Autumn, it's time to pack your bags and fly to warmer climes :)
I already have one! - it turned out more than a scale of 1:12
Dimensions: 9x6x2.5 cm
Material: thin foam board. Covered in genuine leather. Tinted.
Suitcase of average shabby and delightfully smells of coffee :)
I took a picture of the process.
I cut out the shape and pasted the sides - the top is a little narrower
Cut thin strips of leather for beads and stitching
Glued the base and sidewalls on the PVA glue.
The inner fabric was cut out 0.5 mm more than the base - so that it climbed a little bit on the sides with a sticker. I cut out the inner borders from the Whatman paper and pasted it with a cloth.
Glued the inner sides
Now the lid and bottom fit snugly together
I cut out circles from the skin to the size of the corners, divided the circle crosswise and cut one quarter. Glued and "nailed" with golden sewing studs. The extra part of the cloves (from the inside) was bitten off by nippers.
Attached a pen 
I climbed into the hardware deposits and found the castle beautiful - but it is clearly large
I began to think of what to make locks from. Here are the options for locks from suitable parts :) Unnecessary bite! :)))
All this is too big for my suitcase ... I began to think further. I stopped on this version - square loops and buttons. Buttons bit off from the edges.
Glued on super-glue, inserted cloves
Connection of two halves: pasted a piece of skin on the back
Inside, I glued a strip of fabric the same size as the back
Zhelezochka (also a part for jewelry) is purely for beauty, such as the name of the owner :)
And it's time tinting.
Composition of tinting: 1 teaspoon of instant coffee, 1 teaspoon of PVA glue and 1-2 tablespoon of water.
I walked with a brush inside and out, trying not to very much oily :)))
My suitcase is medium shabby and smells of coffee :)
And now from all sides :)
The doll itself is just a toy. That's when she has her own little house with a bed, a TV and a piano, when she can be seated at the doll table and given a tiny iron, then beloved Barbie turns into a fabulous staff with her life and her incredible adventures. In addition, it is a very exciting activity to do things for Monster High dolls with your own hands.
All small things for dolls, accessories do not have to be made from the same material as for people. You just need to turn on imagination and use any materials at hand.
To make a suitcase, we need:
- box;
- two beautiful stickers;
- the cloth;
- black narrow braid;
- openwork braid;
- 4 beads;
- glue, scissors, paper knife.
Work order
We glue the rectangular box about 9x7x3 cm in size completely, tightly, without leaving a lid. Then, gently with a razor or sharp knife, cut it in half along.
- Decorate the top with beautiful stickers. Our suitcase belongs to the girl, so we choose a smart sticker.
- We glue the fabric inside, cut off the excess ends and glue the black braid on the ends (3 sides).
- We bring the two halves closer and connect them into the suitcase with the help of openwork braid.
- Glue black strips and 4 wheel beads on top of the suitcase.
- Glue the Velcro and handle from the same tape. You can decorate the suitcase with rhinestones.
A person without imagination will never guess how to make a school desk for dolls or a deck chair from ordinary old wooden clothespins. But this is very simple.
- Break 12 clothespins.
- Glue 6 halves and 6 more halves (seat and back) to the sides. Glue 4 clothespins in pairs with the flat sides to each other (legs).
- Assemble a deck chair as shown in the photo. First, glue the legs on one side, secure them with the armrest and the crossbar. Then flip over and do the same on the other side.
- The deck chair for the doll is ready.
Designing things for dolls, we plan their life. Good Barbie cannot ride and relax all the time, let her work a little. Let's make an iron for her.
- For the body of the appliance we use a plastic cover from the box from under the juice or milk. You get a white iron. The handle will be the cap part from the ballpoint pen. Our iron will be the latest wireless model.
- We glue the details, complementing with a small red bead-regulator. Pearl nail polish paint the bottom. The result was an iron with a metal base.
An iron can be made from anything: from salt dough, from beer metal cork and even from an eraser.
How to make a TV for a doll
She did a little work, let him watch cartoons. If you wonder how to make a TV for dolls quickly, then you can immediately use matchboxes. This is the finished Sharp puppet. Glue the screen with a splash screen and draw buttons. All. Separately, you can cut a small remote.
Accessories in a toy interior
Barbie must have a piano in the room, and a vase or lamp must be placed on it. But how to make a lamp for dolls? It turns out very simple. To construct a lamp, it is enough to cut the short end of the cocktail tube into 6-8 strips, straighten them, glue a paper lampshade and a bead bulb. Trim the shorter side of the tube shorter and insert it into the cork from the bottle, having previously drilled a hole in it.
Step-by-step master class 2
How to make things for dolls with your own hands, a TV, a suitcase, a piano, an iron / DIY toys, patterns, videos, MK
The doll itself is just a toy. That's when she has her own little house with a bed, a TV and a piano, when she can be seated at the doll table and given a tiny iron, then beloved Barbie turns into a fabulous staff with her life and her incredible adventures. In addition, it is a very exciting activity to do things for Monster High dolls with your own hands. 
Vintage suitcase
All small things for dolls, accessories do not have to be made from the same material as for people. You just need to turn on imagination and use any materials at hand. To make a suitcase, we need:
- box;
- two beautiful stickers;
- the cloth;
- black narrow braid;
- openwork braid;
- 4 beads;
- glue, scissors, paper knife.
The order of work: We glue the rectangular box about 9x7x3 cm in size completely, tightly, without leaving a lid. Then, gently with a razor or sharp knife, cut it in half along. 
A person without imagination will never guess how to make a school desk for dolls or a deck chair from ordinary old wooden clothespins. But this is very simple.
Designing things for dolls, we plan their life. Good Barbie cannot ride and relax all the time, let her work a little. Let's make an iron for her.
An iron can be made from anything: from salt dough, from beer metal cork and even from an eraser. 
How to make a TV for a doll
She did a little work, let him watch cartoons. If you wonder how to make a TV for dolls quickly, then you can immediately use matchboxes. This is the finished Sharp puppet. Glue the screen with a splash screen and draw buttons. All. Separately, you can cut a small remote. 
Accessories in a toy interior
Barbie must have a piano in the room, and a vase or lamp must be placed on it. But how to make a lamp for dolls? It turns out very simple. To construct a lamp, it is enough to cut the short end of the cocktail tube into 6-8 strips, straighten them, glue a paper lampshade and a bead bulb. Trim the shorter side of the tube shorter and insert it into the cork from the bottle, having previously drilled a hole in it. 
Step-by-step master class 2
Comments
Related posts:
How to make a kitchen and dishes for dolls, a toy kitchen, a fridge / DIY toys, patterns, videos, MK How to make do-it-yourself crockery for dolls from various materials. Video / DIY toys, patterns, videos, MK
Such a cute suitcase for dolls can be made with your own hands, this will require quite a bit of material and your patience.Our master class can help you in this matter.
So, you will need: a sheet of cardboard; buckles - 2 pieces; plastic "fimo"; braid and acrylic paints.
To begin with, using our pattern, cut out the shape of the future suitcase on cardboard.
Then, you need to glue it together, you will get a regular parallelogram.
Then this parallelogram needs to be covered with fabric of that color what your suitcase will be. We have yellow.
After that, all the circles must be shaped so that they easily lie on the corner of your suitcase.
From the same plastic you need to make two pens. All these details must now be baked in the oven.
While the corners and handles are baked in the oven, you can continue to design a suitcase for dolls. Glue the ribbon around the perimeter of the side of the parallelogram, which should be the color of the suitcase itself.
The length of these strips should be such that they can completely wrap the suitcase along its height.
Now the parts baked in the oven should have cooled down to be coated with paint in the future. The color of the paint depends only on your imagination.
After the paint has dried, you can start gluing these parts to the doll case. A special glue gun is used for this.
