We make a kinder surprise ourselves. How to make a big Kinder surprise. Large chocolate egg

To surprise your baby for any holiday, you need to turn on your imagination ☺️. An original option would be to present a gift in a very large Kinder Surprise egg made with my own hands. This craft is empty inside and you can put various sweets or a toy in it ✨️.

Homemade kinder surprise made from paper

✔️ In this version, the egg is made from a ball that needs to be covered with paper. For gluing, you can use PVA glue or prepare a homemade paste.

To prepare the paste, you need:

Mix 1 tbsp. l. corn starch and 2 tbsp. l. tap water.
To stir thoroughly.
Take half a glass of boiling water and pour it over the mixture.
Stir and put the mixture on fire.
Stir continuously until thickened.
Remove from heat and stir a little more.
Refrigerate before use.

You can first add water to PVA glue.

To make a huge egg you will need:

printed inscription;
water;
balloon;
A4 paper;
newspaper;
PVA glue;
paints (gouache);
water;
to prepare the paste, starch or flour;
brush.

Steps to make an egg:

The balloon is inflated to the required size and tied with thread so that it can be untied later.
To make it more convenient to work with the ball, it must be placed in some container.
Apply the first layer, which consists of water and paper. The paper is cut into small squares. Then dip each square in water and place it on the ball. This is how the entire surface is covered. All actions must be carried out at a fast pace, as the water dries quickly and the sheets of paper will begin to fall off. Instead of paper, you can use newspapers. Then the ball is covered with white paper last.
After the entire ball is covered, you need to let it stand for 5 minutes to dry.
The next layer consists of glue or homemade paste and paper. The ball is generously coated with adhesive and a second layer of paper is glued on. In order for the paper to be well saturated, you need a lot of glue or paste.
Next, the future egg is also generously coated with glue and a third layer of paper is glued on.
Leave the egg overnight to dry completely. It is best to dry near the radiator.
After the paper has completely dried, the stage of removing the ball begins. To do this, the tail is untied or cut off, and then the ball is carefully removed. The resulting hole must be sealed.
The next day, three layers are glued again and dried again.
Then you should paint the egg: for this, on the lower part with a simple pencil a wavy line is drawn and then painted over with red gouache. The upper part is painted in White color gouaches. Instead of gouache, you can use acrylic paints or water-based emulsion. It is worth adding PVA glue to gouache paints, then the paint will not crack or stick to your hands while it dries.
Next step: make an inscription. You can print it on a color printer or draw the letters yourself and color them. In your own performance it will look more real. You can attach a piece of paper to the monitor and trace the letters. Then cut each word and glue it individually.
Next, a “door” is made in the egg. Its shape can be square or round. Cut with a stationery knife. Inside is filled with a gift.

You can write the child's name on the egg or stick your favorite cartoon characters on it, or you can make it in the form of a smiley face or mmdms. By applying varnish the surface can be made glossy.

Huge egg made of plaster and paper

This version of the egg will be stronger and smoother.

To create a kinder you will need:

printed inscription;
water;
balloon;
A4 paper;
newspaper;
PVA glue;
paints (acrylic);
water;
to prepare the paste - starch or flour;
brush;
gypsum;
sandpaper;
for a magnetic door: magnet, cardboard;
putty or self-hardening clay.

Manufacturing steps:

The balloon is also inflated, covered with paper and dried. The description is given in the previous method. Pasted in three layers.
After the workpiece has completely dried, the balloon bursts and is removed through the hole. The hole is sealed.
Next comes the priming stage. For this, putty or plaster is used. The layer should be applied evenly.
After the putty or plaster has completely dried, the stage of making a hole in order to put the gifts is carried out. The hole will be a door that can be removed. A stationery knife is used to cut it out.
To make it possible to remove the door, a magnet is glued into it, and the top is sealed with paper in several layers. Cardboard is glued into the base, then a magnet is placed, and paper is placed on top. Gluing is done using PVA glue.
The egg and door are sanded with coarse sandpaper. This gives the egg perfect smoothness.
After sanding, pits and depressions appear on the egg. In those places where they are deeper, plaster is re-applied, time is waited for drying and sanded with fine-grain sandpaper.
Next is the painting stage. At the bottom of the red acrylic paint waves are drawn, and the upper part is painted white. Then the inscription is printed on a color printer, each letter is cut out and pasted onto the “kinder”. It is also possible to write letters with a simple pencil and paint them with colored acrylic paints.

✔️ This gift, created with our own efforts, is suitable for any holiday ✨️ . It will be original and unusual. Not a single child will remain indifferent to him. Any gift can be placed inside such an egg: sweets, toys, etc. This egg with a gift can also be presented to an adult.

Video instruction: Do-it-yourself Kinder surprise

Kids are crazy about Kinders. This is connected, rather, not with the love of sweets, but with the mysterious gift that is inside the plastic egg, because it is always interesting to open the packaging, eagerly getting to the toy. One has only to imagine how delighted children will be when they are handed a simply gigantic Kinder by their standards, in the middle of which there will be not just one toy, but a whole mountain of goodies..

Do-it-yourself large Kinder surprise egg, step by step with photos

Inflate the balloon to the desired size, but do not make it too elastic, otherwise it will burst after the first layer.
Cut newspaper or office paper into rectangles, then cover the ball.
Tip: It is better to choose plain paper as the first layer, since all the drawings will be visible from the middle.
The second layer of Kinder is made from the same paper, each time dipping it in PVA glue. Leave until completely dry.
Next, make two more layers. This is necessary for the egg to keep its shape and withstand the weight of the gifts inside it.
Burst the ball inside and carefully pull it out.
Cover the remaining hole with several layers of paper. Let it dry completely.
Paint the egg with white gouache or acrylic paint.
Mark a hole for the door and cut it with a utility knife.
Make round holes for fastenings on the door and on the egg.
Pull thin ribbons through the holes.
Create a wave with red paint, leaving two places unpainted for droplets of milk.
Print out the stencils and glue them on.
Color with paints.
Include gifts.

How to make a large kinder egg, ideas with photos, 2 options

Paper version.

Creating the basis for this option is the same as described above, the only thing that differs between the options is the decor. Instead of coloring, you can cover the surprise with paper. To do this, strips of paper of the appropriate color are cut thinly, cut leaving 1.5 cm at the edge, and then glued with hot glue. The eyes, mouth, cap and hands are printed on the printer and glued on top.

Chocolate egg.

To make such a kinder egg, you need to fill an inflated ball with melted chocolate, and then, turning the ball over, spread it on the walls and let it cool. After setting, the ball is cut off and the egg is cut into 2 parts with a hot knife. If desired, the middle can be greased with white chocolate and allowed to set. The middle is filled at your discretion. The edge is slightly melted with a hot knife and the halves are glued together. You can leave it this way, or you can wrap it in foil, paint it and paint it in the standard colors of the Kinder packaging.

Large inscription kinder surprise, templates 2 options

Kinder surprise large egg made of paper, details with photo

Cover the inflated ball with pieces of paper soaked in water without adding glue. Overlap each piece on the previous one.

Dilute the PVA with water 1:1 and apply glue to the ball with a brush, let it dry completely.

Cover the ball with a second layer of paper and undiluted glue. Dry completely.

Make 1 more layer of this.

Cut the ball and carefully remove it.

Cover the hole with paper. Let dry thoroughly.

Draw a wave and a droplet with a pencil along the entire lower circumference of the egg.

Cover the white part of the egg with white paint, and the part with the wave with red paint, leaving a droplet untouched.

Print out a colored stencil and glue it on. When applying glue, the paint on the stencil may float slightly. To correct the situation, paint over the inscription with paint, and draw the lines with a marker.

Mark a door on the back wall through which gifts can be inserted. Its size depends on the size of the largest gift prepared. Cut and leave intact bottom part.

Tip: If your Kinder turns out to be too wrinkled, go over its surface with fine-grained sandpaper before painting.

How to fill a large Kinder Surprise egg, ideas with photos, 3 options

You can fill the egg with anything, from sweets to clothes. It all depends on the gender of the child, his desires and your financial capabilities. It is important that the gifts are not too heavy, otherwise the bottom may crack before delivery. We have prepared several options for ideas on what can be placed in a surprise egg.

1. Soft toy, modeling material, sweets.

3. Beyblade, Hot Wheels, cardboard construction set, metal construction set, sweets.

ANNA Bruder

I present to your attention master manufacturing class kinder surprise made of papier-mâché. Which I gave to my nephew as a gift.

Before you make it big Kinder Surprise, should be studied master-classes on its production.

Big kinder you can make a surprise with your own hands from paper using the technique papier mache. Such an egg can become an original packaging for delicious sweets or an interesting toy that a child dreams of. Making such an egg is not difficult. To make it required:

1. Newspaper or printer paper

2. Balloon

3. Scissors

4. Watercolor or gouache

5. Brush

6. Plain water, from the tap

7. PVA glue

8. Printout with title kinder surprise. It can be colored or black and white, which you can color yourself, inflate the ball prepared in advance to the desired size, and tie its tip with a thread.

All the paper you have needs to be carefully cut into pieces, and the smaller they are, the more ideal the shapes can be created.

Dipping each piece of paper into a container filled with warm water, you will need to wait a while for the paper to get wet. Heavily soaked and softened pieces of paper just need to be applied to the ball, overlapping each other, until its entire surface is completely covered with a paper layer.

Such an egg needs to dry at least from evening to morning, that is, eight to ten hours. If it does not dry well enough, it may break when you remove the ball, and this will ruin everything and you will have to repeat it all over again.

When the product is completely dry, you need to carry out "operation" by extracting a ball from its internal cavity, which served as a template for us kinder surprise. To do this, you will need to untie the lace or thread, and if that doesn’t work, just pierce the ball with a needle, and then, holding the tail, gradually release the air from it. Pulling the deflated balloon out through the hole won’t be difficult, that’s for sure, but the hole itself needs to be immediately sealed with paper.

The egg needs to be completely painted with white paint to make it look smoother and more even.

After the paper egg is completely ready, all that remains is to make it as similar to the real one as possible Kinder Surprise, that is, color it and paste the inscription that has already been copied in advance and printed on a printer - the original logo.

When everything is completely ready, you will need to use a stationery knife to cut out a large hole in the back of the craft through which the improvised kinder- the surprise can be filled to capacity with candies, toys and other wonderful gifts.

This way, you can make sure that there is nothing complicated, but your baby’s delight is guaranteed.

Publications on the topic:

Hello, Dear colleagues! I bring to your attention a master class on making objects (saucers) for the “Alexander” tea set.

Lozina Olga Olegovna MASTER CLASS Christmas tree decoration from papier-mâché gold fish"Every year in our city the city competition "New Year's.

Good day, dear colleagues! Today I want to introduce you to my work. The idea of making a puppet theater is long gone.

I bring to your attention another paper toy made using the papier-mâché method. Papier-mâché in French means “chewed.”

2017 has been declared as the year of ecology and the year of specially protected natural areas. Everyone preschool institutions countries are proposed in the work.

Original and useful gift for children and adults, for children's and family creativity. Develops finger motor skills, fantasy and imagination.

It’s not difficult to understand how to make a big kinder surprise with your own hands. It is enough to carefully study the instructions and work slowly. The simplest option is an egg made using the papier-mâché technique, filled with a variety of sweets and toys.

Tools and materials

An egg using the papier-mâché technique is durable. It can be used as reusable packaging for any gifts: candies, other sweets, toys. Original solution- fill a homemade egg with real Kinder surprises.

To work you will need:

scissors;
balloon;
thin paper (writing, cigarette, newspaper);
PVA glue;
gouache;
printed inscriptions for registration;
threads;
brush;
water container.

The inscriptions that will be used to decorate the finished eggs are printed on a printer using ready-made templates from the Internet. You can complicate the task by making the surprise personalized.

Master class for beginners

Inflate the balloon; it should take the shape of an egg. Tie the neck tightly with a thick thread to prevent air from escaping. Place the ball in a suitable sized bowl for greater stability.
Cut the paper into small pieces of arbitrary shape. The main thickness of the product can be created using newspapers, but the top paper layer must be white.
Wet the pieces one by one in water and apply them to the surface of the inflated ball. This must be done quickly, otherwise the paper will not stick together.
After applying the first layer, let it dry for a few minutes. Coat the surface of the egg with glue. The thicker the coating, the stronger the finished egg will be.
Glue the second layer of paper, trying to distribute the paper pieces evenly. Cover them with glue and leave to dry for several hours.
When the egg is dry, glue on 1 or 2 more layers of paper. The thickness of the egg depends on the gifts inside. The heavier the filling, the more durable the packaging should be.
Cut off the bottom part of the ball with thread, seal the resulting hole with paper.
Paint the egg with gouache mixed with a small amount of PVA glue. Take a real Kinder Surprise as an example. Glue the printed inscriptions.
Cut a rectangular window in the back and fill the egg with gifts. Glue the resulting door or tie it with tape.

The finished egg can be packaged in transparent cellophane: the gift will look even more festive. All that remains is to present a surprise to the child and enjoy his delight.

The papier-mâché technique is popular these days, although it appeared a long time ago. Almost any shape can be created from paper pulp. In this article we will look at how to make an egg using the papier-mâché technique with your own hands.

You will need: balloons, tissue paper of different colors, brush, hole punch, liquid starch, container, rope, clothespins, scissors.

Master Class

A small papier-mâché egg is ready! I recommend watching this video!

You will need: sheets of paper, scissors, pva glue, warm water, container, balloon, brush, candy, needle, paints, stationery knife, sticker, tape.

Master Class

Cut the paper into squares.
Inflate a large balloon.
Dip a square of paper into warm water and apply it to the ball. In the same way, cover the entire surface of the ball with wet squares.
Apply glue to a small surface of the ball with a brush on top of the wet squares and glue the wet pieces of paper. Cover the entire ball in this manner. This is the second layer.
Before applying each layer, do not forget to coat with glue. Cover the ball with a third layer and let dry.
In total you need to apply 12 layers, after every 3 layers leave the ball to dry.
After the 12th layer, leave the ball for a day to dry completely.
Print out the inscription.
Hold the ball by the tail, pop it with a needle and remove it.
Cover the hole with a regular sticker.
Paint the egg, wait until it dries and glue the inscription.
Use a utility knife to make a hole in the back of the egg, place the candy, and close the door with a piece of tape.