Face contouring at home step by step. Drawing a contour on a fabric

A wide palette of contours for Decola fabric, which includes the main colors, colors with sparkles, pearlescent and metallic shades, provides unlimited possibilities for creative experiments.

How to use the circuit? What you need to know when applying images to textiles? How to fix the finished picture? We have prepared answers to these and other common questions about working with fabric contours.

1. To create a neat picture, it is very important to choose a contour with a convenient nose. Decola decorative contours are equipped with a removable cone-shaped nozzle with a long thin nose, which allows you to create elegant lines and small dots.

- If the fabric is thin enough, then place a sketch under the material and circle with a pencil;

- You can put carbon paper on the fabric, and then draw the pattern and draw with a pencil or a needle to make small holes along the outline of the pattern, make marks with a pencil through them, and then connect the points with a line.

3. Before using the circuit directly on the product, it is recommended to practice on a fabric sample. This advice is especially relevant when working with synthetics, as you need to make sure that the picture is firmly fixed.

4. The basic rule for beginners is not to be afraid to draw a contour, otherwise the hand will tremble and the lines will be uneven and broken.

5. Hold the contour approximately at an angle of 30 degrees relative to the surface to be decorated. If you keep it at a right angle, this will prevent the outflow of paint from the hole. The nose of the tube should be kept above the surface, and not close to it, then the paint from the contour will flow out evenly.

6. When applying the contour, it is advisable to evenly press on the tube so that the line is the same thickness. It is very important that at this moment the hand rests on the table, and does not hang in the air, because this way the movements will be much more confident, and therefore more accurate.

7. The painting created using the contours must be dried for 3 hours before applying acrylic paints on Decola fabric. Also, contours can be applied to decorate the finished painting.

8. After applying the contour to the product, the finished painting must be dried for 24 hours in a horizontal position. Next, the pattern should be fixed with a hot iron without steam, ironing the product through the cotton fabric from the wrong side for 5 minutes. To fix the painting on leather products, it is recommended to use a hairdryer or Decola acrylic varnish.

9. When drawing on large surfaces, a contour with a larger nose is often needed. To obtain the required diameter, you can simply cut the nose with a sharp clerical knife at a right angle. If you prepare several nozzles with different diameters, then you can use them on the same path, getting lines and points of different sizes.

10. Often after several months of storage, the open circuit is difficult to squeeze out of the tube. In this case, clean the spout with a needle. For convenience, it is recommended to clean the spout after each use.

Face contouring is an impressive make-up technique that helps make-up artists achieve their perfect face shape. Face contouring, also called face sculpting or contouring, is the latest makeup trend at home. Now, looking at the perfect movie stars, know that you yourself can achieve the same result. To do this, you just need to determine the shape of your face and use our guide.

It is through contouring that you can achieve the perfect shape of your face. Further in our article we will tell you how to properly apply a contour to the face. This is the perfect interactive guide of its kind.

Proper face contouring: a real guide for your form

Contouring technologies help make the face more sophisticated and hide flaws. Many girls can be intimidated by the contouring procedure. Since, perhaps, they think that only professional makeup artists can do this. However, just a few simple steps allow you to perform facial contouring at home. The main condition is to choose the right tools for contouring.

Face contouring is achieved with a beveled brush, bronzer, highlighter and blush. But the most important step in contouring is choosing the right skin tone for your face. This is necessary so that face contouring does not look like a "mask". And the best way to determine your tone is through trial and error. The next step is to determine what type your face shape is. We suggest considering six types of face shapes.

If you have a heart-shaped face, this can characterize you as a very caring and expressive person who sees the world differently. Such a person is able to give the last shirt to the needy, can patiently listen to his neighbor and a bit to others. And not surprisingly, this face shape resembles a heart shape. Famous heart-shaped celebrities are Jennifer Love Hewitt, Reese Witherspoon and Keri Mulligan.

Bronzer. Cheeks are distinguished in the heart-shaped face. Therefore, do not over-expose the angle of the cheeks so that the face does not seem too pointed. Begin your cheek line from about the middle of your ear. The rule "less is more" is appropriate when you highlight the cheeks on the face of a heart-shaped form.

Since the upper part of the face looks larger than the chin with a heart-shaped form, it is worth aligning the general appearance of the face, darkening the whiskey with bronzer. Keep a balance between your temples and cheekbones.

Avoid adding any dark contour lines to the lower jaw. The heart-shaped shape of the face is already angular, so any dark outline will only accentuate the shape of the corner and shift the balance of the face.

Extend your nose by also applying a darker bronzer on its sides to soften the angular shape and give a sophisticated appearance to your image. By darkening a small area under the tip of the nose, you will make it slightly snub-nosed. It all depends on how much you want to change your initial nose shape.

Advice! When contouring your face, follow the rules of artists. When applying highlighter and bronzer, act “from light to dark!”

Highlighter highlight the line of the nose, the area under the eyes, the chin. And on the forehead, use with caution so as not to weight the upper part of the face.

Blush apply over the bronzer line on the cheeks, keeping oblong lines with an inclination to the chin. This will add symmetry and preserve the natural curves of the face.

The square shape of the face characterizes you as an actor. You are ready for anything to get the most out of life. The hard lines of your face give you a confident, piercing look, but at the same time, you can be overly naive. This is the type of woman who wears red lipstick, a hot pink manicure and can skip a beer with the guys during the game. This set of qualities is one of a kind, which defines in you many aspects of femininity. Famous square-shaped faces are Olivia Wilde, and Demi Moore.

Bronzer. The main purpose of contouring a square face is to soften the lines of the chin, darkening the harder lines. So you can bring unwanted angularities into the shadow, and the desired parts of the face highlighted by highlighter come to the fore.

Apply the darkest color on the temples and along the hairline on the forehead. This will soften the square shape of your face and give it a more rounded appearance with focus in the middle of the forehead. Contouring the nose will help smooth it out and lengthen a little. However, do not darken the chin, otherwise the face will look unnaturally spiky. On the cheekbones, make short light lines starting at the mid-ear point.

Highlighter highlight the forehead, areas under the eyes and chin. This will make your look visually clearer. It is worth considering that for a square face shape, the minimum amount of highlighter is used. Therefore, highlight areas of the face should be with extreme caution in order to maintain naturalness.

Blushapply a rounded shape from the edge of the cheekbone and down to the intersection with the center point of the eye. Such a smooth blush will round your face and soften the square shape, while maintaining balance.

If you have an oval face shape, then this suggests that you are rare. Since the oval face is considered stylistically universal. People with such a face shape combine courage and calm in their facial expressions, which cause confidence and self-confidence in other people. At the same time, when your face tells everyone about your loyalty, you are an incredibly mischievous person. You probably love to have fun and fool around, for example, play hide and seek in a department store. People with an oval face are always young in soul. Famous celebrities with oval faces are Jessica Alba, Beyonce and Jennifer Lopez.

Bronzer. Since your face already has one of the most balanced forms, the contours of it should be focused on the foreground. The purpose of contouring an oval-shaped face is to reduce individual features instead of a complete plan. People with an oval face tend to have more prominent noses. So, the contouring of the nose with great emphasis on its sides will compensate for these functions. To make your nose look shorter, select only half of the nose bridge.

When darkening the cheekbones, avoid lengthening the face. Try to draw your line, starting just above the corners of your mouth, making a triangle. So you visually divide the face and avoid the "horse" effect.

Highlighter. Applying a highlighter line over the lip and on the chin will expand your face to make it more symmetrical in shape. Be economical with highlighting the upper lip, but outline the chin area with a flat white hatch to maximize shape. Forehead highlighting will help you balance your chin, just try to avoid too much shine on it.

TIP! Choose a highlighter one or two tones lighter than your base, and a bronzer one or two tones darker.

Blush apply with short and sharp movements, starting from the wings of the nose to the sides to the upper point of the ear. Such a blush will look very natural.

If you have a triangular face shape, then this means that you are an incredibly intuitive person. Such people are very sensitive and can quickly find solutions. They are strong, independent and unique. Famous celebrities with triangular shapes - Ashley Greene, Scarlett Johansson and Holly Berry.

Bronzer. Since the chin is the narrowest part of the face with this shape, it is necessary to apply as much dark shading as possible. So the chin will merge with the general background of the face. Triangular face contouring requires a balance of all parts of the face.

Darken the outline of the line near the hair to reduce the width of the forehead and achieve greater symmetry. All lines of the bronzer should be soft in order to maintain balance on the face. Also, do not put your eyes too far. With a triangular shape of the face, as a rule, the eyes so come to the fore. Let your other features be visible.

Highlighter. Avoid highlighting your nose. Highlight the areas under the eyes and continue this line under the nose. This will slightly shorten it and maintain balance. Highlight the forehead above the eyebrows and chin.

Blush. To give your face a beautiful light blush, apply blush in the form of the most straight lines to the nose. With more straight flush lines, you can add a sense of balance to your face. The main thing is that these lines do not repeat your triangle, so as not to overload the face.

If you have an elongated shape of the face, then this suggests that you are easy to relate to life. You are cheerful and this playful nature attracts other people to you. You illustrate calm, even when you do not feel it. Famous celebrities with elongated faces are Sarah Jessica Parker, Sandra Bullock and Kim Kardashian.

Bronzer. The trick with this face shape is to reduce its appearance. When contouring, the lower part of the chin should be darkened to reduce its length. Then apply a dark border around the contour of the hair line from temple to temple. This will slightly expand the face than balance it.

Highlight your eyes so that they attract all the attention to yourself and divert your gaze from your chin and forehead. Select the cheekbones with a little horizontal lines. Darken the nose only to half of the nose, so as not to lengthen it.

Highlighter.Try not to overexpose your face too. Highlighter point only the area under the eyes, lightly touch the nose and the space between the eyebrows. On the chin, carefully stretch the highlighter with the light line under the lip in width to visually expand and shorten the chin.

IMPORTANT! Remember, excessive use of a highlighter will only lengthen your face even more. But the right accents help balance it.

With the round shape of the face, there is a certain airiness and charm in you, and those around you would really like to know where you got so much energy from. Chubby girls have the inherent property of stopping the views of passers-by. Such girls do not stay long alone. Many consider it important for them to get to know you. Famous chubby celebrities are Kirsten Dunst, Diana Argon and Kate Upton.

Round face contouring

Bronzer. Another form in which facial contouring requires the use of most of the bronzer to darken. This procedure helps to show a clearer structure of the soft face. Darken your cheeks on the sides, creating the effect of narrowing the shape of the face, without touching the forehead and chin.

Highlighter. Exactly, as on the ruler, highlight the nose bridge, starting from the middle of the forehead, to draw attention to the center of the face. Also highlight the top of your cheeks and make a triangle on the chin. Proper contouring of a round face helps to lengthen it and create a soulful, balanced and more aesthetic look.

Blush. Do not forget that a round face has the same round cheeks. Therefore, highlighting them, observe the angularity of the form. Here you should use blush very sparingly so as not to overdo it. Highlight your cheeks, just above the cheekbones in the form of a drop, where its wide part is closer to the nose. However, depending on your personality, you may even refrain from using blush.

As you can see, a high-quality contouring of the face helps to change the appearance, emphasizing the advantages and taking its defects into the shadows.

Cosmetics can work wonders! Every day, millions of girls around the world apply a variety of decorative products and become participants in a delightful transformation. Most often, makeup is used to mask flaws and emphasize virtues. In the process of development of the beauty industry, new techniques have appeared that have allowed not only to improve the natural beauty, but also to change the natural forms! So, after making some successful strokes, you can visually reduce the nose, highlight the cheekbones and hide the cheeks.

Contouring is a technique of applying cosmetics in different shades to give contours a bump. The main principle of sculpting is the play of light and shadow. Vivid tones, when meeting with dark ones, can visually change the shape of the chin, eyes, lips and other parts. Initially, this method was used by make-up artists in the theater. Actresses had to look perfect so that the viewer noticed them from anywhere in the hall. Over time, the make-up specialists mastered the technique and used it in preparation for photo shoots or fashion shows. In 2010, the notorious diva Kim Kardashian literally opened sculpting for ordinary girls. Since then, contouring has gradually become part of the everyday makeup of many girls.

Preparing for the correct face contouring for beginners (photo)

Even if you are painted with the most technical make-up artist in the world, you won’t get anything good without preparatory actions. In order for the base to lie flat on the skin, you need to take good care of it.

Cleansing. Use foam, special oil, or lotion to rinse off any old cosmetics. Even if you have not already made up, this item still should not be ignored. A cleanser will help remove excess sebum and impurities.
Toning. Immediately after washing, wipe the skin using a cotton pad moistened with tonic. This will make the skin fresher and prepare it for further action.
Moisturizing. Whatever the dermis: oily, dry or normal, it needs moisture anyway. For health, the fluid that enters the body is not always enough. That is why after the toning step it is necessary to apply a moisturizer.
Toning. After carrying out a full range of mandatory leaving procedures, you can start makeup. Apply a primer or base: this way the makeup will last longer. After that, use any tonal foundation that is convenient for you. You can also use bb cream or powder. It is important that the product is suitable for the type of dermis and combined with other cosmetics.

Textures

To understand them, it is important to have an idea of \u200b\u200ball the products that make-up is done. There are several types of correctors.

Dry

They are somewhat reminiscent of eye shadow. In the manufacture of such cosmetics, the pigment and minerals are interconnected under the influence of a press. Friable means for contouring give a very natural effect due to the fact that they lie in a fairly thin weightless layer. It is most convenient to apply them with special brushes. If not, you can use the fingertips.

Cream

Such correctors have a very dense texture. They hold well, but they must be carefully shaded. If the product distribution is not good enough, not shadows, but very inappropriate coarse stripes may result. It is best to distribute with a sponge or hard brush.

Liquid

They are similar to tonal creams. To understand how to properly contour the face in this way, it is only important to remember the mechanics of applying the tonal. You simply squeeze a little liquid onto the sponge or dense brush, and then distribute it. The result is a natural and lasting effect.

Friable

This is a professional version of cosmetics. Such a corrective product is a simple pigmented powder, not mixed with additional binders. This texture allows the makeup artist to independently determine the degree of saturation of the application.

Sculpting tools

They are selected depending on the purpose of makeup and the structure of the means by which it is performed.

Bevel brush

It is ideal for using a dry or loose bronzer. Usually it is applied blush, but it is also suitable for darkening the area of \u200b\u200bthe cheekbones. It is convenient to distribute the cream on the skin and naturally blend it.

Sponge

A porous “egg” appeared on the cosmetic market not so long ago, but quickly managed to win the hearts of all the girls. It helps to evenly distribute the tone. Also, with the help of a sponge and gel or liquid proofreaders, you can do amazing sculpting. The contents of the jars can be either “driven in” with patting movements, or simply smeared.

Kabuki

This is a very thick and dense brush. To understand how to properly apply the liquid to contour the face, applying it, a lot of mind is not necessary. Kabuki well takes on both dry and creamy textures. A straight cut allows you to draw sharp lines and at the same time shade so that they are not visible from the side. The pigment taken on the brush is most conveniently applied by driving.

Fan brush

The villi of this instrument form a fairly wide area. This allows you to paint as accurately and naturally as possible. With a “fan” it is convenient to contour the forehead, cheekbones, areas under the eyebrows, as well as the clavicle and chest (if necessary).

Silicone sponge

In its form, it resembles a petal. This beauty product does not absorb cosmetic product and allows you to fully use it. The sponge can be twisted or bent in order to draw contours of a certain width.

Small flat brush

Step-by-step photo tutorial on face contouring for beginners will tell you how to apply cream from a palette with this tool. We recommend focusing on small details: the corners of the eyes, the tip of the nose and the bow of the upper lip. This is most conveniently done with small brushes. They are also suitable for using shadows.

Skull Contouring

The main point, the same for all types, is an even tone. Before proceeding to sculpting, it is necessary to prepare the skin well, this was described in detail in one of the previous paragraphs.

A circle

The main goal of makeup in this case is to make a round face more elongated.

Darken the hairline well, without affecting the temples.
On the sides of the lower jaw, apply a dark shade so as to visually narrow them.
Select the cheekbones zone with a sharp line: they should be fairly rough and sharp.
Distribute the highlighter over the chin area.
Add light pigment to the corners of the eyes, to the upper lip, forehead and apples of the cheeks.

Square

The face contouring photo scheme in this case involves the addition of smooth lines and smoothing of all angular contours.

Emphasize the zygomatic bone line with large triangles.
Apply thin black or brown stripes to the top of your forehead.
Add a little dark color along the line of the lower jaw.
Lightly highlight your forehead.
Draw long highlights on the cheekbones.
Highlight the inner corners of the eyes, chin and back of the nose.

Triangle

It is important for girls with a triangular type when applying makeup to balance all proportions.

Apply highlighter around the edges of the jaw.
Add a dark spot to the center of the chin and blend it well.
Along the hairline to the temples draw a wide dark line.
Highlight the cheekbones with the play of light and shadow.
Add shine to other protruding parts as needed.

Oval

How to use a palette for contouring an elongated face? Follow the basic rules. The oval silhouette is considered ideal among makeup artists. It does not need to change anything, just emphasize all the features.

Add a bronzer to the bottom of the chin.
Arc darken the upper part of the forehead.
Highlight the zygomatic bone.
Add a highlighter under the eyebrow, on the tip and back of the nose, on the top of the lips and forehead.

Lip correction

In this case, you can have several goals, and for each of them there is a special method.

Visual increase. To visually visually increase the sponges, you need to take a little concealer or a light corrector without a flickering substance in the composition. A thin white pencil is ideal for this case, otherwise you can use a thin brush. Light or skin cosmetic product, draw a contour. Further, on top of this, you can apply lipstick or gloss, just going beyond the edges and creating the desired shape. You can also take a darker color and already draw perfect lips for them.
Giving sensuality and relief. Many videos on how to do face contouring contain the lessons of sponge extraction. To give them a puffy and passionate look, you need to make a small emphasis on the upper "bow" using a highlighter. This is done with a brush, sponge or (for lack thereof) a fingertip. In the end, you can give the lips a color, but they can be left natural.

After the design of this zone, the contour can be summed up with light powder: this way it will appear more even.

Selection of cosmetics by skin type

No matter how expensive the cosmetic products you purchase, they will not be of any use if they are not suitable for you. Some of them ideally fall on one type, but on the other they roll down and just look disgusting. The dermis, which is characterized by the normal secretion of subcutaneous fat, usually responds well to all textures. What to do to people with other features will be described below.

Oily skin

This article has repeatedly talked about the importance of selecting suitable care products. Contrary to all prejudices, girls with an increased amount of sebaceous secretions on the skin should not dry the epidermis at all. It is enough to choose the right palette. So, cleansing should be done with a foam, and moisturizing with a cream that provides a matting effect. “Tonalnik” you may prefer powder or powder it on top. As for the contouring tools, in this case it is better to give preference to dry textures. You can choose a bronzer or loose pigment. It is important that all cosmetics create a matting effect. Liquid and creamy textures may “leak” or add inappropriate greasy shine. We also advise you to carefully use the highlighter. To avoid the effect of “oil pancake”, apply it only on the tip of the nose and in the corners of the eyes.

Dry

Humidification! Here is the main thing in caring for this type. For washing, it is better to choose a special oil or gentle milk. There will probably be no questions with the cream: it is better to choose something very oily and nutritious. As a tonal base, all creamy textures will suit, starting from the standard “tonal” and ending with bb creams. Powder in these conditions will not be entirely appropriate. The corrector palette should contain gel or liquid cosmetic products. Choosing something nutritious and oily for yourself, you will restore balance, because of this, the entire skin will look healthy and beautiful.

How to do face contouring: step-by-step tips for makeup artists with photos

Feathering! Do not forget to carefully blend the pigment. Otherwise, you run the risk of becoming the owner of ugly coarse stripes that have nothing to do with the shadow effect.
Be original: many decorative products can be used in different situations. Brown shadows can become a corrector and vice versa, while a highlighter can become beautiful shimmering shadows.
You can contour the whole body. Among popular bloggers, a trend recently appeared on drawing the contours of the press and even the chest. By the way, everything looks quite natural, but because this method works!

Cosmetics can work real miracles! Material on the topic "How to make face contouring for beginners step by step" will help you understand the basics of this technique. Experiment and train: everything comes with experience. And any kind of perfume will emphasize the good perfumes that you can pick up for yourself in our online store.

Contour drawing

First you need to make a color sketch of the drawing on paper, which will then be transferred to glass. It is desirable that the color of the composition is combined with the color scheme of the interior. Then it is necessary to print the picture in the desired format on the printer. By the size of the picture, the sizes of the glass are selected.

For the first work with painting, it is better to choose flat glass, since it is more difficult to paint a voluminous object. If you want to paint a bottle, it is better to choose a flat one. Polished mirror glass for painting is practically unsuitable, because the colors on it fit very poorly.

For stained glass, it is permissible to take not only silicate, but also acrylic glass, which is much lighter and cheaper than classic glass, but you can also create any patterns on it.

For staining, you need to take glass products only with a flat and absolutely smooth surface, because when they are processed after the paste dries, all surface defects clearly appear.

Before starting work, the glass surface should be thoroughly cleaned of dust and specks, and then degreased - wiped with acetone, ammonia, white spirit or any other alcohol-containing liquid (you can even use nail polish remover). In extreme cases, the glass should be washed with soap or other detergent.

After that, you should not touch the fat-free surface of the glass with your hands, take it with a permissible clean cloth or hands in cotton gloves. The fact is that any fat forms a layer on the glass, with which the paint comes off very quickly.

Containers with fired and non-fired paints must be closed, so that they do not quickly dry right in the jar.

Sometimes the drawing is transferred to the product using carbon paper, which is placed directly on the glass, and a sketch is placed on top. To avoid shifts when transferring the picture, the carbon copy sketch should be fixed with masking tape. Also, to transfer the picture, you can use the finished stencil from the set or attach a sketch from the back of the glass and translate the image with a felt-tip pen.

When painting bottles and some other items, such transfer methods cannot be applied. In this case, the main lines of the image are applied with a thin color felt-tip pen independently, referring to the original. On these lines, outlined by a felt-tip pen, you need to circle the drawing with a special contour paste for glass, porcelain or metal. Tracing the outline, it is necessary to ensure that the outlines of the parts are closed.

When drawing a contour, you can use nozzles for contours that help make the line on the glass thinner. They are also produced by different manufacturers, so choosing something to your taste is not difficult.

The contour must be applied by evenly and gently pressing on the tube. When performing the 1st work, it is unlikely that the contour line will turn out smooth, since this requires some experience. In this case, you can advise just to continue to work, and after some time the contour line will go smoother and more measured.

When drawing contour lines, you need to lean your hand on the table or on some kind of stand, since a hand that is on a weight without support will tremble. In this case, an even contour line cannot be obtained even with experience. The speed of the hand along the outline of the sketch should be determined independently. It’s more convenient for some to draw quickly, someone prefers not to rush.

In addition, there are various techniques for applying the outline of the pattern. So, you can guide the nozzle nozzle a couple of millimeters from the glass without touching it and stretching the outgoing mass of the contour, while the line is smoother. Some artists drive the nozzle nozzle right on the glass. Gradually, all the outlines of the details of the drawing are circled with contour paste.

If any part of the picture on the panel needs to be highlighted on the stained-glass window, then you can re-draw the outline with a bold line, thus giving the image additional volume and naturalness.

At a certain moment, when most of the picture has already been transferred to glass, you should remove the sketch and look at the picture that is obtained on the glass. It is possible that some details will need to be fixed. Some details are more convenient to draw separately, without a sketch.

Uneven lines can be easily removed with a cotton swab or a corner of a folded napkin immediately, but this method is only available to those who have a very firm hand. By removing part of the line, you can involuntarily grease the remaining edge. Therefore, it is better to act differently: if you need to remove a separate section of the line, you should wait until the contour dries completely, then carefully remove it with the tip of the knife. The dried-up contour is easily removed with one “thread”.

After drawing the contour line, give it time to dry. It may take about 2 hours, but such details should always be specified according to the instructions from the manufacturer.

When circling the lines of the picture with contour paste, the nose of the tube with the contour needs to be cleaned from time to time from excess paint with a napkin. Small blots, blots should be removed with a cotton swab or corner of a folded napkin.

If during operation it is necessary to postpone the circuit for a short time, then it must be definitely closed, otherwise the paste will dry in the nose of the tube and it will take time to clean it. When using the nozzle on the nose of the tube, the hole can simply be sealed with plasticine.

This text is a fact sheet. From the book The Big Book of the Amateur Fisher [with color tab] the author Goryainov Alexey Georgievich

From the book Home Master the author Onishchenko Vladimir

From the book Stained Glass DIY the author Kaminskaya Elena Anatolyevna

From the book Modern apartment plumber, builder and electrician the author Kashkarov Andrey Petrovich

Application of paint After the circuit is completely dry, and it takes from 1.5 to 3 hours, you can start filling the picture with paint, starting with large parts. The technology for applying paint in glass painting differs significantly from the methods of working with other

From the book Engraving Work [Techniques, Techniques, Products] the author Podolsky Yuri Fedorovich

1.8.2. Connection of the drainage circuit The drainage (drain) is connected by analogy with the previously discussed method. The following are some examples. 1.21 and 1.22 show the option of draining from the washing machine by connecting to a siphon system. 1.23 and 1.24

From the Handbook of the painter the author Nikolaev Oleg Konstantinovich

Drawing the image on the workpiece Before starting work, the engraver should check the sharpness of the tool, if necessary, sharpen (finish) the cutting edges of the calms and prepare auxiliary mounting and fixing devices. Then produce

From the book Fashion Tattoos from around the world the author Erofeeva Lyudmila Georgievna

Marking and applying text The quality of the inscription during engraving depends on the correct proportions of the letters, their arrangement in words and the correct choice of spaces between individual words. Therefore, before choosing a metal with a cutter, you need to mark and sketch with a pencil

From the author’s book

Rough drawing drawing So, you liked a certain drawing. Now the master needs to determine the place of its application and apply a draft or outline of the drawing. The method of applying the initial contour is determined by the master himself. This is influenced by many things: personal motives,

From the author’s book

Drawing a tattoo So, the master prepared the skin. It's time to proceed directly to the drawing process. To the area of \u200b\u200bthe client’s skin where it is necessary to make a tattoo, apply paper with a printed image. The master picks up a typewriter - and work