Spring is coming and mothers are taking out last season's trousers from their wardrobes, and children are growing so quickly that many things have become short. The question arises - how to lengthen children's trousers?

I suggest ten ways to lengthen trousers and I would like to attach photographs for clarity.

First way lengthen pants this is to sew on a flounce. Measure the circumference of the trouser leg at the bottom and cut out a flounce with an inner circle equal to the length of this trouser leg. It turns out nice and airy.

Second way lengthening the trousers is a gather. Measure the circumference and multiply the resulting length by 2 (2.5 or 3) and cut out a strip of fabric similar in color and texture. Make gathering or counter folds. The length of the strip depends on the frequency and density of the folds. The strip can be sewn into a ring, or you can round the ends and use them to decorate the outer edge of the trouser leg.

Third way lengthen the trousers, combine method one plus method two together. It looks very elegant. Fabrics may differ in texture (lace, cambric, denim, etc.)

Fourth method Lengthening the trousers is a cuff. Cuff trimmed with fur - this method is suitable if there is very little fabric left from sewing, and it is not enough to cut out the cuffs along the entire width of the trouser leg. You can insert fur. You can also sew fur along the very edge of the trouser legs. It looks impressive and new. Plush artificial fur washes well and then combs out with a comb.

Fifth method lengthening the trousers is a ruffle. If you have favorite jeans, but the right one denim not at all, you can sew a large contrasting fabric and make the same belt for the set, a couple of patches and hip jeans are ready. The ruffle can be assembled manually using a thread using a basting stitch and then pulled together to the desired diameter. Or you can stitch on a sewing machine, loosening the tension of the upper thread, and then tighten it too. If you lay two stitches at a distance of 2-3 mm, the ruffle will turn out to be more evenly collected. Then sew it to the trouser legs. My beauty was the most irresistible on the set and even the older girls paid attention and said that it was AWESOME!

Sixth method lengthening the trousers is cutting. Cut the trouser legs below the knees, process the resulting edges with an overcast stitch, then overlap the lace strip and sew on it. The same needs to be done with the bottom of the trousers. The trousers are extended by the width of the lace insert. However, the lace should not be “flimsy”; otherwise, under the weight of the trouser legs, it may move and become deformed. But if you want to insert just such lace, then you can place thin light material under it to strengthen this area.

Seventh method To lengthen the trousers, simply sew on lace at the bottom of the product. I have these trousers too. Many say that they played with lace in a new way and as if they had been like this all along.

Eighth way to lengthen the trousers is a button cuff. Make a cuff, but do not sew it into a ring, but decorate the edge with loops and buttons. You can make an application if your knees are very worn out or a stain has formed there.

Ninth way To lengthen trousers, you need to unscrew the hem at the bottom. This method can also be very simple and will lengthen the trouser legs by approximately 2-3 cm. The edge can be decorated as a hem using braid. In this case, there will be only 0.5 cm inside from the main fabric. Or you can simply go over the edge with an overcast stitch. The only problems appear in the form of ironed stripes from the previous hem. You can put thin ribbons on top of them and stitch along the edges.

Tenth method To lengthen the trouser legs is to turn the hem into a fringed edge and sew on the lace. In this case, the hem of the trouser legs is turned back and the threads are pulled out of the fabric. The bottom is flapping. Be sure to secure the edge of the homemade fringe by laying a fine straight stitch (2-2.5 mm). You can sew lace at the same time while strengthening the edge. It is necessary to pre-process the upper edge of this lace with an overcast stitch.

Bonus: Since I’m showing these trousers to the light of the readers, I’ll tell you about a handicraft called “artistic holes”. The trouser leg is ripped at the crotch seam. Then the place of the artistic hole is marked, the fabric that will look out of the hole is sewn around the perimeter with a small zigzag (it is better for the child if the holes are not through, but still decorative. The possibility of getting caught on a swing, etc. is excluded) Then, within the square, they are made cuts, small square holes and it all comes apart. You can sew more horizontal stripes within this square and cut cuts in them. You can cut out fairly large areas from which the helper fabric will peek out. With each wash, these trousers will only become more creative and shaggy. Good luck making the holes.

A situation often arises: jeans are good for everyone, just add some length! This happens to children and teenagers all the time, and some men or women's pants after washing they become shorter. You should not immediately put the item aside as unusable. Jeans can be lengthened. We'll tell you how to do this at home.

Preliminary stage

You need to prepare for work by checking that you have everything you need. Except sewing machine(if possible - and overlock), when lengthening jeans you will need:

• Needles different sizes and pins for marking and joining materials.
• Matching thread color and quality.
• Scissors.
• Material for marking fabrics - chalk, small piece soap
• Measuring tools: measuring tape, ruler, square.
• Material for lengthening (denim, lace, cotton, etc.) and for processing (trouser tape).

Choosing a way to do the job

You need to think about the option of lengthening your jeans in advance. You can add the necessary centimeters to your pants using another material: in the form of inserts into the main fabric or cuffs. The trousers will become a little longer if you reduce the size of the hem at the bottom of the legs. Each method has its own characteristics.

Basic ways to lengthen jeans

Changing a Hem Seam

The easiest way is to keep the hem to a minimum.

Operating procedure:

• It is necessary to open the seam that secures the hem. The work is done from the wrong side, carefully cutting the threads without damaging the material.
• Threads are removed from the front and back sides of the trousers.
• The lapel is straightened, the fabric is carefully ironed, using steam if necessary, trying to ensure that the mark from the lapel ceases to remain noticeable.
• The new length of the jeans is applied to the fabric with chalk or soap.
• The cut of the material is processed. To do this, you can make a special seam or sew on a trouser braid.
• The processed bottom of the trouser leg is folded to the intended length, and the resized hem is sewn on.

Advice! Cut the threads with scissors small size having sharp ends. Nail scissors are best suited for this.

Important! The braid is not sewn directly to the cut of the trouser leg. It is secured with the same fabric so that about 5 mm remains from the cut of the trousers to the braid.

Insert from another material

The panels lengthen the pants, adding more centimeters than the cuff. This work is more painstaking and requires suitable material. You can use lace or even multi-colored cotton fabric as inserts.

Operating procedure:

• The side seam of the trouser leg is ripped out.
• A line of inserts is outlined on the jeans.

Advice! It is more advisable to make inserts in the lower part of the trouser leg (below the knee), which stretches less in width during use.

• The pant leg is carefully cut to add the insert.
• An insert of the required size is cut from the additional material. The width should match the width of the opened trouser leg.
• The insert is sewn to each part of the leg, below and above the slit. The edges of the seams are processed.
• After ironing the trouser leg, a side seam is sewn.
• The same work is done on the second leg.

Using an insert at the bottom of the trousers, you can not only lengthen them, but also add an additional finishing element to the trousers - a cuff. This will give your usual pants a new look.

The work can be done in several ways.

Method 1 - lace cuff

This option requires minimal action and does not require ripping out existing seams.

Operating procedure:

• The width of the bottom edge of the trouser leg is carefully measured.
• A suitable piece is cut from lace of a suitable height. It must exceed the measured width taking into account the seam allowance (1 - 1.3 cm).
• A side seam is made on the lace fabric.
• The lace is sewn to the bottom of the trouser leg. This work can be done manually. If the length allows, the hem is not ripped off in this case. If necessary, the hem is torn off, the lace is sewn to the denim with a machine seam, and the fabric cut is processed.
• Carefully iron the trouser legs so as not to damage the lace.

Method 2 - fabric cuff

You can also make a cuff from a fabric of suitable color and quality.

Operating procedure:

• The bottom edge of the trouser leg is measured.
• A rectangle is cut out of the selected fabric - the future cuff.

Advice! The cuff pattern should be 2.5 cm wider than the trouser leg (for stitching). The recommended cuff height is 6.5 – 7 cm.

• The hem of the jeans is peeled off, the threads are removed, and the fabric is ironed.
• A side seam is made on the cuff, and the fabric cut is processed.
• The top edge of the cuff is connected to the bottom edge of the pant leg. The work is done first with pins, then a basting seam is made, after fitting - machine stitching and fabric processing.
• At the bottom of the cuff, the fabric is reinforced with interlining or a special edging and a hem is made.
• The trouser leg is ironed, similar actions are performed on the second trouser leg.

Features of lengthening jeans for men

The most suitable lengthening method men's jeans- sewing on a cuff from a different material.

Not many representatives of the stronger sex consider it appropriate to use lace or bright fabric with a floral print, which is acceptable when working with children's trousers. Also, teenagers and young people who want to look unusually stylish at the same time do not refuse such cuffs.

For more reserved men, a companion fabric that matches the quality and texture of the fabric would be more appropriate. The cuff can also be contrasting in color; a cuff made of checkered or striped fabric looks original.

Features of lengthening jeans for women

Representatives of the fairer sex most often choose to work with lace, which transforms their usual jeans. Openwork fabric will suit almost any thing; it is only inappropriate on insulated winter trousers.

Features of lengthening jeans for children

Lengthening jeans for children - good way prolong the use of things that have not yet worn out, remain durable and comfortable. When working with children's things, you can give complete freedom to creativity and imagination. You can transform pants for babies using all available methods: inserts, cuffs, reduced collars. Any bright fabric, floral or polka dot prints are allowed.

Advice! When choosing a material, avoid using knitwear, which does not stretch the same as denim. Be sure to ensure that the cotton fabric you choose is fade-resistant.

The main peculiarity of working with children's jeans is right choice places for inserts. It should not coincide with the pockets, so it is easiest to work along the bottom line of the pants.

Another way to lengthen children's jeans is to change the waistband. It needs to be torn off, straightened and smoothed out. To make the belt larger, the entire denim fabric is made with the right side, and for the back, another part of the same size is cut out. The wrong part is applied from the front side, sewn on the sides and top, and turned inside out. Now the back of the belt has a different look. The new belt is sewn to the trousers, and the cuts are processed.

Jeans are lengthened not only by alterations. You can stretch your trousers to length using water and a soap solution. This method will not add additional centimeters to the pants, but will return them to their original length if the pants “shrink” after washing.

To stretch the fabric we will use a soap solution.

Advice! To achieve results and a gentle effect on denim, it is best to use shampoo for children.

Operating procedure

• A large container (baby bath, bathtub, large, etc.) is filled with warm water and baby shampoo (1 cap) is added.
• Jeans are completely immersed in water and left in it for at least 0.5 hours.
• After this, the pants are taken out of the container and wait a while for the water to drain. There is no need to squeeze!
• Remaining moisture is removed by rolling up the jeans in a large terry towel. The pants are rolled up with a tight roller along the length of the legs, pressing on them so that the water is absorbed into the towel. The procedure is repeated several times, replacing the wet towel with a dry one.
• The remaining wet jeans are laid out freely on dry terry cloth - a sheet or towel. Methodically, carefully, but they stretch the legs. The work is done gradually, along the entire length, starting from the waistline, moving down.
• Having stretched the material as much as possible, proceed to drying. Jeans are dried by hanging vertically.

• Carry out work on lengthening jeans on a clean product, after pre-washing.
• Carefully select materials for inserts, sew them carefully and carefully. Make sure that the new fabric does not tighten the base.
• Experienced craftswomen prefer light fabrics: sewing heavy material to jeans is more difficult.
• It is better to stretch wet jeans that do not have torn parts. Existing tension holes can look untidy and unattractive.
• Be careful when stretching the fabric near appliques, embroidery or rhinestones.

Take your time, be patient and careful - and the result of the work will please you and your loved ones!

I’m no longer used to shortening purchased denim trousers. However, the opposite phenomenon often happens, when the legs at the bottom are missing a few centimeters. Not only women's and men's trousers. More often, such alterations are required for children's jeans, since boys and girls quickly grow in height. The question arises, how to lengthen jeans without compromising their appearance. There is an option - take the item to the studio or try to deal with the problem yourself.

Let's look at the main ways to lengthen jeans at home

Soaking

The method of making jeans longer without sewing is suitable for those who do not have a sewing machine or do not want to once again touch a tailor's tool. H To decide how to lengthen short jeans, you need to wash them first.

To give the required length, use water and a soap solution. You just need to use the existing algorithm. What you will need:

• shampoo for children;
• spacious container (bathtub, spacious basin, bucket);
• terry towel (more than one) or sheet.

Fill your home reservoir with warm (not hot!) water, add 1 cap of shampoo and mix lightly. Immerse washed and dried jeans completely in the solution and leave for at least 30 minutes. After the time has passed, pull the pants out of the container, wait until the water drains, but do not twist them.

When the water has finished draining, wrap the jeans in a terry bath towel so that a tight roll is formed along the length of the legs. In this case, you need to press on them to absorb water into the towel. As soon as it becomes damp, you need to replace the wet towel with a dry one and repeat the procedure. And so on several times.

After making sure that the new towel no longer absorbs liquid, place the still damp jeans unfolded on a dry terry sheet. When laying out denim trousers, stretch the legs along the entire length using gentle, gradual movements from the waist down.

After making sure that the maximum elongation of the material has been achieved, hang the jeans on a rope for final drying. Shampoo for children has a delicate and gentle effect on denim and does not allow denim to fade.

With finishing

Pants can be made longer using trim. This is especially true if you are wondering how to lengthen Women jeans. For this we use:

• lace or lace ribbon;
• bright stripes of plain, printed fabric in checkered, striped, floral or polka dot patterns;
• wide braid;
• fringe;
• frill.

It’s easy to choose a trim to match the denim or contrast it to add “length” to the legs, turning the pants into eye-catching and stylish ones. Moreover, the first 3 types of finishing can be used at the bottom when the jeans are hemmed at the factory, but then the seam turns out to be thick. Connecting the finishing strip to the embroidered hem of the trouser hem allows for a neat seam to be achieved. In addition to the fringe and frill, the rest of the trim is also inserted into the legs in the area where they are cut below or above the knee. The method is suitable for those who are wondering how to lengthen children's jeans for a girl. However, it is important that the width of the trim matches the width of the trouser leg.

Use small scissors with sharp ends to get rid of the threads used to hem the hem. Otherwise, the jointing will end with unplanned holes.

Edge Length Adjustment

The method will lengthen the jeans by using hem fabric. This way it is possible to make the trouser legs longer by a maximum of 2.5 cm. The work is carried out on washed and dried trousers. It is permissible to rip the hem before washing the trousers or after this process. The threads from the seam are carefully removed. The whole process consists of the following steps:

• dampen the bottom of the trousers and iron them so as to make the fold invisible;
• cut out 2 ribbons 4 cm wide along the transverse thread of fabric;
• align the elements with their upper sides, place a long piece of tape on the bottom of the trouser leg, and stitch after basting. Fold back and iron the seam;
• unscrew the sewn tape, as with the usual processing of the bottom of the item. Baste the formed hem and sew it by hand so that the seam is not visible from the outside of the product.

Adding fabric to the cuffs

Lengthening with cuffs – the best option to solve the problem of how to lengthen the bottom of men's jeans and trousers for boys. This method allows you to make cuffs of different acceptable widths. For this part, a fabric similar to the material used to make the item is suitable. Printed fabric is used to lengthen the jeans of teenagers or young people who prefer to stand out from others.

To the measured circumference of the bottom of the trouser leg, add 2 cm for the seams and calculate the length of the cuff (usually 5-6 cm), then duplicate the element with non-woven fabric. Having sewed one section of the part to the wrong side of the trouser leg, make an edging stitch along the cuff. Iron the second edge 0.5-1 cm, place it on the face of the base material, and stitch it. Finish with heat treatment.

When selecting material for extension, you should exclude the use of knitwear. It doesn't stretch the same as denim. Also, fabric that fades is not suitable for work.

• jeans must be washed and ironed before work;
• if the lengthening occurs with unstitching the factory hem of the bottom of the trouser legs and wetting them, the pants are ironed until the visibility of the fold line disappears;
• One cannot ignore the basting of details to lengthen the fabric of jeans in order to avoid wrinkles at the junction of fabrics for elements and denim of trousers;
• if the machine cannot cope with the stitching at the seam joints due to the thickness of the material, the extension should be done manually;
• the color of the thread for external seams should match the color of the fabric used;
• It is necessary to start lengthening after trying on trousers with shoes to create an image. This will help you choose a new pants length.

The result of lengthening jeans will please those who need patience and accuracy. The quality of work should be at its best, then you won’t be ashamed to appear in front of others in new or old jeans.

Video

If your favorite jeans are too small for you, don’t rush to throw them away. It’s not difficult to make a truly designer item out of them. The main thing is to show your imagination. And if the difference in size is small, then you can simply enlarge the jeans without significantly changing their familiar and dear appearance.

You will need:
- fabric for insertion (contrasting denim, faux leather or suede, brocade, thick corduroy)
- a piece of denim fabric in the same tone or a similar shade;
- threads to match the finishing threads on the jeans;
- working threads to match the color of the jeans;
- sewing machine.

Instructions:
1. Tear off the branded label from the jeans above the back right pocket. Undo the belt. Cut the three back loops from the waistband. Steam very carefully, without disturbing the integrity of the fabric.

2. Spread side seams pants In classic jeans models, the inseam is made flat, and the side seams are sewn in the usual way, so it will not be difficult to rip them.

3. From additional fabric, cut out a strip 2.5-3 cm wide. Of this width, 0.5 cm on each side will be used for allowances. The length of the part is equal to the length of the trouser legs.

4. Sew the cut piece along the long side to the back of the jeans using a backstitch. The threads for the hemming seam must exactly match the color of the main finishing stitches on the jeans. If you couldn't choose the color of the thread, use a regular stitch.

5. Turn the jeans inside out and sew the other long side of the panel to the front of the legs. Use a topstitch stitch for this.

6. In classic jeans, the front pockets are usually decorated with branded rivets. The rivets found on jeans near the side seam are located very close to the edge of the fabric and will prevent the sewing machine foot from moving smoothly. Therefore, make a small gap in the machine seam in the area of ​​​​the side rivets, and then stitch this area by hand.

7. Turn the jeans right side out. Now each pant leg has become wider by 1.5-2 cm.

8. Cut the belt crosswise in the place where the company label was sewn onto it. This is where you will insert denim to increase the length of the waistband.

9. Cut out a piece of denim fabric of the required length so that the waistband matches the new width of the jeans. Baste it to your jeans. Do a fitting.

10. Sew the insert onto sewing machine. Smooth out. Try the belt around your waist and mark for the back loops. Since the length of the belt has changed, the location of these parts will also change. Sew the top ends of the belt loops to the top edge of the waistband.

11. Sew the waistband to the jeans. Sew the bottom ends of the belt loops. Hide the insert on the belt under the branded label. Sew it on by hand, imitating a machine stitch with a back stitch. Try to stick the needle exactly into the old puncture sites.

Helpful advice:
If your jeans don't have a branding label to hide the waistband panel, cut a new waistband from the same fabric you used to line the legs. Leave the old belt loops. You will have to alter all five pieces. Treat the rivets on the front of the jeans in the same way as on the sides.

How to stretch jeans?

Jeans are present in the wardrobe of almost every person - women and men, children and elderly people. Therefore, anyway or later, they face the problem of denim shrinkage.

The easiest and most affordable way to stretch jeans at home is to wet them with water, then put them on and wear them a little while wet. The result of this method is visible almost immediately - the jeans stretch quickly and effectively. You can wet the entire product or a specific part of it that most needs it with water.

Like any other clothing, putting on wet jeans is very difficult. You can make your task easier in the following way: pull the dry item over yourself, and only then thoroughly spray it with water from a spray bottle. Particular attention should be paid to those places where the jeans are especially tight. It is best to use warm water for these purposes. To stretch out tight jeans faster, you can try squats, do a few bends in different directions, or just turn on your favorite music and dance. The main thing is not to sit in one place.

It is important to remember that this method of stretching jeans is effective only for those products whose material composition includes cotton, denim and a certain percentage of elastane. If the material contains synthetic fibers, then dealing with the problem of tight jeans will be much more difficult.

Well, if the denim shrinks in width, you can stretch the jeans and wear them again as before, but if they have decreased in length, they can only be increased by increasing the fabric. By the way, this is precisely the property of jeans good quality differs from low-grade material - expensive material shrinks only by width.

Almost all jeans shrink because they are first boiled and after contact with all kinds of chemicals For washing and rinsing, the fabric shrinks. And the more cotton there is in jeans, the more it can shrink in size.

How to properly stretch jeans?
The first step is to wash them in water no higher than 40°C, and if you plan to stretch them, then in cool water. Do not soak the fabric, wash as quickly as possible and without particularly intensive products. Do not machine wash your jeans as it will shrink the fabric too much.

After the jeans have dried slightly, lay them out on the ironing board, place gauze on top and begin steaming and drying them with an iron, stretching the desired areas as much as possible.
Denim fabric under the influence of steam will soften and take the desired shape and size, and under the influence of temperature the desired result will be fixed.
After ironing this way, the pants will become easier to put on.


If you have problems in some areas, such as the stomach, put on your jeans lying down, button them, stand up and squat several times, the jeans will take the desired shape.
Gradually, over time, the fabric will become softer and more manageable.

How to stretch jeans in the waistband?

One day you put on your favorite jeans, but they don’t fit at the waist. You may have chosen the wrong size for a new item, but you don’t need to immediately put the item in the closet and go to the store to buy new trousers. Use a few simple secrets.

You will need:
Tight waist belt
Warm water
Chair or hangers
Extension button
Fabric for stripes
Iron
Clothespins

Instructions:

1. Choose the appropriate method for stretching your jeans. Perhaps it's not the extra pounds you've gained, but the laundry. When worn, denim products stretch, and after washing they shrink approximately the same size. Try pulling on shrunken jeans while lying down, buttoning them tightly and breaking them in. You can put a tight-fitting belt in the form of a thick elastic band (for example, a special orthopedic one) on your lower back. This provides additional intense stretching for the jeans and protects your body from strong friction.

2. Use warm water to stretch the waistband of your jeans. Wet the belt in a bowl of warm water or spray it with a spray bottle. Wear jeans. If they have not stretched, moisten them completely with water and pull them onto some kind of spacer: the back of a chair, hangers. Wait until the pants are completely dry, or speed up the process by drying the waistband area with a hot iron. Usually, in this way it is possible to stretch the waistband of jeans by 1-3 cm. Jeans that were made using elastic fiber increase in size especially well.

3. Try attaching a practical device to the waistband of your jeans to lengthen your trousers at the waist - a button with an elastic loop. You can make it yourself or purchase it from an online store. Elastic loop you attach it to the original button of your jeans and fasten your pants with a large extension button. This way you can gain a few centimeters. You will have to wear jeans with a shirt or blouse on top.

4. Change your jeans if all of the above methods do not suit you. Carefully open the side seams and make wedge-shaped stripes. Leather inserts look good; You can also interestingly combine fabrics of a suitable texture. Try to veil the dilator wedges interesting applique or embroidery. If you doubt your skill and are afraid of ruining a good thing, have your jeans widened in the waistband by a professional seamstress.

How to stretch jeans?

You bought jeans without trying them on, but at home you found them to be a little tight. To increase them, you can use home methods, which many people use in such cases.

Instructions:

1. Wet jeans in lukewarm water and wring out. Pull the seams well in all directions and hang them to dry a little. During the drying process, remove them from the rope several times and stretch them thoroughly in all directions.

2. The second method also involves soaking the trousers. After removing from the water, wring it out and let the water drain well, leaving the pants in the bathroom. Then take it out to the balcony and hang it to dry a little. Put on your still wet jeans and walk around the room in them for about twenty minutes. This way they will take the shape of your body. Then remove and let them dry completely.

3. If this option does not help, dip the jeans in water again, wring out and dry slightly. Then put on warm tights, sweatpants or other old trousers. Pull wet jeans over top. It will be very uncomfortable, but try to walk around the apartment like this for at least an hour. You can even jump, do bends and squats. Additionally, pull the belt back with your hands if it is too narrow. Then take it all off and hang it up to dry. After such torment, your jeans will definitely increase by one size.

4. If your pants are a little short, then the surest way to make them longer is to stretch them out. But here you will need an assistant. Take wet pants together. Let one hold it by the belt, the other by the bottom. Try to pull them in opposite directions as much as possible. During drying, repeat this procedure several times.

5. You can also try steaming your jeans with an iron, which will increase their size slightly. Turn the pants inside out and lay them out on the ironing board. Heat the iron, turn on the steamer and iron, while simultaneously pulling with your hands in the direction of increase. You can also wet a linen napkin, apply it to your pants and iron it on top. After ironing, put on your jeans and walk around the room until they take on the desired shape.

Helpful advice
Never dry denim trousers in an automatic dryer to prevent them from shrinking too much. Let the washed pants dry at room temperature, hanging them from the waistband using clothespins. Use the option of drying yourself as a last resort, because... This not only risks catching a cold, but can also ruin the shape of the product by stretching it out on your knees.

Jeans have held a strong position at the top of fashion for many years. Every fashionista in her wardrobe has at least one ideal pair of jeans in the right shade, size and model, highlighting all your strengths and weaknesses. Therefore, it is doubly offensive when they shrink during washing, the bottom of the trouser legs frays and spoils appearance. And young mothers know very well that children grow faster than we can update their wardrobe. And we have a logical question: how to lengthen short jeans? Some interesting ways You will find solutions to a similar problem in this review.

How to lengthen short jeans?

Nowadays, jeans have become not just fashionable clothing, but a way of life, a symbol of youth and creativity. We wear them to work, we wear them when we go for a walk with the children. And when traveling, they are simply irreplaceable, because they are strong, do not stain, do not wrinkle and, in general, make us stylish. Therefore, we want to offer several ways to lengthen short jeans. First, arm yourself with patience, good mood and fantasy. The process ahead will be painstaking, but interesting.

To work you will need:

1. Scissors.
2. Blade.
3. Threads to match the fabric.
4. Decoration Materials.

Method 1

Jeans must be washed and ironed. Look at how they are folded - they usually use a hem stitch with a closed cut. In this case, we have an additional 3-4 cm after ripping, which may be enough to lengthen the jeans.

How to proceed:

1. Using scissors or a razor blade, carefully open the seam from the inside.
2. Remove thread scraps.
3. Smooth the seam with an iron and steamer; if this is not available, then use a wet cloth.
4. You need to iron first from the wrong side, and then from the front.
5. From denim, cut out strips of the width you need for lengthening.
6. Place right sides together with the legs, mark, then stitch using a sewing machine.
7. Fold back the fabric and iron the seam well.
8. Fold the bottom of the strip and hem it by machine or by hand.

Important! If you get so carried away by the process that you want to change not only the length of your pants, take advantage of our master classes to...

Method 2

To lengthen your jeans by 2-3 cm, you will need a hem tape - it is sold in any sewing department:

1. Place the tape on the bottom of the galoshes, aligning the edges.
2. Sew, retreating from the edge of the product 2-3 mm.
3. Fold inward and iron.
4. Sew again or make a blind seam by hand.
5. Steam the finished work using an iron (wet cloth) from the front side.

Method 3

You can correct the length of denim trousers using fabric of a suitable texture, imitating cuffs or cuffs. It can be similar in color, or, on the contrary, it can be contrasting due to color and pattern. This option is good for children's clothing.

Sequence of work:

1. Cut out a strip of the desired width and fold it right side together with the jeans.
2. Mark and stitch.
3. Unfold the strip and press the seam.
4. On the front side, you can lay a finishing stitch using tone-on-tone or contrasting threads.
5. From the same fabric, to maintain an aesthetic appearance, you can make trim on the belt (patas), on the pockets - a stripe or applique.

Method 4

The next saving option is suitable for lengthening and decorating jeans in the “boho chic” style for little and adult girls. Lace, silk and nylon ribbons, fringe from different materials, braid with ethnic patterns. Make ruffles from wide, non-knitted lace or ribbon. Hem to the bottom of the trouser legs or topstitch.

If you need to lengthen your jeans significantly, sew narrow braid and lace in rows onto any similar fabric. Then sew to the galoshes, as in the previous methods. A crocheted knit will look very interesting, especially if you wear an openwork sweater crochet, or complement your look with a bag made using the same technique.

Important! If your pants are designed for relaxing and walking in summer season, try to make them more fashionable. Click on the link to the article where you will find detailed instructions, .