row. We get to the toe, 2 shortening, 1 joint venture (connect. Loop), expand, 6 sbn, 1 shortening, 1 joint, back to the front, 6 sbn, 1 shortening and extend the row.

12-18 rows. Repeat the 11th row.

19 - 21 rows. 72 sb.

Shin.
22 row. Our series begins and ends on the heel. 4 runway (lifting air loop), then through the column we make 1 double crochet (sn), 1 air loop (run), 1 sn, 1 run. To the end of the row. we knit.

23 row. In each opening formed between the double crochet, we make a magnificent column.

24 row. Let's do it as 22 row.

25 row. Let's do it as 23 row.
26 - 37 rows. 4 runway, 1 sn, 1 run, 1 sn, 1 run, to the end.
38 row. In the gap between the double crochets, we make 36 ps.
39 row. Again, the series is as follows: 1sn, 1 vp, 1 sn, 1 vp, etc.

40 row. Repeat row 38 with ps.
41 row. In this row, we make double crochet columns in each loop of the underlying row 72 sn.
42 row. We will complete the boot 72 sbn, cut and hide the thread.

Finish.
For decoration, we have prepared a little gray and white yarn of the same thickness. At the end of the thread, it is very convenient to make a loop and apply it as the first loop.

In the net part of the tibia, preferably from the back, we begin to stretch the loops with a gray thread and knit through the net.

The gray track is embroidered.

Let's do the same with the white thread in the remaining empty openings.

Now decorate the sock. On the bottom row of double crochets, we sew a row with white thread.

We go through the toe, fasten and cut the thread.

The second boot is done in the same way.

Cord and tassels.
We cut several threads at once about 80 - 90 cm and fix one end with a bundle.

We weave a pigtail and also tie another tip. You can immediately make a second pigtail.

We cut the threads for the brush of the length that we have determined for ourselves, but multiplied by two, we pass the thread inside with which we will tie the brush itself to the string. Put the lace on top of the bundle and tie it above the knot. The knot will slow down and the cord will not crawl out of the brush.

Spread the string around the string and drag across another thread.

We put one end into the boot, and you can repeat the other brush on the other end of the rope.

The boots are finished, you can measure.

Boots can be any color and with a pattern invented by you. It all depends on imagination and desire.

Knitted shoes Now it is at the peak of popularity among children and youth. Especially when it comes to knitted boots. To keep the boots in shape, choose a crochet.
Especially for Craft Lessons by Dean Kiselyov.

For knitting we will need: half-woolen or wool yarn in 100g 250m (this time I have 100% wool in 100g 200m), a set of 5 stocking knitting needles (I have number 2.5), felt insoles are larger than your shoe size (I I will knit socks on 38 rr, insoles I have 39 rr), a hook for tying insoles, threads for tying insoles (you can use those that you will knit, or take a more durable cotton or nylon thread).

I don’t do calculations for knitting socks, just for children’s socks I’ll dial 44-48 loops, for women’s 56-60 loops, for men 64-68 loops (depending on the thickness of the thread).

On one knitting needle with the usual set I dial 60 p. + 1p for connecting in a circle.

The number of loops for an elastic 2n2 should be divided without a remainder by 4. Distribute into 4 spokes of 15p. on each and close in a circle.

I knit in a circle elastic 2na2, starting with 1 out. n, then to the end of a row of 2 persons. item, 2 out., last loop 1 life. Thus, I knit 25 rows (7cm).

26 row: we make holes for the lace, we start knitting a row with a crochet, then knit 2p. together persons., 2 persons. p., again yarn, 2p. together persons, 2 persons. n and so on until the end of the row.

27 row: all loops are front

We continue to knit in a circle. Conditionally divide the loop into 2 parts, it turns out 30p. front and 30p. back end. The beginning of the row is where we have the tail of the thread from a set of loops. For those who will knit exactly like I am attaching a diagram in which all the circular rows are indicated.

We begin to knit the first 30p. according to scheme 1 and continue 30p. knit according to scheme 2. A total of 13 circular rows. You can knit more, the socks will be longer, but the thread will take longer.

I knitted the first 7 rows of the scheme. This is a front view.

Back view

Here I knitted 13 circular rows according to the patterns

Now we will knit only the front part in a pattern in rotary rows, the first and last loops of the front part become edge, we do not touch the hinges of the back part yet. For my 38 size, I need to knit in rotary rows 16.5-17 cm in length. The total length of the patterned part is 20-21cm. For other sizes, add or remove 1-1.5 cm in length.

In the last rows, you can reduce several loops in a large braid, but I do not always do this, you can not reduce.

Here's what you should get:

The loops of the front end end with the wrong side, cut the thread, while the loops are postponed.

Getting to the knitting of the back of the sock. To do this, attach the thread to the left of the first edge loop of the front. The place of attachment of the thread is marked with a circle.

We start knitting the back part according to the drawing in rotary rows, pulling new loops from each side from the edge loops of the front part and turn them on.

In this photo I add a loop on the right side.

In total, we get 7-8 loops from each side.

This is how it turns out after knitting several rows.

We finish knitting the rotary rows from the side where the thread was attached, that is, the wrong side. We grab another loop from under the edge of the front part and begin to knit a circular row of front loops: first, we knit the back part of the loop, then from the remaining edge loops we collect new loops, then we knit the loops that we put off when we knitted the front part of the sock and we sew loops from each edge on the other hand.

View from above

Now I connect the sole and the toe, attach it with the needles, pulling the toe over the insole (first fasten the heel and toe, then in a circle)

I hook the connecting posts. Decorated this time with a lace and a flower. You can make pompons.

Beautiful and fashionable knitted boots are a trend of the last few years. They not only look amazing, but also very convenient to use. But the price of such shoes to many fashionistas seems sky-high. Therefore, you need to connect them yourself.

Types of Knitted Shoes

We are all used to crochet knitted boots as a substitute for slippers: simple, comfortable, fun, but not smart. In fact, indoor boots are a small part of a huge number of elegant knitted shoes.

Craftswomen have long learned how to make warm autumn boots that protect legs well from the first cold weather. But you need to wear them in dry weather, so as not to get wet.

Knitted summer boots also look beautiful. They emphasize the harmony of the legs and hide their minor imperfections. At the same time, there are several styles of such shoes. The most common are with a wide boot and high stocking boots.

High-heeled fishnet boots simply look unsurpassed on their feet. They are perfect for everyday wear at work, and as a highlight of the evening outfit.

All this wealth of models and styles opens up enormous opportunities for craftswomen who strive to improve their creations, focusing on other people's experience.

Sole preparation

Not a single knitted boot can do without a sole, whether it be indoor shoes or a model for the street. Therefore, it is necessary to properly prepare it so that then the boots serve as long as possible.

Consider the option with a felt insole, and then clarify the nuances for the street sole.

At the beginning of work in the insole it is necessary to make holes around the entire perimeter. The distance between them is arbitrary, depending on the thickness of the thread and the size of the hook. Holes can be punched either with an ordinary awl, which will complicate further work a little, or with a special device that many craftswomen working with fabrics and skin have.

We begin to braid our sole. For this purpose, a single crochet is ideal. We do everything very carefully, as this forms the basis for our boots. And the further service life of the product depends on its quality.

If you take the sole for street shoes, then the holes in it are better to punch not from below, but from the side. This will extend the life of the thread, which is quickly rubbed from contact with hard road surfaces.

Indoor Knitted Boots

When the sole is ready, we can begin to work. To begin with, we pay attention to the fact that boots can be knitted both immediately from the sole, and then sew it on or tie it when the main work is completed.

The model shown in the photo is made completely with single crochet, so that the shoes turn out to be moderately warm and light.

We carry out 4-5 rows, starting to knit from the first row, which we made on a felt insole. At the same time, we do not add loops to get a good and high side.

The next step is knitting the top. First, we do 2-3 rows in a circle, and then another 1-2 rows only in the front of the future boot. When the desired width is reached, close both edges and connect them together to make a knitted slipper.

We will get a boot if around the formed armhole for the foot we tie a few more rows of single crochet posts. Their number depends only on the desired height of the "freebie" of our shoes.

Simple summer boots

Here are some more simple knitted boots. The description of working on them is a bit like the previous model, but there are some nuances.

They also fit in single crochet columns. Only now initially shoes are divided into three parts: toe, heel and bootleg. First of all, we knit a sock, starting from the edge of the tied sole. Each new row clings to the previously prepared edge. Here it is very important at the beginning of the work to add the right number of loops so that the foot is free to hang in shoes.

Having tied up half of the sole, we proceed to work on its back. Here the direction of knitting changes. Each new row does not cling to the base, because we started to knit from it, but to the front, as if connecting them together. It is important not to forget to leave an armhole through which the foot will be inserted into the shoes.

And the last stage is knitting in a circle, as in indoor boots, until the shafts reach the desired height.

Motif Boots

For some models, the description of crocheted knitted boots suggests that this shoe can be made from individual motifs. It is squares that are best suited for these purposes, since it is easy to fold the finished product from them.

The motive for such boots is better not to take so large that it is easier to collect them all together. The following square is ideal for these purposes. We start knitting with a ring of 5 air loops. On their basis, 15 double crochet columns and one lifting chain of 3 high / low are made.

In the next row, the same number of double crochet posts are made, but there should be an intermediate air loop between them. Then 1 more row of double crochets is knitted. In the next row, there is a transition from round to square. The diagram understands all the stages of work. The oblique cross denotes crossed double crochet, the second of which is knitted behind the first.

For one boot you need to knit about 13 squares. Their specific number depends on the size of the shoes and the motive itself.

Collecting motives

It is not enough just to make the right amount of square motifs. We must also put together knitted boots. A photo of the finished product gives an approximate idea of \u200b\u200bhow this is done.

First, 12 motifs are sewn into a single fabric. It turns out 3 squares in height and 4 in width. Then they are sewn together in a continuous tube, but the two lower motives remain free. This is exactly where the 13th square is inserted.

This is done quite simply. We put the unfinished canvas on the surface, push the squares apart and insert a free motive between them. When it will be sewn on one side, we rotate it by 45 degrees and sew not the opposite side, but adjacent to the one that was sewn earlier.

If you look, it turns out that we inserted the last motive into the boot at an angle. Thus, the sock turned out. Now it remains only to sew the finished product to the sole.

Do not forget to decorate

Any shoes should be not only practical, but also beautiful. This is confirmed by many photos of crocheted knitted boots. It is imperative to pay particular attention to their decor. But this issue should be approached carefully.

The thing is that the number and brightness of decorative elements depend on the selected pattern. If a lot of openwork elements are used, then heavy decor can "steal" a positive effect. In this case, it is better to prefer a light bow made of organza, which will only add airiness to the product.

If the pattern is practically absent, then you can experiment a little. In the example of street boots with a single crochet, the author added a maximum of colors. From this boring pattern is almost invisible, but bright juicy stripes are striking.

To the autumn boots of this type, you can add lush pompons. They will not only decorate the shoes, but also help to control the width of the shaft if you skip them around the circumference of the boot.

Combined boots

We looked at how to make crocheted boots from individual motifs and a solid product from the sole. The last option remained - combined. In this model, the lower part is made of individual motifs. This helps to better make room for the foot. But the stocking itself is knitted with another openwork pattern, after the lower part is sewn to the sole.

This approach provides a more accurate fit of the product to the size of the legs, since the stocking boot should sit perfectly. As a pattern, you can choose any openwork scheme. Therefore, it makes no sense to describe this particular model. Moreover, the scheme here is designed for a high level of skill, which may prevent novice craftswomen from properly adjusting the stocking to the desired size. To prevent the bootleg from slipping during socks, you can knit an elastic band at the top or sew a silicone ribbon on.

Proper care

Any shoes require a careful attitude. This is very important because it is constantly in contact with contaminants: dust, grass, tar, berry juices. Knitted boots are especially sensitive to this. That is why they need to be properly looked after.

Wash them only in slightly warm soapy water, try to twist less and dry on the surface, and not in limbo.

And best of all - wear these boots as an exclusive addition to the festive outfit to feel like a real queen at any celebration.

Nowadays, boots are an integral part of women's wardrobe. For winter colds, there are warm skin models, with fur and embossed soles. Autumn models save women's legs from getting wet, well, and summer boots become just a beautiful and stylish accessory.

When did the boots appear? According to archaeological data, the appearance of shoes dates from about 25-30 thousand years ago in North America. There are also few samples discovered later in ancient Egypt, in Africa.

In those days, shoes were highly dependent on climatic conditions. In hot countries, Greeks, Romans and Egyptians of antiquity wore mostly sandals, while the northern peoples preferred warm leather shoes and boots.

Scythians preferred soft, narrow and high leather boots, which tucked their pants. They resembled a stocking and were attached to the leg with special straps. Such products were decorated with embroidery and fur. At that time, both women and men wore boots, while female models were with short shafts and made of red leather. This color was considered the most beautiful. Often they were embroidered with ornamental patterns.

In Europe, boots were first mentioned in the 15th century. They served primarily as men's riding shoes. These were very long models above the hips. In the time of the French king Louis XIV, over the knee boots were very popular, having square socks, high heels and spurs. In the middle of the XVIII century, bright and pointed models became fashionable. By the 19th century, it was gradually giving way to the popularity of low shoes trimmed with fur.

Like many other things, boots at the very beginning were an indicator of the social level and level of human wealth. For example, in Russia, only the upper classes flaunted in morocco boots, while ordinary people had bast shoes and pistons on their feet. During the reign of Peter I, the popularity of boots became much less, but by the end of the XIX - beginning of the XX centuries, almost all men in Russia wore boots. In the female version, there was a shortened shaft and a hem with red morocco or cloth. The twentieth century was also marked by the creation of an asymmetric insole, which repeated the shape of the foot, before that the shoes were not divided into right and left boots.

Now you can find a model for every taste, from a wide variety of materials, with heels, wedges or even soles. Like any accessory that affects the whole image, handmade boots will always be out of competition. One of the varieties of such products will be crocheted boots.

In this article, we will offer several options for crocheted boots. They all will have one thing in common - a ready-made sole. And then options are possible.

The first one is to give a second life to old shoes. It is quite possible that you have a pair of shoes, boots or even ballet shoes, the top of which is damaged. It may have been dirty, torn, or just worn out, but this pair has a very comfortable shoe. Then your new boots under no circumstances will rub your legs and become a great new, beautiful accessory in your wardrobe.

The second option is a new sole. There is also scope for creative activity and imagination of needlewomen. For example, you can make a knitted part, and then take the boots to the shoe workshop and entrust the sole to the specialist. Another option is to buy comfortable slippers, possibly even home slippers, and turn them into beautiful boots. Usually such shoes have a comfortable, soft and very often rubberized sole. Boots on such a basis will withstand weather conditions.

The next step is to select the threads. Everything will depend on what season you will be knitting boots for. If you want to make thick boots for autumn or spring, use yarn made from a mixture of wool and acrylic. There should be more of the latter, it is due to the artificial acrylic component that the product will be short-sighted, pleasant to wear and durable. For summer models, choose cotton or blended threads with the addition of the same acrylic, viscose. Light and breathable, these strings are perfect for warm weather, and the legs will be comfortable in them.

Crochet boots

Option 1

You will need:

Yarn 80% acrylic, 20% wool (black and yellow in this master class, but you can, of course, choose other colors) 135 m / 50 g;
Yarn “grass” yellow;
Hook number 3;
Slippers with a comfortable sole without a back;
Awl.

We will knit a thread in two additions. The fabric part of the nose of the slipper must be cut off, leaving the very tip. We don’t throw it away, later it will come in handy.

Now you need to make holes with an awl at an equal distance around the perimeter of the slipper. We pierce with an awl from the side in such a way as to capture part of the rubberized sole and insole. Now you need to make stitches with black yarn, as in the photo. We fix the thread, but do not tear it off.

We knit 1 row with connecting posts. The number of loops in each stitch will depend on the width of the stitch and the thickness of the yarn.

The next row we knit art. with / n threads of yellow color.

To do this, you need a cloth part, which was cut off earlier. On paper, you need to make a spout pattern using the dimensions of the cut part.

According to them, we perform the calculation of the loops and knit the nose of art. s / n

Advice! Record all your actions and performed calculations. This will help when knitting the second boot.

Now you need to sew or tie the ss spout to the harness. Try on the product, you may need to adjust the number of loops.

The next step is knitting the heel. We carry out Art. s / n To the sides of the nozzle we attach using s.s. It will take about 2-3 rows.

In the diagram below, we knit the bootleg.

The first p. 3 vp 1 c.p., 3 tbsp. s / n in the same loop of the base, * 1 vp, 3 loops to skip, 1 tbsp. b / n, 1 vp, 3 loops to skip, knit in the 4th (3 tbsp s / n, 1 vp, 3 tbsp s / n) *, continue from *, end the row 2 tbsp . s / n in the first loop and 2 s.p.

The second r. 1 VP, * 3 VP, now we knit 3 tbsp. s / n with a common base and apex in Art. non-cash first row, again 3 c.p., 1 tbsp. non-cash in 1 vp between the triples of art. s / n from one base *. Continue from *, finish 1 s.p.

We knit all subsequent odd rows as the first, even ones as the second. The pattern will go staggered, shifting every two rows.

The length of the shaft is individual. We knit the last two rows of the pattern with a contrasting thread.

Then we bind in two rows of Art. s / n yarn of the second color. Now we need to complete the weaving “grass”. For her, you can take the hook of a larger number.

Now we knit the strap for decor with a yellow thread. The first row of Art. non-cash second row of Art. s / n and the third row of Art. non-cash the length will depend on the girth of the ankle. Now you need to connect the chain vp black yarn of the same length as the strap, and insert it between Art. s / n

Sew on the strap. On the outside, decorate with a button. It remains to tie a pair of boots.

Option 2

For those who prefer sophisticated and elegant simplicity, we offer the following options.

The principle of attachment to the sole and knitting is the same. You can use various colors as a decor by tying the tops of the boots in stripes or decorate with flowers.

Option 3

Crochet boots with scale pattern

This knitting option is also called "crocodile skin." Not a single animal will suffer, and you will become the owner of boots made of "crocodile skin".

In this model, it will be necessary to attach the sole after knitting, since the insole here is also done with a hook. Of course, you can take a ready-made sole and perform the manipulations described above for its binding. Then knit according to the spout pattern suggested below. Try it, experiment.

We start knitting from the sole. The work will take place in a circle (or rather an oval, but the principle is the same). In order to calculate the number of air loops in the set row, it is necessary to measure the length of the foot and its width. Now subtract the second from the first value. The resulting digit * will be the length of the initial chain. We knit a sample of 10 x 10 cm and calculate the number of stitches * in one centimeter. We multiply two numbers ω * and get the number of loops in the set row.

So, the chain of VP typed.

The first p. 3 vp and another 5 tbsp. s / n in the same base loop. Now we knit art. s / n in the last chain we knit 6 tbsp. s / n and go to knitting on the second side of the typesetting row. Finish 1 s.p. in the 3rd cp

The second r. 3 vp + 1 tbsp. s / n in the same loop, in the next five stitches we knit 2 tbsp. s / n with a common basis, then 1 tbsp. s / n In 6 tbsp. s / n knitted from a common base we knit 2 tbsp. s / n on the second side of the oval we continue to knit st. s / n Finish 1 s.p. in the 3rd cp

The third p. We already have a small oval. The narrow sides consist of twos. s / n, knitted from one base, 12 loops from each edge. In these loops we knit 2 tbsp. s / n with a common base, alternating with 1 tbsp. s / n It turns out 18 loops. Next, we knit 1 tbsp. s / n on the lateral wide sides.

In the fourth row at the edges on 18 loops we knit 2 tbsp. s / n with a common base, alternating with 2 tbsp. s / n It turns out 24 loops. We knit wide sides, as usual, without increases.

The sole size is determined individually. You can draw a picture of the foot and periodically try on the work.

When the sole is finished, we continue to knit a sock and a heel without tearing off the thread. Thanks to the pattern of elastic bands made of embossed columns, the finished boot will sit tightly on the leg.

Below is an example knitting pattern. The pattern will be saved, only the number of stitches in the rows changes.

We knit one (first) row with simple art. s / n without increases.

The second r. we knit in a circle with relief purl (concave) st. s / n Please note that in the diagram wider rows are the heel and the nose.

The third p. We knit alternating convex and concave columns. It turns out 1 x 1 gum. Follow the diagram. Try on a boot periodically to adjust the number of stitches.

To go to knitting the shaft, you need to knit 1-2 rows of simple art. s / n

We begin to knit the top with a “scale” pattern. Work is carried out in a circle. Below is a diagram.

The first p. 3 vp + 1 tbsp. s / n in the same loop, * 2 vp, 2 loops to skip, 2 tbsp. s / n with a common base *, continue from *.

The second r. we knit in the opposite direction, using the body of two double crochets as a basis. 3 c.p., 4 tbsp. s / n (we introduce a hook between two tbsp. s / n. and the right column serves as the basis) + 1 vp + 5 tbsp. s / n (we introduce a hook between two tbsp. s / n, and the left column serves as the basis). Knit for convenience, turn upside down. Every first 2 tbsp. s / n with a common base serve as an arch for (5 tbsp s / n + 1 vp + 5 tbsp s / n). Every second 2 tbsp. s / n with a common base we do not knit, when switching between scales we perform 1 vp

The third p. Turn the knitting back. We knit similarly to the first row. Fourth p. we knit "scales" in a checkerboard pattern relative to the second row.

The height of the shaft will depend only on your desire. The last row to fulfill Art. non-cash

As an additional decor, you can sew on the outer edge of the buttons.

Option 4

Crochet boots with funny pompons

We also carry out this model with a knitted sole.

You will need:

Thin and thick acrylic yarn;
Hooks No. 4,5 and No. 5.

The sole is knitted similarly to the previous model. You can choose any other oval scheme on the Internet.

We knit the last row without art. non-cash

We knit the upper part not from the bottom up, but along one long and narrow cloth. With hook number 5, we collect a chain of 17 vp thread in two additions (thick + thin). We knit in return rows crochet No. 4,5 half s / n for the back half-loop. When the length of the fabric reaches the length of the circumference of the leg (this is approximately 30 rows), we finish knitting. We connect the resulting tape into a ring. We fix the thread, cut it and hide it.

The bootleg will be knitted from the upper part of the boot, fixing the loops of the first row in the side bunches. s / n, they act as a typeset. We knit in return rows.

The first p. we knit, alternating 2 tbsp. s / n in 1 lateral polust. s / n and 1 tbsp. s / n in 1 lateral polust. s / n

The second, third and fourth rows are executed in relief st. s / n

Starting from the fifth row, we perform the narrowing of the leg. To do this, select 4 symmetric loops at an equal distance from each other. We knit this row of art. s / n, in the marked loop we perform 2 tbsp. s / n with a common peak. Knit for the back wall.

From the 6th to the 9th rows we knit with relief st. s / n

10th p. We knit in the same way as the 5th, reducing four loops at an equal distance.

The 11th and 12th rows are executed in relief st. s / n

We begin to knit the boot boot.

The beginning of the 13th row is the central point of the future heel. We select the opposite central point of the future nose. Also note the loop before and after it. Now we knit art. b / n to the loop in front of the middle loop of the nose. Here we knit 10 vp and knit in them 3 VPP and further a number of Art. s / n

We got a branch for the nose.

We fix this strip of art. s / n on the bootleg in the eyelet located after the third marked. We knit further non-cash Finish 1 s.p.

The following rows will be performed in a circle of Art. s / n

14th p. In 3 C.P. we knit branches for a nose 5 tbsp. s / n finish the row 1 s.s in the 3rd cp

15th p. performed similarly to the 14th, in 5 tbsp. s / n knitted in an arch of 3 vp nose, we knit 2 tbsp. s / n with a common basis. Now the width of the nose is already 10 loops.

16 and 17 rows we knit without increments of Art. s / n

We turn the work and knit the 18th row of the half-bun. s / n we fix the thread.

Now you need to connect the parts using 1 row s.s. The line will be embossed.

The seam of the connection of the upper part of the boot (it is located across the rest of the knitting) is located at the back. It is necessary to tie a chain of vp with a thread in two additions about 1 meter long. Mark its center and fix on this seam.

Attach 1 pompom to each end.

How to make pompons

To create pompons, you need two cardboard circles. They need to cut out the central round part and a small piece in size along the radius.

Fold the circles so that all the cut parts match. Now we begin to wind the thread without taking off from the ball. The larger and denser the winding, the more fluffy and magnificent the pompom will turn out. When you find the number of turns sufficient, you need to cut the wound threads along the circle with scissors. Now you need to slightly separate one cardboard from another, put a piece of thread into the hole formed. Now we tie it around a bundle of threads, align the cut ends and remove the cardboard. Shake and get a nice pompom.

We attach them to the ends of the chains and tie them nicely by making several turns around the leg.

Warm and comfortable, with and without soles, openwork and thick ... Knitted boots can be different. They are crocheted and knitted, according to simple patterns and complex, for children and adults. Consider how to knit boots with knitting needles with a description and photo.

Slippers

The easiest way to make boots on the sole. The boot fits on the sole of felt. Consider how to tie boots for adults on the size 35-36.

For a larger size, you need to dial the same number of loops, but knit not 26 rows, but add 2 rows per size.

On the knitting needles, dial 36 stitches, distributing them in 9 pieces. on each spoke. Knit with a garter stitch 10 rows.

On one spoke, dial a loop from each end, you get 11 loops. In the same way, knit 26 rows only on this spoke.

Dial 13 stitches on each side. On the needles should work: 10 pcs. sock, 9 pcs. heel, 22 pcs. On the sides.

Knit with a garter stitch 12 rows in a circle.

To connect a foot with a front smooth surface. To do this, at the end of each row, knit together the front - the first loop of the upper part and the last loop of the row. In the felt sole, make holes with an awl and attach the tied boot to it.

In the master class, the simplest knitting is considered, perfectly suitable for beginners. More experienced needlewomen can knit not with a garter stitch, but with more complex patterns. Knitting pattern for knitting boots:

For babies

Very often, knit boots for children. The sole can be left connected or add to it the basis of felt. To do this, cut out the insoles from the baby’s leg, crochet a strong thread with a crochet, sew or crochet a knitted boot to the sole. If desired, between the knitted and felt layers, you can add a layer of syntepon. This will make the sole of the boots even warmer and softer.

To knit the sole, dial 7 loops and knit with a garter stitch. In each even row add 1 yarn immediately after the hem. After 6 rows you should get 13 stitches on the needles. Crochet 26 rows of the same viscous. Then add 1 double crochet after the hem and before the last loop. Knit 46 rows of garter stitch on the resulting 15 loops. Then knit in descending order. To do this, in each odd row, after the first and before the last loop, knit 2 loops together. When 7 stitches remain on the spoke, close the row.

Assemble the sole from knitted and felt parts, adding a synthetic winterizer, if necessary.

To put on the knitting needles loops from the sole: 10, 18, 18, 14 pcs. Knit also garter stitch.

In the 20th row in the front part, knit 2 loops together 10 times: knit the first knitting needle as usual, 15 loops also on the second, and from the 16th knit 2 loops together, knit the loops on the 3rd knitting needle and 3 loops from the fourth knitting needle. The remaining stitches of this row are knitted as usual.

Knit 3 rows of garter stitch. In the 24th row: knit the first knitting needle without changes, on the second knit 11 stitches with the front, 9 times 2 loops together, knit the row as usual.

Then you can knit with any pattern you like. The main thing is that the boots do not fall from the legs of the child, but at the same time are easily removed. For example, any gum, puffs, braids will do. After tying the desired height, close the hinges by tying it with a bend or hook. Ready-made boots can be decorated with knitted flowers, pompons, bows.

Photo of children's boots:

Rubber sole

Such shoes can be worn not only at home, but also in dry weather on the street.

The rubber sole from old shoes is taken as the basis. Rubber is best used because it is easy to pierce with an awl.

You can knit only with knitting needles, only with a crochet or knitting and crocheting together. In the latter case, the hook not only attaches the sole to the boot, but also knits the entire bottom of the boot. So it turns out more dense, holds its shape better. And from above, the lower leg is knitted with any desired pattern. To get denser boots, you can knit them not in one, but in two threads.

You can also not cut the sole, but take home fabric slippers on a rubber sole and tie them on top. To do this, sew the fabric part of the slipper along the sole with a gypsy needle. You should get a line with 0.5 cm stitches and 0.3 cm between them. Next, use a hook to knit a chain of stitches through these stitches. Having knitted a row, begin to knit a sock, tying it with columns without a crochet. In the first row there can be 8-12 columns.

Knit rows with the addition of columns until you get 35-42 loops. Do not add more loops. For sock, it is enough to knit 34-42 rows. Then tie the heel and the sides. To do this, on the first row air loops, start knitting the single crochet, capturing 1 loop of the toe. When the toe connects to the rest of the boot, start knitting the climb in a circle. 5-7 rows, going to the shin. Knit the lower leg with a crochet or knitting pattern.