Crochet ballet shoes with soles. Original crocheted ballet slippers: simple and convenient. Knitting booties-ballet shoes master class

Sometimes it can be very difficult to please a little fashionista. During the cold season, children's feet must be kept warm. We offer an example of crocheting children's ballet shoes; a diagram with a description will help you make the product much faster. This will be the optimal solution for the yoke. After all, the decor can be very diverse.

For a little girl

Let's look at the example of knitting ballet shoes for a 5-6 year old girl. To begin with, let’s take the simplest solution, which even a novice needlewoman can handle. The description will contain both diagrams and description.

So, we will need: a crochet hook size 2.5-3.5, a skein of thread to your taste, preferably darker (it’s more practical), contrasting threads for decoration.

We knit the next row with double crochets. Knitting is circular, that is, we tie strips of air loops on both sides. We knit six double crochets into the last loop.

We unfold the knitting and knit double crochets in the opposite direction. In the original loop, we finish the row by knitting 5 double crochets in it (in total there will be 6 of them in the 1st loop). We knit a connecting post.

Let's move on to the next row. We knit 14 single crochets. Then 9 double crochets. In the next 6 loops we knit 2 loops with a crochet. And then on the other side, similarly, 9 double crochets and 14 single crochets. In this way, we widen one side of the sole of the ballet shoe so that it follows the shape of the foot.

In order for the knitting to be more even, the next row we knit one double crochet in each loop, with the exception of the toe and heel. There we knit it like this: two double crochets in one loop, then 1 double crochet, and then again two double crochets.

The insole is ready. For the second sole, repeat all steps 1-5.

Let's start knitting the top. It is necessary to grab only one loop with a crochet hook. This will allow the knitting to rise up. We recommend knitting the first row of the top with embossed stitches. But they can also be replaced with the usual double crochets.

We knit the second row of the top with double crochets in each loop.

The third row is knitted with single crochets.

We knit the fourth row with single crochets, but with decreases. You need to make seven contractions in the toe: every two columns.

We continue to make cuts, knitting with single crochets.

Fifth row. Seven cuts: two loops together through one skip loop. Sixth row. Seven layoffs in a row. The seventh row contains only two abbreviations.

One slipper is ready. For the second, repeat steps 7-11.

For beauty and elegance, we tie the ballet shoes in single crochets with a contrasting thread. You can make and sew pompoms from the same thread.

If difficulties arise during the work, a video on the process of knitting different types of stitches can be found on the Internet or at the end of our article.

The ballet shoes are ready. If in this example you use yellow rather than white thread, you will get dandelion ballet shoes. For decoration you can use ribbons, beads or ready-made stripes. It would be a very original solution for a girl to use a shiny gold or silver thread as a decorative thread. Another beautiful and popular solution can be knitting ballet shoes from garden thread.

For felt soles

Over the past couple of years, crocheting home ballet flats and slippers with felt soles has gained great popularity. In this case, the sole is not knitted, but cut to the shape of the child’s foot from a purchased insole. Then the insole is evenly sheathed with thread. This is done so that you can start knitting. Then it continues according to the selected description or diagram.

Booties for newborns

If you or someone you know is expecting a new baby, newborn booties will be a good attribute for a discharge, christening, photo shoot, or just for regular walks. Such a thing can be a good gift and memento. You can connect them very simply and quickly.

By using different types of decor, such booties can be an excellent gift for the New Year holidays, March 8, or simply for any memorable date.

A master class on crocheting everyday booties for a newborn girl is attached below.

We will need: a hook of 2-3 sizes, 2 colors of thread, possibly leftovers. Don't forget about the composition of the threads.

Craftswomen who want to make gifts for loved ones with their own hands can try making home shoes. You can crochet ballet shoes in one evening; a step-by-step detailed diagram describing the entire creative process will help you easily and quickly prepare warm and beautiful slippers for your household.

Small and large, high and low, with or without an insole - the variety of ways to make knitted shoes allows you to choose the appropriate option for a girl, a boy or an adult.

In this article, with a step-by-step description, two options for ballet shoes will be considered: booties for a baby and felt slippers for an adult.

Learning to crochet warm ballet shoes: diagram with description

Master class on making ballet shoes with felt soles. An insole of this texture will soften the foot when walking and help retain heat. You can use other material, such as suede or artificial leather.

You will need:

1) Felt insoles;

2) Hooks with numbers 2 and 3;

3) Yarn of the desired color;

6) Scissors.

Knitting pattern:

Manufacturing process:

1) Make holes in the insoles using an awl at a distance of several millimeters from each other. Then knit intermediate air loops around the entire perimeter. The result is a sole tied with single crochets.

2) We tie the insole with yarn, but you can also leave it with felt.

3) Making the upper part of the slippers. We cast on 5 chain stitches in the first row, to knit the next row we turn the workpiece over and add 1 lifting loop.

4) Then add loops, knitting 2 columns from one loop.

5) We do the next row without adding. You should get 20 loops.

6) Then we make an increase of two single crochets on both sides of the knitting row.

7) In the following rows you should increase to 28 loops.

8) Then we knit the 11th row in single crochets, making a shell.

10) To complete the work, sew the resulting top to the insole and tie the outline with a “shell” pattern.

Not everyone can knit small ballet shoes, also called booties. To make this wardrobe item you will need a little patience and at least basic crochet skills. After mastering simple models, you can start making various animals for boys, flowers and fruits for coquette girls, which will make your child’s shoes original and beautiful.

Next we will tell you how to knit a simple model of booties. Warm slippers are perfect as gifts for newborn babies. We take the size of the foot to be 10 cm, since the length of the foot of a born baby is usually from 7 to 10 cm.

You will need:

1) Acrylic yarn in blue and white colors;

2) Crochet hook;

3) Scissors.

Stages of work:

1) Let's start working with blue yarn. We cast on 12 air loops and another 3 lifting air loops, then place the hook in the fourth loop from the hook. We knit 3 rows in a similar way.

2) We knit the next row in white. In the fourth row, we knit a single crochet loop into each column (a total of 56 loops). We do the fifth row in the same way.

3) We switch to blue yarn again. We knit the so-called “bump”, which consists of 2 air loops, 2 unfinished stitches and another air loop. Next, we make a loop and knit the “bump” again. After that - an air loop. We arrange the entire row in a similar way and close it. We do the same actions with the seventh row.

4) Break the thread and mark the middle. Let's start knitting the toe. To do this, we knit a “bump” from two unfinished loops with a white thread, inserting the hook into the back wall of the loop.

5) Then we make the same “bumps” from three unfinished loops. There will be 14 pieces until the middle. The outermost “bump” will be made of two unfinished loops.

6) Turn the product and knit further in the same way. It turns out 7 “bumps” that need to be connected.

7) Then we knit 4 “bumps” and finish the row in the same spirit. Next we make 2 more rows in the same way.

8) Take blue yarn, which we will use to decorate the edges of the booties. To do this, we knit 3 air loops for each column.

These are such cute booties! This pattern is perfect for a boy, but for a girl you can use yarn of other colors, for example, pink, green or yellow.

Video materials on the topic of the article

Below are video tutorials on how to create original ballet shoes using other performance techniques. These materials will help you understand unclear points, which is especially important for beginning craftswomen. They will also inspire you to create original wardrobe items that will delight your friends and family for a long time.

To crochet ballet slippers, you need to find diagrams and descriptions on the Internet or in specialized literature. These shoes are very comfortable, although not everyone can wear them. It should be borne in mind that knitted ballet shoes are exclusively indoor shoes, and, unlike real leather ballet shoes, they are not suitable for dancing and gymnastics. If you neglect this rule, you can get serious injuries.

Benefits of knitted ballet shoes

Crocheted ballet shoes with patterns can be found in any women's magazine, as well as in many books on needlework. Patterns can be of different levels of complexity, as well as with different pattern options, it all depends on how much the needlewoman has basic crocheting skills. Patterns can also be different. Of course, it's easiest to make a single-color shoe, but two-color ballet flats can be easily done. It is undoubtedly worth making original home slippers yourself, because:

Orthopedists recommend wearing knitted house shoes without heels for those who suffer from arthrosis and have a pronounced bunion on the foot. If you use dog or camel hair for knitting, such shoes will also have a healing, warming effect. This is a great option for older people.

Materials required for work

A novice needlewoman, in addition to a pattern and a hook, will need:

You should also take care of the fabric for high-quality insoles. For children, it is best to use orthopedic insoles. Ordinary ones are possible, but the main thing is that children’s shoes must have insoles. Orthopedists categorically do not recommend children and adolescents wear ballet shoes without insoles, as this interferes with the correct formation of the arch of the foot.

Adults can independently choose the option they like best: with or without insoles. To prevent knitted shoes from getting dirty, you do not need to wear them on bare feet. You can wear thin nylon or knitted socks inside. There is no need to wear woolen socks, otherwise the ballet flats may stretch out too much.

General description of the process

Not only a master of needlework can handle making ballet shoes, but also a beginner who is just learning to use knitting needles and crochet. The main thing is to choose a convenient scheme for work and. Here is a rough job description:

Convenience of homemade shoes

Before attending a master class on knitting homemade soft shoes, you need to know that not everyone can wear such ballet shoes. It is not recommended to wear such slippers for those who suffer from flat feet. Also, children and teenagers should not wear these shoes for a long time, because they have a bad effect on posture and gait when worn for long periods of time.

Also, before knitting ballet shoes, you need to know your foot size, because shoes that are not the right size will be uncomfortable to wear. Ballet shoes that are too large will not fit well on the foot, while ballet shoes that are too small, on the contrary, will press and rub the foot. If you plan to wear shoes with socks, you should make them a little larger. If you plan to wear shoes on bare feet, the size should be exactly what you need.

To make shoes truly comfortable, you need to take the manufacture of insoles seriously. To make insoles, you need:

When the insoles are inserted, they must be properly straightened so that they do not wrinkle or bulge anywhere. If wearing shoes causes discomfort, you should remove the insole, because foreign bodies may roll into it, causing pain when walking.

You should not use prickly yarn or yarn that is highly electrified for knitting ballet shoes, otherwise such shoes will cause severe discomfort when worn.

Decor options for knitted items

Knitting lovers decorate shoes according to their imagination. Possible decoration options include embroidery from beads, sequins and satin ribbons. You can also embroider the noses of the slippers in the shape of the faces of wild or domestic animals; such shoes will certainly appeal to young children. Crocheted ballet shoes can also be decorated with multi-colored laces, which are threaded into holes specially prepared for them.

When knitting, you can use decor from alternating strips of yarn of different colors. A checkerboard pattern will also look good: black and white, black and yellow, red and white, blue and white. The stripes on slippers can be zigzag, wide and narrow stripes can alternate with each other. Plain shoes also look great, especially if you decorate them with decorative elements, such as flowers.

You should not use any brooches as decoration, because the brooch can come unfastened and injure your leg. Ballet shoes trimmed with lace look beautiful, but such decor, as a rule, quickly gets dirty and loses its presentation.

You should not choose too bright and light fabric for knitting, as ballet flats will quickly get dirty. Colors that work well include navy blue, dark red, light green, black and brown. Yellow or orange shoes will also look smart. It is not recommended to choose white and hot pink for reasons of practicality.

Ballet shoes, knitted or crocheted, will serve as a wonderful gift for those who love handmade things. You can link them quite easily, if you choose a simple scheme. Such shoes will last a long time and will be pleasing to the eye if you take proper care of them: do not wash them in a washing machine and do not wear them outside. When making house shoes, you need to take care not only of beauty, but also of convenience; the second factor is much more important than the first. In warm knitted shoes a person will feel comfortable, and their steps will be soft and silent.

Crochet ballet shoes

Charming indoor ballet shoes, crocheted and decorated with a satin bow.

So let's start with the materials. My yarn is half wool. For the sole a little thicker ALIZE Lanagold 100g/240m, and for the rest of the YarnArt Merino De Luxe/50 100g/280m.

The hooks are also different for each yarn. I crocheted the sole with crochet No. 3, and the top with my favorite crochet No. 2.1.
We will also need a satin ribbon 5 cm wide. But this is optional, you can decorate your ballet shoes with a knitted flower or pompoms, as you please.

Abbreviations:
sc - single crochet
psn - half double crochet
dc - double crochet
increase - knit 2 stitches in 1 loop
decrease - knit 2 stitches together

Now to the point!

I’ll say right away that I don’t count every stitch; I count the initial number of stitches and carefully remember how many increases and decreases are made in each row.

SOLE
1r. We dial 40 VP.
2 rub. In the second loop from the hook we knit 2 sc, then 19 sc, 1 hdc, 17 dc, in the last ch we knit 5 dc and continue to knit symmetrically on the other side of our chain of ch 17 dc, 1 hdc, 20 dc, finishing the row with a connecting stitch.

7p. Similar to the previous rows, only we knit dc, keeping 5 increases (above the increases in the previous row) on the toe and 3 increases on the heel.

You need to knit 2 or 4 of these soles, as desired. I knit 4, as my dad says, regarding shoes - the higher you are from the ground, the warmer it is. Of course, we won’t be walking on the ground in them, but still, the double sole is warm =)

1r. Place the two soles together, inside out, and crochet along the edge. It's better to start from the heel.

8 rub. We begin to form the toe. in this row we need to make 5 decreases on the toe. To do this, we find the middle on the sock and count 14 stitches back from it - and knit the first decrease, then 5sc and decrease again, repeat this fragment so that there are 5 decreases in total. We knit sc to the end of the row.

9r. There should be 7 decreases in this row. We knit a sc to the toe, on the toe from the first decrease in the previous row we count 6 loops back and knit a decrease, then 4 sc and a decrease again, repeat this fragment so that there are 7 decreases in the row.

10 rub. We knit a row of sc, continuing to decrease on the toe, in this row after 3 sc. We simply knit decreases over the decreases that were in the previous row.

11r. We knit a row of sc, continuing to decrease on the toe, in this row after 2 sc. We simply knit decreases over the decreases that were in the previous row.

12 rub. We knit a row of sc, continuing to decrease on the toe, in this row after 1 sc. Having knitted the last decrease and 2 more sc, ATTENTION! unroll the knitting! and knit in the opposite direction (we knit above the fingers so that the ballet shoes are deeper) It should turn out like this:

To do this, we knit 4 short rows (back and forth above the toe), knitting a decrease in the middle of each row. We continue to knit the last row in a circle, and above the heel we make 3 decreases after 2 sc, so that the slipper does not slip, but stays well on the leg.

The final stage
We need to tie our ballet shoes around the edge to hide the unevenness on the toe and give them a finished look. To do this, we again take darker threads and tie the top of the ballet shoes. I knit not on the top row, but on the penultimate row, so that the loops seem larger, and not in each loop, but through one, then the edging also tightens the top, again, in order to so that the ballet shoes do not slip off your feet.

All that remains is to hide the threads so they don’t unravel, after all, shoes, and decorate them with a bow or flower.

I tied the bow one by one on a fork, but I didn’t have a fork of that size, so I asked my beloved to spread his fingers and be a “fork” for a short time =)))

And here is a video tutorial on knitting such ballet shoes:

Good luck and inspiration!

Taking a hook in your hands, you can easily knit comfortable and stylish ballet slippers yourself. The pattern is so simple that even a novice needlewoman can master it.

For slippers size 37 - 39 you will need:

90-110 m of medium thickness yarn;
hook with a diameter of 3.25 mm.

Nuances regarding knitting

Yarn consumption is approximate. It will depend not only on the size of the product, but also on the density of knitting.
At the beginning of each row, 2 air loops are knitted, which do not participate in the calculations (sometimes they are called lifting ones).
The slippers are knitted alternately.

Knitting ballet shoes step by step

Let's start with the sock. First, we make a ring of air loops, sufficient to pass 10 double crochets through it.

Row 2 will already consist of 20 columns. Through each double crochet of the previous row we knit 2 stitches.

In the 3rd row there will already be 30 loops. To obtain this result, we attach 2 double crochets to every second double crochet.
We knit rows 4 to 9 with a double crochet, not forgetting to make lifting loops at the beginning of each row.

From the 10th row we begin to create a pattern. Knitting sequence: 2 lifting stitches, 21 double crochets, 2 chain stitches, 9 single crochets, 2 chain stitches, half double crochet.

11th row: 2 lifting loops, 21 double crochets, 4 chain stitches, 7 single crochets, 2 chain stitches, half double crochet.

12 row: 2 lifting loops, 21 double crochet, 6 chain stitches, 5 single crochet stitches, 2 chain stitches, half double crochet.

13th row: 2 lifting loops, 21 double crochets, 8 chain stitches, 3 single crochets, 2 chain stitches, half double crochet.

The 14th row consists of 2 lifting loops and 21 double crochets. From this moment on, knitting stops going in the round. To maintain the pattern of the pattern, the knitting must be turned over at the end of each row.

In the 15th row we increase the number of double crochets by 2, making additions along the edges, we get 23 loops.

16 row; 2 lifting loops, 23 double crochets.

Row 17: similar to 15. At the exit we get 25 loops.

Subsequent rows consist of 25 double crochets. So we knit to the desired length, not forgetting to turn the knitting. Taking into account the fact that knitted items stretch, the last row of straight fabric should fall in the middle of the heel. Otherwise, the ballet slippers will slip off your feet.