Origami rabbit made of paper, clear diagrams. How to make a paper rabbit (for beginners). Video master class

A paper rabbit can become Christmas tree decoration, help you tell your child a fairy tale or “star” in a home play. To give the figure some color, you can choose beautiful paper.

You will need

● Paper
● Scissors
● Ruler

Instructions

First, you need to mark a line on the sheet that intersects it diagonally.
The next step is to turn the sheet so that the fold line lies vertically towards you. After this, the sides of the sheet are folded towards the middle line to form a kind of “kite”.
Now the “head” of the kite (that part of it that was not folded towards the center) needs to be bent down along the line between the “head” and “torso” of the kite, that is, bent towards the parts of the sheet folded in the previous paragraph.
Next, we mentally divide the “head” of the kite into two parts with a horizontal line approximately in the middle and bend it in the opposite direction from the “body”.
In place of the former “head” of our future craft we see 3 triangles. One is directed with its top at reverse side from the figure and is located in the middle, and the other two triangles with their vertices look at the figure and are located at the edges. We add them sequentially along the line connecting them with the large triangle.
We turn the resulting figure over.
We see two parts of our figure - the main one and the triangle, which is visually separated from the rest. Ignoring this triangle, fold the figure in half with a horizontal line
Now fold it in half away from you in a vertical line.
Now we have a quadrilateral. If we look at it so that the figure is positioned sideways, we will see that it is divided into three parts - a long triangle, a smaller triangle and a trapezoid. We take the long triangle and pull it up and towards us (the craft is located at two angles towards us) approximately 45 degrees. We got future ears a rabbit.
Cut the triangle that needed to be pulled towards you in the previous step in half from the sharpest angle to the right angle of this triangle.
Fold part of each ear down symmetrically so that the ends of the ears point toward the floor.
Lift the top layer paper on each part that was bent in the previous step, and press it to the figure. You should end up with two triangles with an additional fourth corner at the base in the middle.
Now, without taking into account the fourth corner in the middle, along the line of the base of the triangle, bend the ears back and lightly press the upper half of the ear to the lower one on each side.
All that remains is to color the resulting model as you wish, and the rabbit is ready!

The origami rabbit pattern is available for all ages. Origami rabbit is performed according to the following points

1. Mark the middle line and fold the sides to it.

2. Consistently bend the halves of the upper side towards the central vertical. Let's open and flatten two pockets, turning the outlined lines of the “valley” into “mountains”.

3. Let's check the result - we got two triangles. Picking up one layer of paper, begin to align the long side of each triangle with its apex. Let's open and flatten two pockets from below. The upper edge of the figure bends down.

4. Check the result and turn the figure over.

5. Bend the sides towards the central vertical.

6. The position of the fold line is determined by eye.

7. Open the back of the resulting strip. The fold lines are on the inside. Their position is shown by dots.

8. The fold line extends from the corner and divides the corner in half.

9. Open and flatten the pocket, throwing the lower right part of the figure to the left.

10. Bend the left half of the figure back and rotate the figure.

11. Fold the left side in half, bending the horizontal edge down. Let's repeat the action from behind.

12. Pull out two layers of paper.

13. At the front and back, fold the left vertical edge towards the right edge.

14. On the right we will bend the triangle inwards, and on the left we will perform the technique invented by Neil Elis. This is not an easy action. On the upper right side of the figure are three “ribs”. The first and third ribs must be flattened.

Origami paper figures can not only decorate a room and give the interior a thematic mood, but also be a great way to have fun and usefully spend time. How to make a paper rabbit? There can be a huge number of options for instructions. Some models, the simplest ones, can be made even by beginners.

Cute bunny

cute Easter decoration can become cute bunnies made with your own hands. It is advisable to use special origami paper, but this is not at all necessary. How to make a paper rabbit? If you practice well and carefully follow the instructions, this can take no more than one minute. It is better to start practicing the art of paper folding with the simplest figures that do not require much time and patience.

Necessary materials

To work you will need:

medium weight paper;
coloring materials (markers, paints, colored pencils).

Instructions for Beginners

First you need to decide on a color. This may be an ordinary white bunny, but you can consider more interesting and bright options. You can draw the face and ears both before and after folding. But it is best to apply the toning and background pattern in advance. If paints are used for painting, then the main work should begin only after the base has completely dried. detailed instructions will answer the question of how to make a paper rabbit. So let's get started:

1. Fold square sheet paper in half diagonally to make a triangle.

2. Carefully fold the side of the triangle that previously served as the diagonal for the square.

3. Then we fold the figure in half so that the fold line from the previous step is not visible, and then unfold it back.

4. Take one of the sides of the triangle (the ear) and fold it towards the apex without crossing the fold line from the previous step.

5. Do the same on the other side.

6. Turn the rabbit face up and fold the bottom corner about 2cm inward to make the chin less pointed.

7. Do the same with the upper part of the muzzle.

Ready! So you've learned how to make a paper rabbit, even if it's one of the simplest possible options. You can do everything according to a template, or you can go even further and use scraps of paper, natural materials, fabric, stickers, rhinestones and so on. Let your imagination run wild!

How to make an origami paper rabbit?

The jumping paper rabbit is a variation on the traditional origami jumping frog. This fun project is also fairly easy to make. Thanks to a special folding method, a spring effect is achieved. If you press on the rabbit's back, it will bounce up. Fast and fun, and so much fun for the kids!

What will you need? A sheet of paper, markers, scissors, glue or tape. Detailed instructions will show (origami for beginners):

Take paper or cardboard with dimensions of 6 by 10 cm. To achieve best results the workpieces must have straight sides and square corners. Bunny dimensions may vary. The main thing is to maintain the proportions (3:5). You also need to prepare small pieces paper or cardboard of the same color to make the ears, otherwise the bunny will look more like a frog.
Fold the sheet along the dotted lines as shown in the picture. This will help to make a triangle in which there will be two more triangles.
Then fold the bottom ends of the large triangle towards its apex.
The sides of the rectangle are also folded towards the center.
After that Bottom part rectangle is superimposed on the top of the figure. The reference point for laying the fold is the lower corner of the rhombus.
We cut out two rabbit ears and use glue or tape to attach them to the animal’s head. You can also draw eyes and a nose on the head.
In order for the rabbit to jump, you need to form a Z-shape from the back of the figure, which will act as a spring.
All is ready. Now you can have competitions with your friends to see whose bunny can jump the highest.

A great hobby for the whole family

With paper you can make anything, from cute little animals to original decorative elements. Now you know how to make a paper hare with your own hands (origami). All you need: paper, paints, pencils and a little imagination.

Perhaps a funnier and cuter animal than a rabbit does not exist in nature. These cute creatures are endowed with everything to touch and touch us. And although not everyone can have this fluffy bunny as a pet, you can always make his figurine with your own hands. Such souvenirs will come in handy on the eve of Easter holidays, because, according to legend, it is rabbits who bring sweet treats: chocolate eggs, airy marshmallows, fragrant cupcakes.

We invite you to make a symbolic paper animal with your own hands. We will look at several options for making paper rabbits - from simple to complex, requiring perseverance and skills in working with paper.

Make a bunny with your kids

The following version of a voluminous paper rabbit will be simple and quick to make. Take a standard set for creativity with children:

cardboard and colored paper (it is preferable to use double-sided paper);
glue stick;
scissors;
colored pencils or markers.

Progress:

Cut out 2 wide strips of paper (width 5-6 cm, length of one of them 15 cm, the second 17 cm). The size of our rabbit will depend on the size of the stripes.
We twist the strips into cylinders and fix the edges with glue. Then we glue the cylinders together. A small stapler is also suitable for these purposes. But it is best for an adult to supervise a child’s work with a stapler, as the child may inadvertently injure himself with sharp paper clips or get his finger pinched.
Next, cut out 4 ovals according to the template (2 large and 2 smaller). We cut off the edges of the ovals, forming the tips of the ears. We glue large and small blanks in pairs, bend the edges and glue them on top to the small cylinder.
Draw the nose and eyes. You can use ready-made adhesive eyes.
Glue the cut out legs to the bottom cylinder. To make the paws more stable, it is better to cut them out of cardboard or glue several paper parts together.

Cute bunny is ready! By the way, you can make other different animals using this pattern. It will be enough just to change the shape of the ears and draw different details of the muzzle.

Rabbit pack

Easter colors packed in a funny little bag will bring joy to anyone. Moreover, the implementation of such packaging will not be difficult.

Description of work

We make special markings on thick sheets of white paper.
Using a hole punch, make round holes along the edges.
Bend the shape according to the marked markings. Cut out the details of the ears and paws.
Using a black felt-tip pen or marker, draw a face and paws.
We glue the ears and paws with glue or double-sided tape. We stretch a satin ribbon through the holes.
Before tying a beautiful festive bow for the little bunny, we put inside a painted egg, small candies, and small toy souvenirs.

The surprise for the baby is ready! Joy for the whole day is guaranteed.

Origami

For the younger guys school age You will already be able to understand such a paper folding technique as origami.

The step-by-step progress of work is presented in the diagram:

The result is neat and precise step-by-step execution It will not disappoint either the master himself, or his family and friends, who will be presented with such a lovely souvenir in the future. If you choose white paper for work, then you can then decorate the rabbit’s face. If you choose colored or wrapping paper, the bunny will turn out to be cheerful and playful. In any case, all that remains is to draw the eyes, nose and antennae with a black felt-tip pen.

Having mastered the basics of origami, you can try folding more complex figures. It may be difficult for children to understand the diagrams, so be patient and take a little time to help your child understand the process of putting together their next masterpiece.

The same technique produces funny square bunnies. They are also called “inflatable” due to the fact that after folding, you need to blow lightly into the resulting hole so that the figure comes to life and takes on its 3D shape.

Application

How can you do without a holiday? greeting card for family and friends? And then funny bunnies rush to the rescue! Together with small children, you can make a figured card in the shape of a palm, imitating a rabbit's face.

Such mini-cards will undoubtedly delight grandparents. You should try to catch the fidget, persuade him to put his palm on a sheet of colored paper for a few seconds and manage to very quickly trace the contours. Then, carefully cutting out the imprint, bend your fingers: thumb and little finger forward (paws), bend the middle finger back. Index and ring fingers turn into bunny ears. Most likely, this process will captivate the child, and he will want to decorate the bunny’s face himself or stick on the prepared eyes and nose. Don’t forbid him from doing this - no matter how neatly the craft turns out, in any case, it’s children's creativity and it cannot fail.

With older children, it is suggested to make an applique from a larger number of blanks. You can cut out the parts in advance, or you can invite the young master to do it himself. To make the bunny look voluminous, glue the parts onto the base using foam rubber double-sided adhesive pads. And when the card is ready, it won’t hurt to glue a funny envelope too!

Vytinanka

Decoration festive table This will definitely be your next easy to do craft. It is made using the vytinanka (cutting) technique. Print out the blank diagram on a printer in the amount of 2 copies. Using nail scissors, carefully cut out the figure along the contours and glue it in the marked places with PVA glue. The size of the rabbit depends on the size of the printouts. You can put painted stuff inside easter egg or light a small candle.

Modular origami

To make such little bunnies, you will have to be patient, because first you need to prepare a huge number of module parts. The next step is to assemble the paper hero itself from the blanks. Using not only white, but also colored paper, you can make funny little bunnies - a boy and a girl.

Funny bunnies made from waste material

It turns out that paper rabbits can be made from seemingly unnecessary material. Disposable ones are perfect for work. paper plates, popsicle stick, cocktail straws(for the mustache).

Admit it when the roll runs out toilet paper, we, without even thinking, throw the cardboard tube into the trash. But you can give it a second life. Let's wrap the tube wrapping paper, glue on the ears, paws, nose, eyes. And the paper animal is ready! This craft can be used as a pencil holder.

On the World Wide Web you can find a huge number of options for making paper rabbits. So, get inspired and feel free to start making fun crafts!

Let's try to master the art of origami using this gift paper rabbit as an example. It is assumed that you already know basic origami techniques like reverse folding.

Step 1: Materials

Colored paper
Penknife
Ruler

Step 2: Template

We need to turn it into an A4 sheet and cut the rectangles along the dotted lines. You will need 1 large, 1 medium and 2 small squares.

Step 3: Getting Started

Take a large square and fold it in half. The design must be visible from both sides from the outside.

Step 4: Preparation

We turn the sheet back to the side without the pattern to face us.

We bend the edges as shown in the figure so that 2 hieroglyphs are visible.

Step 5: Corners

We bend all 4 corners to the middle line of the square.

We get 2 triangles on the left and right. We bend them towards the center.

Step 6: U-Turn

Let's unfold it again. Now we need to make not 2 triangles on each side, but 2 rhombuses with identical sides. We hold the sheet with one hand, and with the other we slightly lift and smooth out first 1 triangle from above, then from below. We act similarly on the other side.