How to weave snowflakes from elastic bands for the New Year holidays. Do-it-yourself snowflake from gum Like weaving a snowflake from gum

On the eve of the New Year, snowflakes, snowmen, Christmas trees and everything connected with this wonderful holiday are becoming relevant topics for weaving. In this article, we will learn how to weave a snowflake out of rubber bands.

Instructions for weaving snowflakes on the machine

The color version of the elastic bands can be selected at your discretion. In our example, the frosty beauties will be blue and white. For weaving six columns of the machine will be involved. First you need to weave each ray individually, and then connect them into a complete snowflake.

We take an elastic band of white color and wrap around the hook four times. We stretch the blue rubber band through the white. The result was a kind of figure eight wrapped in the middle. Pull on the second pegs both edges of the blue iris. Now we stretch it on both edges of the machine from the second to the first and third columns. This is the first layer of weaving.

On the first and third pegs, we dress with a figure of eight on a white elastic band. They form a second layer. The irises of the first layer are discarded from the first and third columns inward. Further weaving continues with blue elastic bands. The sequence is similar to the previous step. We put the next layer on the first and third columns with the figure eight and drop the previous layer of weaving inside.

On the second pegs we stretch a rubber band of blue color. We do the same with the bottom row. We put snow-white gum on the first and third columns. The bottom row must be removed through the outside towards the center.

Now, to complete the weaving of the first ray of snowflakes, you just need to transfer all the rubber bands from the right row of the machine to its left row. The first element can be set aside to free the machine for the next.

The total number of rays in a snowflake is five. When they are woven, you can begin to complete our product. We take two white irises and throw the components on them. Their ends must be connected with a loop. The weave is completed.
The scheme is quite simple, so even an inexperienced craftswoman will figure out how to weave a snowflake out of gum. Experiment with colors, use rubber bands that glow in the dark. Such products can even be used as decorations for the Christmas tree.
Snowflake in a different weaving pattern.
We take an iris and wrap four times around a machine column. Then we connect this column with the neighboring two more irises. Repeat these steps two more times. Thus, we have six columns with a similar pattern. On each pair we make eights, throwing the lower rubber band to the center. Loops are removed using a hook.

Use the hook to spin the beam to the desired length. We repeat the procedure five times so that the corresponding number of rays is formed on the instrument. Using a hook, we pass two irises through the loops and tighten the knot so that the snow miracle does not crumble. We straighten the elements, the product is ready.

Weave a snowflake on a hook

Res. wrap around the hook four times. Through it we pass the second. Repeating this step, weave three blanks. Throw three blanks to 1 cut. The first ray turned out. Our snowflake will be five-pointed.

Five parts must be worn on the rubber band. Simply hook it up and stretch it through all the loose loops of the elements.

When they are connected into a single whole, you can tighten the knot so that our gift does not fall apart.

Any snowflake can be presented as a keychain to your loved ones. Simply attach the eyelet to one beam and the key ring is ready.

Video: Lessons weaving snowflakes from rubber bands

Comments

How to weave a snake out of rubber bands using photo and video tutorials
How to weave spider gum on a slingshot and a loom according to MK photo

Evgenia Smirnova

To send light into the depths of the human heart is the artist’s purpose

Content

Weaving from small silicone rubber bands is a fascinating, interesting activity that captivated children, adolescents and adults. Many needlewomen with pleasure create various bracelets, pendants, key rings, animal figures from this multi-colored material. How to weave a snowflake out of rubber bands, you will learn from the workshops and videos for beginners, located below.

These beautiful crafts are done both on the machine and with a hook, on the fingers, on the slingshot. They can serve as a keychain, pendant for a mobile phone, decorating a room, Christmas toy.

Step-by-step instructions for weaving a snowflake from rubber bands on a machine

Using the following step-by-step master classes, you will learn how to make a snowflake using different techniques and schemes. You may need a hook and a machine for work. The last tool is an immovable platform with plastic transparent nozzles, on which, in the process of weaving, you need to string elastic bands. You can choose the colors of irises at your own discretion; items made of a material glowing in the dark look especially interesting. Prepare the rubber bands with a margin and you can start.

Christmas snowflake on the machine

This step-by-step master class is dedicated to weaving figures from white and blue rubber bands. You can use this craft as a Christmas tree decoration or give it to your relatives and friends as a gift. Prepare the machine for work: remove one extreme row from it, position the tool so that the open sides of the peg look at you.

Weaving will be carried out on six columns. You can use any colors that are enough for your creative imagination. The figure will be created separately according to the rays, which at the end you will connect together with one product. Here is the step-by-step instruction:

We wind the rubber band in four turns onto the hook, we throw the blue one edge, remove the first one in the center of the latter. Both ends of the blue iris cling to the second columns, as shown in the photo.
We stretch one edge of the blue rubber, clinging to the first and third pegs. We do the same with the other side.

On one white rubber band without twisting with an eight, we cling to the first and third pair of pegs. On the left and on the right, we drop the bottom layer inward from the outside.
In the same sequence as in the previous step, we sketch the blue rubber bands. Drop the bottom inwards.

We stretch the blue gum and cling to the second columns. Repeat this action with the lower irises of the same color.
We catch white rubber bands for the first and third, blue - for the central pairs of pegs. Remove the bottom row to the center through the outside.

Next, you need to throw the gum from the right row to the left. One ray is ready, remove it, helping with your fingers and clinging to the hook.
We make five more rays as described above.

We drop all the rays into a pair of white rubber bands. Connect the ends of this pair, make a new iris loop. The product is ready.

Snowflake from rubber bands glowing in the dark

In this master class, you will learn how to make a snowflake from irises. The use of luminous material for the manufacture will help to make the product of amazing beauty. Install the machine so that the nozzle holes look in your direction. Use this instruction:

The first iris must be strung in four turns. Next, we throw a pair without twisting.
The same pattern is repeated twice on the following columns.

The lower layer, wound in four turns, is thrown off through the top to the center.
Remove all the loops on the hook. We shift them to a new pair of irises, this will be the tip of the ray.

Weave the rest of the beam to the desired size.
Weave five more of these rays.

We transfer all the rays to a couple of rubber bands. We connect both ends of this pair with one iris, form a loop, tighten. The thing is ready.

Video tutorials for beginners on weaving snowflakes without a machine

If you just started to take your first steps in needlework with the Rainbow Loom set for creativity and did not have time to get a special rainbow loom, do not despair. You can make a snowflake out of gum without this tool using a hook, prongs of a fork. Experienced craftswomen advise using a knitting metal tool, since it is more convenient to use. To master the creation of this craft, see how to make a snowflake out of rubber bands, in the video below.

A clear and consistent demonstration of the process allows even beginners to learn. The scheme of weaving the product is very simple, but you need to be patient, carefully monitor the video instruction. Before work, prepare a sufficient amount of elastic bands of suitable colors so that nothing distracts you during the weaving of this Christmas tree toy or decoration for the room.

Easy way to weave on a hook

Christmas toy snowflake from small erasers

Multi-colored snowflakes without a machine

Found a mistake in the text? Select it, press Ctrl + Enter and we will fix it!

Weaving from colored rubber bands is actively developing as a new direction of art. Now needlewomen weave not only jewelry, but also different toys.Volume figures from elastic bands They are durable and beautiful, therefore, they can be used for interior decoration. Adults and children are happy to weave Rainbow Loom elastic bands, try weaving something too. In this article you will learn how to make a snowflake from gum, we offer a detailed master class with photos and videos.

How to weave a snowflake out of rubber bands video

To to weave a volume snowflake from elastic bands on a hook, you will need the Rainbow Loom erasers, either one color or two-tone. First you will need to take one rubber band and wrap it around the hook four times. After that, take another gum and pass it through the wound so that all the loops are on it. Put the free part of this elastic on the hook.

You need to make three identical blanks. Then take another gum and begin to take off these blanks on it. As before, the free part of the elastic must be put on the hook. Put on the loops again on another gum and put its ends back on the hook. This will be the first ray of snowflakes, so for now you can remove this workpiece from the hook. By the same principle, you will need to prepare five parts for five rays of snowflakes.

When all the parts are ready, put them on the hook, take a new rubber band and thread it through the parts.

Watch the video: Snowflake from Rainbow Loom Bands WITHOUT MACHINE

Guided by the principle of “Prepare a sleigh in summer”, I have already prepared for you photo and video master classes “ How to weave a gum snowflake«!

Since the colors of winter are white and blue, snowflakes in white, blue and blue will be most relevant. However, no one forbids weaving snowflakes of any other color and even multi-colored.

Such snowflakes will be a wonderful decoration during the winter holidays and on the Christmas tree, and for the house, and for the class. This is also a great idea for a New Year's souvenir to relatives and friends!

To weave a snowflake from elastic bands you will need:

105 elastic bands of a suitable color;
hook for weaving or knitting (No. 4).

How to weave a snowflake out of elastic bands?

Weaving snowflakes is performed using the hook from the set, it is better if it is metal, not plastic. You can also use a regular crochet hook. The number 4 hook is perfect.

Screw the elastic band onto the hook, making 4 turns.

Then hook the two rubber bands and pull them back, putting them on the ring finger or middle finger of your left hand. Gum tension is necessary so that they do not slip off the hook.