The sequence of application of gel polish. Applying gel polish on nails - materials and step by step instructions. Benefits of gel polish

Gel polish is one of the innovative and best developments in the cosmetic industry. He appeared relatively recently, but managed to gain popularity among the fair sex. Now the product occupies a high place among the products intended for nail care. In the Russian Federation, many manufacturers offer people their own unique developments. Kodi gel polish is the most popular and well-known material for shaping perfect nails, all salons offer gel nail polish services for girls. Check out the photos and see for yourself!

Advantages of gel polish application technology

The correct sequence of applying gel polish at home will bring the fair sex neat and beautiful nails for a long time. The main benefits: ease and speed of coating, the color is retained for a long time. There are no chemical compounds in the composition of the product, therefore the nail plate is preserved in its original form.

The correct sequence of applying Cody gel polish will help the fair sex to achieve perfect nails for a long time. Nails look neat, shine is preserved, and cracks and chips do not appear.

It happens that the gel polish begins to crack the very next day. Such problems can be avoided very simply, you only need to follow a certain sequence of applying gel polish to your nails and not make typical mistakes.

Preparing nails before applying gel polish

Before coating the nails will need to be prepared. This can also be done at home. After you need to align them and clean your fingers from dust. Are your nails peeling and you don't know what to do about it? Then gently file to the desired level with a finely abrasive nail file. When processing the nail plates, it is forbidden to put the nail file across, the movements must be carried out in the nail plane.

Before applying gel polish, it is allowed to perform a manicure at home. You can use creams, oils, nails will need to be cleaned and dried. Use a primer if necessary. So that the varnish does not leave, you will need to remove the cuticle from the nail, so it is advisable to do a manicure at least at home.

Removing the keratin layer

Did you fix your nails? Then remove a thin layer of keratin from the nails. Use a coarse-grained buff for these purposes. You will need to remove the gloss and make the surface of the nails matte. Do not press hard, so as not to spoil the nails and not to remove too thick a layer. Excessive diligence in work can cause unpleasant consequences: the nails will gradually thin out, lose their elasticity and beautiful appearance.

Remove dirt and moisture from nails. This is required for good adhesion. If necessary, watch a video on this topic.

Cover nails with base gel

The correct procedure for applying gel polish includes a base coat. Primer should be used first for better adhesion. It is required for thin and weak nails.

Now you can start applying the foundation. Why is it needed? It protects the nails from coloring components, which can adversely affect health, and is responsible for the strength of the varnish.

A small nuance in the correct sequence of coating

The application must be done carefully, the layer must be thin. The first coat is no exception to the rule. The correct sequence for applying Cody gel polish: take a brush and with smooth movements walk from the end of the nail all the way to the cuticle. Carefully varnish your nails, dry for sixty seconds in a UV lamp. If you have an LED lamp, then ten seconds is enough.

Starting to apply colored gel polish

It is allowed to apply varnish in a single or in several layers, and the shade will be saturated. Do not forget the sequence of application - a thin layer is required! Covering the nails with a thick layer will cause blisters. It happens that during the first staining, the layer is uneven. It is better to apply three thin layers than one thick one.

Cure each layer of Kodi varnish in a UV lamp for two minutes or in an LED device for thirty seconds.

The final stage - cover the nails with a top

The correct sequence requires fixing the coating with a finishing varnish. It will give your nails a radiant sheen. It is applied somewhat thicker than a base or bright varnish. Dry your nails in ultraviolet lamp a couple of minutes or thirty seconds in an LED device. Now delete sticky layer clinser.

The above sequence will allow you to get rid of a huge number of problems with nails, the main thing is to use high-quality materials and sterile tools in your work, always read the attached instructions.

The sequence of applying Kodi varnish must be performed in a certain order and not otherwise. Yes, a manicure is optional, but it will make your nails look neater and prettier. You can look at the photo and make sure that gel polish is beautiful, fashionable and stylish.

Most often, such a procedure can be done in beauty salons, or at home with a specialist. We will show you how to apply gel polish at home.

Currently, gel polish is very popular and when performing a manicure, the choice falls on it. This is due to the fact that the coating can stay on the nails for a long time, up to 2 weeks, and it also makes nail plate noticeably stronger. Most often, such a procedure can be done in beauty salons, or at the home of a specialist, but today on the website we will show you how to apply the coating yourself at home. Our tips will help you understand the technology of using gel polishes for beginners.

Required Tools

The fact that manicures are most often performed by specialists is largely due to the fact that you need to have special tools to cover your nails with gel polish. But if you stock up on them for your own use, you can provide yourself with a beautiful manicure for a long time.

Must have:

LED lamp or UV lamp- it is a mandatory attribute, since it is with the help of it that the gel polish solidifies. It affects the varnish with special ultraviolet radiation and is completely safe for health.
Base- an indispensable tool that provides protection to the surface of the nails and better adhesion of colored varnish.
Top- Applied at the end, it provides a strengthening of the coating and prolongs the duration. The top is glossy and matte.
Themselves gel polishes of various colors, according to your taste and color.
Degreaser- a special tool that allows you to clean and degrease the surface of the plate, thereby ensuring its stronger adhesion to the varnish.
Nail treatment tools: files, buffs, tweezers, tweezers, pusher, lint-free wipes (it is better to avoid using cotton pads, as they leave debris on the coating).
Decor: sequins, nail stickers, rhinestones.
For beginners, especially for self-use, for the first time it is better not to take very expensive products. It is better to buy at an average price and in small quantities, and next time choose based on experience.

Step-by-step application instructions

In order to perform a high-quality manicure and not forget anything, you need to properly prepare your workplace. First of all, free up enough space on the table, provide it with lighting and put everything in front of you. necessary tools so that you don't have to look for them in the process.

Before applying gel polish directly, you need to prepare your nails well:

The remnants of the previous manicure are carefully removed, removing even the smallest points.
Next you need to do regular manicure, trim the burrs, remove the cuticle, correct the shape of the nail and file the edge from bumps.
With a buff, you need to walk over the entire surface of the nail plate.
Nails are degreased special tool.

After the preparation stage, you can proceed to cover the nails:

Video: step-by-step instructions from the manicure master

Removing the coating from the nail plate

When the nails have grown enough and the manicure does not look aesthetically pleasing, the coating must be removed from the nails. In order to properly remove it, it is not enough just to rub the nails with a cotton pad dipped in a special liquid. This is done in a slightly different way:

With a nail file, you can walk along the upper glossy layer, sawing off a shiny surface, especially for the butt.
Cotton pads need to be cut into 4 parts, apply a remover to each.
Wetted pieces of discs are superimposed on each nail, and are well fixed on top with foil.
After 10 - 15 minutes, the foil can be removed from the fingers, the varnish should swell on its own and peel off the nail. If a small amount remains, then it can be carefully removed with a wooden stick (pusher). Do not use metal tools for these purposes, otherwise the nail plate itself may be damaged.

If during removal the gel polish had time to harden in the air, then you need to repeat the procedure.

In order for the manicure to last as long as possible on the nails and look beautiful, you need to follow a few tips that will help you avoid mistakes:

before work, it is better not to do nail baths, less than two hours before manicure;
if there is not enough experience, then you should not work with all the nails at once, it is better to paint 1-2 nails in turn;
during the day it is better to avoid strong contact with water, especially when washing floors, visiting the pool;
do not apply a thick layer, remove excess product on the brush.

Manicure Ideas

When working, you can also give free rein to your imagination and make various patterns on your nails.

A few of the most simple ideas nail designs that you can do yourself at home:

Using Multiple Colors- now it has become fashionable when the nails are painted in different shades, when only one or even a combination of colors on one finger stands out. In addition, you can use a thin brush and use it to draw on the nails.
Decoration with rhinestones or stones- a monochromatic or colored manicure can be decorated with various pebbles, in the same way, highlighting only one nail, or used on each finger. Jewelry must be applied to the last, still sticky layer of gel polish, you can use special glue, and then dry it in a lamp. And after that, fix with a layer of top.
Loose sequins- with such a shiny powder you can decorate the entire surface of the nail, or apply a drawing with a thin brush until the varnish is dry, pour sparkles on it that will stick to it. And then fix the whole drawing with a top.
Various pictures or shiny ribbons- the principle is the same, you need to place the sticker you like on the sticky top layer, and then apply the top and fasten it under the lamp.

Video “Apply gel polish yourself”

Have you tried gel manicure yet? Be sure to share your experiences and ideas in the comments!

Everything in a person should be perfect: the soul, thoughts, and even nails. A well-made manicure with a perfect coating serves as an adornment for every girl.

But what if nature cheated beautiful shape nails, because of their fragility, it is difficult to grow at least a small length, but you don’t want to do extensions? Gel nails without extensions will come to the rescue.

It will help to grow the desired length and, if necessary, slightly adjust the shape of the natural nail. Very often, girls confuse gel nail strengthening with helium extensions. However, in fact, they have only one similarity: both procedures help to make the nails beautiful and well-groomed.

The differences between them are significant:

for nail extensions there is an elongation of the nail bed and a change in the shape of the natural nail is possible, while with conventional strengthening it is impossible to increase the length of the nail;
gel nails without extension, a small amount of material is applied to the natural nail, which means that there is no thinning and weakening of one's own nails;
gel nail strengthening improves the condition of the nail, reduces its fragility and prevents the plate from delamination.

Strengthening gel nails is a great option for those who do not want to resort to extensions, but want to have long and beautiful nails.

Advantages and disadvantages of gel nails

The advantages of helium strengthening of nails include:

Despite all the advantages, this procedure has enough disadvantages:

The need for regular correction. When the nail grows, the border between the natural nail and the reinforced gel becomes noticeable. The frequency of correction depends on the speed of nail growth, on average it is 1 time in 2-3 weeks.
Duration of the procedure. When covering nails with gel in the salon at the manicure master, the procedure takes from 1 to 1.5 hours, with self-strengthening, the duration increases by at least 2 or more times.

What is better to use gel or biogel to strengthen nails

To determine what is best suited for strengthening nails, first you need to figure out how these two materials differ. The gel is a synthetic glass-like polymer that hardens when polymerized in a UV lamp.

Biogel –it is a rubber based polymer, which is a very elastic material.

Coating type

Advantages

Flaws

Gel nail strengthening

1. Gel nails, even without extensions, are very strong.

2. The gel allows you to build up any length.

3. Duration of wear is about 3 weeks.

4. Overgrown nails can be corrected by correction, without completely removing the old material

1. The use of the gel requires washing down the natural nail before coating.

2. The thickness of the artificial or reinforced nail is much greater than that of the one covered with biogel.

3. Nails lose their elasticity, as a result of which they are prone to chipping and cracking.

4. It is not soaked with special liquids, the removal of the material is carried out by sawing (the exception is gels with the soak-off formula).

Biogel nail coating

1. Nails covered with biogel are much more elastic, bend easily and are less prone to chipping.

2. Positive effect on the natural nail plate.

3. Does not require washing down the natural nail before coating.

4. Easily removed by soaking in a special liquid.

5. Does not require a large layer thickness when applied.

1. Relatively short duration of wear (no more than 2 weeks).

2. The impossibility of correction without removing the old material.

3. It is necessary to prevent contact of nails reinforced with biogel with acetone-containing liquids and alcohols.

Thus, for those who do not want to lengthen the nail plate, but want to strengthen natural nails, biogel will be the ideal material. It will cause the least damage to the nails and give them a beautiful and well-groomed appearance.

Materials and tools needed to strengthen nails with gel

To cover the nails with gel you will need the following materials:

Gels are of several types: single-phase and three-phase. In the case of a single-phase gel, only one gel is needed, in the case of a three-phase gel, a base and top coat are also needed.

Be careful: when carrying out the procedure for coating nails with gel without extension in the salon, it is imperative to check that all the tools that will be used edged manicure have been sterilized because there is a high risk of infection from a non-sterile instrument.

Gel nails without extensions: step by step instructions at home

Covering nails with gel without extensions at home is not so difficult. It is only necessary to follow the correct sequence of all actions and fill your hand a little in order to reduce the time for the procedure.

It is important to know: if the gel does not dry out, the lamps must be replaced. When using led gels, they can be dried in a led lamp, then the polymerization time will be reduced to 30 seconds.

Gel application. The application rules are the same, each layer is dried in a lamp for 2 minutes.
If you need any design, you need to remove the sticky layer from the gel and cover your nails with gel polish or decorate them with decorative elements.
Application top cover.
Removing the sticky layer. When using a top without a sticky layer, this is not necessary.

Gel Nail Design Ideas

One of the most common designs for gel nails is French manicure. This option is universal, it will suit any image and style. In addition, with the growth of a natural nail, the transition will not be noticeable much longer.

It will be interesting to look at a manicure made with plain gel polishes with some design on the nails of the ring fingers.

Recently, a variety of pigments for nails and mirror rubs with which the nails look like they are covered with metal.

The ombre or gradient design does not lose demand, in which the nail is covered with two contrasting or, conversely, similar colors, and the border between them is shaded.

How long does gel nail polish last?

The resistance of the gel coating depends on what material was used for strengthening. If a simple gel, then such a coating will last at least 3 weeks, after which a correction will be needed. However, this is more likely due not to the fact that the coating will deteriorate, but to the fact that overgrown nails look very unaesthetic. When using biogel, the coating lasts about 2 weeks.

Note! In addition to the type used in the coating of the material, the following factors affect the durability of the gel coating:

insufficient quality preparation of the nail plate;
insufficient gel polymerization time in a UV lamp;
contact with chemicals, such as detergents and disinfectants, as well as liquids containing acetone without gloves.

In order for extended or gel-coated nails to retain their original appearance for as long as possible, it is recommended to do all housework with gloves.

Strengthening nails with gel: price in the salon

The cost of covering nails with gel without building up in salons is different, but if you take the average amount, then it will be about 1000 rubles or more. The final amount will depend on the selected coverage, the complexity and quantity of the design, as well as the popularity of a particular salon and manicurist.

It should be remembered that saving on such things is not necessary, since this can lead to the fact that a cheaper master will ruin the nails or introduce any infection by performing a manicure with an untreated instrument.

Useful tips from experts: how to perform high-quality gel nail strengthening

In order to avoid breakouts, a few hours before applying the gel, do not use moisturizers or oils.
To keep the coating as long as possible, manicure should be done dry, without soaking. If you need to steam your hands before a manicure, then it is best to make a coating the next day.
In order for the nail plate to be perfectly flat, you can make additional alignment with a rubber base.
For perfect coverage, it is necessary to remove the pterygium from the surface of the nail as carefully as possible.
Base leaks must not be allowed on the cuticle and side ridges, this will cause the gel to peel off.
Be sure to seal the end of the nail at all stages of applying the material to avoid chipping.

Gel coating allows you to keep the nails in order, giving them an aesthetic appearance. At the same time, their strengthening can be done not only in the salon, but also at home, having previously stocked up with all the necessary materials.

Gel nails without extensions: useful video

Gel nails at home without extensions in this video:

White jacket at home. Gel nails without extensions in this video:

In the process of learning to apply gel polish, certain mistakes are inevitably made that upset novice masters. Let's take a closer look at them so that your home experiments and creativity bring only positive results and impressions!

Preparing nails for a manicure with gel polish: what you need to pay attention to. Top 10 Newbie Mistakes.

Careful and high-quality preparation of nails will help the master quickly and correctly apply color coating, as well as to ensure good adhesion of the nail with subsequent layers of applied materials. Unfortunately, errors happen at this stage in the work as experienced craftsmen and first-time buyers. What are the consequences of the shortcomings made in the processing of marigolds and the application of materials for degreasing, cleansing, dehydration and improving adhesion?

Mistake #1: the base for gel polish lay down with sagging.

Cause: you have not completely removed the old coating. It is necessary to carefully cut down or all the layers of the previous design, so that the layer of the new one fits perfectly on the nail and evens out all the grooves and cavities.

Mistake #2: microbubbles and mini-voids are visible in the layer of the polymerized base.

Cause: in the process of unedged manicure, you did not completely remove the cuticle, pterygium and eponychium. During the baking process, microgaps formed between the layer of the nail and the particles of the skin remaining on the nail. When wearing this design, detachments at the cuticle and cracks may form due to water getting under the base layer.

Mistake #3: the color coating peeled off the nail, starting from the base layer.

Cause: this is due to the fact that the master could skip the step of removing the upper keratin layer. Buffy nail, it is important not to damage it. Do not exert significant force when pressing the tool on the nails and observe the correct direction of movement. Correctly buff from the cuticle to the free edge, with light movements.
The same picture is observed if instead of a buff, . He will make the nail instead of rough - smooth, and the coating on the nail simply will not hold.

Mistake #4: under a layer of gel polish, cracks formed in the nail plate, which led to the breaking of the nail.

Cause: the result of cracks and chips of the nail was the thinning of the natural nail due to too intensive grinding. Another extreme - insufficiently good treatment of the nail with a buff - can be peeling of the coating due to peeling keratin scales not completely removed by the master.

Mistake #5: gel polish peels off with a whole plate.

Cause: particles of pterygium remained unnoticed on the nail, and delaminations were not removed on the free edge. With the subsequent regrowth and exfoliation of the pterygium, the gel coating also departs from the keratin of the natural nail. The ongoing delamination of the natural nail in depth (under the gel polish) leads to detachment of the manicure from the side of the butt.

Mistake #6: shellac and gel polish chip off a lot a few days after coating.

Cause: at this phenomenon there can be three reasons at once - the periungual ridges and the surface of the nail are bad; the application step was skipped; you touched the nail after degreasing and before removing the stickiness from . How to solve this problem?

Degrease the nail in stages: disinfect your nails and hands with a spray or foam. Next - remove the fat from the nails, and at the end, treat the nails and side rollers;
Do not skip the application of an acid-free primer. It is advisable to use the product of the same manufacturer as the base for gel polish. Thus, you guarantee maximum adhesion of the base and the natural nail;
Try not to let your fingers touch the treated nails. If such an incident occurs, re-treat the surface with a lint-free puff.

Mistake #7: the coating cracks and breaks off in small pieces.

Cause: you could not sufficiently clean the nail from dust (sawdust), dirt and sebum (poorly treated the surface with a degreaser or used a substitute containing oil instead).

Mistake #8: in natural nails, even without blows, cracks formed up to the flesh.

Cause: nails suffered from overdrying. You or the master may have used improper preparations (alcohol, acetone, thinner) for cleaning and degreasing. Their regular use without subsequent treatment of nails or leads to weakening, deep dehydration and thinning of natural nails.

Mistake #9: when using the base immediately on the dried primer (the quality of both preparations is good and the expiration date has not expired), after a few days your coating is still chipped and peeled off.

Cause: if you have gone through all the other options and excluded, remember: do you remove the remnants of the degreaser from the nail with ordinary cotton pads. You can't do this. The disks leave villi invisible to the eye, which worsen the application of coatings and lead to loss of aesthetics of the manicure. Residual traces of oil or cream that have not been removed are also contraindicated in gel polish (they also need to be thoroughly “washed off” from the nails with a gentle degreaser). Also check the quality of degreasing. If you applied the base, dried it and see bald spots, repeat the application of the base and be sure to seal the end of the nail.

Mistake #10: your client has long, but thin nails, the length of which you mutually decided not to remove.

Cause: gel polish certainly shields nails from external negative influences, but cannot 100% eliminate the risk of cracks and chips. The coating retains elasticity on the nail. And if the nail plate bends and breaks, the same will happen with the nail. Hence the deep cracks of the nail and the shellac itself. The way to fix the problem is to pre-strengthen the nails or correct the length.

The process of creating a design with shellac and gel polish. TOP 10 common mistakes and how to fix them.

If you managed to carry out the process of preparing nails for applying shellac, avoiding all pitfalls, do not lose vigilance! Creating an image and decorating it with a design also has its own subtleties and interesting life hacks.

Mistake #1: you carefully painted your nails with a thin layer, but after drying in the lamp, you found cured streaks.

Cause: when you or the client put your hand into the lamp, you could keep your fingers tilted all the time drying. Capricious or very liquid gel polishes in this case could flow into the side rollers and onto the cuticle. You can solve this problem with gel polish remover, a lint-free wipe, and a bevelled edge. When you paint a nail, paint over the surface, avoiding lateral ridges and cuticles, but do not allow gaps.

Mistake #2: The new gel polish is chipping and cracking, although the design is covered with a heavy top.

Cause: this phenomenon may be due to the use of a top with expired suitability, conflict of coatings (color and top), use of poor quality finish.

Mistake #3: colored shellac deformed after drying, bubbles and voids are visible in the coating. The shelf life of the gel polish is in order, purchased from a reliable seller with a quality guarantee.

Cause: the coating was applied too thickly or did not dry long enough in or . Remember: the main rule of manicure with resistant polymer coatings is the imposition of thin layers, squeezing the brush with excess on the neck of the bottle, following the recommendations of manufacturers on the timing of polymerization of materials.
Another common reason is that you vigorously shook the bottle of gel polish before application, which led to the formation of air bubbles in the thickness of the material. the right way lifting the color pigment from the bottom is rolling the bubble from the gel polishes between the palms.

Mistake #4: your manicure is chipped and cracked, although you know for sure that the gel polish is of high quality and is stored in compliance with all rules and sanitary requirements.

Cause: if the culprit is not shellac, look into your UV or LED lamp. If your machine is brand new, there may be a manufacturing defect. For a device that has been used for a long time, it makes sense to check and replace them if the service life is exceeded.

Mistake #5: when applying layers, you do not smear the free edge of the nail with a brush.

Cause: The secret of longevity of shellac manicure is the tightness of all layers. If you neglect to seal, any of the layers of the applied base, color, top can peel off under the influence of water, housework or careless handling of the manicure.

Mistake #6: you love to create manicures by mixing colors and creating unique shades. However, despite all the tricks, the coating lasts less than 14 days.

Cause: poor wear may differ from mixes of colors from different brands, or the use of a base, top, color, primer and dehydrator from different manufacturers. It is not in vain that brands recommend a “family” approach to the purchase of gel polish manicure materials. The fact is that the formulas of all products for manicure with shellac are designed in such a way that their components complement each other and ensure maximum durability of the design.

Mistake #7: your manicure shows record wearing times, but decor elements quickly chip off, become cloudy or peel off.

Cause: the secret of high-quality fixing of the decor is fixing the second layer of the top, which is often not done by beginners. For, especially large ones, it will be good to smear the gaps between the crystals with the top. And for or it is extremely important to observe the terms of drying in the lamp. A thick layered design should not dry for less than 3 minutes on the final layer of the top. An excellent solution for the master will be such well-proven top coatings as well as. Their thick rich texture is specially designed for extra-strong fixation of decor and reliable protection of manicure.

Mistake #8: you use both brand new finishes and expired and near-expiring materials in the same design.

Cause: it is undesirable to use old gel polishes in manicure. From the time the bottle is opened, the texture of the product changes, shellac can be applied in thick layers. When they dry, air pockets form, leading to inevitable detachments.

Mistake #9: you apply gel polish and shellac on nails with a length of "under zero", and clients soon complain about chips and cracks.

Cause: practicing masters advise not to apply gel polish on nails that are too short. Either increase the minimum length by , or advise the client to come for a manicure as soon as at least a small free edge grows. The fact is that the contact of the edge of the nail with the pillows of the fingers is fraught with the transfer of subcutaneous fat, traces of household chemicals and sweat from them. If the nails themselves do not wear shellac well, such contact with sweat-fat secretions will inevitably lead to detachments.

Mistake #10: your client has little time for design, and you are in a hurry to quickly create finished image, not observing the required number of layers, their drying time and the density of the applied materials.

Cause: an image created in a hurry will not please you with longevity. Nails need to be painted slowly and carefully, lightly coat the ends on each layer. If you are working with a UV lamp, dry the layers for at least two minutes each. For greater durability (especially with problematic nails), the base and color should be applied in two layers each, and with a voluminous and textured decor, re-cover the manicure and top.

How to properly handle gel polish nails immediately after creating a manicure: do's and don'ts.

Like a lacquer design, a manicure with shellac and gel polish requires care, care and attention. A high-quality, creative, complex design can cost a client a considerable amount, depending on the skill level of the nail-master and the place of his work. So how can you enjoy the image in pristine beauty and not end up prematurely with broken nails, a cloudy coating or an image with cracks and peeling?

It is possible and necessary after creating a gel polish image to do:

Regular cuticle massage with liquid or cream or lotion. This is especially true when manicure "under the cuticle." Neat and well-groomed periungual skin will help your hands look beautiful, neat and well-groomed. The slow growth rate of the cuticle and pterygium will also have a good effect on the durability of the design. Contrary to popular belief, care products will not adversely affect the wear of the coating after being completely dried in the lamp.
Do housework in, including cooking with foods that have a strong color pigment (beets, carrots, etc.). If you are wearing light shades shellac coated, then one day you may encounter cloudiness or the fact that the shade is dirty. The situation will be saved by a lint-free cloth and alcohol. Wipe your nails gently and enjoy renewed beauty.

Have you taken off your manicure and are faced with the fact that your square-shaped nails began to curl at the tips? If the problem is permanent and reappears after treatment, you will need to change the shape of the nails. However, never do this while wearing the design. Cutting or filing nails with shellac, you risk damaging your nails and restoring them for a long time.
Even the owners of strong and rapidly growing nails, many practicing masters advise after 3-4 designs to allow the nail plate to recover. Practice for a few weeks, or. Strengthened, moisturized and nourished nails will delight you again with high-quality wearing of shellac design, without peeling and breaking nails.

Along with positive aspects resistant manicure with gel polish, there are several significant prohibitions regarding this coating.

What absolutely can not be done if you decide to dress your hands in gel polish for 2-3 weeks?

Try to limit skin and nail contact without gloves with harsh household chemicals, facials with acids in the composition, as well as with hair dyes and products containing acetone. The components of these products can adversely affect the wear time of a manicure, as well as cause clouding of the gloss or significantly change the color of the coating.
Treat the cover with the utmost care. Do not use gel polish nails as an opener or screwdriver, toothpick or scraper. Remember, nails under shellac retain their elasticity and increased mechanical stress is harmful to them.
Don't sunbathe for too long. The more intense the sun's rays, the greater the risk of fading bright shades of gel polish.
Do not try to adjust the regrown design yourself. This type of coverage, unlike , does not imply point correction. After 2 weeks, it is better to completely update the manicure than to tint and polish the regrown nail space.

How to properly apply gel polish on natural and artificial nails: technology, master classes and video training.

The step-by-step gel polish manicure procedure at home is not too complicated and requires only regular practice. We invite you to get acquainted with our library of training articles and master classes that reveal all the intricacies and details of design with gel polishes: We answer and share secrets.

What is the difference between performing a manicure with shellac on extended nails (on acrylic, gel, tips).

In practice, the processes of creating an image on natural and artificial nails are quite similar. The main thing you DO NOT do with extended nails is:

Do not use primer. High-quality degreasing and cleaning already guarantee strong adhesion of the base and acrylic or gel. Don't forget to buff the nail just a little.
Apply gel polish to artificial nails only once, since you won’t be able to remove the design from them to the base. And you will inevitably have to make a correction.

Create artificial nails as thin as possible so that the subsequently applied gel polish does not create the appearance of excessively thick and unaesthetic nails.
Choose designs in colors that are close to the natural color of natural nails. So visually you can briefly, but delay the day of changing the image.
Apply the coating in thin layers, pressing the brush against the nail. Unlike natural nails, the correction of flaws on artificial nails is fraught with violations of their adhesion to the surface of the native nail. If your experience with extended nails is not enough, it is better to entrust such a manicure to the hands of a professional.

We hope that now the bright, beautiful and alluring world of gel polishes and shellacs has become clearer and closer to you. Stylish and durable manicures for you!

- this is a real manicure trend of our time. After all, such a coating keeps on the nails for 20 days or more, while maintaining brightness and not chipping. And the materials for such a super-resistant coating are quite affordable. But a paradox arises - there are a lot of people who want to work with gel polish, but, unfortunately, not every master adheres to the correct technology. But it is the observance of technology that guarantees the durability of manicure, satisfied customers and, as a result, good earnings!

So, how to apply gel polish correctly and why should you choose this particular coating?

The instruction has been updated and relevant in accordance with the new technologies of 2018!

Why gel polish? Photo-instruction for applying gel polish

Gel polish is a highly durable color coating. It remains on the nail plate for 14-21 days, and does not lose its luster and does not chip off. You can completely keep the gel polish on your nails even after 3 weeks, but the nail will grow back from the cuticle and become sloppy. The coating is not repaired, but re-created. Fortunately, this will only take up to 40 minutes of time.

See how to apply gel polish on a photo - and you will easily figure out how to create a flawless, colorful and long-lasting manicure.

Materials and tools for work

There is nothing super complicated in how to properly apply gel polish on nails if you properly organize your workplace in advance. We will need:

lamp for drying gel polish - can be UV or LED;
orange stick for cuticles;
lint-free wipes;
disinfectant liquid for processing tools and hands;
and dehydrator Nail Frasher;
base ( or 12 ml), top coat ( or );
color coating - Kodi gel polishproviding shine and brightness;
adhesive remover: Cleanser.

The use of gel polishes, primers, finishes and degreasers from Kodi guarantees the strength and aesthetics of a manicure. In addition, when using any shade from a diverse palette of Cody, you do not need to file off the nail plate - this is an atraumatic technology that preserves the health of your nails.

Application technology step by step

So, we have prepared the tools and materials - now we move on to how to apply gel polish on nails. Each stage of technology is important, because perfect result can only be obtained by following all the recommendations:

1. We prepare the nail plate. It can be as a classic manicure, if necessary, or just giving the nail plate correct form. To shape the nail, we use a drop file suitable for working with natural nails. Also be sure to bend the cuticle with an orange stick.

2. We carry out washed down the nail. Attention! The nail does not need to be filed - it only performs surface grinding to ensure better adhesion of the gel polish to the nail.

3. Disinfect the nail plate.

4. The nail plate is degreased and dried. To do this, we use Kodi's Nail Frasher, which acts as a degreaser and dehydrator at the same time. The tool removes dirt and grease, dries the nail plate and disappears very quickly - which means you can continue right there.

5. We cover the nails with an acid-free primer. On the surface of the nail, it turns into a “double-sided tape”. Naturally, you need to apply the primer very carefully so that the base does not “pull up”. The primer covers the entire nail, not reaching the lateral ridges and the cuticle by 0.5-1 mm.

6. We cover the nails with a base - a thin layer, rubbing movements. Be sure to process the ends. We dry the base in a UV lamp for 2 minutes, and in a LED lamp for 30 seconds.

7. Apply a thin layer of color coating, moving from top to bottom. Be sure to paint over the end part of the nail - this will avoid chipping when worn. Dry the first layer in the lamp, then apply the second and dry again.

8. We complete the procedure by applying the finishing layer. Finishing necessarily pass the end of the nail. Dry in a lamp.

9. The dispersion sticky layer is removed with a special tool - Cleanser. The use of special equipment guarantees the durability of the coating. If you ignore this point, the coating can quickly collapse.

10. Apply cuticle oil.

A little about the care of gel polish

Gel polish Cody retains its attractiveness for a long time, not being damaged by water and household chemicals. In the process of wearing such a coating, it is not recommended to cut and file nails, but you can remove the cuticle.