Women's socks with knitting needles for beginners. Learning to knit socks: instructions and description. Video: Knitting tracks

Openwork socks with knitting needles are as simple as standard socks. These lace and easy-to-make new things with an ornament will help not only warm the legs, but also bring pleasure to the person who wears them, because the patterned socks look just great. How to connect them? This article will present the best schemes of such work with a step-by-step description.

Openwork socks with knitting needles are as simple as standard socks

Openwork elastic is very beautiful, it looks interesting and stylish. The patterns of elastic bands can be different, if desired, the master can find any scheme with a detailed description that he will like.

The work consists of the following sequential stages of knitting:

On the needle, 66 stitches are typed. The first 2 rows are knitted face. This rubber band is openwork, so you won’t have to rely on the product getting warm.
The toe, the back of the work and the foot should be tied with a front smooth surface. As for the elastic, it will be knitted on 15 loops out of 66.
The openwork pattern should be made as follows: 2 loops knit face, 2 - together, double crochet, 1 stitch is removed, then the front loop is knitted through the just removed. The second row should be knitted face. The pattern is repeated until the end of knitting gum.
How much do we knit such an elastic band? For standard lace socks, it is enough to tie 16 cm of elastic. If desired, this number can be reduced or increased.

Openwork short socks with knitting needles for newborns (video)

Knitted socks for women: a simple description

One of the easiest ways to create fishnet socks is to knit them in a spiral. These female socks are very cute.

The work consists of the following stages:

First, materials are selected. Need yarn and knitting needles. For knitting socks use circular knitting needles.
Now on 4 knitting needles to dial loops. The fifth spoke is the working one. For a medium-sized leg, approximately 25 stitches are dialed.
The first thing you need to do is tie the gum. If the yarn is large, you can knit 1 on 1, if medium or small, then it is better to do 2 on 2.
When knitting a sock after the elastic, a spiral-shaped circular fabric should be formed, for this, on top of one wrong loop, you need to make 1 front loop, and vice versa.
When more than 10 cm of the product will be knitted, it is necessary to try on it without removing it from the working knitting needles. This is necessary to determine the correct density of knitting. If the toe sits on the leg too loose or, on the contrary, too tightly, it is better to dissolve it and start again, having typed the desired number of loops.
After the product has acquired the desired length for the craftswoman, you should make a decrease for the toe. Decreases are made evenly. In each group of loops, the same number of loops should be reduced for symmetry. It is recommended to use a pin so as not to forget where the circle begins.
In these socks there is no heel, this is their feature.

These female socks are very pretty

Tip: Unfortunately, such a pattern can stretch over time. However, this can be prevented, for this after washing, such work should be twisted in a spiral. They should dry in this condition.

Knitted baby socks

Knitting socks for children is especially nice. There are a lot of ideas for such openwork.

Here is one of them:

Children's socks should be made of warm thread so that the child’s feet do not freeze. Therefore, preference should be given to either woolen or half-woolen yarn.
This knitting method is called "Ladybug". The yarn used here should be red and black.
Knit should be in 2 threads. After a set of loops, you can begin to knit the elastic. Children's socks should not have too wide an elastic band, therefore it is possible to do it 1 on 1.
After this, the cuffs are tied with a red thread. To give it a delicacy, each front loop should be alternated with a crochet. The second row is tied with the wrong side. Thus, small holes are obtained.
Next, the heel is tied. For this, a black thread is added to the work.
Loops get along the edge sides of the knitted heel, and knitting of the toe continues along the foot. The sock should make the eyes of a ladybug. To do this, several symmetrical double loops are knitted on the front of the product with black thread.
At the end of the work, the sock must be turned inside out and, using the hook, stretch the protruding threads inside.

Knitting socks for children is especially nice

Knitted lace pattern on children's socks

Children's products can be knitted as you like. In this case, it is difficult to create a tasteless thing, because children like colorful and vibrant products. They especially love clothes and shoes that remind them of some kind of animals or cute creatures.

As for openwork patterns, there are a lot of them. A craftswoman can find such patterns in knitting magazines or on the Internet, most often these are patterned leaves and flowers.

Here is one of these patterns:

It is necessary to pick up yarn in two colors: light blue and white.
The first row is knitted with front stitch. Further, in all circular rows, knitting occurs in the facial way.
A pattern will form, so it is important to ensure that the yarn of a different color does not lie on the front side of the product. For this, the threads cross on the wrong side.
In order not to stray and knit the pattern correctly, you can print a diagram for yourself and put small dots with a pencil in the place where the master is currently located. This will help not to stray.
The heel of the sock should be knitted in blue. In general, it is not recommended to knit the area of \u200b\u200bthe heel and foot of the toe in a light color, since all dirt is visible on it.

Scheme of work

What will be needed in the work?

First of all, it is necessary to prepare materials for knitting.

Among them:

Yarn. You should not save on it, because not only the appearance of the future product, but also the period of its wear depends on the quality of the threads. The better the thread, the longer the product made from them will last for the owner.

First of all, it is necessary to prepare materials for knitting

What is the best composition for choosing threads? The answer to this question depends on many factors. For example, if a craftswoman wants to make warm socks, she should not purchase acrylic threads, as this is a synthetic material that will not warm her legs. She should give preference to woolen or mohair yarns.

Knitting needles. In this case, special knitting needles should be used. In their set 5. It is best to use metal knitting needles.
Hook. It is convenient for them to stretch the strings to the wrong side.
Scissors. They are used at the last stage of work, when you need to stretch the threads to the wrong side.

Those who are engaged in knitting openwork socks for the first time should learn to make ordinary socks, not lace. This is necessary in order to understand the principle of the work itself.
The most difficult thing in this matter is knitting the second sock so that it exactly resembles the first. To do this, it is important to knit them with the same density.
To make the work rainbow and more beautiful, it is worth using several colors of yarn.
To extend the period of socks and prevent them from rubbing in the heel and foot, you should use a special thread in the knitting of the lower part of the sock. It is very thin and serves to prevent the product from rubbing when walking.

Openwork socks with knitting needles: master class (video)

Knitting lace lace socks is an activity that even a beginner can handle. The main thing in this matter is to follow the scheme correctly.

In vain, many consider knitting socks an uninteresting and dull occupation, completely unrelated to creativity. This is not true! With a little skill, diligence and patience, you can create not just socks, but a real masterpiece, emphasizing the old truth: beauty is everywhere.

Even knitting socks can be approached as creating a favorite accessory or an exclusive gift that will be welcome. So, the topic of this article is knitting openwork socks, or rather, choosing the right pattern.

It is no secret that openwork patterns, even the simplest ones, are always exquisite and do not like. Therefore, the thread for knitting should be medium, closer to thin. The reference will be the footage of a hundred-gram skein: the length of the thread in it optimal for good lace is 500-600 meters. Socks made of yarn of this thickness will be moderately thin and warm. The composition of the thread can be any, it all depends on your own preferences, but experienced craftsmen recommend choosing high-quality wool yarn with the addition of polyamide fiber to strengthen the product and extend the life of the product.

Today there are special series of sock yarn produced by many manufacturers, with the composition of 70-75% of wool and 25-30% of polyamide. Note that the masters in this category are supportive and respond very positively to it. Material consumption - about 100 grams per pair of socks.

Necessary tools

They perform work on five toe needles (they are also called needles, since there are no clamps on them). For non-thick yarn, the tools should also be proportionate, so needles No. 1,5-2 are the most suitable option. In the process, special markers may be required, which can serve as office paper clips, multi-colored remains of yarn, etc.

Choosing patterns for socks

Approximately such a pattern is shown in the second photo - a lace strip of rhombuses, underlined by a small pigtail, framed on the edge by a thin lace path. The article will consider several options for patterned knitting of a sock: fully openwork, textured tracks, alternating braids with openwork stripes.

Openwork socks with knitting needles: schemes

Let's start with the simplest drawings that form simple openwork tracks. Since even the most primitive openwork adorns the knitted fabric, for beginners knitters is the best option. So, we are dealing with the question of how to knit openwork

Schemes of narrow and wide openwork paths:

5 loops are involved in a narrow strip of lace, but it is necessary to highlight the pattern on the canvas, adding a purl from each side.

The track runs like this:

1 p: \u200b\u200b1 yarn (H), from 2 loops knit one facial (VL), 1 person., 2 VL, 1 N.

The 2nd and in all the following even circular (after all, the sock fits in a circle) rows are knitted according to the pattern.

From the 3rd to the 7th rows: 1 persons., 1 N, 3 OHL, 1 persons.

From the 9th row, the pattern repeats. In the diagram, the resulting openwork path is edged with a small pigtail from the overlap of two loops. The number of rows of rapport intersection depends on the master.

A wide strip of lace can serve as an independent pattern, fully occupying the canvas. In the photo - just such an option. The “Hearts” pattern results in a repetition of a strip of 13 loops. Rapport drawing - 16 rows. The generally accepted symbolism of the loops used in the scheme will help to figure out the pattern yourself.

Knitted knitted socks with knitting needles of such patterns (the diagrams are presented in the review) are simple in execution and beginners are quite capable of it.

Leaflet Pattern

Modern masters skillfully use the excellent decorative effect of this pattern in many models. Socks did not stand aside. The presented photo demonstrates white socks with a central openwork strip made by the "Leaflets" pattern.

We will get acquainted with the order of this simple, but very effective drawing.

The pattern is 10 rows and 27 loops, which almost completely covers the front of the toe. It fits in like this:

1 p: \u200b\u200b9 facial, 2 overhead lines, 1 H, 2 faces., 1 out., 2 facial, 1H, 2 overhead lines, 9 faces.

2 p: 8 of., 2 loops knit out. (VI), 2 of., 1 N, 1 of., 1 persons., 1 of., 1 H, 2 of., 2 VI, 8 of.

3 r: 7 facial, 2 overhead lines, 1 person., 1 H, 3 persons., 1 out., 3 facial, 1 H, 2 overhead lines, 7 persons.

4 p: 6 from., 2 VI, 3 from., 1 N, 2 from., 1 front, 2 from., 1 N, 3 from., 2 VI, 6 from.

5 r: 5 persons., 2 VL, 2 persons., 1 N, 4 persons., 1 out., 4 persons., 1 N, 2 persons., 2 VL, 5 persons.

6 p.: 4 from., 2 VI, 4 from., 1 N, 3 from., 1 persons., 3 from., 1 H, 4 from., 2 VI, 4 from.

7 r: 3 lts., 2 OHL, 3 persons, 1 H, 5 lts., 1 out., 5 lts., 1 H, 3 lts., 2 OHL, 3 lts.

8 p: 2 out., 2 VI, 5 out., 1 N, 4 out., 1 front, 4 out., 1 H, 5 out., 2 VI, 2 out.

9 r: 1 lts., 2 VL, 4 lts., 1 N, 6 lts., 1 out., 6 lts., 1 H, 4 lts., 2 VL, 1 facial.

10 r: 2 VI, 6 out., 1 N, 5 out., 1 person, 5 out., 1 N, 6 out., 2 VI.

From the next row, the pattern begins to be knitted again. Such a floral pattern in the central part of the product is a very successful option, which combines the simplicity of performance and the effectiveness of the finished product. With this pattern, it is easy to knit openwork socks with knitting needles. A description of the execution of the central strip should also not cause difficulties.

Overlaps, plaits and braids in knitting openwork socks

Openwork patterns when knitting socks are often complemented by various weaves - braids, medium-sized arana, elongated loops and other decorative techniques.

You can give many examples of the successful combination of lace and braids, but to talk about all the drawings in the same article is impossible, and not necessary. The models shown in the photographs clearly illustrate the possibility of combining various weaves with lace inserts or stripes.

Often there are small braids, in the intervals between overlaps of which the masters make openwork holes. Sometimes narrow aranes are used, which add extra density to the product and contrast with delicate textured paths.

In a word, patterns for socks can be made in different variations. Another important rule: the work must be done carefully, trying with equal force to pull the working thread so that the canvas is even and equally dense. Subject to these simple conditions, openwork socks with knitting needles, patterns of patterns for which we examined, will become original and unique.

Do you like warmth as we love it? Then it was time to learn how to knit socks and put this knowledge into practice as soon as possible! You have at least 3 reasons to learn how to knit socks do it yourself.

Hand-made things are much more beautiful, warmer, it is more pleasant to wear them.
Hand-knitted socks will cost you much cheaper than the finished product, because you will have to spend only on yarn.
Knitting soothes and brings peace.

We convinced you that hand-knitted socks are cool? Then let's get down to business soon.

Oddly enough, the easiest way to knit socks is to use 5 knitting needles. However, do not be afraid of so many tools: on 4 knitting needles we will be stitching, and the fifth knitting needle will be working. Next, we will tell you how to knit socks with needles for beginners on 5 needles step by step and demonstrate simple master class.

The first thing we need to do is measure the leg to gain the required number of loops. We will take measurements in two planes:

The average leg circumference is defined as follows: we find the sum of the two above-mentioned measures (lifting circle and leg circumference) and divide the resulting number by 2. For example, the first measurement we have will be 31 cm, and the second - 21. Then we sum these two numbers and divide the sum by 2. As a result, 26 cm comes out. We recommend rounding the resulting number of centimeters to a multiple of 4. After all, it is at this length that we will dial the required number of loops, and distribute them into 4 knitting needles.

We collect loops in the amount in which we determined.
Evenly divide the loops between 4 knitting needles and knit an elastic band. This will be the top of the sock, and we will move to the toe of our product, using circular knitting. This method of knitting is suitable for both adults and children's socks. Socks are tight and neat, sit well on the leg.
The standard length of the upper toe gum is on average 5-6 cm.
After the elastic, you need to knit 7-8 cm with facial loops, up to the heel. Knitting the heel will occur with the help of two loops, i.e. when using half of the loops of the amount that we scored.
Using two knitting needles for knitting the heel, we knit 5.5-6 cm with the front loops, which will be the height of the heel. This figure is unchanged for those with a foot size of 35 or more.
The next step will be to give our heel the necessary shape. To do this, we do the descent of the heel, dividing the loops into 3 equal parts. We send the extra loops to the central part, and the loops located on the sides are gradually knitted together with the central loops. Thus, we form the sides of the heel. You can consider more detailed instructions for knitting the heel in the article further.
We lower the loops from the wrong side and end the descent from the front. We knit 2/3 loops with purl loops.
We knit 2 loops together: among them will be the last loop of the central part and the first loop of our third part. It is these loops that we knit together on the wrong side.
We turn the work and knit the front side of the heel, removing the first loop. We will not knit it. The subsequent knitting is carried out with facial loops., and at the very end we knit together the last loop of the central part and the first loop of the first part. This method is called broaching, when the first loop is removed, the second is knitted with the front one, and the removed loop is transferred to the knitted one.
Again we turn the work and remove the first loop without knitting.
We continue to knit according to the previous scenario, with facial loops. We knit until all side loops are closed.
Loops from the side of the heel we dial on the knitting needle so that from each second row one loop is gathered and one additional, that is, 3 loops from two rows.
We return to circular knitting using loops from those knitting needles that we have not yet been involved. And also we take in work loops from sidewalls of a heel and loops of the central area of \u200b\u200ba heel. We make one row of facial viscous.
In order to better fit the toe to the heel, we knit every second circular row like this: the third and second stitches from the end are knitted together from the end of the first knitting needle, the front loop, as well as the second and third loops of the fourth knitting needle, are knitted together.
Reduce the loops until we get the number of initially typed loops.
We proceed to knitting the foot (face viscous in a circle). We tie to the end of the little finger or to the bone of the thumb.
Knit toe sock. The reduction of loops according to the following pattern: in every second row, we knit the third and second loops from the edge of the odd knitting needles with facial loops (together). Similarly, we knit the second and third loops of even spokes with a broach.
After the number of loops reaches half, decreases begin in each circular row, until there are only 4 loops on the knitting needles.
We tighten the loop with a thread and fix it.

Like this pretty quick and easy way to knit socks we showed you. For clarity, the creators of the master class used multi-colored yarn, so it turned out pretty fun option. You can take threads of any color or try to make socks with patterns. Next, we show you beautiful knitting patterns for socks.

We already told you a little about knitting heels in the previous section. I would like to dwell in more detail on how to knit the heel of the sock with knitting needles: a detailed description can be found in the photo with professional explanations and knitting patterns.

We knit socks for every taste: photo-schemes of beautiful patterns

As we promised, patterns of socks with patterns will help bring a little color and creative harmony to your life. After all, socks are not such a boring wardrobe element.

Just look at how many varieties of socks you can knit with your own hands.

Tracks
Plain double-knit socks
Fishnet socks
Super soft seamless toe
Pigtail Socks
Socks or
Socks for babies 1 year old and older
Men's socks (for men who have 42 feet or more).
Women's socks with a diverse pattern, high, or, conversely, short sports socks.

You must admit that this hosiery variety is impressive! And you can create all this yourself, the main thing is to learn how to correctly calculate the loops, carefully knit the heel and toe, pick a good, well-fitting model. After you learn the simplest basics of knitting socks, you can create real masterpieces for yourself and your child, and for the whole family.

What yarn is better to knit socks?

Many beginning craftswomen, starting to knit, often wonder, what yarn is best to knit socks? After all, I want this piece of clothing to be worn for a long time, and it was comfortable and warm.

Wool socks. Very warm, but quickly wear on the heel.
Wool socks. Practical and soft.
Socks from yarn z the addition of fluff, angora, synthetic fibers. Such mixtures greatly strengthen the thread and make the product durable, warm and durable.
Socks from the yarn "Village" with the addition of synthetic threads on the heel and toe.

How to knit socks with knitting needles for beginners: a step-by-step video with explanations

We already told you a lot about socks, it remains to be shown how to knit socks with knitting needles for beginners: a step-by-step video will demonstrate everything in great detail. We wish you success!

How to knit baby socks? Beautiful children's socks can be obtained thanks to one of the knitting patterns for adults. Just keep in mind that the number of loops must be significantly reduced. It is very easy to calculate, and to tie it too! Therefore, even a novice knitter will cope with such a task as knitting socks for a child.

How to knit baby socks? Necessary materials and tools

3. We knit with an elastic band 1 x 1 about 3 cm to get the upper part of the sock. Then we switch to stocking and knit 4 cm to the heel.

4. We turn to knitting a children's heel. For this, two knitting needles will have 8 loops, and on the third knitting needle we will define 16 loops. It is this side that we knit 3 cm and then lower the heel.

5. To accomplish this simple task, we knit 10 stitches with the facial, and 11 and 12 - we knit together. Turn the blank of the sock. On the wrong side we knit 5 loops, and 6 and 7 - together. So create a heel for a baby sock until 6 stitches remain.

6. The heel for the baby sock is ready. Therefore, we can proceed to the formation of the rise. We pick on two knitting needles for 5 hem. Such a number of loops will be enough for a baby aged 1.5-2 years. However, if the child has a large lift, then it is possible to increase the number of loops without problems.

We distribute the obtained loops on four knitting needles. We knit to the little finger in a circle stocking viscous, and then to reduce the number of loops, we knit a pair of loops together at the end of each knitting needle. We make a smooth descent and stretch the last 4 loops through the thread. We fix it.

7. So the first sock for the baby is ready.

It remains only to repeat all stages one through six so that the child can put warm and soft socks on its legs. That's all, baby socks are ready. Socks can be decorated with a thin satin ribbon that will harmoniously look in color with threads in socks.

Elizaveta Rumyantseva

For zeal and art there is nothing impossible.

Content

Warm socks are knitted in different ways: with circular knitting using the Medjikluk method, on five knitting needles, from the top or from the toe. There are options for stitched socks. The classic method is knitting socks on five knitting needles from a cuff made with an elastic band.

Knitting cuff and top

If you decide to knit socks on 5 needles according to the description, then you need to know that the number of loops for each craftswoman can be her. It all depends on the size, type of yarn, knitting density, thread tension on the finger. To do this, take measurements and tie the sample. Be guided not by the number of loops and rows, but by the width and height in centimeters.

For socks you will need:

Wool yarn - 100 grams of one color, for example, gray, and the remains of a yarn of another color, for example, blue. Do not take clean wool, heels and socks on such a product will quickly wear out. The composition of the yarn should be from 20 to 50% synthetics. Knitting children's socks on 5 needles requires less yarn, 50-80 g.
Set of sock knitting needles. Of these, one spoke will be working, on the remaining four there will be loops.
Hook. It is useful for hiding the ends of the thread.

Knitting socks on 5 needles begins with a cuff and has the following steps:

Using blue yarn, pattern with the usual cross-shaped set of loops. Their number will depend on the chosen yarn or your knitting density, but it should be a multiple of four.
Distribute the loops evenly over the four knitting needles, close in a circle.
Knit with an elastic band 2x2 (2 front, 2 wrong) 3 rows. Do not break the thread, otherwise you will have to make knots.
Change the thread to gray, knit 4 rows with an elastic band. Do not break the thread.
Change the thread from gray to blue, knit 4 rows.
Make 2 more strips of gray and blue. Tear the blue thread. You should get 5-7 cm. You can increase the height by tying your knee-high socks, or, conversely, reduce it as you wish.

When the cuff is ready, knit a few centimeters in a circle with gray yarn with the front surface. Here you can also change the height as you wish. Many craftswomen use not boring facial surface, but patterns, for example, openwork stripes, braids, jacquard.

Heel pattern

The next step in knitting will be the heel. Her scheme is as follows:

First you need to untie the height of the heel. To do this, take the stitches from two knitting needles (half the stitches) and knit 6-10 rows with the front stitch by turning knitting. To do this, knit these loops face, then turn the knitting over, knit them on the wrong side, turn them over again, face, etc. For children's or women's socks, 3-4 cm is enough, for men's need to knit 4-5 cm.
Conditionally divide the number of loops from which you knit the heel into 3 equal parts: one part will be central, and two extreme. Passing the next front row, knit together one loop from the far right and one from the central, and then one from the central and one from the far left. Conditionally transfer these loops to the central part.
Do the wrong side in the same way.
Repeat until you have only the center part loops left.

Main part

You move on to the basics. It fits in a circle with the front surface and has the following algorithm:

Knit the front row of the heel and dial the loops on the side for the edge.
Next, knit deferred loops from two knitting needles that remained untouched after the top.
Type a few more loops from the “sidewall” of the heel using the hem.
Tie the heel loops.
If the number of loops turns out more than at the beginning, then make a few gradual decreases.
Continue to knit in a circle, evenly distributing the loops on the four knitting needles, until the beginning of the big toe, plus 1-5-2 cm. The length of the base depends on the size of the leg. Do not forget that socks after washing can sit down, so it is better to leave a centimeter in reserve.

Toe

The final knitting of socks on 5 knitting needles is the toe:

Knit the stitches from one knitting needle face, knit the last two stitches together.
Repeat the process with the loops on the second spoke, third and fourth.
Knit until 2 stitches remain on the knitting needles.
Pull the working thread through the remaining loops in the form of a loop and fasten. Making it all easier with a hook.
Tear the thread and stretch the end inside out of the sock. Thread the end of the thread that remains on your cuff after looping.