Double braid knitting pattern. Knitting patterns for various volumetric braids with knitting needles. pattern for mittens

Knitting needles - easy and simple. With their help, you can create original things that are suitable only for you. Every woman has knitted outfits in her wardrobe: beautiful sweaters, scarves, warm mittens for the winter. Knitwear is now at the peak of popularity and it is justified. Many different techniques allow you to create creative, fashionable accessories and clothes.

One of the interesting and unusual patterns is a braid with knitting needles. This easy pattern, which even beginner needlewomen can master, has many techniques for performing. In any case, it is easy to learn how to knit it correctly - whether it is a braid of twelve, sixteen or three loops, you knit on straight knitting needles, or circular ones. Volumetric double or triple. These are the ones that will be discussed in this lesson..

A voluminous braid with knitting needles is knitted using the upper loops, or rather, their movement. Several auxiliary lines are knitted with these loops. The number of loops must be divisible by three. The pattern of a voluminous pigtail can consist of eighteen loops, six per element of the braid (there are only three of them). To knit voluminous braids, you will need two straight knitting needles, and one additional size smaller.

Volumetric pattern is knitted with front stitch. To begin with, the first 12 links are knitted, then the last 6 are performed in the amount of three strips. This is done to be able to transfer elements to the left side of knitting. The first and last loops of the rows also need to be knitted. The product will need to be turned over several times in the course of knitting.

When working on a new strip, you should leave the links on the additional knitting needle and knit the last six loops of the volumetric braid. Then all the links are knitted on the third knitting needle.

Now you need to complete 3 stripes without moving them. In the new row, all loops are moved to the right. Six links are transferred to an additional knitting needle, the rest are knitted four rows with turning over. Then loops are knitted from the auxiliary knitting needle. Next, you will need to perform their alternation in right side or left, through every third row. This is how you get a voluminous braid.

We bring to your attention a knitting pattern for a voluminous braid. With the help of it, it will be possible to easily master this technique.

Braid of nine loops with knitting needles

Let's look at the technique of forming a braid step by step. Cast on seventeen stitches. We start knitting from the first row:

We do not knit the edge. We knit three purl, nine facial and four purl.
We turn to the second row: here, too, we simply remove the edge and knit: three facial, nine wrong side, three facial. And we knit the last edge from the inside out. It turns out here is such a preparation.

Let's move on to the third row. We remove the edge, we knit three inside out. Here we will make the first move: we transfer three loops to the auxiliary knitting needle so that they are on the front of the work.
Now we knit three facial ones and transfer the loops from the auxiliary to the left knitting needle. We also knit them with facial ones. Then there are three facial and four purl. First transfer completed.

We knit the fourth and sixth rows in exactly the same way as the first, and the fifth as the second.
In the seventh row we make the second movement. We remove the edge, we knit three purl and three front ones. We remove the next three loops on an additional tool so that they are on the wrong side. We knit three front ones, we return the loops with additional. needles on the left. We knit them with facial ones, and the remaining loops inside out.

We knit the eighth and tenth rows as the first, the ninth as the second.

Now, to get the pattern, you just need to knit further according to the already given pattern. Alternate steps from the third to the tenth row until you get the pattern of the desired size.

You should get such a pigtail.

Pattern braid of 12 loops with knitting needles

This pattern is very popular right now.. It is with the help of it that now fashionable hats with pigtails are knitted. A voluminous braid pattern of 12 loops can decorate items such as cardigans, blankets, sweaters.

Knitting pattern for a braid of 12 loops

Braid of 16 loops knitting pattern

In the diagram, only the front rows are drawn, the wrong ones are knitted according to the pattern.

The rapport of this pattern consists of twenty loops, and fourteen rows.

Symbols for the scheme:

We knit double and triple braids

The double braid is one of the most light patterns . It is very easy to learn and learn to perform. The double braid is so named because it consists of only two plexuses.

This is a very dynamic and mobile ornament, you can change it as you like. For example, increase or decrease the gaps between patterns.

In order to start knitting a double braid according to this pattern, you will need to dial the correct number of loops. There should be three for symmetry, two edging and plus loops for the pattern - their sum should be divisible by 12.

The first and fifth rows are knitted in the same way: three front loops, three wrong ones, the last three are knitted together inside out.

The second row is knit and purl on the other side.

In the third row, a transfer is made with an inclination to the left. Three knit and purl loops are knitted, for extra. the spoke is moved by three more. Then three loops are knitted inside out, and the moved ones are returned and knitted with the face. The seventh row is done in the same way, only with an inclination to the right.

With this detailed diagram with the description, it will be easy for you to figure out how to knit a double braid with knitting needles.

Triple braid, at first glance, it may seem intricate pattern for beginner needlewomen, but this is absolutely not the case. The entire first row is knitted with facial loops. All purl rows are performed in the same way. In the third row, five loops are not knitted, but transferred to an additional knitting needle. The next five are knitted face. Then ten more facial loops follow, and five are again transferred to an additional knitting needle. After that, five facial ones are knitted, and then all the loops that moved.

From the fifth to the eighth, all rows are knit face. Ninth row - five persons. n, five are transferred, five persons transferred are returned and knitted with facial ones. The eleventh row consists entirely of facial loops. Thus, the rapport of a triple braid is knitted.

Volumetric braid with knitting needles - very interesting pattern, it will be useful for many beginner needlewomen to learn how to knit in this way. This pattern has many interpretations for every taste and color. You can knit almost anything you want with this pattern, because there are a lot of volume braid variations. There is, for example, a very beautiful Turkish braid with elongated loops, which will decorate a women's blouse, a children's sleeveless jacket, and a voluminous snood. A thick braided braid can serve as a decorative element for both a warm cardigan and a bag. self made. A convex braid of 15 loops is used when knitting hats and sweaters. Flat braids, which perfectly coexist with an openwork rhombus, are loved by beginner knitters, a herringbone braid is suitable for more experienced ones, because now it can be knitted diagonally and on two sides, symmetrically central to the axis, and this method requires skill. In general, not only diagonal braids can decorate a pattern in a canvas - a braid can be both vertical and transverse. There's even a double-sided braid that looks the same on both the front and back sides of the knit, so it's perfect for knitting scarves. The pattern can consist not only of whole braids - the texture of the canvas can also be created by their individual elements, such as in the Braid pattern. To understand which braid will look more spectacular on your knitting - large and lush, or it is better to choose small braids (weaving largely depends on the thickness and material of the thread), it is better to first knit a sample.

It is quite difficult for many beginner needlewomen to understand the principle of knitting braids, so to make it easier to master this process, you need to remember a few recommendations.

Council number 1. Use special knitting needles for knitting braids and plaits. They have a curved shape and sharp ends. On the curved segment of the spokes, those loops that need to be intercepted are often located. The material from which such knitting needles are made can be very different, but it is best to choose plastic knitting needles, since the thread slides better over their surface.

The sharp tips of the needles help to quickly pry the loops on the main knitting needle. In addition, such knitting needles can be placed either in front of or behind the fabric. At the moment when they need to be knitted, it is enough just to move them to the working knitting needle without returning to the main knitting needle.

Also, a round pin, or a special needle with a tip, is often used as an auxiliary knitting needle.

Experienced needlewomen can do without such special knitting needles, as they knit loops with interceptions with ordinary knitting needles. It will be easier for beginners to master this pattern, having such auxiliary tools.

Council number 2. The width of the auxiliary knitting needle should be less than that of the main one. In order for the pattern on the knitting fabric to be textured and voluminous, the loops for the braids should have a smaller size and a high density.

Council number 3. The size of the pigtail depends not only on the number of loops initially cast on, but also on the thickness of the threads.

The thicker the yarn, the wider the pattern will be. To create a narrow pigtail, thin threads are suitable.

Council number 4. To obtain the required size, you need to add the number of loops per pigtail to the total number for the entire product. It is worth doing in order to know how much knitted product will stretch during wear. The type of yarn also plays an important role.

Council number 5. We follow the direction of the additional knitting needle, which can be both in front of and behind the canvas. It is worth remembering a simple rule, if the auxiliary knitting needle is behind the canvas, then the pigtail will cross to the right side.

If the auxiliary needle is in front of the canvas, then the pigtail will be formed to the left.

What are the differences in knitting purl loops for a braid pattern?

Experienced needlewomen could often notice when they are gaining too much a large number of loops in the canvas with braids, then in the process of switching from front to back loops, the last front loop turns out to be too wide. The same picture is observed in the process of transition from purl to facial loops. This loop seems to be divided into two halves. What is the reason?

Exposing such a small nuance is quite simple, since the size of this loop directly depends on the way the purl loops that surround it are knitted. How to get rid?

So that all the loops are the same size and do not stick out from the overall picture of the pattern, you need to remember that the last purl loop must always be knitted using the classic method. This loop is the very last in the block of purl loops, and after that the front loop does not immediately begin.

In this case, the front loops can be knitted as needed, either in front of the front or behind the back wall of the loop. The first loop, located in the purl block, which comes after the front block, is always knitted with the "grandmother's" method.

From the inside of the fabric, the front loops can be knitted in the usual way, as convenient. It is worth remembering that the last loop covering the front block must be knitted behind the back wall of the loop. But this does not apply to the last loop, which closes the row. In the block of front loops on the inside, the first knit loop should be knitted along the front wall, but this again does not apply to the first loop, which begins the row. Simply put, the knitting of the last and first loops in any row will automatically depend on the technique of knitting the purl of the last and first loops in the previous row.

Learning to knit the simplest double braid

The double braid is considered one of the simplest and most understandable, as it is knitted with only two crossings. Width, distance between patterns and volume can be changed at your discretion, but the principle of knitting remains the same.

Description of work

First you need to dial such a number of loops that would be a multiple of 12, that is, the initial number should be divisible by 12. In addition to the main loops, you need to add 2 edge loops and 3 loops for the symmetry of the canvas. The first two rows are knitted in order to get a clear pattern.

1 and 5 rows should be knitted as follows: * 3 facial loops, 3 purl loops *. Close each of these rows with a triple of purl loops.

All 2,4,6,8,10 and 12 rows of the wrong side must be knitted according to the scheme. All facial are called facial, and purl - purl.

3 row will begin the formation of the braid weave itself on the canvas. Crossing is carried out to the left side. At this stage, you need to make sure that the auxiliary knitting needle lies in front of the canvas at this moment. Scheme of knitting 3 rows: three purl loops, 3 facial loops, remove three loops on an additional knitting needle, continue to knit the rest with purl. The removed loops then need to be returned to knitting, while knitting them with facial ones. Close this row also with 3 purl loops.

The fourth, fifth and sixth rows are knitted according to the pattern.

In the seventh row, another crossing of the loops will begin, but only to the right side. So it needs to start 3 purl loops, remove three loops on an additional knitting needle, 3 front loops, knit loops to knit purl, 3 front loops. Close the seventh row with 3 purl loops.

Subsequent rows are knitted by analogy.

We make a voluminous and embossed pigtail

For this braid, you need to dial as many loops, the number of which would be a multiple of 11. Also, do not forget about 4 edge loops and loops for symmetry.

Odd rows (1,3,7,9) are knitted in the following order: *purl 2, knit 9*. You need to close these rows with two purl loops in order to form the symmetry of the canvas and pattern.

The crossing of the pigtail begins only in the fifth row. To do this, you need to knit 2 purl loops, remove 3 loops on an additional knitting needle. At this point, you need to control the location of an additional knitting needle, it must be left behind the canvas. The next 3 loops are knitted, the loops removed on the auxiliary knitting needle are again knitted with purl, continue 3 front. Close the 5th row with two purl loops.

The 11th row begins the formation of another crossing of the pigtail, so it fits like this: purl 2, knit 3, 3 loops are removed on an auxiliary knitting needle, purl 3, removed loops are knitted. Close the row with two facial loops.

Learning to knit triple (royal) braids with knitting needles

Similar patterns are often used for knitting. men's sweaters, women's pullovers and hats. This version of the braid is suitable for decoration. outerwear, for example, a warm cape or cardigan. This pattern is complicated, so before knitting it is better to paint in detail the knitting of each row separately.

First you need to remember that the number of loops cast on must be a multiple of 30. For the background for this pattern, a smooth surface is taken. You just have to choose the type of loops that will form the background of the canvas.

Description of work

1 row is done with facial loops. 2 row purl rows knit only purl loops. In the 3rd row, the pigtail will begin to cross. Schematic knitting 3 rows: remove 5 loops on an additional knitting needle, which should be placed before work. After moving the loops, the next 5 knit facial. The removed loops are knitted, the next 10 loops are knitted. Remove 5 loops on an additional knitting needle, leave behind the canvas. Knit the next 5, removed loops.

The fifth and seventh rows are performed only with facial loops.

The sequence of loops for the 9th row: knit 5, remove 5 loops on the auxiliary knitting needle (leave behind the work), knit 5, knit 5 removed loops with knit, 5 remove on an additional knitting needle (leave in front of the work), knit 5, knit 5 removed with knit, 5 facial.

11 row knit only facial. Repeat the knitting order as soon as the 13th row begins. Repeat pattern from row 1.

We knit a pigtail-chain

This pattern perfectly decorates both women's and men's knitwear. It is distinguished by the presence of two sides, so knitting for the front and wrong sides will be different.

First row (face): 2 purl, 8 facial, 2 purl.

Second row (wrong side): knit 2, purl 8, knit 2.

Third row (face): purl 2, move 2 loops to the auxiliary knitting needle (leave the fabric behind), knit 2, knit the removed 2 loops (crossing to the right side), move 2 loops to the auxiliary knitting needle (leave the fabric in front), knit 2 , shot 2 facial (crossing to the left side), 2 purl.

Row 4 (wrong side): knit 2, purl 8, knit 2.

Fifth row (face): 2 purl, 8 facial, 2 purl.

Row 6 (wrong side): knit 2, purl 8, knit 2.

Seventh row (face): purl 2, move 2 loops to the auxiliary knitting needle (leave the fabric in front), knit 2, knit the removed 2 loops (crossing to the left side), move 2 loops to the auxiliary knitting needle (leave the fabric behind), knit 2 , removed 2 loops knit facial (crossing to the right side), 2 purl.

Every craftswoman is simply obliged to be able to knit braids. After all, this is very beautiful patterns, they are able to decorate many knitted items. For beginner knitters, some patterns may seem complicated. We advise you to try to knit the braid pattern with the knitting needles of the scheme and the description of which are presented in this article and see for yourself that everything complicated actually starts simple. Follow the diagrams and you'll be fine!

Abbreviations used in descriptions:

pattern repeat - P;
front rows - LR;
purl rows - IR.

"Gertrude"

In this criss-cross pattern, the braids are adorned with lintels. Such a braid looks especially good on voluminous things.

The number of stitches must be a multiple of 24 + 15 stitches + 2 cr. Knit the pattern according to the pattern.

The diagram shows only the LR, in the IR we knit all the stitches according to the figure. LR start with 1 cr., then repeat P the required number of times, finish 15p. to the arrow and 1kr.
Vertical P consists of 1p. for 16 rubles.

"David"

Knitted with diverging and converging braids, a pattern for yarn of medium and more thickness.

The above diagrams show how to knit such a figure in two versions: a braid pattern for forward / reverse and for circular knitting.

For straight / reverse knitting with braids, the number of points should be a multiple of 24 + 2p. + 2kr. We start and end the row - 1 cr.

For circular knitting of a pattern, the number of points is a multiple of 24.

"Robin"

Combined embossed braids and plaits look great not only on clothes, but also on pillows and blankets.

The above diagrams show how to knit such a figure in two versions: for forward / reverse and for circular knitting.

For straight / reverse knitting with braids, the number of points should be a multiple of 12 + 7p. + 2kr. We start and end the row - 1 cr.

For circular knitting of a pattern, the number of stitches is a multiple of 12.

Combined braid pattern

An interesting combination of weaves of different widths gives knitted pattern extra charm.

Knitting is performed according to the scheme, which shows only the LR. For IR, we knit the loops according to the visible pattern.

Horizontal P consists of 12p., Vertical P - with 1p. by 18 rubles

Braid pattern with paths

The presence of vertical tracks from the front loops visually “pulls out” the overall pattern. The combination knitted according to this algorithm is suitable for adult and children's models from medium thickness yarn.

We knit according to the scheme, which shows only the LR. For IR, we knit the loops according to the visible pattern.

Horizontal R consists of 18p., Vertical R - with 1p. for 32 rubles.

Braids with leaf ornament

A charming composition of braids and small leaves looks great on jumpers, cardigans.

Knit the braid pattern with leaves with knitting needles according to the scheme, which shows only LR. IR is performed according to the figure. The green cell of the scheme means the absence of a loop.

The horizontal and vertical P of the pattern are equal to 23p, respectively. and 27r.

curly braid

A curly braid with knitting needles is knitted with simple crosses of 4 loops. How to knit such weaves is described in detail in the instructions under the diagram.

On cx. only LR shown. IR is performed according to the figure.

Horizontal P is equal to 14p. + 2p. + 2kr. Vertically, we do once with 1p. to 18r., then knit, repeating from the 3rd p.

Openwork braid pattern with knitting needles

Such a pigtail looks best from a dense yarn of medium thickness. This is a wonderful pattern for women's summer blouses, tops.

On cx. only LR shown. IR is performed according to the figure. Yarn over in IR, purl. P.

Horizontal P is equal to 16p. + 3p. + 2kr. We start knitting with loops in front of R. Vertical R is equal to 1p. for 26 rubles.

Braids on the wrong side

The intricate weave gives the product knitted with such a pattern elegance and originality.

On cx. only LR is shown. IR is performed according to the figure.

Horizontal P on cx. indicated by arrows, vertical P is equal to 40r.

Pattern “Braid and grid” knitting needles

Detailed diagrams and descriptions explain how to knit this interesting pattern. Contrary to popular belief that braids are a pattern for tight, warm clothes, try knitting summer blouse such braids with a mesh.

The braid chess holds the fabric well, preventing the knitted product from stretching and losing its shape. Braids and mesh are knitted on a count of a multiple of 22 + 1p. + 2kr. On cx. only LR shown. IR is performed according to the figure.

Vertical R - 28r.

Braids “Shell”

Uniform and rustic at first glance patterns with knitting needles often look completely different in finished product. This option is just that. Try to apply it to women's pullover and you will be pleasantly surprised by the result.

How to tie such pigtails - see the diagram. It has LR and IR.

R contains 12p. + 2kr. + 7p. for the symmetry of the figure. In height, repeat from 1r. by 8r.

Wide openwork braid

This knitted a pattern of a wide openwork braid and side narrow braids is perfect for youth models of jumpers.

A detailed knitting pattern for beginners shows LR. How to knit the wrong side - look at the visible pattern. Yarn over in IR, purl sts.

Horizontal (marked in brackets in the diagram) and vertical P, respectively, are 26p. and 20r.

Such braids look good on children's things, small interior items. Braids hold the shape of the canvas, preventing it from stretching.

On cx. shown LR, IR knit according to rice.

Braids with shadow

This pattern is a continuous weave of eyelets. They are all knitted.

On cx. only LR are shown. Wrong side side is knitted out. P.

The horizontal R consists of 15p. For knitting you will need additional. spoke. If desired, the movement of the loops can be crocheted.

thick braids

A beautiful convex braid pattern is suitable for knitting voluminous things on the knitting needles.

Description:

1p. (LR): 6l., * 2i., 10l. * - from * and to * repeat to the extreme 8p., 2i., 6l .;
2r. and all IR: 8l., * 10i., 2l. * - from * and to * repeat to the extreme 6p., 6l .;
3p.: as 1p.;
5p.: 6l., * 2i., remove 5p. for additional cn. at work, 5y., 5y. with add. knitting needles, 2i., 10l. * - from * to * repeat to the extreme 8p., 2i., 6l.;
7r., 9r.: as 1r.;
11r .: as 5r .;
13r., 14r.: as 1r.;
Row 17: 6l., *2i., 10l., 2i., remove 5p. for additional cn. at work, 5y., 5y. with add. knitting needles * - from * to * repeat to the extreme 8p., 2i., 6l .;
from 19 p. for 21r.: as 1r.;
23r.: as 17r.;
24r. (IR): as 2p.

Braid chain

Easy to make and versatile pattern.

The detailed diagram shows the LR. How to knit the wrong side - look at the visible pattern. Yarn over in IR, purl sts.

R is equal to 5p. + 2p. for symmetry + 2cr.

Braids with elongated loops

This very delicate pattern can be used when knitting. women's blouses, jumpers, hats. For beginner knitters, the pattern can seem a little daunting.

Horizontal P is equal to 18p. + 2kr. On cx. LR and IR are shown. LR should be read from right to left, IR - vice versa. We perform once with 1r. 12p., then repeat from 3p. for 12 rubles.

Schematic explanation:

1r.: 1i., 3l., 1l. from 3n., 8l., 1l. from 3n., 3l., 1i.;
2p.: 1l., 3i., 1p. pull out (at the same time drop the yarn over, transplant to the right joint, without knitting, the thread before work), 8i., 1p. pull out (repeated), 3i., 1l .;
3r.: 1i., 2l., 1l. with 3n., cross the elongated section to the left with 4l. (remove the elongated one, knit 4l., then knit the faces outstretched.), cross the elongated one to the right from 4l., 1l. from 3n., 2l., 1i.;
4r. and further: we read similarly according to the scheme.

Small pair of braids

Neat figure for knitting with threads of medium thickness. Ideal for baby items.

Braid knitting patterns are worked out for straight / reverse knitting and for circular knitting. LR and IR are shown.

Horizontal R is 7p. + 3p. for symmetry + 2cr. Vertically repeat from 1p. for 6r.

Braids with elongated transitions

A simple pattern on the wrong side. decorate any thing. Looks good on interior items, such as pillows.

Dial should be 18p. + 3p. symmetry + 2cr. In height, repeat from 1r. for 12 rubles.

miniature pigtails

Very graceful pattern, requiring some patience when performing. It is better to use yarn for it that is not very thick, otherwise the pigtails will look ugly.

The diagram shows LR and IR.

The initial set is 10p. + 2cr. In height, we perform from 1r. for 16 rubles.

Braids - buds

An interesting solution to the classic pattern is suitable for knitting various things for adults.

How to knit the LR is shown in the figure, in the IR we determine according to the figure.

The original set is 19p. + 1p. + 2cr. In height, we perform from 1r. for 14 rubles.

Braids with small openwork

The fabric knitted with this pattern firmly holds its shape and does not stretch. The drawing can be used in various models clothing and when knitting interior items.

The diagram shows LR and IR.

The initial set is 16p. + 8p. + 2cr. In height, repeat from 1r. for 12 rubles.

Beginning craftswomen, when planning to knit a thing, usually choose simpler patterns. And rightly so - having honed your skills on simple patterns, you can proceed to more laborious, but beautiful drawings. From this kind of abundance, one can single out simple “braids” or “plaits”, which, in principle, are one and the same. The only difference is in the knitting technique: braids are one overlap of certain loops, and plaits are a whole system of overlaps, folded into one full-fledged pattern. But since the technique for their implementation is similar, that's why they are combined into one view. Further in the article both subspecies will be considered.

"Scythes"

Knitting with knitting needles “braids” is not difficult, it will just be a little inconvenient to do them at first. To knit them, additional knitting needles or pins will be required - they will need to be removed from the loops before crossing. The movement of the loops in the pattern is to the right and to the left - it depends on the pattern that is knitted on the canvas. In the case of using braids to decorate shelves, a certain symmetry should be observed at the intersection of the loops.

A simple braid

To knit a simple “braid”, you will need to separate 8 loops on the main fabric - the number of loops can be changed, but it should be taken into account that the crossover does not lead to the formation of a hole and the corresponding assembly of the fabric. To knit a sample, you will need to dial 14 loops, 8 of which are the “braid” itself, 4 loops are needed to highlight it and 2 edge pieces. Next, the sample is knitted in the following sequence:
1. First row: hem, 2 purl, 8 facial, 2 purl and hem.
2. 2, 3 and 4 rows knit according to the pattern.
3. Fifth row: hem, 2 purl, 4 pieces to remove on a pin or auxiliary knitting needle, without knitting and holding before work, knit the next 4 loops, transfer the loops from the pin to the left knitting needle and knit, it turned out to cross to the left. Removing the loops on a pin or auxiliary knitting needle, leaving them behind the fabric, leads to the formation of a crossing to the right side. Finish the row with two purl and edge.
4. From the 6th to the 12th row, knit as the knitting looks, and then cross the loops, as in the fifth row.
The considered pattern is suitable for doing any thing. You can make "braids" in a row on the canvas - it will look very beautiful. The same pattern looks good on hats, sweaters, vests, scarves and other things, both for children and adults.

Simple double braid

This pattern consists of two weaves, but making them is not at all difficult. In it, you can change the number of loops in the weaves, the distance between the "braids" and it is possible to carry out "dilution" with other relief patterns. To complete the sample, you need to dial as many loops so that their sum is a multiple of 12, add three loops to them for symmetry and two edge loops. In the example below, cast on 17 stitches.

Knitting must be done in compliance with the following scheme:
1. 1st and 5th rows are knitted in the sequence - hem, 3 front, 3 purl, finish the strip with 3 purl and hem.
2. The second row and all reverses are knitted according to the pattern.
3. In the third row, it is required to cross to the left side, as described below - remove the edge, make three purl, then three facial, remove the following three loops on a pin, and knit the three pieces following them with purl, return the loops from the pin and make their faces. Finish the strip with three purl and edge.
4. In the 7th row, it is required to cross to the right side. Follow the sequence - hem, 3 purl, remove the next 3 pieces on a pin, 3 facial, return the loops from the pin and tie them with a purl, 3 facial, 3 purl and hem.
Starting from the 9th row, repeat the pattern from the beginning of the rapport.
On the basis of "plaits" and "braids" more complex patterns are created, for example, "braid". Gradually gaining experience, any craftswoman can master it. The implementation of complex patterns on products makes them stylish and unique, emphasizes their individuality and beauty.

"Harnesses"

This pattern is a crossing of one or more loops against the background of the main fabric. According to the same principle, “braids” are performed, only in this case the number of loops is taken from 3 to 12. From this row there will also be “arana”, which are interlaced with cord compositions and are similar to weaving baskets, braids and fabrics.
For inexperienced needlewomen, you can master the patterns of knitting "harnesses", starting with the simplest ones.

Harness pattern - vertical stripes

The presented pattern is easy to perform - only 4 loops are used, followed by their crossing. The stripes are embossed, quite expressive, as a result of which they can be used in any product. The pattern is especially good when it is made from thick yarn.
To complete the example on the knitting needles, you need to dial the number of loops that is a multiple of 6 and add 2 loops to them so that the pattern is symmetrical, and two edge loops. For example, it will be 34 pieces. Next, knit in sequence:
1. First row: hem, 2 facial, then comes the rapport - 4 purl, 2 facial - do this to the end, knit the hem purl.
2. Second row: purl 2, then there is a crossing of two loops to the right, for which knit the second loop of the front, stretching it in front of the first, and then tie the first. Cross the next loops to the left: knit the second loop behind the first, and then knit the first. Finish the row with two purl and edge.
3. Third row: repeat the pattern, starting from the first row.
It must be taken into account that the pattern itself is formed in this case on reverse side- follow the placement of the front and back sides when casting on and knitting.

"Barrel Harness"

A simple pattern that does not require diligence, suitable for creating any thing. To complete the pattern shown in the example, you need to dial the number of loops, a multiple of 5, add one for the symmetry of the pattern and 3 edge loops. Let it be 33 pieces, which are knitted in the following sequence:
1. 1, 5, 7, 9 rows knit in sequence - hem, purl, then comes rapport - 4 front, purl, final hem.
2. Even stripes are knitted as knitting looks.
3. Third row: hem, purl and rapport - cross 4 loops to the left, remove the first loop on a pin, holding it before work, then knit 3 front loops and only then one removed from the pin. Finish the purl and hem row.
4. Knit a pattern up to the tenth row, taking into account the instructions presented above, from the 11th, perform the pattern again.
There are a lot of types of braids and plaits - those presented in the article are the simplest. To create knitting patterns with braids and plaits, more details can be found in the video knitting lessons. A video and a selection of schemes for the realization of fantasy are presented later in the article.
Goats and harnesses turn out to be not so difficult to perform, but rather laborious in counting loops and making an overlap - difficult for beginners to do. For skill, it is advisable to use simple braids, but in the future you can take on more complex variations.

Such needlework as knitting arose a very long time ago. To this day, craftswomen are in search of new ideas for creating various patterns. A huge number of things can be created thanks to the ability to knit. Nowadays, every fashionista can be found in the wardrobe knitted clothes ranging from pullovers to mittens. One of the most favorite patterns are various interpretations of braids. They will be discussed in this lesson. Schemes and their description will be offered to you for consideration.

A voluminous braid with knitting needles is formed due to the movement of the upper loops, which are knitted into several auxiliary lines. The number of buttonholes must be a multiple of three. The ornament of a voluminous braid can consist of twenty-one buttonholes, seven pieces for each element of the braid. To knit a voluminous braid, you need to prepare straight knitting needles, as well as one additional, but smaller size.

The volumetric ornament is knitted with front stitch. To move the element to the left side, you need to knit the first twelve links, and then additionally knit the last six pieces in the amount of three strips. Each time you need to rotate your canvas. The first and last loops of the river. are also knitted. In the new strip, leave the links on the additional tool before work and tie the last six pieces of the voluminous braid. After that, knit the links from the third knitting needle.

Next, perform three stripes without moving. In the new river move the buttonholes to the right side. You need to transfer six points of the braid to an auxiliary tool and leave them to work. The remaining links knit four p. with turning. Turn again in faces. R. buttonholes, and then tie links from an additional tool. Then the scheme of work is to perform an alternation of loops with knitting needles to the left or to the right side every 3 p. Thus, you will get a beautiful voluminous braid.

We knit an openwork braid with knitting needles

Openwork braids are knitted using the scheme that will be presented in the article. The number of buttonholes is constantly changing in the course of work. It is necessary to dial links that will be a multiple of ten plus two edges. The figure shows ten stripes, which are knitted as follows:

1r. - the front side starts from the edge, then one purl p. and one person., Throw a thread, 1 purl. p., 1 wrong side with a crochet, and again the front and back;
2 p. - it is knitted in the same way as the first one, only instead of facial ones they knit purl;
3r. - performed as the first;
4r. - edge, 1 person. p., purl 4, yarn over, 1 person. and four out. p., one person., thread sketch, four out. and 1 front loop;
5r. - starts from the edge, then 1 wrong side and five faces., 1 out. p., crossing two by two to the left side, 1 out. p., five persons. and one out. P.;
6r. - knits like a fourth;
7 p. - edge, then wrong side, three faces. p., two joint with a slope to the left side, 1 out. p., four persons., 1 out., two joint to the left side, three persons., 1 out.;
8r. - edge, persons. and two out., two joint inside out, 1 persons and four out., 1 persons and two joint behind the back wall, three out., 1 persons .;
9r.- knits like the seventh line;
10r.- performed as the eighth row.

Openwork braids are constantly repeated in knitting from the first to the tenth p. Openwork braids will look great on a summer jacket or top.

double braid

If you take all the varieties, then the double is considered the easiest to perform. It consists of only 2 plexuses. The pattern can be changed independently by increasing or decreasing the distance between the main ornament.

The description of the scheme begins with the fact that you need to dial loops that will be divisible by twelve, not counting the edge and 3 points of symmetry. The first and fifth lines are performed in the following sequence: 3 persons. n. and 3 out. p., and the last three are knitted together inside out. The second line is knitted on the reverse side of the front and back. In the third lane, you need to tilt to the left with the help of an additional knitting needle. Tie 3 out. p. and 3 persons., and transfer three more to the auxiliary tool. After that, 3 sts are knitted inside out, and the transferred ones are performed by the face. The new row is performed in the same way, only with an inclination to the right. The ninth row begins to knit, as from the first. The knitting pattern of a double-sided braid and its description are demonstrated in detail in the video material.

Video: How to knit a double-sided pattern

Wide or triple braids

The scheme of this pattern is also called the "royal braid". Its description is not complicated, as it might seem at first glance. In the first r. performed only by persons. n. Starting from the second strip, all out. R. knit with the same loops. The description of the knitting of the next row will occur as follows: remove 5 points without knitting and transfer them to another knitting needle. The next 5 sts will be persons. way. Then ten faces. p. and 5 p. are also transferred to an auxiliary tool. After that, knit 5 persons, and after them all the rest that were transferred.