Sewing foot for hidden zipper. How to use the janome zipper foot

Sewing feet make sewing work easier. Thanks to these devices, all operations can be performed accurately. There is a special foot for a hidden zipper, which will help you sew a zipper neatly. In addition to its presence, you need to know how to work with it correctly.

The standard set usually contains no more than 3-5 paws. Universal device, for lightning, zigzag, buttonhole. In expensive cars there can be 10-15 products. If something is missing, then you need to buy more. Sewing on a zipper is a complex procedure, so you need to use a special device in your work. The main thing is that it fits the brand of equipment.

Features of the hidden clasp

This accessory is hidden in the seam of the product, and on the surface there is only a slider. For the standard one, it is located on the side of the teeth, and for the hidden one, from the back. But in some common accessories, the teeth are also covered with braid.

How to choose a zipper? It is necessary to take into account the width, type, density of the fabric. For light material, you need to choose a thinner zipper. The length should be 2-3 cm more than the estimated length of the fastener.

fixture

The hidden zipper foot is used for quality work. It allows you to sew the accessory close to the teeth. But this device is not always included with the sewing machine, but it is on sale. Compared to the standard foot, this foot has the shape of a sole: there are grooves or grooves on the surface.

Now in stores there are a large number of devices. The Janome Concealed Zipper Foot is compatible with Janome equipment. This brand is in demand, so accessories for the typewriter will be in every specialized store. There is a foot for a secret lightning Brother, "Seagull", "Podolsk". Before installing any device, you must read the instructions for this work, which is contained in the manual.

The foot for sewing in a hidden zipper is usually selected for the model of the machine. But these devices have nuances:

on the "leg";
with removable part;
with screw fixation.

Products are metal and plastic. The former are considered more durable, so they will work best for long-term use. Gradually, the foot is deformed by the needle, which worsens its sliding. Therefore, the quality of work is reduced. But if you need a one-time foot for a hidden zipper, then plastic is quite suitable.

Insert

How is the hidden zipper foot installed? It is usually attached to the left of the needle so that the straight stitch guidelines are visible. There is a screw on the back of the foot, it must be unscrewed, after which it can be inserted. At the end, tighten the screw, and this completes the insert. The hidden zipper foot can be used as intended.

What is required for work?

In addition to a sewing machine with a special foot, this work requires:

zipper;
ruler;
pins;
needle and thread.

It is important to check the thread tension - top and bottom. If it is strong, then it must be loosened so that the accessory does not bulge during stitching.

What threads are needed?

Threads are needed to match the material of the fastener. The line will not be visible on the right side. On the inside, everything should be neat. The quality of the fabric plays an important role. New quality threads are needed. Their thickness should fit the canvas. For thin fabrics, thin threads are selected, and for dense ones, strong ones.

Using a non-woven strip

Sew on a fastener so that there is no stretching of the fabric, it is quite simple. Seam allowances must be glued with fleece strips. For this, apply:

Formband. It is presented in the form of an oblique non-woven inlay, which is used on oblique cuts.
Kantenband - non-woven strip, glued with a 1 mm overhang on the seam.

You can also cut strips from the canvas yourself. They will perform similar functions.

Features of work

A special instruction is used to sew in the fastener. From the inside of the product, measure 1.5 cm from the edge and draw a line on both sides. Strips of interlining are glued to the allowances. For rough materials, you can not use them. The seam must be basted according to the markup, and then overcast with an overlock. Then he is ironed.

A fastener must be attached to the place of sewing in a closed form. Chalk should make marks on the seam allowances and the ribbon of the accessory. This is necessary for better stitching. The pins must be inserted across the fastener and secured with seam allowances. Baste a zipper on them with piercing only one layer of material. After removing the pins, it is necessary to remove the seam basting, open the fastener.

After that, you will need a foot for sewing on a hidden zipper. It is necessary to scribble until it rests on the clasp. Then it is important to fasten it to look at the evenness of sewing on the accessory. The side seam must be completed so that the bottom bartack is not visible. It is located approximately 0.5-0.7 cm below the end of the seam. At the end, the basting must be removed.

The foot, in addition to sewing on fasteners, can be used to finish the edges of products. For example, for attaching tubes to products, as well as for those areas where it is difficult to use a standard fixture. This tool is needed to create edge seams.

Most feet have a screw that adjusts the position of the presser. If it is not tightened, the clamping part will vibrate. Then the needle will stick into the foot, which will break the needle. Although you can attach a fastener with an ordinary foot, it is better to use a special one, since this will allow you to do the job much better.

The product you have purchased is a branded product, manufactured with high precision and using the most modern technologies. The product and its packaging comply with all requirements of the technical regulations (technical regulations) of the Customs Union.

For your convenience and to avoid damage, please read the user manual before use.

For additional accessories, needles, presser feet, etc., ask at retail stores.

General provisions:

1) The warranty period starts from the date of sale to the end customer.

2) The warranty period is determined by the manufacturer and is indicated in the information sheet, which is part of the instructions. The manufacturer provides all consumer rights related to the warranty in accordance with the laws of the country where the goods are sold. The retailer, at its discretion, may extend the warranty period for the goods. In this case, all costs for additional warranty service are borne by the seller.

3) The product is intended for domestic use only. If there are traces of commercial operation (cooperatives, factories, ateliers, courses, etc., as well as in individual labor or private entrepreneurial activity, educational and production process), the machine is removed from the warranty and is not subject to free service during the warranty period.

4) Faulty components and assemblies are repaired or replaced by new ones free of charge during the warranty period. The decision on the advisability of their replacement or repair remains with the Service Department. Replaced parts become the property of the Service Department.

Conditions for obtaining a guarantee:

5) The warranty card is valid in the presence of correctly and legibly indicated: model, serial number of the product, date of sale, clear stamps of the seller, signature of the buyer. The model and serial number on the product must match those on the warranty card. If these conditions are violated and if the data specified in the warranty card is changed, erased or overwritten, the warranty card is invalidated. If the date of sale cannot be determined, in accordance with the Law "On Protection of Consumer Rights", the warranty period is calculated from the date of manufacture of the product.

This warranty does not cover:

1) For damaged products:

due to operation not in accordance with the instructions, in case of careless handling of the product, in cases of flooding, falling, impact and other external influences;
in case of modification and repair of the product produced by unauthorized persons;
from exposure or ingestion of moisture, sand, dust, aggressive environments, as well as insects, rodents, pets, etc.;
in case of force majeure (fire, natural disaster, etc.).

2) The warranty does not cover defects and wear and tear for sewing machines and overlockers - needles, needle plates, drive belt, feed dog, bobbin holder, adapter, needle holder, needle bar, needle threader, overlock knives, presser feet, spool holders, light bulbs, loopers, etc. . P.

The manufacturer's warranty does not include:

1) Routine maintenance, installation and configuration of the product.

2) Service at the owner's home.

3) Cleaning (lubricating) and other maintenance of the mechanism in accordance with the instructions is the responsibility of the owner. If the maintenance conditions are not observed, at the discretion of the Service Department, the machine may be withdrawn from the warranty.

What's special about the zipper foot?

The main feature of this sewing foot is that it can be adjusted so that its pressing part is to the left or right of the needle. This is necessary so that, during sewing on the zipper, the teeth of the zipper are not pressed with the foot.

Where can I buy a zipper foot?

If you are buying a new sewing machine, then this type of sewing foot is usually included in the standard set of sewing machine accessories. But if the machine is not new, or the foot is lost, then you will have to visit the nearest sewing equipment store, where they will help you find the right zipper foot for your machine. They will help if they can. If the model of your sewing machine is already outdated, or little known, then you may have to visit the store, taking your machine with you. The best solution is to find the manual for your sewing equipment and see which presser feet are suitable for your projects.

What are the best zipper feet?

Yes, zippers can be of different types. It's a matter of personal preference. It may also be that a certain model of a sewing foot is best suited for a certain model of a sewing machine. Some seamstresses find ultra-thin types of zipper feet comfortable. And no wonder - with a thin foot you can crawl anywhere, as well as sew on narrow zippers. Some paws seem too wide and awkward, but this is only at first glance. In fact, they can perform surprisingly well. So choose the paw to your taste.

Where else can a zipper foot come in handy?

The foot can be used to finish the edges of garments. For example, for sewing tubes to products, and wherever it is impossible to crawl to the desired area with other paws. This foot allows you to seam along the edge without tucking in things that don't need to be tucked in, such as frills and other trims.

What are the main mistakes in working with zipper feet?

Many of these presser feet have a screw that secures the position of the presser foot when you select the sewing side. If you forget to tighten the screw, the presser part will vibrate from side to side while sewing, and the needle may stick into the presser foot or break off the presser foot. You will definitely need to change the needle in your sewing machine.

Special foot for hidden zipper

The hidden zipper can be sewn on with a regular zipper foot. There are also special feet for hidden zippers, but some seamstresses cannot get used to them - you can sew on a hidden zipper just as well with a regular zipper foot. "Why?" - you ask?. Why then did they come up with a special highly specialized foot for sewing on hidden zippers, since everything can be done using a regular zipper foot. The hidden zipper foot has grooves through which the teeth of the zipper pass. And here the problem of the passage of the teeth of the lightning through the grooves may arise. The size and length of the zipper teeth of different manufacturers may vary. You may have problems with such a foot, and you will get wrinkling of the seams on which the zipper is attached. So get a simple zipper foot, and you will definitely succeed.

Sewing feet not only speed up and facilitate the work of a seamstress, but also allow you to perform this or that operation flawlessly. Try to sew on a hidden zipper with a regular foot, and you will easily see this. And with the help of a special foot for sewing on a hidden zipper, this complex and painstaking operation is performed accurately and quickly, in just a few minutes.

In this article, we will show two types of presser feet that can be used to sew on a blind fastener (lock). And also we will tell you some of the nuances that affect the quality of sewing on a hidden zipper.

If your sewing machine has such a bulky foot in the set of legs, then know that it is ideal for sewing on a hidden zipper. But it also has a number of other functions, such as sewing a cord in a zigzag pattern, etc.

If you are an experienced person, then you can skip this step. And if you are just learning to sew, then before attaching a zipper with a special foot, make a “basting” line with a regular foot along the edge of the lock tape. Set the stitch step to the maximum, do not make backtacks, because in the future this stitch will need to be removed.

Now it will be convenient for you to adjust the zipper with the help of a special foot, since the lock tape is fixed, it will not move or move to the side.

Twisted (regular) zipper foot

Such a foot, designed for sewing in a conventional zipper (twisted or tractor), is available in a set of feet for almost any sewing machine. It can also be used to sew on a hidden zipper, but already with some experience and skill.

This photo shows how to sew on the zipper tape on the right side.

This photo shows how to sew the zipper tape on the left side. To do this, you just need to rearrange the sole of the foot to the other side.

The advantage of this foot is that the zipper can be attached to both sides of the zipper in the same direction. This is very important sometimes for fabrics and materials (leather) that give a strong fit, plaid fabrics, etc.

The disadvantage of using such a foot is that the line does not go close to the teeth of the lock, in any case, not as tight as with a foot specially designed for sewing on hidden zippers. By the way, these paws come in various designs and are made of either metal or plastic. Metal paws are more reliable, but at the same time more expensive.

As for the question of which one to choose, then buy what is easier and cheaper. Anyway, in the end, the hidden zipper is sewn not by a foot, no matter how special it would be, but by your hands and head.