Making paper figures by folding is very entertaining and useful for children's development. In addition to perseverance and attentiveness, memory and logical thinking. All these skills will help your child in school, and you can play with a toy made by yourself, paint it, stick it on a postcard, or give it to a friend.

Origami paper cars are more interesting for boys to make, but some girls also don’t mind taking their doll for a ride in a car. All the figures are collected according to patterns, which are subsequently remembered. The following toys can already be made from memory.

A car

The diagram for assembling an origami machine from paper is simple, so beginners or children of primary school age can try making this model.

To work you will need a square sheet thick paper any color. First, it is folded into two equal parts to determine the center fold line. Then each of the halves is further bent in half once and then again. The inner fold of each part of the craft should be on the inside.

Then the workpiece is turned over with the flat side outward and the center line is bent upward. You should get three broken lines or waves: one in the center (large) and two on the sides (small). The entire “accordion” is folded together and the triangles of the corners are folded down.

Then the origami paper machine unfolds as follows. Large triangles form the chamfered edges of the car's cabin. And the small corners are wheels. To make them without sharp corners, the bottom edge is folded upward in a straight line.

By bending the corners of the rectangle of the car body, the desired shape is given with the headlights at the front. After the origami paper machine is made, you can decorate the craft with applique or simply paint it with colored pencils.

How to make a jeep?

From paper different colors You can make a whole car park for a child. You already understand how to make an ordinary passenger car. Now let's look at how to make an origami jeep car out of paper. SUVs have a flatter body surface at the rear. Let's consider what is needed for such work.

It is better to take thick square sheets of paper - 100 g/m2. You need a flat table surface and care when folding the paper. Each fold must be carefully smoothed with your finger so that the work looks neat.

Paper folding pattern

Before making an origami machine out of paper for the game, practice on any single-sided sheet. On detailed and step by step diagram it is clear that the work needs to be done gradually, making folds in the order of the numbers under the pictures. Initially, we bend the square in half in one direction and the other. This is necessary to determine the center and divide the sheet into equal parts. Then the bottom half is folded in half and the edges are folded outward. In this case, the folds are made from the central point of the rectangle to the edges. These will be the wheels of the jeep.

Then the upper half is lowered down and we step back a couple of centimeters from the edge, as in Figure 6, and lift the paper up. Then the edges are bent downward at the corners, forming an even line between the center point and the edges at the corners.

All that remains is to turn the craft over to the other side and the work is finished. Decorate the exterior of the car as you wish. You can start the game.

Every boy loves to play with cars; he will not soon assemble a metal structure on his own, but teaching a child to make paper models is very easy. Parents will need a little time, paper, glue and scissors. You can create such machines using the origami technique or 3D design, for each method there are necessary materials, instructions and recommendations.

How to make a car from waste material?

The older the boy gets, the more interested he will be in complex models, including those made from paper. Parents can only suggest which creativity is more exciting, provide the necessary materials and good mood to complete the task. For boys, among all the models, it is cars that enjoy great prestige, and buying different designs every day will cost parents a pretty penny. After a while, the child will lose all interest in these beautiful cars, so it is more interesting and useful to make the design yourself. It does not require large financial expenditures; all you need is desire and time.

You can create cars not only using ready-made diagrams, but also using improvised means, for example, cardboard and matches, wooden sticks and colored paper. For example, take several cardboard cylinders left after toilet paper, cover each one with colored paper. After the fake has dried, it is necessary to cut a rectangular hole on the surface of the cylinder, leaving a little space on one side so that it can be bent and thus make a seat for the driver.

The design can also be decorated inside using felt-tip pens or a marker; to create a steering wheel, you should cut a circle out of white paper and glue it opposite the seat. The machine can be additionally decorated with applications made of colored paper, choosing different shades. If the car is a racing car, you can put a number on it if ambulance or fire model, then you can also cut out the corresponding signs or draw them. To secure the wheels, use small bolts or plastic bottle caps.

Volumetric 3D paper cars

To complete the work, you need to prepare a printer, a sheet of paper, scissors, cardboard material, as well as glue, colored pencils, paints or felt-tip pens.

The instructions are very simple; you can assemble a paper machine without any special skills or knowledge. First, you need to print out a model of the machine you like on paper, then glue the sheet onto cardboard to make the structure durable. The image is cut out along the contour; this is another advantage of this technique of creating a paper machine.

Important ! All the lines are already marked on the sheet, so it will be easy for the child to fold the model, just bend it along the contour and hide the remaining wings of the workpiece inside.

These white ends must be glued together so that the structure does not fall apart, and if the cardboard is strong enough, then you can use super glue rather than stationery PVA. After that, the most interesting thing for the boy is to decorate the car at his discretion.

A simple way to create a paper car

Paper cars are just as fun to play with as metal or plastic ones, you can arrange real races, and you can also build a garage by decorating all the structures with felt-tip pens, and use a toothpick to make a flag.

To create a paper machine you will need a square piece of paper; it should be folded in half, then the edges should be unfolded and reverse side bend them towards the middle of the sheet. Then, fold the edges again in the opposite direction and fold the sheet of paper in half. Draw the outline of the car onto the material; to do this, fold the top corners, then tuck them inward; two corners will peek out from below. They are also folded inside, after which you need to make wheels for the car.

Bend the lower corners back, rounding them a little, thus creating wheels; in front, to make headlights, the corners must be laid inward. Do the same on the back side of the car; all the details of the vehicle can be drawn, for example, wheels, headlights, doors or the driver behind the wheel. 15 minutes of time and a beautiful paper car is ready.

Origami machine

This is a unique art that involves the creation of unusual paper figures, including cars. To work, you just need to stock up on colored paper and patience, it’s very easy, so you not only can, but also need to involve children, together you can create a whole fleet of cars. Or you can make a car out of a banknote and give it as a gift to a friend.

To create, for example, a sports car, you need to take a rectangular sheet, as a rule, the aspect ratio should be 1:7. The work begins by bending the upper right and left corners, thus creating all the necessary folds. The next step is to fold the top of the sheet, along with the folded corners on the left and right. Small triangles will remain sticking out, which should also be folded towards the middle of the sheet of paper.

Next, you need to fold the sides of the leaf, fold the bottom part, follow the same algorithm that was performed when folding the top part of the paper. All that remains is to fold the structure in half, tuck in the triangles that are peeking out and that’s it, the machine is ready.

A type of decorative and applied art of Japanese origin called “origami” has recently become increasingly popular for its simplicity and elegance of execution. The paper folding technique does not require too much - just have a sheet of paper on hand, instructions and patience.

The wide selection of patterns is also pleasing to the eye, including animals and objects, as well as household items, including cars. Car models and trucks designed specifically for a specific type of activity (fire trucks, ambulances or food transportation) and public transport, airplanes and helicopters.

So how to make your own miniature car using origami?

Step-by-step instructions for beginners

Step #1. We will need an unlimited number of sheets of paper, depending on how many options we want to get as a result. If you have any questions, look at the photo below, which shows each step in detail.

Let's get started: take a sheet of paper and fold it as shown in the picture, after cutting it to a square shape (the size is not important, nor is the color of the paper, but by using different shades, our collection will not look so monochromatic and will look better together).

Step #2. Now we fold the square lengthwise, unfold it and turn it exactly 90°C, after which we repeat the previous procedures and unfold it again, thereby indicating the location of the fold lines, which cannot be avoided. Bottom part We bend it right up to the fold in the middle for future wheels.

Step #3. We pay all attention to the center, where we bend the corners intended for the wheels, which can be seen in the attached picture.

As expected, the wheels are located at the bottom of the figure, but do not forget to cover them with the top of the sheet, hiding the supposed elements of the future car.

Step #4. Where will our car go? Depending on the direction, you should bend the corner just above the fold line in the center of the sheet, but be careful: the folded edge bends towards the middle, but it should not stick out outside the template. Now turn the machine over to the reverse side - and you’re done, you’re unique!

Scheme for folding a racing car

A racing car made in the origami style amazes the mind, which is not surprising - such a figure looks much more realistic, as if it came out of a picture in a specialized magazine, but beginners will have to work hard to overcome this step. Are you ready for a lesson on how to make an origami racing car with your own hands?

Step #1. But unlike the previous master class on folding a passenger car, this scheme involves using not a square part, but absolutely the entire A4 size sheet.

Attention: do not try to fold several figures at the same time to avoid mistakes and inaccuracies during the lesson. But let’s return to the lesson: take our sheet of paper, lay it horizontally and carefully begin to bend it lengthwise.

Step #2. We align the left corner with the bottom of the sheet, after which we lift the upper corner of the resulting triangle upward. Repeat the procedure in relation to the right corner - and unfold. Don't forget to run your fingernail along all the lines so they can be seen as clearly as possible!

Step #3. We bend the triangles on the sides inward and again draw the nail along the formed fold lines. Be careful: the remaining third triangle should remain on top!

We repeat the same for both sides, as shown in the photo - and connect the sides of the central figure at the center so that the corners are hidden under the triangles remaining outside.

Step #4. Let's get to work on the hood of the future racing car: to do this, take the right triangle, the edges of which are slightly less than half folded inward.

Depending on the bend angle, the car model itself will vary. We bend the remaining triangle to the formed hood and tuck it into the newly formed folds.

Step #5. We bend the back of the car at an angle of 90°C, as shown in the picture - and our racing car is ready to cover its first distances and perform maneuvers!

The result is visible to the naked eye, but do not forget that the photo of an origami machine demonstrates how it could be done. Don’t be afraid to show your imagination; it’s enough to change one detail to make the figure sparkle with “new colors” and become unlike anyone else!

Photos of machines using origami technique

Does your child want a new car? You don’t have to immediately run to the store for another toy. Make him a paper craft, or better yet, teach him how to assemble a car so that you can race with friends later.

This activity does not require much time and effort. Any paper will be suitable as materials. In addition, origami:

• will make your fingers obedient;
• will allow you to train attention and memory;
• will develop creative abilities;
• enriches the child’s inner world;
• It will help you calm down.

Choose one of three options and go! You may want to make three models at once.

Volumetric machine

Take a square sheet of any color you like. Fold it in half to mark the center line.

Fold opposite sides of the square towards the resulting center.

Bend half of the pieces in opposite directions.

Turn the workpiece over and bend along the center line. It should look like in the photo.

Place the car sideways in front of you. Mark two symmetrical oblique lines on top and bend the corners along them into the product. The ends of the corners should come out from the bottom. These will be the wheels.

To give the wheel a smooth shape, remove the sharp corners inside. The volumetric machine is ready!

Car on a plane

The second option is perfect for decorating a postcard. The car will look like a real one, which is important for children. And you can do it in five minutes.

On square sheet draw a vertical and horizontal line connecting in the center.

Fold the bottom side towards the center horizontal line.

Bend the sides down, as in the picture.

Point the top of the sheet down and secure it.

Move the upper right corner to the lower area.

Turn the craft over. All that remains is to visually design the car by drawing windows, wheels, and headlights. To prevent the wheels from being triangular, bend the ends down.

Racing car

Finally, the most interesting and exciting things remain. We have to master the technique of performing a racing model and organize competitions with friends on high-speed cars.

Take a rectangular piece of paper. Bend it in half lengthwise.

Mark diagonal lines at both ends and fold.

Now we connect the sides at the center.

We bend the outer sides of one of the triangles towards the center.

We bring the lower triangle with its apex to the center of the machine.

Bend the side wings upward to form a bumper.

For clarity, a diagram is presented. Feel free to use it and everything will work out.

This is what a finished racing car looks like.

If you liked creating with paper, continue your journey into the world of origami on the pages of the site!

Origami is the real art of creating various figures using a regular sheet of paper. From this it would seem simple material you can create whatever your heart desires, including cars. Mothers of little boys can create a real collection of the most beautiful cars themselves. different forms and sizes. Kids will appreciate such toys, and the process of creating them will captivate and interest them for a long time. Such crafts will bring children a lot of joy and at the same time help to significantly save the family budget, so that every time during a shopping trip the child does not ask new toy. Making an origami machine out of paper according to the scheme is quite quick and simple, you just need a little desire and patience.

Racing cars

If earlier various animals, birds and flowers were made from paper, today there are a large number of schemes for creating cars for every taste. These can be flat or three-dimensional figures, very accurate or simply schematic models.

Note. The cars are made from A4 paper, and the process takes only a few minutes.

A very simple diagram of a racing car:

1. Take a sheet of A4 paper and bend it into two even parts longitudinally.

1. On one side of the sheet you need to make a bend at an angle of 45 degrees, walk it well with your hand and bend the paper back. You need to do the same in the other direction and bend the sheet back in the same way so that the lines remain.

1. The same actions are done on the other edge of the paper so that the workpiece looks similar on both sides.

1. After this, one of the sides is taken and brought to the center. To do this, you need to take the edges of the paper in the middle between the folds and bend these two parts. On the other hand, do the same with the paper.

Related article: Bead weaving pattern for the Andromeda necklace

1. The edges of the resulting arrows are raised slightly and the edges of the paper are folded toward the center, dividing each side in half. First one edge is bent, and then the second.

1. When the paper is folded on all sides, the paper is ironed well and after that the arrows are lowered on both sides so that it turns out as shown in the photograph.

1. The blank for the future machine is already ready and now all that remains is to make a few finishing touches. The front part is formed from one side of the paper - one and the second part of the “arrow” is bent inward.

1. The resulting workpiece must be bent in the middle.

1. We bend the workpiece to the end and tuck the arrow into the arrow.

1. The paper car is almost ready, to make it attractive, it is best to bend the back part up to form a spoiler, and from the bent ends of the arrows we form the fender liners of the car.

Such a beautiful and original racing car is sure to please any boy. It is very simple to make, and with the help of paints, markers and pencils you can decorate it the way the child wants. By making several of these cars and painting them in different ways, the kids will be able to create a real and varied collection.

You can understand the technology of creating paper cars with the help of a video that clearly and step by step shows all the steps. You can watch the video to see how to create just such a racing car:

The boys are interested not only in racing and everything connected with it, but also in other car models. Having mastered the simplest and most complex origami techniques, you can create a real and quite diverse collection of cars.

You can also create the following model from a sheet of paper:

Using this simple diagram, you can create various cars, just by slightly adjusting its shape. Trucks and patrol cars, minibuses - all this is done easily and quickly, you just need a little imagination and desire.